浅论读者现代化

读者是图书馆赖以生存和发展的基础。读者现代化的研究是图书馆实现现代化的客观前提。本文对读者现代化研究的重要意义、内涵及图书馆员的“催化”作用进行探讨,以利于图书馆事业的发展。

Preparation of metal zinc from hemimorphite by vacuum carbothermic reduction with CaF_2 as catalyst

Zn reduction was investigated by the vacuum carbothermic reduction of hemimorphite with or without CaF2 as catalyst.Results indicate that CaF2 can catalyze the carbothermic reduction of zinc silicate,decrease the reaction temperature and time.The lower the reaction temperature and the more the amount of CaF2,the better the catalytic effect.The optimal process condition is obtained as follows：the addition of about 10% CaF2,the reaction temperature of 1373 K,the molar ratio of C to ZnTotal of 2.5,the pressure of system lower than 20 kPa,the reaction time of about 40 min.Under the optimal process condition,the zinc reduction rate is about 93% from hemimorphite.

Effect of sulfur impurity on coke reactivity and its mechanism

Effect of sulfur impurity on coke reactivity was investigated by simulating petroleum coke with low-impurity pitch coke and impurities doping. And its mechanism was discussed by X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy dispersive spectrometer (EDS). The results show that sulfur has strong catalysis on both air and CO2 reactivity of coke in the case of no other impurity interference. Its catalysis is probably realized by triggering organic sulfur→H2S→SO2→COS and elemental sulfur (Sx)→SO2 and organic sulfur→H2S→COS→Sx→C2S→COS reaction systems during coke?O2 and coke?CO2 reactions, respectively, which are partly circular with functions of increasing carbon consumption and enlarging coke specific surface area.

Recent advances in metal-free catalysts for the synthesis of cyclic carbonates from CO_2 and epoxides

The aim of ＂green chemistry＂ and ＂atom economy＂ is to utilize carbon dioxide and replace harmful reactants such as CO and phosgene for the production of cyclic carbonates. In this paper, metal-free catalysts including organic bases, ionic liquids, supported catalysts, organic copolymers and carbon materials for the synthesis of cyclic carbonates by the cycloaddition of carbon dioxide to epoxides are reviewed. Recent advances in the design of the catalysts and the understanding of the reaction mechanism are summarized and discussed. The synergistic effects of organic bases and hydrogen bond donors, organic bases and nucleophilic anions, hydrogen bond donors and nucleophilic anions and active components and supports are highlighted. The challenge is to develop metal-free catalysts suitable for carbon dioxide capture and fixation. The ultimate goal is to synthesize cyclic carbonates in a flow reactor directly using carbon dioxide from industrial flue gas at ambient temperature and atmospheric pressure. By using synergetic effects, a multi-functional approach can meet the design strategy of metal-free catalysts for carbon dioxide adsorption and activation as well as epoxide ring opening.

Effect of NH_4^+ exchange on CuY catalyst for oxidative carbonylation of methanol

NaY and ion exchanged NaNH4Y zeolite with NH4NO3 were used as the support to prepare CuY cata‐lysts by a high temperature anhydrous interaction between the support and copper （II） acety‐lacetonate Cu（acac）2. The catalysts were used for the oxidative carbonylation of methanol to dime‐thyl carbonate （DMC） at atmospheric pressure. The textural and acidic properties of NaNH4Y zeolite and the CuY catalysts were investigated by X‐ray diffraction, scanning electron microscopy, N2 ad‐sorption‐desorption, temperature programmed reduction of H2, X‐ray photoelectron spectroscopy and temperature programmed desorption of NH3. With increasing NH4NO3 concentration, the NH4＋exchange degree increased while the crystallinity of the zeolite remained intact. Crystalline CuO was formed when the NH4＋exchange degree of NaNH4Y was low, and the corresponding CuY catalyst showed low catalytic activity. With increasing of the NH4＋exchange degree of NaNH4Y, the content of surface bound Cu＋active centers increased and the catalytic activity of the corresponding CuY catalyst also increased. The surface bound Cu＋content reached its maximum when the NH4＋ex‐change degree of NaNH4Y reached towards saturation. The CuY exhibited optimal catalytic activity with 267.3 mg/（g·h） space time yield of DMC, 6.9%conversion of methanol, 68.5%selectivity of DMC.

