长护险的“交织”与“分离”——以上海为例

随着人口老龄化趋势的加剧,长期护理的需求日益增加,因此建立独立的长期护理保险制度势在必行。本文探讨了长期护理保险与基本医疗保险之间的“交织”与“分离”关系,进一步明确,建立独立的长护险制度能更好地满足长期护理的特殊需求,避免费用混合和资源浪费,并提高系统透明度和管理效率,进而提升长期护理服务的质量与可持续发展。本文希望通过该讨论,为改进和完善长护险制度做出些许边际贡献。

Capacity model of on-rampmerging section of urban expressway

To establish the empirical capacity model of an on- ramp merging section, the Erlang distribution is first selected to define the time headway distribution, and then the gap acceptance theory is applied to develop the basic capacity model of the on-ramp merging section. Since not all the time headways on the shoulder lane can be made full use of by on- ramp vehicles, a modified capacity model is developed, which takes the usage probability of time headway into consideration. Then, a model of capacity discount coefficient ~： is developed. Finally, based on the modified capacity model and the model of capacity discount coefficient, an empirical merge capacity model which contains the shoulder lane volume, critical gap, and the distance from nose to merging point, is constructed. Results show that, compared with other models, the proposed model is more reasonable since it takes merging section geometry into consideration, and it is easy to apply. The merge capacity varies with the shoulder lane volume, the critical gap, the distance between the nose and the merging point, and the design velocity of the shoulder lane and ramp.

Design and Implementation of Programmable RS Codec Module in Satellite Communication Modem

In the study and implementation of a programmable RS codec module in satellite communication modem, FPGA is used as the kernel in the implementation, while some ASICs are used as necessary assistant measures. The module includes the RS codec unit, the interleaver and deinterleaver unit, the scrambler and descrambler unit and the frame synchronization unit. The module is realized successfully and it can be programmed on-line to meet the requirements of IESS 308/309/310 including many specifications about different service types and data rates. With the implementation combining FPGA with ASICs, size of the circuit is much reduced, its flexibility dramatically increased, and its stability further strengthened. Furthermore, the module is based on the software radio concept and can be easily integrated into the whole satellite communication modem.

A Comparative Study on Detection of the Expression of Alternative Oxidase in Tobacco Callus with the Monoclonal Antibody Against Alternative Oxidase and Antibody Against-Synthetic Polypeptide Antibody

从经过不同温度处理的烟草 (NicotianarusticaL .)愈伤组织中提取并纯化线粒体蛋白 ,分别与交替氧化酶的单克隆抗体和抗合成多肽抗体进行免疫杂交。结果表明 :交替氧化酶的含量随温度的下降而显著上升 ;单克隆抗体的特异性较高于抗合成多肽抗体 ,但后者与交替氧化酶同样有良好的亲和性。因此 ,用合成多肽方法制备的抗体可以用于交替氧化酶的研究中。

Short-span interleaving based selected mapping

A novel interleaving based selected mapping （SLM） scheme to depress the relatively high peak power of transmit signals in multicarrier communications is proposed. In the scheme, a group of bit-level interleavers spanning only a few bits are used to produce multiple sequences representing the same information, and one of the sequences resulting in the lowest peak-to-average power ratio （PAPR） is selected for transmission. The implementation of the scheme including the structure of the short-span interleaver is illustrated. The performance of this PAPR reduction scheme is investigated by simulations. This scheme exhibits a good PAPR reduction performance, and for signals of high level modulation, such as 16QAM and 64QAM, it approaches the best performance of all SLM schemes. Compared to the conventional interleaving SLM, this short-span interleaving SLM results in a very short time delay, requires very few register units for buffering, and can be easily implemented by hardware.

An improved linear dispersion codes transmission scheme based on OSIC detection

Linear dispersion codes (LDCs) were originally designed based on maximum likelihood detection. They do not have good performance when using ordered successive interference cancellation (OSIC) detection. In this paper,we propose a new improved linear dispersion codes transmission scheme to combat performance loss of original LDCs when using OSIC detection. We introduce an interleaver to each data substream transmitted over different antennas after LDCs encoder. Furthermore,a new computer search criterion for a linear transformation matrix is also proposed. New search criterion is to minimize the symbol error rate based on OSIC detection. Computer simulations show that the performance of proposed LDCs transmission scheme is better than the original LDCs.

