大学语文非常道

老子说，“道生一．一生二，二生三，三生万物。”大学语文也是万物之一，也有非常道的一面，我们在阁读众多“可道”的研究论文之余，再读读何二元老师的这篇“非常道”，亦别有趣味，发人深省。

读清华简第八册《治邦之道》札记二则

清华简《治邦之道》中的"■路室",整理者认为"■"读为"谨"或"墐",解释为清扫干净或者涂。我们结合相关材料认为"■"当训为整饬、整治、治理。在明确"■"字训释基础上,我们对驹父盨铭文中的"堇夷俗"进行了重新释读。此外,结合上下文意及楚简已有读法来看,《治邦之道》中的"可士"应读为"奇士"。

Three-dimensional pseudo-dynamic reliability analysis of seismic shield tunnel faces combined with sparse polynomial chaos expansion

To address the seismic face stability challenges encountered in urban and subsea tunnel construction,an efficient probabilistic analysis framework for shield tunnel faces under seismic conditions is proposed.Based on the upper-bound theory of limit analysis,an improved three-dimensional discrete deterministic mechanism,accounting for the heterogeneous nature of soil media,is formulated to evaluate seismic face stability.The metamodel of failure probabilistic assessments for seismic tunnel faces is constructed by integrating the sparse polynomial chaos expansion method(SPCE)with the modified pseudo-dynamic approach(MPD).The improved deterministic model is validated by comparing with published literature and numerical simulations results,and the SPCE-MPD metamodel is examined with the traditional MCS method.Based on the SPCE-MPD metamodels,the seismic effects on face failure probability and reliability index are presented and the global sensitivity analysis(GSA)is involved to reflect the influence order of seismic action parameters.Finally,the proposed approach is tested to be effective by a engineering case of the Chengdu outer ring tunnel.The results show that higher uncertainty of seismic response on face stability should be noticed in areas with intense earthquakes and variation of seismic wave velocity has the most profound influence on tunnel face stability.

近代汉语中副词“可知(道)”的形成和演变

近代汉语中副词"可知(道)"有"当然""难怪""原来"三义。它始见于宋代,发展于元明,式微于清代。本文遵照"观察现象→提出假设→做出推论→验证推论→处理假设"的科学发现程序,就"当然"义"可知"的历史形成提出了三种观点,并验证其信度,最终发现:它既不是"可知道"的截略,也不是"可不知"的缩合,而是从"可以推知"义短语词汇化而来。"当然"义"可知道"也是从"可以推知"义短语词汇化而来。两者都经历了从"可以推知"义到"想必"义,再到"当然"义的演变。"难怪"义"可知(道)"则是从"可知道……(原因)了"义短语词汇化而来。"原来"义"可知(道)"由"难怪"义"可知(道)"演变而来,是后者移动到高频共现项"原来"所在空位的结果。

Driving Behavior Shaping Model in Road Traffic System

In order to give a new way for modeling driving behavior, identifying road traffic accident causation and solving a variety of road traffic safety problems such as driving errors prevention and driving behavior analysis, a new driving behavior shaping model is proposed, which could be used to assess the degree of effect of driving error upon road traffic safety. Driver behavior shaping model based on driving reliability and safety analysis could be used to identify the road traffic accident causation, to supply data for driver's behavior training, to evaluate driving procedures, to human factor design of road traffic system.

Optimal allocation model of signalized intersections with dynamic use of exit lanes for left turn

In order to improve the operational efficiency of heavy left-turn demand intersections,an optimal allocation model of an intersection with dynamic use of exit lanes for left turns(EFL)is proposed.The constraints of setting EFL are analyzed,including the number and length of reverse variable lanes,flow direction constraints,and signal constraints,etc.The constraints and control variables are combined in a unified framework for simultaneous optimization.The objective functions are defined as the average delay and left-turn capacity of an intersection.The model is solved by a non-dominated genetic algorithm(NSGA-Ⅱ).The results show that after the optimal allocation of EFL,the average vehicle delays of the intersection can be reduced by 14.9%and left-turn capacity can be increased by 19.3%.The effectiveness of the optimal allocation model of EFL is demonstrated.

Formation mechanisms of water inrush and mud burst in a migmatite tunnel：a case study in China

This paper presents a case study of water inrush and mud burst occurring in a migmatite tunnel to study its formation mechanisms. The geological investigation and mineralogical analysis showed that water inrush and mud burst in the migmatite was closely related to the component of the host rock. High content of soluble minerals,e.g.,calcite and dolomite,would make the migmatite rock prone to be fragmentized,isintegrated and eventually form different sorts of connected or semi-connected veins. The field exploration revealed most cavities in the magmatite tunnel were eroded by groundwater and formed large interconnected networks. The two faults and the dike in the magmatite tunnel became the preferred paths and provided great convenience for plenty of precipitation and mud slurry. Due to high water pressure and blast disturbance,the cavities can soon connect each other as well as all sorts of veins,forming a complex ground channel for water inrush and mud burst. To estimate the potential occurrenceof water inrush and mud burst,the water bursting coefficient was employed. The results showed the water bursting coefficient of the magmatite tunnel was much bigger than the threshold values and it can be used to explain the accident of water inrush and mud burst occurring in the magmatite tunnel.