Enhanced photochemical oxidation ability of carbon nitride by π-πstacking interactions with graphene

A one-pot method for the preparation of g-C3N4/reduced graphene oxide（rGO） composite photocatalysts with controllable band structures is presented.The photocatalysts are characterized by Fouirer transform infrared spectroscopy,X-ray diffraction,scanning electron microscope,transmission electron microscope,and Mott-Schottky analysis.The valance band（VB） of g-C3N4 exhibits a noticeable positive shift upon hybridizing with rGO,and thus results in a strong photo-oxidation ability.The g-C3N4/rGO composites show a higher photodegradation activity for 2,4-dichlorophenol（2,4-DCP） and rhodamine B（RhB） under visible light irradiation（λ≥420 ran）.The g-C3N4/rGO-1sample exhibits the highest photocatalytic activity,which is 1.49 and 1.52 times higher than that of bulk g-C3N4 for 2,4-DCP and 1.52 times degradation,respectively.The enhanced photocatalytic activity for g-C3N4 originates from the improved visible light usage,enhanced electronic conductivity and photo-oxidation ability by the formed strong π-π stacking interactions with rGO.

Promoting effects of Fe_2O_3 to Pt electrocatalysts toward methanol oxidation reaction in alkaline electrolyte

Fe_2O_3 nanorods and hexagonal nanoplates were synthesized and used as the promoters for Pt electrocatalysts toward the methanol oxidation reaction（MOR） in an alkaline electrolyte.The catalysts were characterized by scanning electron microscopy,transmission electron microscopy,X-ray diffraction,X-ray photoelectron spectroscopy,cyclic voltammetry and chronoamperometry.The results show that the presence of Fe_2O_3 in the electrocatalysts can promote the kinetic processes of MOR on Pt,and this promoting effect is related to the morphology of the Fe_2O_3 promoter.The catalyst with Fe_2O_3 nanorods as the promoter（Pt-Fe_2O_3/C-R） exhibits much higher catalytic activity and stability than that with Fe_2O_3 nanoplates as the promoter（Pt-Fe_2O_3/C-P）.The mass activity and specific activity of Pt in a Pt-Fe_2O_3/C-R catalyst are 5.32 A/mgpt and 162.7 A/m^2_（Pt）,respectively,which are approximately 1.67 and 2.04 times those of the Pt-Fe_2O_3/C-P catalyst,and 4.19 and 6.16 times those of a commercial PtRu/C catalyst,respectively.Synergistic effects between Fe_2O_3 and Pt and the high content of Pt oxides in the catalysts are responsible for the improvement.These findings contribute not only to our understanding of the MOR mechanism but also to the development of advanced electrocatalysts with high catalytic properties for direct methanol fuel cells.

Enhanced CO oxidation over potassium-promoted Pt/Al_2O_3 catalysts:Kinetic and infrared spectroscopic study

A series of K-promoted Pt/Al2O3 catalysts were tested for CO oxidation. It was found that the addition of K significantly enhanced the activity. A detailed kinetic study showed that the activation energies of the K-containing catalysts were lower than those of the K-free ones, particularly for catalysts with high Pt contents （51.6 k）/mol for 0.42K-2.0Pt/Al2O3 and 6：3.6 kJ/mol for 2.0Pt/Al2O3 ）. The CO reaction orders were higher for the K-containing catalysts （about -0.2） than for the K-free ones （about -0.5）, with the former having much lower equilibrium constants for CO adsorption than the latter. In situ Fourier-transform infrared spectroscopy showed that surface CO desorption from the 0.42K-2.0Pt/Al2O3 catalyst was easier than from 2.0Pt/Al2O3. The promoting effect of K was therefore caused by weakening of the interactions between CO and surface Pt atoms. This decreased coverage of the catalyst with CO and facilitated competitive O2 chemisorption on the Pt surface, and significantly lowered the reaction barrier between chemisorbed CO and O2 species.