Temperature Effect on the Life History of Three Types of Brachionus calyciflorus Females

The effect of temperature on the life history characteristics of amictic females (AF), unfertilized mictic females (UMF) and fertilized mictic females (FMF) in Brachionus calyciflorus was studied with replicated individual cultures at 20℃,25℃ and 30℃, and with algae Scenedesmus obliquus for their food. There were highly significant effects of both temperature and female type, independently and interactively, on the duration of juvenile and post-reproduction periods, and the number of eggs produced by the rotifer per life cycle. Among all the temperature-female type combinations, all the juvenile periods of FMF, and the post-reproduction periods of UMF and FMF at 20℃, were the longest, and the number of eggs produced by an UMF at 30℃ was the highest. There were highly significant effects of both temperature and female type on the duration of the reproduction period, but no clear correlation was observed between temperature and female type. The reproduction period of AF was longer than that of UMF and FMF. Only temperature influenced significantly the mean life-span of the three types of females. The duration of juvenile, reproduction and post-reproduction periods as well as the life-span of the three types of females were all reduced very significantly with rise of temperature, but the rates of reduction varied with female type. Among the three types of females, the number of eggs produced per life cycle by an UMF was the highest, and that of a FMF was the lowest. A significant relationship between the number of eggs produced per life cycle and temperature was observed only in the UMF.

Biaxial tensile properties and elastic constants evaluation of envelope material for airship

This paper presents an experimental study to determine the tensile properties of the envelope fabric Uretek3216L under biaxial cyclic loading.First the biaxial cyclic tests were carefully carried out on the envelope material to obtain the stress-strain data and the corresponding nonlinearity and orthotropy of the material were analyzed. Then for some determination options with different stress ratios the least squares method minimizing the strain terms was used to calculate the elastic constants from the experimental data.Finally the influences of the determination options with different stress ratios and the reciprocal relationship on the elastic constants were discussed.Results show that the orthotropy of the envelope material can be attributed to the unbalanced crimp of their constitutive yarns in warp and weft directions and the elastic constants vary noticeably with the determination options as well as the normalized stress ratios.In real design practice it is more reasonable to use constants determined for specific stress states in particular stress ratios depending on the project＆#39;s needs.Also calculating the structures with two limitative sets of elastic constants instead of using only one set is recommendable in light of the great variety of the constant＆#39;s values.

Antecedents and performance consequences of governance structures in R&D alliances

Traditionally governance structures are classified into ＂hierarchy or market＂ or ＂equity or non-equity.＂ However,such classifications may not be effective in characterizing all governance structures of research and development（R D） alliances.Therefore,the first objective of this study is to investigate why there exist different organizational governance structures in managing R D alliances;the second objective of this study is to give strategic advice in choosing appropriate forms with respect to various characteristics of R D alliances.Through the theoretical lens that integrate both transaction cost economics（TCE） and the resource-based view（RBV）,a model that focuses on six major factors is developed for determining governance structure choices,namely,technological uncertainty,cultural difference,asset specificity,technology complementarity,appropriability of the individual firm＇s know-how,and trust.An R D alliance with higher technological uncertainty,larger cultural differences,and greater concerns for protecting an individual＇s know-how is more likely to adopt non-integrated alliances as the governing structure.An R D alliance with a higher degree of asset-specificity,greater technology complementarity and greater trust among partnering organizations is more likely to adopt integrated alliances as the governing structure;an R D alliance in the face of lower technological uncertainty will tend to adopt integrated alliances.The more aligned the choice of the governance structure with its determinants,the better the R D alliance will perform,and vice versa.

PAPR reduction in mobile WiMAX:A new ZCMT precoded random interleaved OFDMA system

Mobile WiMAX(worldwide interoperability for microwave access) air interface adopts orthogonal frequency division multiple access(OFDMA) as multiple access technique for its uplink(UL) and downlink(DL) to improve the multipath performance.All OFDMA based networks,like mobile WiMAX,experience the problem of high peak-to-average power ratio(PAPR).The high PAPR increases the complexity of analog-to-digital(A/D) and digital-to-analog(D/A) convertors,and also reduces the efficiency of RF high-power-amplifier(HPA).In this work,a new zadoff-chu matrix transform(ZCMT) precoding based random interleaved orthogonal frequency division multiple access(OFDMA) system was proposed for PAPR reduction in mobile WiMAX system.The system is based on precoding the constellation symbols with the ZCMT precoder before subcarrier mapping.The PAPR of proposed system is analyzed with the root-raised-cosine(RRC) pulse shaping to keep out of band radiation low and meet the transmission spectrum mask requirement.Simulation results show that the proposed system has better PAPR gain than the hadamard transform(WHT) precoded random interleaved OFDMA systems and the conventional random interleaved OFDMA systems.Symbol-error-rate(SER) performance of the system is also better than the conventional random interleaved OFDMA systems and the random interleaved OFDMA systems with WHT.The good improvement in PAPR significantly reduces the cost and the complexity of the transmitter.

