谁是你的“初恋”情缘？佳能EOS 500D＆尼康D5000深入体验

无论能否天长地久，初恋总是令人刻骨铭心。初恋让人得以第一次体验到人 类最甜蜜的情感世界，也或许，能够白头偕老。

佳能星光宝贝大赛完美落幕

虽然只是0～12岁的小宝贝，可“明星”气质一点都不逊色。在刚刚结束的佳能星光宝贝大赛中，宝宝们的无限风采就被父母们用佳能DV诠释得淋漓尽致。

Solar Energy Resource Characteristics of Photovoltaic Power Station in Shandong Province

[Objective] The aim was to analyze characters of solar energy in photo- voltaic power stations in Shandong Province. [Method] The models of total solar radiation and scattered radiation were determined, and solar energy resources in pho-tovoltaic power stations were evaluated based on illumination in horizontal plane and cloud data in 123 counties or cities and observed information in Jinan, Fushan and Juxian in 1988-2008. [Result] Solar energy in northern regions in Shandong proved most abundant, which is suitable for photovoltaic power generation; the optimal angle of tilt of photovoltaic array was at 35°, decreasing by 2°-3° compared with local latitude. Total solar radiation received by the slope with optimal angle of tilt exceeded 1 600 kw.h/（m2.a）, increasing by 16% compared with horizontal planes. The maximal irradiance concluded by WRF in different regions tended to be volatile in 1 020-1 060 W/m2. [Conclusion] The research provides references for construction of photovoltaic power stations in Shandong Province.

LISP-PCHORD:An Enhanced Pointer-Based DHT to Support LISP

Aiming to efficiently support theLocator/Identifier Separation Protocol(LISP),in this paper,we present an enhanced pointerbased DHT mapping system:LISP-PCHORD.The system creates a pointer space to build ontop of standard DHTs.Mappings within thepointer space are(Endpoint Identifiers(EID),pointers) where the pointer is the address ofthe root node(the physical node that stores themappings) of the corresponding(EID,RoutingLocators(RLOCs)) mappings.In addition toenabling architectural qualities such as scalability and reliability,the proposed LISP-PCHORDcan copy with flat EIDs such as self-certifyingEIDs.The performance of the mapping systemplays a key role in LISP;however,DHT-basedapproaches for LISP seldom consider the mismatch problem that heavily damages the system performance in terms of lookup latency.In order to mitigate the mismatch problem andachieve optimal performance,we propose anoptimization design method that seeks an optimal matching relationship between P-nodes(nodes within the pointer space) and the physical nodes on the basis of the given lookuptraffic matrix.In order to find the optimal matching relationship,we provide two solutions:a linear programming method and a geneticalgorithm.Finally,we evaluate the performance of the proposed scheme and compare itwith that of LISP-DHT.

Preparation and properties of biodegradable bamboo powder/polycaprolactone composites

The bamboo powder/polycaprolactone composites （BPPC） were prepared by torque-rheometer to investigate the effects of recipes and processing conditions on the theological properties of BPPC. The morphological behavior and mechanical properties of BPPC were also studied. Results showed that the optimum recipe for composite materials is composed of 70% of polycaprolactone, 30% of bamboo powder according to volume, 1.6 % of aluminate coupling agent, 1.2% of stearic acid, and 2% of paraffin to bamboo powder according to mass ratio The optimum processing condition parameters were determined as the rotational speed at 50 r-min^-1 and the temperature at 100℃ for BPPC. The BPPC （containing 30 copies bamboo powder） possessed eminent interfacial compatibility and mechanical properties of BPPC.

Multiobjective extremal optimization with applications to engineering design

In this paper, we extend a novel unconstrained multiobjective optimization algorithm, so-called multiobjective extremal optimization （MOEO）, to solve the constrained multiobjective optimization problems （MOPs）. The proposed approach is validated by three constrained benchmark problems and successfully applied to handling three multiobjective engineering design problems reported in literature. Simulation results indicate that the proposed approach is highly competitive with three state-of-the-art multiobjective evolutionary algorithms, i.e., NSGA-11, SPEA2 and PAES. Thus MOEO can be considered a good alternative to solve constrained multiobjective optimization problems.