Catalysis of Manganese(II) on Chromium(VI) Reduction by Citrate

The catalysis of manganese（Ⅱ） （Mn^2＋） on chromium（Ⅵ） （Cr^6＋） reduction by citrate was studied through batch experiments with the concentration of citrate greatly in excess of Cr^6＋ at 25 ℃ and in pH ranges of 4.0 go 5.0. Results showed that at pH 4.5 within 22 h direct reduction of Cr^6＋ by citrate was not observed, bug for the same time when Mn^2＋ （50 to 200 μmol L^-1） was added, nearly all Cr^6＋ was reduced, with the higher initial Mn^2＋ concentration having faster Cr^6＋ reduction. In the initial stage of the reaction, the Cr^6＋ reduction could be described with a pseudo-first-order kinetics equation. In the lager stage of the reaction, plots of lnc（Cr^6＋） versus t, where c（Cr^6＋） is the Cr^6＋ concentration in the reaction and t is the reaction time, deviated from the initial linear trend. The deviations suggested that the pseudo-first-order kinetics did not apply go the whole experimental period and that some reaction intermediates could have greatly accelerated Cr^6＋ reduction by citrate. The catalysis of the intermediates increased with the reaction time and gradually reached stability. Then, the plot of lnc（Cr^6＋） versus t in the presence of Mn^2＋ was linear again, with the rate constant increasing by 102 times compared with the absence of Mn^2＋. Complexation between Mn^2＋ and citrate was likely a prerequisite for the catalysis of Mn^2＋ on the reaction. Additional experiments showed that introducing eghylenediaminegegraacegic acid （EDTA） into the reaction system strongly suppressed the catalysis of Mn^2＋.

Preparation of Nitrogen-doped TiO2 Nanoparticle Catalyst and Its Catalytic Activity under Visible Light

N-doped TiO2 nanoparticle photocatalysts were prepared through a sol-gel procedure using NH4C1 as the nitrogen source and followed by calcination at certain temperature. Systematic studies for the preparation parameters and their impact on the structure and photocatalytic activity under ultraviolet （UV） and visible light irra-diation were carried out. Multiple techniques （XRD, TEM, DRIF, DSC, and XPS） were commanded to characterize the crystal structures and chemical binding of N-doped TiO2. Its photocatalytic activity was examined by the deg- radation of organic compounds. The catalytic activity of the prepared N-doped TiO2 nanoparticles under visible light （λ〉400nm） irradiation is evidenced by the decomposition of 4-chlorophenol, showing that nitrogen atoms in the N-doped TiO2 nanoparticle catalyst are responsible for the visible light catalytic activity. The N-doped TiO2 nanoparticle catalyst prepared with this modified route exhibits higher catalytic activity under UV irradiation in contrast to TiO2 without N-doping. It is suggested that the doped nitrogen here is located at the interstitial site of TiO2 lattice.

Catalysis of Dissolved and Adsorbed Iron in Soil Suspension for Chromium(VI) Reduction by Sulfide

The kinetics of Cr（Ⅵ） reduction by sulfide in soil suspensions with various pHs, soil compositions, and Fe（Ⅱ） concentrations was examined using batch anaeroblc experimental systems at constant temperature. The results showed that the reaction rate of Cr（Ⅵ） reduction was in the order of red soil 〈 yellow-brown soil 〈 chernozem and was proportional to the concentration of HCl-extractable iron in the soils. Dissolved and adsorbed iron in soil suspensions played an important role in accelerating Cr（Ⅵ） reduction. The reaction involved in the Cr（Ⅵ） reduction by Fe（Ⅱ） to produce Fe（ⅡI）, which was reduced to Fe（Ⅱ） again by sulfide, could represent the catalytic pathway until about 70% of the initially present Cr（Ⅵ） was reduced. The catalysis occurred because the one-step reduction of Cr（Ⅵ） by sulfide was slower than the two-step process consisting of rapid Cr（Ⅵ） reduction by Fe（Ⅱ） followed by Fe（Ⅲ） reduction by sulfide. In essence, Fe（Ⅱ）/Fe（Ⅲ） species shuttle electrons from sulfide to Cr（Ⅵ）, facilitating the reaction. The effect of iron, however, could be completely blocked by adding a strong Fe（Ⅱ）-complexing ligand, 1,10-phenanthroline, to the soil suspensions. In all the experiments, initial sulfide concentration was much higher than initial Cr（Ⅵ） concentration. The plots of In e[Cr（Ⅵ）] versus reaction time were linear up to approximately 70% of Cr（Ⅵ） reduction, suggesting a first-order reaction kinetics with respect to Cr（Ⅵ）. Elemental sulfur, the product of sulfide oxidation, was found to accelerate Cr（Ⅵ） reduction at a later stage of the reaction, resulting in deviation from linearity for the In c[Cr（Ⅵ）] versus time plots.