Investigation on interaction and characteristics of traffic flows in urban elevated road-ramp-ground road system

The rapid development of the automobile industry and the relative lag of the road construction have constituted a prominent contradiction all over the world, particularly, in most of large cities. To cope with it, elevated roads have been built in many cities both at home and abroad. However, traffic jams frequently appear on elevated roads immediately after the completion of their construction. The awkward situation mainly results from the planning bug or the unsuitable control, apart from drastic increase in transportation demand. Elevated roads,

Urban One-way Traffic Organization and Its Evaluation

One-way traffic organization is a direct, efficient and economic method to solve traffic congestion and expand traffie capacity. With its evolution, advantages and disadvantages introduced its setting conditions demonstrated. The general method and processes are summarized in planning for urban one-way streets project, viz. investigation, drawing out and evaluation of project, selecting of project and beneficial analysis. Fuzzy synthetical evaluation other fields is employed to evaluate the project. Its evaluation system and method is introduced and Delphi method is adopted to obtain evaluation index. Finally, taking Harbin city as an example, the application process of above-mentioned method is illuminated. Accordingly, it is proved that the method is exercisable.

Selection of Maize Inbred Lines with High Regeneration and Susceptibility to Agrobacterium tumifacien

Ten-maize inbred lines of maize （Zea mays L.） with high-induction rate and proliferation ability of embryonic calli were selected from 70-maize inbred lines by immature embryo culturing. Some of the embryonic calli were transferred onto regeneration medium to examine the ability of regeneration, some were transformed via Agrobacterium tumifaciens C58 carrying intron-β-glucuronidase （gus） gene, and GV3301 carrying the green fluorescent protein （gfp） gene to study the susceptibility of different genotypes in maize to A. tumifaciens. All embryonic calli initiated from 10-maize inbred lines were able to regenerate into plantlets, and the regeneration frequencies of inbred lines 6010, 6038, 6015, 6051, and 6060 were 61.11%, 31.94%, 45%, 33.33%, and 56.94%, respectively, which were higher than that of other lines. Analysis of variance indicated that the susceptibility of the various genotypes in maize to A. tumifacien C58 showed a significant difference among each other, and the inbred lines 6010, 6015, 6051, 6050, 6058, 6060, 6069, 6077 were susceptible to A. tumifacien C58, of which frequency of gus expression were over 70%. Expression of GFP was observed in six-inbred lines （6050, 6015, 6051, 6058, 6069, 6077）. The inbred lines 6051, 6010, 6015, 6060, and 6050 had the high regeneration and the susceptibility to A. tumifaciens C58; and the inbred lines 6051, 6015, and 6060 had the high regeneration and the susceptibility to Agrobacterium tumifaciens GV3301.

Research on Flax Fiber Reinforced Polylactide Environmental Friendly Composite

Biodegradable polylactide acid （PLA） resin can be combined with flax fibers to produce biodegradable composite materials. In our study, commercial PLA fibers were mixed with flax fibers by a non-woven method so as to make non- woven pre-forms, which can be generated into flax fiber reinforced PLA environmental friendly composites by heat pressing technology. The tensile, flexural and impact properties are tested in order to evaluate the basic physical properties of the composites, and the influenced factors listed as making technology of the pre-forms, weight ratio of flax fibers and heat pressing technology are discussed and optimized, which can be described as weight ratio of flax fibers and PLA fibers is 50/50, heating temperature, time and pressure are respectively 195℃, 20 rain and 12.5 Mpa. Preliminary results show that mechanical properties of the flax/PLA composites are quite promising compared with flax/PP composites in coclrnon commercial automotive use. Scanning electron microscope （SEM） is used to analyze the tensile specimen fracture surfaces, which shows voids and gaps occurring between flax fibers and PLA matrix and sign of fiber pull.out, the strength of flax/PLA interface can be further improved.

Preparation and characterization of poly(D,L-lactide) and its porous biomaterials

Poly(D,L-lactide) was synthesized by indirect method from D,L-lactic acid and characterized by infrared spectrum and proton nuclear magnetic resonance. The influences of monomer purity, initiator concentration, polymerization temperature and polymerization time on the relative molecular mass of poly(D, L-lactide) were investigated. The polylactide was made into porous materials by using solvent-casting particulate-leaching method. Under the optimized conditions, polylactides with a viscosity average molecular mass up to 1.82×105 are obtained and the results are fairly reproducible. Scanning electron microscope observation indicates that the sample is highly porous and well-distributed with good interconnections between pores and the pore size of porous materials is in the range from 200 μm to 500 μm and it can be used as scaffold for bone tissue engineering.

