发挥“介质”在阅读教学中的促进与推动作用

“介质”可以是教师着力创设的跟教材相匹配的情境,可以是一项具有驱动作用的学习任务,也可以是一个精心设计有统领或启发作用的问题,等等。运用“介质”的目的是为了调动情绪、勾连思维、引导交流、强化认知,促进学生的理解与感悟,有效达成“三维”教学目标。

Simultaneous Identification of Thermophysical Properties of Semitransparent Media Using a Hybrid Model Based on Artificial Neural Network and Evolutionary Algorithm

A hybrid identification model based on multilayer artificial neural networks(ANNs) and particle swarm optimization(PSO) algorithm is developed to improve the simultaneous identification efficiency of thermal conductivity and effective absorption coefficient of semitransparent materials.For the direct model,the spherical harmonic method and the finite volume method are used to solve the coupled conduction-radiation heat transfer problem in an absorbing,emitting,and non-scattering 2D axisymmetric gray medium in the background of laser flash method.For the identification part,firstly,the temperature field and the incident radiation field in different positions are chosen as observables.Then,a traditional identification model based on PSO algorithm is established.Finally,multilayer ANNs are built to fit and replace the direct model in the traditional identification model to speed up the identification process.The results show that compared with the traditional identification model,the time cost of the hybrid identification model is reduced by about 1 000 times.Besides,the hybrid identification model remains a high level of accuracy even with measurement errors.

我国民族文化对外传播活动模式初探

近年来国际间的文化交流传播活动日益频繁,形式日趋多样,内容不断丰富,沟通不断深入。但在文化融合、科技进步、新媒介涌现的背后,也正对我国民族文化的对外传播的内容与方式提出了新的挑战。在探讨了当今民族文化对外传播活动形式的基础上,我们强调了"介质"在传播过程中发挥的重要作用,并据此构建了民族文化对外传播活动的模式,以求从传播学的角度更直观地反映民族文化对外传播的过程与特征。

BISQ model based on a Kelvin-Voigt viscoelastic frame in a partially saturated porous medium

Taking into account three important porous media mechanisms during wave propagation （the Biot-flow, squirt-flow, and solid-skeleton viscoelastic mechanisms）, we introduce water saturation into the dynamic governing equations of wave propagation by analyzing the effective medium theory and then providing a viscoelastic Biot/squirt （BISQ） model which can analyze the wave propagation problems in a partially viscous pore fluid saturated porous media. In this model, the effects of pore fluid distribution patterns on the effective bulk modulus at different frequencies are considered. Then we derive the wave dynamic equations in the time-space domain. The phase velocity and the attenuation coefficient equations of the viscoelatic BISQ model in the frequency-wavenumber domain are deduced through a set of plane harmonic solution assumptions. Finally, by means of numerical simulations, we investigate the effects of water saturation, permeability, and frequency on compressional wave velocity and attenuation. Based on tight sandstone and carbonate experimental observed data, the compressional wave velocities of partially saturated reservoir rocks are calculated. The compressional wave velocity in carbonate reservoirs is more sensitive to gas saturation than in sandstone reservoirs.

Extraction of arsenic from arsenic-containing cobalt and nickel slag and preparation of arsenic-bearing compounds

The arsenic extraction from the arsenic-containing cobalt and nickel slag,which came from the purification process of zinc sulfate solution in a zinc smelting factory,was investigated.The alkaline leaching method was proposed according to the mode of occurrence of arsenic in the slag and its amphoteric characteristic.The leaching experiments were conducted in the alkaline aqueous medium,with bubbling of oxygen into the solution,and the optimal conditions for leaching arsenic were determined.The results showed that the extraction rate of arsenic was maximized at 99.10%under the optimal conditions of temperature 140 ℃,NaOH concentration 150 g/L,oxygen partial pressure 0.5 MPa,and a liquid-to-solid ratio 5：1.Based on the solubilities of As2O5,ZnO and PbO in NaOH solution at 25 ℃,a method for the separation of As in the form of sodium arsenate salt from the arsenic-rich leachate via cooling crystallization was established,and the reaction medium could be fully recycled.The crystallization rate was confirmed to reach 88.9%（calculated on the basis of Na3AsO4） upon a direct cooling of the hot leachate down to room temperature.On the basis of redox potentials,the sodium arsenate solution could be further reduced by sulfur dioxide（SO2） gas to arsenite,at a reduction yield of 92%under the suitable conditions.Arsenic trioxide with regular octahedron shape could be prepared successfully from the reduced solution,and further recycled to the purification process to purify the zinc sulfate solution.Also,sodium arsenite solution obtained after the reduction of arsenate could be directly used to purify the zinc sulfate solution.Therefore,the technical scheme of alkaline leaching with pressured oxygen,cooling crystallization,arsenate reduction by SO2 gas,and arsenic trioxide preparation,provides an attractive approach to realize the resource utilization of arsenic-containing cobalt and nickel slag.