Single channel blind source separation based on ICA feature extraction

A new technique is proposed to solve the blind source separation (BSS) given only a single channel observation. The basis functions and the density of the coefficients of source signals learned by ICA are used as the prior knowledge. Based on the learned prior information the learning rules of single channel BSS are presented by maximizing the joint log likelihood of the mixed sources to obtain source signals from single observation, in which the posterior density of the given measurements is maximized. The experimental results exhibit a successful separation performance for mixtures of speech and music signals.

XPD Lys751Gln polymorphism and esophageal cancer risk: A meta-analysis involving 2288 cases and 4096 controls

AIM: To evaluate the association between xeroderma pigmentosum group D (XPD), genetic polymorphism Lys751Gln and esophageal cancer risk. METHODS: We searched PubMed up to September 1, 2010 to identify eligible studies. A total of 10 casecontrol studies including 2288 cases and 4096 controls were included in the meta-analysis. Statistical analysis was performed with Review Manage version 4.2. Odds ratios (ORs) with 95% confidence intervals (CIs) were used to assess the strength of the association.RESULTS: The results suggested that there is no significant association between XPD Lys751Gln polymorphism and esophageal cancer susceptibility in the overall population. However, in subgroup analysis by histology type, a significant association was found between XPD Lys751Gln polymorphism and esophageal adenocarcinoma (for CC vs AA: OR = 1.25, 95% CI = 1.01-1.55, P = 0.05 for heterogeneity). CONCLUSION: Our meta-analysis suggested that XPD Lys751Gln polymorphism may be associated with increased risk of esophageal adenocarcinoma.

Research on Oil/Gas In-pipe Inspection Robot

A new type of in-pipe mobile robot was designed and developed on the basis of w heel in-pipe robot and crawler in-pipe robot. The three sets of driving wheels circumferentially 120° apart in the cross section, both front and rear driving wheels are distributed on the same parallelogram mechanis m. The driving motor drives the three sets of driving wheels by worm couple, the regulating motor makes the three sets of driving wheels push against the pipe inwall with stable and adequate pressing force by the ball screw pair and p ressure sensor, so the in-pipe robot can provide adequate and stable traction force. The robot mechanism is simple and sm all in size and work reliably . It is particularly suitable to the pipe with diameter 400～650 mm.

Development Pattern on the Way to the Construction of New Countryside—— A Study Based on the Construction of Ecological Civilization

On the way to the construction of new countryside, Henan province has been exploring its own new construction development pattern actively. This paper analyzes the four development patterns-Xingyang mode, Zhongmou mode,Xinmi mode and Gongyi mode --from the perspective of ecological civilization development on the basis of sufficient data and extensive research. This also concludes their experience to realize the sustainable development of the new construction of new countryside.

Tunnel face reliability analysis using active learning Kriging model——Case of a two-layer soils

This paper is devoted to the probabilistic stability analysis of a tunnel face excavated in a two-layer soil. The interface of the soil layers is assumed to be positioned above the tunnel roof. In the framework of limit analysis, a rotational failure mechanism is adopted to describe the face failure considering different shear strength parameters in the two layers. The surrogate Kriging model is introduced to replace the actual performance function to perform a Monte Carlo simulation. An active learning function is used to train the Kriging model which can ensure an efficient tunnel face failure probability prediction without loss of accuracy. The deterministic stability analysis is given to validate the proposed tunnel face failure model. Subsequently, the number of initial sampling points, the correlation coefficient, the distribution type and the coefficient of variability of random variables are discussed to show their influences on the failure probability. The proposed approach is an advisable alternative for the tunnel face stability assessment and can provide guidance for tunnel design.

Performance of MC-2D-CDMA over Frequency Selective Channel

The de spreading algorithm of MC 2D CDMA (Multi Carrier 2 Dimension Code Division Multiple Access) uses a simple correlator and complex spread spectrum sequences. Each chip of spreading spectrum sequence is in two sub carriers. With one sub carrier in deep fading, the chip in the other sub carrier would compensate to improve performance. Orthogonal restore correlation (ORC) explained the algorithm. The performance was examined analytically and by computer simulations. The performance is better than that of regular MC 2D CDMA model.

Study on the prediction of visible absorption maxima of azobenzene compounds

The geometries of azobenzene compounds are optimized with B3LYP/6-311G* method, and analyzed with nature bond orbital, then their visible absorption maxima are calculated with TD-DFT method and ZINDO/S method respectively. The results agree well with the observed values. It was found that for the calculation of visible absorption using ZINDO/S method could rapidly yield better results by adjusting OWFπ-π (the relationship between π-π overlap weighting factor) value than by the TD-DFT method. The method of regression showing the linear relationship between OWFπ-π and BLN-N (nitrogen-nitrogen bond lengths) as OWFπ-π=?8.1537+6.5638BLN-N, can be explained in terms of quantum theory, and also be used for prediction of visible absorption maxima of other azobenzne dyes in the same series. This study on molecules’ orbital geometry indicates that their visible ab- sorption maxima correspond to the electron transition from HOMO (the highest occupied molecular orbital) to LUMO (the lowest unoccupied molecular orbital).