Fabrication of highly dispersed platinum-deposited porous g-C_3N_4 by a simple in situ photoreduction strategy and their excellent visible light photocatalytic activity toward aqueous 4-fluorophenol degradation

A series of highly dispersed platinum‐deposited porous g‐C3N4 (Pt/pg‐C3N4) were successfully fabricated by a simple in situ photoreduction strategy using chloroplatinic acid and porous g‐C3N4 as precursors. Porous g‐C3N4 was fabricated by a pretreatment strategy using melamine as a raw material.The morphology, porosity, phase, chemical structure, and optical and electronic properties ofas‐prepared Pt/pg‐C3N4 were characterized. The photocatalytic activity of as‐prepared Pt/pg‐C3N4was preliminarily evaluated by the degradation of aqueous azo dyes methyl orange under visible light irradiation. The as‐prepared Pt/pg‐C3N4 were further applied to the degradation and mineralization of aqueous 4‐fluorophenol. The recyclability of Pt/pg‐C3N4 was evaluated under four consecutive photocatalytic runs.

Investigation on the catalytic effects of AAEM during steam gasification and the resultant char reactivity in oxygen using Shengli lignite at different forms

The purpose of this study is to investigate the catalytic effects of alkali and alkaline earth metallic species （AAEM） on char conversion during the gasification in steam and the changes in ex-situ char reactivity in oxygen after the gasification in steam using different forms （i.e. H-form, Na-form） of Shengli brown coal. The surface area, AAEM concentration and carbon crystallite of chars were obtained to understand the change in char reactivity. It was found that not only Na concentration and carbon structure were the main factors governing the char reactivity in the atmosphere of steam and oxygen, but also they interacted each other. The presence of Na could facilitate the formation of disordering carbon structure in char, and the amorphous carbon structure would in turn affect the distribution of Na and thus its catalytic performance. The surface area and pore volume had very little relationship with the char＇s reactivity. Addi- tionally, the morphology of chars from different forms of coals were observed using scanning electron microscope （SEM）.

Simultaneous formation of a C/N-TiO_2 hollow photocatalyst with efficient photocatalytic performance and recyclability

Herein,we report a unique approach towards the preparation of C-modified and N-doped TiO2 hollow spheres(C/N-TiO2).TEM,SEM,and XPS analyses were used to confirm that the carbon and nitrogen co-decorated TiO2 photocatalyst was formed.Carbon-decoration improves the visible-light absorption and speeds up the separation of the photo-generated electron-hole pairs.C/N-TiO2 not only narrows the band gap of TiO2,but also exhibits excellent photocatalytic activity for the degradation of tetracycline and tetracycline hydrochloride.In addition,the C/N-TiO2 photocatalyst shows excellent recyclability for water decontamination,making it a promising candidate to purify aquatic contaminants.

A Kinetic Spectrophotometric Method for the Determination of Iron (Ⅲ) in Water Samples

A new kinetic spectrophotometric method has been developed for the determination of iron （Ⅲ）. The method is based on the catalytic effect of iron （Ⅲ） on the oxidation of weak acid brilliant blue dye （RAWL） by KIO4 in acid medium. The advantages of the proposed method are that it is sensitive, accurate, rapid, inexpensive, can be operated under room temperature and has a large determination concentration range compared to other techniques. The obtained optimum conditions are： pH 3.15, RAWL （200 mgL^-1） 5.00mL, Potassium periodate solution （0.01 molL^-1） 0.30mL, phenanthroline （0.02 molL^-1） 1.00mL, reaction temperature 25℃ and reaction time 7 min. With this method iron could quantitively be determined in the range 0.00-0.02 mgL^-1, the detection limit being 4.10 × 10^10gmL^-1. The relative standard deviations （RSD） in five replicate determinations for 3 μgL^-1and 5 μgL^-1 iron （Ⅲ） are 3.1% and 1.9%, respectively. The method has been applied to the determination of iron （Ⅲ） in tap water samples and seawater samples （from the South China Sea）, the recovery rates being 98.0% and 100.5%, respectively.