Flexible-die forming process with solid granule medium on sheet metal

Certain non-metallic granules （NMG） were selected as the research object. It was proposed to conduct the volume compression experiments as well as those on the NMG physical properties at high stress levels. Then, not only the volume compression ratio curve but also the extended Drucker-Prager linear model were obtained. In addition, through the friction strength tests, parameters of the Mohr-Coulomb model were gained, which proved in basic agreement with those of the extended Drucker-Prager linear model. Additionally, curves of the friction coefficients between the NMG and the sheet metal trader different pressures were also obtained. Based on the material performance experiments, numerical analysis in respect of flexible-die forming process with solid granule medium （SGM） was conducted. The die and device for experiments of solid granule medium forming （SGMF） on sheet metal were designed and manufactured. Typical parabolic parts were successfully trial-produced. The tests and simulation results show that the sheet formability is significantly improved for the extraordinary friction performance during interaction between the SGM and the sheet metal surface. The process control and die structure are simple, and the shaped work-pieces enjoy many advantages, such as satisfactory surface quality and favorable die fitability, which offers a brand-new method and means for processing and preparation of sheet metals.

Recursive impedance inversion of ground-penetrating radar data in stochastic media

The travel time and amplitude of ground-penetrating radar （GPR） waves are closely related to medium parameters such as water content, porosity, and dielectric permittivity. However, conventional estimation methods, which are mostly based on wave velocity, are not suitable for real complex media because of limited resolution. Impedance inversion uses the reflection coefficient of radar waves to directly calculate GPR impedance and other parameters of subsurface media. We construct a 3D multiscale stochastic medium model and use the mixed Gaussian and exponential autocorrelation function to describe the distribution of parameters in real subsurface media. We introduce an elliptical Gaussian function to describe local random anomalies. The tapering function is also introduced to reduce calculation errors caused by the numerical simulation of discrete grids. We derive the impedance inversion workflow and test the calculation precision in complex media. Finally, we use impedance inversion to process GPR field data in a polluted site in Mongolia. The inversion results were constrained using borehole data and validated by resistivity data.

Fabrication of 1.55μm Si-Based Resonant Cavity Enhanced Photodetectors

A novel bonding method using silicate gel as bonding medium is developed.High reflective SiO 2/Si mirrors deposited on silicon substrates by e-beam deposition are bonded to the active layers at a low temperature of 350℃ without any special treatment on bonding surfaces.The reflectivities of the mirrors can be as high as 99 9%.A Si-based narrow band response InGaAs photodetector is successfully fabricated,with a quantum efficiency of 22 6% at the peak wavelength of 1 54μm,and a full width at half maximum of about 27nm.This method has a great potential for industry processes.

Physical and Mechanical Properties of Coral Sand in the Nansha Islands

Coral sand is a unique material developed in the tropical ocean environment, which is mainly composed of coral and other marine organism debris, with the CaCO3 content up to 96 %. It has special physical and mechanical properties due to its composition, structure and sedimentary environment. In this contribution, we discuss its specific gravity, porosity ratio compressibility, crushing, shearing and intensity for coral sand samples from the Nansha islands based on laboratory mechanical tests. Our results show distinct high porosity ratio, high friction angle and low intensity as compared with the quartz sand. We believe that grain crushing is the main factor that influences the deformation and strength of coral sand. Comprehensive study on the physical and mechanical properties of coral sands is significant in providing reliable scientific parameters to construction on coral islet, and thus avoids accidents in construction.

Reflection coefficients of P-SV waves in weak anisotropic media

We introduce the Thomsen anisotropic parameters into the approximate linear reflection coefficient equation for P-SV wave in weakly anisotropic HTI media. From this we get a new, more effective, and practical reflection coefficient equation. We performed forward modeling to AVO attributes, obtaining excellent results. The combined AVO attribute analysis of PP and PS reflection data can greatly reduce ambiguity, obtain better petrophysical parameters, and improve parameter accuracy.