Virtual brain surgery simulation system based on haptic interaction

To improve the accuracy and interactivity of soft tissue delormatlon simulation, a new plate spring model based on physics is proposed. The model is parameterized and thus can be adapted to simulate different organs. Different soft tissues are modeled by changing the width, number of pieces, thickness, and length of a single plate spring. In this paper, the structural design, calcula- tion of soft tissue deformation and real-time feedback operations of our system are also introduced. To evaluate the feasibility of the system and validate the model, an experimental system of haptic in- teraction, in which users can use virtual hands to pull virtual brain tissues, is built using PHANTOM OMNI devices. Experimental results show that the proposed system is stable, accurate and promising for modeling instantaneous soft tissue deformation.

Clinicopathologic significance of HER-2/neu protein expression and gene amplification in gastric carcinoma

AIM:To study the HER-2/neu protein expression and gene amplification in gastric carcinoma and their relation.METHODS:One hundred and forty-five formalin-fixed and paraffin-embedded tumor tissue samples from Chinese gastric carcinoma patients were studied with immunohistochemistry(IHC)and fluorescence in situ hybridization(FISH)methods.Clinicopathologic data about all patients were collected.RESULTS:The levels of HER-2 3+,HER-2 2+and HER21+were measurable in 6.9%,8.3%and 17.2%of the samples,respectively.No HER-2 was stained in 67.6% of the samples.FISH showed that HER-2 gene was amplified in 18 samples,10 HER-2 3+samples,5 HER-2 2+samples,and 3 HER-2 1+samples with IHC staining.HER-2 status was not correlated with the sex and age of patients,and tumor size,location or differentiation,but with the depth of invasion,TNM stage,lymph node and distant metastasis as well as histopathological classification of gastric cancer(P<0.05).CONCLUSION:All samples with IHC as HER-2 expression should be analyzed with FISH.Detection of HER-2 gene amplification can assess the malignant biological behaviors and prognosis of gastric cancer.

A proof of maximum contention-free property of interleavers for Turbo codes using permutation polynomials over integer rings

It is well known that interleavers play a critical role in Turbo coding/decoding schemes, and contention-free interleaver design has become a serious problem in the paraUelization of Turbo decoding, which is indispensable to meet the demands for high throughput and low latency in next generation mobile communication systems. This paper unveils the fact that interleavers based on permutation polynomials modulo N are contention-free for every window size W, a factor of the intedeaver length N, which, also called maximum contention-free interleavers.

Mapping Design of a Four-Dimensional 32-ary Signal Constellation over an AWGN Channel

In the bit-interleaved coded modulation with iterative decoding,it is desired that any two Hamming neighbors,i.e..signal constellation points whose binary labels are at unit Hamming distance,be separated by a large Euclidean distance.This paper determines the mappings for the 32-ary fourdimensional generalized cross constellation（32-4D-GCC） so that the minimum squared Euclidean distance d_（min）~2 between Hamming neighbors is maximized.Among such mappings,those with minimum multiplicity N（d_（min）~2） are selected.To reduce the large search space,a set of ＂mapping templates,＂ each producing a collection of mappings with the same set partitions of binary labels,is introduced.Via enumeration of mapping templates,it is shown that the optimum d_（min）~2=16and the optimum N（d_（min）~2）=16.Among thousands optimum mappings found by computer search,two of the best performance are presented.

Influence of different rolling routes on mechanical anisotropy and formability of commercially pure titanium sheet

Influence of three different rolling routes on mechanical anisotropy and formability of commercially pure titanium sheetwas investigated.Route A and Route B are unidirectional rolling(UR)where the rolling direction is along initial rolling direction(RD)and transverse direction(TD),respectively.Route C is cross rolling(CR)where the rolling direction is changed by90°aftereach rolling pass.The microstructure and texture,tensile mechanical properties including strength and elongation,and also theanisotropy of the UR and CR sheets were investigated at room temperature.The XRD results indicate that the texture intensity ofrolled samples gradually weakens from Route A to Route C.Compared with Route A and Route B rolled samples,the Route C rolledsamples show a smaller planar anisotropy.The deep drawing tests reveal that cross rolling can avoid the occurrence of earing.Erichsen tests indicate that rolling routes have an effect on stretch formability of pure titanium sheet.