Preparation of SO_4^(2-)/TiO_2-MoO_3 Solid Superacid and Its Catalytic Activity in Acetalation and Ketalation

SO4^2-/TiO2-MoO3, a novel solid superacid, has been prepared and its catalytic activity at different synthetic conditions was examined with esterification of n-butanoic acid and n-butyl alcohol as probing reaction.The optimum conditions were also found, that is, the mass ratio of MoO3 used in the compound is 25%, the calcination temperature 450℃, and the soaked consistency of H2SO4 is 0.5mol.L^-1. Then it was applied in the catalytic synthesis of six similar important ketals and acetals as catalyst and revealed high catalytic activity. Under the condition that the molar ratio of aldehyde/ketone to glycol was 1:1.5, the mass ratio of the catalyst to the reactants was 0.5% and the reaction time 1.0 h, the yield of ketals and acetals reached up to 63.2%. The catalyst can be easily recovered and reused.

Promotion of activation ability of N vacancies to N2 molecules on sulfur-doped graphitic carbon nitride with outstanding photocatalytic nitrogen fixation ability

Nitrogen vacancies and sulfur co-doped g-C3N4 with outstanding N2 photofixation ability was synthesized via dielectric barrier discharge plasma treatment. X-ray diffraction, ultraviolet–visible spectroscopy, N2 adsorption, scanning electron microscopy, X-ray photoelectron spectroscopy, photoluminescence spectroscopy, and temperature-programmed desorption were used to characterize the as-prepared catalyst. The results showed that plasma treatment cannot change the morphology of the as-prepared catalyst but introduces nitrogen vacancies and sulfur into g-C3N4 lattice simultaneously. The as-prepared co-doped g-C3N4 displays an ammonium ion production rate as high as 6.2 mg·L^-1·h^-1·gcat^-1, which is 2.3 and 25.8 times higher than that of individual N-vacancy-doped g-C3N4 and neat g-C3N4, respectively, as well as showing good catalytic stability. Experimental and density functional theory calculation results indicate that, compared with individual N vacancy doping, the introduction of sulfur can promote the activation ability of N vacancies to N2 molecules, leading to promoted N2 photofixation performance.

Science Letters:Development of supported boron-doping TiO_2 catalysts by chemical vapor deposition

In this study, supported nonmetal (boron) doping TiO2 coating photocatalysts were prepared by chemical vapor deposition (CVD) to enhance the activity under visible light irradiation and avoid the recovering of TiO2. Boron atoms were successfully doped into the lattice of TiO2 through CVD, as evidenced from XPS analysis. B-doped TiO2 coating catalysts showed drastic and strong absorption in the visible light range with a red shift in the band gap transition. This novel B-TiO2 coating photocatalyst showed higher photocatalytic activity in methyl orange degradation under visible light irradiation than that of the pure TiO2 photocatalyst.

Complete removal of phenolic contaminants from bismuth-modified TiO2 single-crystal photocatalysts

Exploring low-cost and highly active photocatalysts is very urgent to accomplish complete removal of phenolic contaminants and overcome the limitations of the existing photocatalysts.In this study,we designed and synthesized noble metal-free TiO2 photocatalysts by introducing bismuth nanoparticles as modifiers of a TiO2 single crystal(Bi-SCTiO2).The Bi-SCTiO2 can make full use of the synergistic effect of a small band overlap and low charge carrier density(Bi)with a high conductivity(single crystal),significantly boosting the separation and migration of the photogenerated charge pairs.Therefore,the Bi-SCTiO2 photocatalyst exhibits a significantly enhanced degradation rate(12 times faster)of 4-nitrophenol than a TiO2 single crystal under simulated sunlight irradiation.Notably,the complete removal of phenolic contaminants is achieved in various water matrices,which not only successfully overcomes the incomplete degradation in many reported photocatalytic systems,but also manifests a significant practical potential for sewage disposal.Therefore,this work presents a new insight in designing and constructing noble metal-free decorated semiconductor single-crystal photocatalysts with excellent activity and cyclability.

Blanc Reaction of Aromatic Compounds Catalyzed by Ionic Liquids

Ionic liquids have been used as catalysts for Blanc reaction of toluene. The effects of reaction temperature, reaction time and dosage of the ionic liquid catalyst have been investigated, and the catalytic performance of different ionic liquid catalysts for toluene chloromethylation was also studied. The reaction was found to proceed under mild conditions with excellent conversion （up to 90%） in the absence of Lewis acids. The ionic liquids could be recycled and reused without loss of their catalytic activities.