Pore structure and liquid flow velocity distribution in water-saturated porous media probed by MRI

Magnetic resonance imaging （MRI） was used to probe the structure and flow velocity within the interparticle space of a packed bed of agar beads under water-saturated condition. The images of the velocity field at three different flow rates were obtained. To determine the pore-parameter of the porous media, the internal structure of the bed was also obtained using image processing technique. The results show that the porosity of the sample is 31.28% and the fitting curve for the distribution of pore equivalent diameter follows Gaussian distribution. The velocity profiles do shift as the flow rate varies and the solution flow through the void space is not a homogeneous flow in any pores. The velocity distributions within the pore are roughly parabolic with the local maximum being near the center. About half of the velocity components are in the class of 0-1 cm/s. The frequency of lower velocity components is lower at higher flow rate, but to higher velocity components, it is just the opposite.

Singularity-free Green's function for EM sources embedded in a stratified medium

We present a method to unify the calculation of Green＇s functions for an electromagnetic（EM） transmitting source embedded in a homogeneous stratified medium.A virtual interface parallel to layer interfaces is introduced through the source location.The potentials for Green＇s function are derived by decomposing the partial wave solutions to Helmholtz＇s equations into upward and downward within boundaries.The amplitudes of the potentials in each stratum are obtained recursively from the initial amplitudes at the source level.The initial amplitudes are derived by coupling with the transmitting sources and following the discontinuity of the tangential electric and magnetic fields at the source interface.Only the initial terms are related to the transmitting sources and thus need to be modified for different transmitters,whereas the kernel connected with the stratified media stays unchanged.Hence,the present method can be easily applied to EM transmitting sources with little modification.The application of the proposed method to the marine controlled-source electromagnetic method（MCSEM） demonstrates its simplicity and flexibility.

Linear numerical calculation method for obtaining critical point,pore fluid,and framework parameters of gas-bearing media

Up to now, the primary method for studying critical porosity and porous media are experimental measurements and data analysis. There are few references on how to numerically calculate porosity at the critical point, pore fluid-related parameters, or framework-related parameters. So in this article, we provide a method for calculating these elastic parameters and use this method to analyze gas-bearing samples. We first derive three linear equations for numerical calculations. They are the equation of density p versus porosity Ф, density times the square of compressional wave velocity p Vp^2 versus porosity, and density times the square of shear wave velocity pVs^2 versus porosity. Here porosity is viewed as an independent variable and the other parameters are dependent variables. We elaborate on the calculation steps and provide some notes. Then we use our method to analyze gas-bearing sandstone samples. In the calculations, density and P- and S-velocities are input data and we calculate eleven relative parameters for porous fluid, framework, and critical point. In the end, by comparing our results with experiment measurements, we prove the viability of the method.

Numerical modeling of seismic wavefields in transversely isotropic media with a compact staggered-grid finite difference scheme

To deal with the numerical dispersion problem, by combining the staggeredgrid technology with the compact finite difference scheme, we derive a compact staggered- grid finite difference scheme from the first-order velocity-stress wave equations for the transversely isotropic media. Comparing the principal truncation error terms of the compact staggered-grid finite difference scheme, the staggered-grid finite difference scheme, and the compact finite difference scheme, we analyze the approximation accuracy of these three schemes using Fourier analysis. Finally, seismic wave numerical simulation in transversely isotropic （VTI） media is performed using the three schemes. The results indicate that the compact staggered-grid finite difference scheme has the smallest truncation error, the highest accuracy, and the weakest numerical dispersion among the three schemes. In summary, the numerical modeling shows the validity of the compact staggered-grid finite difference scheme.

An analysis of seismic scattering attenuation in a random elastic medium

Seismic attenuation has been inherent media characteristics in which an interesting topic of research, for it reflects the seismic waves propagate. There are many factors that cause seismic wave attenuation, such as geometry attenuation caused by energy dissipating during propagation, friction attenuation by relative sliding among rock grains, and scattering attenuation by rock heterogeneity. In this paper we study P-wave scattering attenuation in a random elastic medium by numerical simulations from a statistical point of view. A random elastic medium model is built based on general stochastic process theory. Then a staggered-grid pseudo-spectral method is used to simulate wave propagation. Scattering attenuation is estimated by the spectral ratio method based on virtual detector records. Random elastic media numerical scatter results with various heterogeneity levels show that the higher heterogeneous levels cause greater scattering attenuation. When the scatter sizes are smaller than a wave length, the larger scatters give a greater attenuation. Finally, we propose a method to evaluate fluid-flow attenuation in porous media. The fluid- flow attenuation is derived from total attenuation and scattering attenuation in random porous media and the attenuation is estimated quantitatively. Results show that in the real seismic frequency range when the heterogeneous scale is about 10^1 meters （less than one wave length）, scattering attenuation is larger than fluid-tlow attenuation in random porous media and scattering attenuation is the main factor of seismic attenuation in real heterogeneous porous media.

