Four different types of three-body model composed of rock and coal with different strength and stiffness were established in order to study the failure characteristics of compound model such as roof-coal-floor. Throug...Four different types of three-body model composed of rock and coal with different strength and stiffness were established in order to study the failure characteristics of compound model such as roof-coal-floor. Through stress analysis of the element with variable strength and stiffness extracted from the strong-weak interface, the tri-axial compressive strength of the weak body and strong body near the interface as well as the areas away from the contact surface was found. Then, on the basis of three-dimensional fast Lagrangian method of continua and strain softening constitutive model composed of Coulomb-Mohr shear failure with tensile cut-off, stress and strain relationship of the four three-body combined models were analyzed under different confining pressures by numerical simulation. Finally, the different features of local shear zones and plastic failure areas of the four different models and their development trend with increasing confining pressure were discussed. The results show that additional stresses are derived due to the lateral deformation constraints near the strong-weak interface area, which results in the strength increasing in weak body and strength decreasing in strong body. The weakly consolidated soft rock and coal cementation exhibit significant strain softening behavior and bear compound tension-shear failure under uni-axial compression. With the increase of confining pressure, the tensile failure disappears from the model, and the failure type of composed model changes to local shear failure with different number of shearing bands and plastic failure zones. This work shows important guiding significance for the mechanism study of seismic, rock burst, and coal bump.展开更多
As develops in deep sub micron designs,the interconnect crosstalk becomes much more serious.Espe cially, the coupling inductance can not be ignored in gigahertz designs.So shield insertion is an efficient techniq...As develops in deep sub micron designs,the interconnect crosstalk becomes much more serious.Espe cially, the coupling inductance can not be ignored in gigahertz designs.So shield insertion is an efficient technique to reduce the inductive noise.In this paper,the characteristics of on chip mutual inductance (as well as self) for coplanar,micro stripline and stripline structures are introduced first.Then base on the coplanar interconnect structures,the effective coupling K eff model and the RLC explicit noise model are proposed respectively.The results of experiments show that these two models both have high fidelity.展开更多
Finding channel sandbodies is an important task in oil and gas exploration due to the importance of fluvial reservoirs. It is difficult to describe fluvial reservoirs in detail owing to their frequent changes and seri...Finding channel sandbodies is an important task in oil and gas exploration due to the importance of fluvial reservoirs. It is difficult to describe fluvial reservoirs in detail owing to their frequent changes and serious intersections, as well as limitations of S/N ratio and seismic data resolution. Based on the Laohekou 3D data in Shengli Oilfield, we analyze the general characteristics of fluvial reservoirs in this area, from which we find that they are characterized by strong amplitudes on seismic profiles, high continuity on time slices, and low frequency in the frequency domain. In addition, a cluster of strong string-bead- like reflections was found after color processing and detailed interpretation. To understand this observation, we conduct forward modeling to explain the mechanism. This provides a new way to identify ancient channels in similar areas. By using the multi-attribute fusion and RGB display techniques, channel incision is more obvious and the characteristics of the channel structures are manifested much better. Finally, we introduce and apply multi-wavelet detection technology to identify weaker fluvial reservoir signals.展开更多
The signal integrity problem in 0.18μm CMOS technology is analyzed from simulation.Several rules in this phenomenon are found by analyzing the crosstalk delay and noise,which are helpful for the future circuit design.
基金Project(51174128)supported by the National Natural Science Foundation of ChinaProject(20123718110007)supported by the Specialized Research Fund for the Doctoral Program of Higher Education of China
文摘Four different types of three-body model composed of rock and coal with different strength and stiffness were established in order to study the failure characteristics of compound model such as roof-coal-floor. Through stress analysis of the element with variable strength and stiffness extracted from the strong-weak interface, the tri-axial compressive strength of the weak body and strong body near the interface as well as the areas away from the contact surface was found. Then, on the basis of three-dimensional fast Lagrangian method of continua and strain softening constitutive model composed of Coulomb-Mohr shear failure with tensile cut-off, stress and strain relationship of the four three-body combined models were analyzed under different confining pressures by numerical simulation. Finally, the different features of local shear zones and plastic failure areas of the four different models and their development trend with increasing confining pressure were discussed. The results show that additional stresses are derived due to the lateral deformation constraints near the strong-weak interface area, which results in the strength increasing in weak body and strength decreasing in strong body. The weakly consolidated soft rock and coal cementation exhibit significant strain softening behavior and bear compound tension-shear failure under uni-axial compression. With the increase of confining pressure, the tensile failure disappears from the model, and the failure type of composed model changes to local shear failure with different number of shearing bands and plastic failure zones. This work shows important guiding significance for the mechanism study of seismic, rock burst, and coal bump.
文摘As develops in deep sub micron designs,the interconnect crosstalk becomes much more serious.Espe cially, the coupling inductance can not be ignored in gigahertz designs.So shield insertion is an efficient technique to reduce the inductive noise.In this paper,the characteristics of on chip mutual inductance (as well as self) for coplanar,micro stripline and stripline structures are introduced first.Then base on the coplanar interconnect structures,the effective coupling K eff model and the RLC explicit noise model are proposed respectively.The results of experiments show that these two models both have high fidelity.
基金sponsored by The Science and Technology Research Project,Shengli Oilfield (Grant No. YKW1002)
文摘Finding channel sandbodies is an important task in oil and gas exploration due to the importance of fluvial reservoirs. It is difficult to describe fluvial reservoirs in detail owing to their frequent changes and serious intersections, as well as limitations of S/N ratio and seismic data resolution. Based on the Laohekou 3D data in Shengli Oilfield, we analyze the general characteristics of fluvial reservoirs in this area, from which we find that they are characterized by strong amplitudes on seismic profiles, high continuity on time slices, and low frequency in the frequency domain. In addition, a cluster of strong string-bead- like reflections was found after color processing and detailed interpretation. To understand this observation, we conduct forward modeling to explain the mechanism. This provides a new way to identify ancient channels in similar areas. By using the multi-attribute fusion and RGB display techniques, channel incision is more obvious and the characteristics of the channel structures are manifested much better. Finally, we introduce and apply multi-wavelet detection technology to identify weaker fluvial reservoir signals.
文摘The signal integrity problem in 0.18μm CMOS technology is analyzed from simulation.Several rules in this phenomenon are found by analyzing the crosstalk delay and noise,which are helpful for the future circuit design.