Seasonal variations in the energy budget of Elliot's pheasant (Syrmaticus ellioti) in cage

This study aimed to discuss the energy budget of Elliot's pheasant Syrmaticus ellioti in different seasons, with life and health, good growth and normal digestion of Elliot's pheasant as the tested objects, The energy budget of Elliot's pheasant was measured by daily collection of the trial pheasants' excrement in the biological garden of Guangxi Normal University from March 2011 to February 2012. The results showed that the gross energy consumption, metabolic energy and excrement energy varied by season, increasing as temperature decreased. There was significant difference in gross energy consumption, metabolic energy, excrement energy between adults and nonages. There was also a trend that food digestibility of pheasants increases as temperature increases. In the same season, the food digestibility of adults was better than that of nonages. Throughout spring, summer, autumn and winter, the metabolic energy of 4-year adults were 305.77±13.40 kJ/d, 263.67±11.89 kJ/d, 357.23±25.49 kJ/d and 403.12±24.91 kJ/d, respectively, and the nonages were 284.86±17.22 kJ/d, 284. 66±15.16 kJ/d, 402. 26±31.46 kJ/d and 420. 30±31.98 kJ/d, respectively. The minimum metabolic energies were 247.65±21.81 g, 265.86±26.53 g, respectively for each group, detected between 4-year adults and 1-year nonages. Further study is needed to determine whether 29.6 C is the optimal temperature for the Elliot's pheasant.

A new primal-dual path-following interior-point algorithm for linearly constrained convex optimization

In this paper, a primal-dual path-following interior-point algorithm for linearly constrained convex optimization(LCCO) is presented.The algorithm is based on a new technique for finding a class of search directions and the strategy of the central path.At each iteration, only full-Newton steps are used.Finally, the favorable polynomial complexity bound for the algorithm with the small-update method is deserved, namely, O(√n log n /ε).

Simulation and analysis of energy optimization for PEMFC hybrid system

The control objective and several key parameters of PEMFC hybrid system are analyzed. Control strategy design and energy optimization simulation are made individually for given cycle case and realtime operating case. For the given cycle case, genetic algorithm is adopted to solve the multi-constraint combinatorial optimization problem. Simulation result showed the algorithm＇s feasibility. As far as the realtime operation is concerned, based on the original fuzzy control strategy, the fuel cell voltage and voltage variance parameters are introduced to apply result reveals that the improved fuzzy control strategy can enhance the two-level modification on the fuzzy control output. The fuel cell efficiency and reduce the power fluctuations.

ACS algorithm-based adaptive fuzzy PID controller and its application to CIP-I intelligent leg

Based on the ant colony system （ACS） algorithm and fuzzy logic control, a new design method for optimal fuzzy PID controller was proposed. In this method, the ACS algorithm was used to optimize the input/output scaling factors of fuzzy PID controller to generate the optimal fuzzy control rules and optimal real-time control action on a given controlled object. The designed controller, called the Fuzzy-ACS PID controller, was used to control the CIP-Ⅰ intelligent leg. The simulation experiments demonstrate that this controller has good control performance. Compared with other three optimal PID controllers designed respectively by using the differential evolution algorithm, the real-coded genetic algorithm, and the simulated annealing, it was verified that the Fuzzy-ACS PID controller has better control performance. Furthermore, the simulation results also verify that the proposed ACS algorithm has quick convergence speed, small solution variation, good dynamic convergence behavior, and high computation efficiency in searching for the optimal input/output scaling factors.

CANON Process for Nitrogen Removal from Effluents of Municipal Sewage Treatment Plants

The feasibility and performance of nitrogen removal from municipal sewage were investigated through the completely autotrophic nitrogen removal over nitrite (CANON) process in a continuous reactor. CANON process was successfully started up with the transformation of nitrogen into gas by mass-balance analysis. For the synthetic waste-water (up to 480 mg NH4+-N/(L·d)), removal rates of the ammonia nitrogen and total nitrogen (TN) were about 80% and 55%, respectively, at 1.25 h hydraulic retention time (HRT). For the secondary effluent of municipal sewage, the effluent concentrations of NH4+-N and TN were below 5 mg/L and 9 mg/L, respectively. It is in accordance with the water quality standard for scenic environment with the reuse of urban recycling water (GB/T 18921-2002).