Discrete element and finite element coupling simulation and experiment of hot granule medium pressure forming

The granule medium of discreteness is supposed to be continuous（Drucker-Prager model） in the existing finite element simulation analysis on the hot granule medium pressure forming（HGMF） process, so the granule medium may produce tensile stress in the process of pressure-transferring and flowing, which does not coincide with the reality. The analysis method, discrete element and finite element（DE-FE） coupling simulation, is proposed to solve the problem. The material parameters of simulation model are obtained by the pressure-transfer performance test of granule medium and the hot uniaxial tensile test of sheet metal. The DE-FE coupling simulation platform is established by adopting Visual Basic language. The features in the process that AA7075-T6 conical parts are formed by the HGMF process are analyzed and verified by the process test. The studies show that the results of DE-FE coupling simulation coincide well with the test results, which provides a new analysis method to solve the mechanics problem in the coupling of discrete and continuum.

Effects of Different Absorbing Medium on Microwave Remediation of Chlordane Contaminated Soil

Objective] This study almed to compare the effects of three absorbing medium on microwave degradation of chIordane in contaminated soiI under alkaline condition. [Method] SoiI sampIes were coI ected from the original site of a reIocated pesticide production enterprise as experimental materials, to investigate the effects of Cu2O, MnO2 and activated carbon powder as absorbing medium on soiI warming and removal rate of chIordane under alkaline condition with 20% moisture content. In addition, the effects of activated carbon as the optimal absorbing media on the removal rate of chIordane in contaminated soiI were analyzed, and the effects on the removal rate of chIordane in different weights of soiI sampIes were investigated. [Result] The effects of three different absorbing medium on the removal rates of chIordane demonstrated a descending order of activated carbon ＆gt; MnO2 ＆gt; CuO2. Under the same microwave condition, the removal rate of chIordane decreased with the increase of soiI weights, but the utiIization efficiency of microwave was improved continuousIy and tended to be stabiIized with the increase of soiI weights. [Conclu-sion] This study provided a theoretical basis for further Iarge-scale appIication in soiI remediation.

Flexible die drawing of magnesium alloy sheet by superimposing ultrasonic vibration

Combining solid granule medium forming technology with ultrasonic vibration plastic forming technology, ultrasonic vibration granule medium forming （UGMF） technology was proposed. To reveal the effect of ultrasonic vibration on flexible-die deep drawing, an ultrasonic vibration with a frequency of 20 kHz and a maximum output of 1.5 kW was on the solid granule medium deep drawing of AZ31B magnesium alloy sheet. The results revealed that ultrasonic vibration promotes the pressure transmission performance of the granule medium and the formability of the sheet. The forming load declines with the ultrasonic amplitude during the drawing process as a result of the combined influence of the ＂surface effect＂ and the ＂softening＂ of the ＂volume effect＂.

A model of continuum damage mechanics for high cycle fatigue of metallic materials

A non-linear continuum damage model was presented based on the irreversible thermodynamics framework developed by LEMAITRE and CHABOCHE. The proposed model was formulated by taking into account the influence of loading frequency on fatigue life. The parameters H and c are constants for frequency-independent materials, but functions of cyclic frequency for frequency-dependent materials. In addition, the expression of the model was discussed in detail at different stress ratios （R）. Fatigue test data of AlZnMgCu1.5 aluminium alloy and AMg6N alloy were used to verify the proposed model. The results showed that the model possesses a good ability of predicting fatigue life at different loading frequencies and stress ratios.

Seismic wave propagation in Kelvin visco-elastic VTI media

In this article,under the assumption of weak anisotropy and weak attenuation, we present approximate solutions of anisotropic complex velocities and quality-factors for Kelvin visco-elastic transverse isotropy（KEL-VTI） media,based on the complex physical parameter matrix.Also,combined with the KEL-VTI media model,the propagation characteristics of the qP-,qS V-,and qSH-wave phases and energies are discussed.Further, we build a typical KEL-VTI media model of the Huainan coal mine to model the wave propagation.The numerical simulation results show that the PP- and PSV-wave theoretical wave-fields are close to the wave-fields of three-component P- and converted-waves acquired in the work area.This result proves that the KEL-VTI media model gives a good approximation to this typical coalfield seismic-geologic conditions and is helpful to the study of attenuation compensation of multi-component seismic data.