A Survey of Hatchery Waste Management Practices

A survey of major chicken meat hatcheries in Australia was undertaken in 2008 to identify how hatchery waste is currently managed. A weekly average of 10.4 tonnes of waste is produced by chicken meat hatcheries. The cost of disposal （average $127/tonne） and availability of disposal sites is an emerging issue. The majority of hatchery waste is sent to land fill or for composting, with some rendered for use as pet food. Hatchery wastewater is mostly used for irrigation or disposed directly into the sewer. Most of the hatcheries have no environmental issues with hatchery waste on site but some report odour problems. Some hatcheries would like to treat the waste on site so that it could be sold as a commodity or to use methods to separate liquid from solid waste and recycle water.

Safe retaining pressures for pressurized tunnel face using nonlinear failure criterion and reliability theory

Based on the active failure mechanism and passive failure mechanism for a pressurized tunnel face, the analytical solutions of the minimum collapse pressure and maximum blowout pressure that could maintain the stability of pressurized tunnel faces were deduced using limit analysis in conjunction with nonlinear failure criterion under the condition of pore water pressure. Due to the objective existence of the parameter randomness of soil, the statistical properties of random variables were determined by the maximum entropy principle, and the Monte Carlo method was employed to calculate the failure probability of a pressurized tunnel. The results show that the randomness of soil parameters exerts great influence on the stability of a pressurized tunnel, which indicates that the research should be done on the topic of determination of statistical distribution for geotechnical parameters and the level of variability. For the failure probability of a pressurized tunnel under multiple failure modes, the corresponding safe retaining pressures and optimal range of safe retaining pressures are calculated by introducing allowable failure probability and minimum allowable failure probability. The results can provide practical use in the pressurized tunnel engineering.

Flow and Leakage Characteristics in Sealing Chamber of a Variable Geometry Hypersonic Inlet

When the variable geometry hypersonic inlet is sealed with ceramic wafers,the cavity flows inside the sealing chamber can be affected by the boundary layer near the side wall.To study the influence of the boundary layer thickness near the side wall on the flow and leakage characteristics in sealing chamber,the numerical calculation of the cavity flow in the sealing chamber under different inflow boundary layer thicknesses is carried out.The results show that three-dimensional cavity flow structures are close to being asymmetric,and the entrance pressure of the leakage path can also be affected by asymmetry;with the increase of the thickness of the boundary layer,the pressure at the cavity floor and the seal entrance decreases.Finally,the existing leakage prediction model is modified according to the distribution rule of the cavity floor and the flow properties in the leakage path.

Experiment investigation on visualization and operating characteristics of closed loop plate oscillating heat pipe with parallel channels

Using ethanol or acetone as the working fluid, visualization of oscillations in steady state was observed visually by high-speed cameras, and temperature oscillating and heat transfer characteristics of closed-loop plate oscillating heat pipe with parallel channels(POHP-PC) were experimentally investigated by varying liquid filled ratios(50%, 70%, 85%), section scales(1 mm×1 mm and 1 mm×1.5 mm), inclination angles, working fluids and heating inputs. It was found that during operating there was mixed flow consisting of plug flow and annular flow in channels of oscillating heat pipe at steady-state. There was an equilibrium position for working fluid of condenser during oscillating, and periodic oscillations occurred up and down in the vicinity of equilibrium position. With heat input increasing, equilibrium position rose slowly as a result of vapor pressure of evaporation.Evaporation temperature oscillating amplitude possessed a trend of small-large-small and frequency trend was of small-large during steady-state. It may be generally concluded that temperature, whether evaporator or condenser, fluctuated sharply or rose continuously when oscillating heat pipe coming to dry burning state. Simultaneously, it was found that temperature difference of cooling water possibly dropped with heat input rising during dry burning state. Thermal resistance of No. 2 with acetone was lower than that of No. 1 during experiments, but No. 2 achieving heat transfer limit was earlier than No. 1. However, with ethanol, thermal resistance of No. 1 and No. 2 were similar with the heating input less than 110-120 W and filling ratios of 50% and 70%. And with filling ratio of 85%, heating transfer performance of No. 2 was better compared to No. 1 during all the experiments.

Channel Allocation and Relay Selection Scheme in Relay-Based Networks

It has been demonstrated that either Channel Allocation （CA） or Relay Selection （RS） can improve the performance in relaying networks separately. However, there is little work concerning their combination in multi-cell uplink scenarios. In this paper, we investigate the issue which considers the CA and RS to optimize the system transmission rate in an uplink scenario, while maintaining the resource distribution fairness among users. This is first formulated as an optimization problem for a linear cellular system, where the same frequency channels can be reused in different cells. Based on the link and co-channel interference conditions, two low-complexity CA and RS schemes are then proposed with different decomposition se quences. Finally, numerical results are con ducted to verify the effectiveness of the pro posed CA and RS methods. Simulations re suits show that the proposed methods can yield significant improvements in system per formance in terms of average sum rate.