Optimal Design of Water Utilization Network with Energy Integration in Process Industries

Effective utilization of water and energy is the key factor of sustainable development in process industries, and also an important science and technology problem to be solved in systems engineering. In this paper,two new methods of optimal design of water utilization network with energy integration in process industries are presented, that is, stepwise and simultaneous optimization methods. They are suitable for both single contaminant and multi-contaminant systems, and the integration of energy can be carried out in the whole process system, not only limited in water network, so that energy can be utilized effectively. The two methods are illustrated by case study.

Representation of phase behavior of associating fluids using EOS

Associating fluids containing water and alkanols show a strong non-ideal behaviour on thermodynamic properties Simple cubic equations of state （EOS）. such as the Peng-Robinson （PR） equation, with conventional mixing rules are popular lbr its simplicity and eas3＇ implementation. However it is incapable of reliably representing the phase behaviour of associating mixtures. An effort has been made in this study to develop a new model in which the non-densit3＇-dependent mixing rules are applied to the PR EOS to represent the phase behaviour of associating fluids. The proposed model takes into account of the polarity in the attractive term of the EOS by including both the conventional random mixing term and the asymmetric interaction term. The proposed model has been successfully applied to the calculation of the vapor-liquid equilibrium （VLE） and liquid-liquid equilibrium （LLE） of fluids containing water, alkanols, acid gases, and hydrocarbons. A satisfactory agreement between the predictions of the proposed model and the experimental data in the literature is reached.

Waste heat water pumping model with direct contact cooling

The performance of a patented water pumping model with steam-air power was presented, which operates automatically by direct contact cooling method. The main objective was to study feasibility of a pumping model for underground water. In this model, a heater installed within the heat tank represented sources of waste heat as energy input for finding appropriate conditions of the 10 L pump model. The system operation had five stages： heating, pumping, vapor flow, cooling, and water suction. The overall water heads of 3, 4.5, 6 and 7.5 m were tested. At the same time, it was found that the pump with 50% air volume is sufficient for pumping water to a desired level. In the experiment, the temperatures in the heating and pumping stages were 100-103 ℃and 80-90 ℃, respectively. The pressure in the pumping stage was 12-18 kPa, and the pressure in the suction stage was about-80 kPa, sufficient for the best performance. It could pump 170 L of water at a 2 m suction head, 120 L at a 3.5 m suction head, 100 L at a 5 m suction head, and 65 L at a 6.5 m suction head in 2 h. A mathematical model for larger pumps was also presented, which operates nearly the same as the present system. Economic analysis of the 10 L pump was also included.

Research on the effect of the component proportion in the new water mist additive on firefighting performance

Water mist technology provides efficient firefighting performance while there is still room for improvement. So varieties of additives have been studied in recent years both at home and abroad. The self-made additives are used to compare the firefighting performance of diesel and heptane fire in open space. By adjusting the concentration of substance in the additives and conducting the experiment under the pressure of 0.3 MPa,0.5 MPa and 0.7 MPa,extinguish time and temperature are measured in the experiment. Through the experiments using different fuels,it can be found when the fuel is heptane that has a lower ignition point and a higher evaporation rate, the water mist additive can still significantly improve the firefighting performance. According to the data based on different concentrations of fluorinated surfactants,we find that fluorinated surfactants are the main substance to improve the performances by changing physical property of water mist. Optimal proportion of the additives for firefighting performance is found by experiment results.

数码单反乐与路

我叫Wood，这是我的故事 还记得小时候在爷爷家过年，身为报社记者的父亲总会担负起为一大家子照全家福的重任，而为了“演”好这个年三十的保留节目，父亲总会在除夕钟声敲响之前的一个钟头，开始鼓弄他的宝贝相机。

自由工作 自在生活

主角写真：吴恩，32岁。