[ Objective] Study on the photosynthesis and influencing factors in super high-yield combination C Liangyou H255. [ Method] The photosynthetic characteristies were measured at a hot and muggy day under natural conditi...[ Objective] Study on the photosynthesis and influencing factors in super high-yield combination C Liangyou H255. [ Method] The photosynthetic characteristies were measured at a hot and muggy day under natural conditions. [ Result] A respective single peak at 11:30 was observed in diurnal variation curves of net photosynthetic rate (Pn) and transpiration rate(Tr). Correlation analysis shows that Pn presents an extremely significant correlation with photon flux densities (PFD) of photosynthetically active radiation, in comparison assumes a significant correlation either with stomatal conductance (Gs) or with ambient CO2 concentration (Ca). [ Conclusion] Gs followed by PFD presented most influence on Pn of super high-yield combination C Liangyou H255.展开更多
Seeds of two-line sterile rice cultivars Zhu 1S and Lu 18S were carried into space by "Shijian 8" breeding recoverable satellite, then planted in ground. Mutagenic effects from space induction were compared with tho...Seeds of two-line sterile rice cultivars Zhu 1S and Lu 18S were carried into space by "Shijian 8" breeding recoverable satellite, then planted in ground. Mutagenic effects from space induction were compared with those from y-irradiation and complex processing of space induction and y-irradiation. The results showed that agronomic effect was stimulated in Mo progenies of the two-line sterile rice varieties treated by space flight, and their radiosensitivities to the irradiation of space flight performed non-sensitive. The order of mutation frequency was determined to be SP + γ 〉 γ 〉 SP in M2 generation. And a series of mutated elites(individuals) were screened. Physiological indices of mutants screened like the activity of protective enzymes were measured to explore the physiological and biochemical basis of biological effect in space environment to two-line sterile rice. The results of this study show that space mutation breeding is an effective novel mean for breeding.展开更多
The oxidizing roasting process of carbon ferrochrome to prepare potassium chromate in the presence of potassium carbonate and air was investigated. The effects of reaction temperature, reaction time, mole ratio of pot...The oxidizing roasting process of carbon ferrochrome to prepare potassium chromate in the presence of potassium carbonate and air was investigated. The effects of reaction temperature, reaction time, mole ratio of potassium carbonate to carbon ferrochrome were studied, and thermodynamics and kinetics were also discussed. It was observed that the reaction temperature and reaction time had a significant influence on the roasting reaction of carbon ferrochrome. The reaction mechanism changed greatly as the temperature varied. A two-stage roasting process was favorable for the roasting reaction, and a chromium recovery rate of 97.06% was obtained through this two-stage roasting method. The chromium residue yielded from this method was only 1/3 of the product. Moreover, the component of Fe in the residue was as high as 55.04%. Therefore, it can be easily recovered to produce sponge iron, realizing complete detoxication and zero-emission of chromium residue.展开更多
The role of subtransus hot working on microstructure morphology of TA15 titanium alloy plate with elongatedαphases was studied by quantitative metallography on different sections. The results show that the microstruc...The role of subtransus hot working on microstructure morphology of TA15 titanium alloy plate with elongatedαphases was studied by quantitative metallography on different sections. The results show that the microstructure morphology is mainly affected by loading direction. When the sample is compressed along normal direction, microstructure on the section vertical to normal direction has equiaxed primaryαphase but microstructure on the section vertical to rolling direction has strip primaryαphase with long axis along tangential direction. When the sample is compressed along rolling direction, microstructure on the section vertical to normal direction has strip primaryαphase elongated along tangential direction but microstructure on the section vertical to rolling direction consists of strip and irregular broad-band primaryαphase. The strip primaryαphase aspect ratio is smaller at lower temperature due to the dynamic break-down ofαphase. The difference on primaryαphase aspect ratio between different sections decreases after compression along distinct directions in two loading passes, suggesting the improvement of equiaxity of primaryαphase.展开更多
Cu-4.7%Sn (mass fraction) alloy plate was prepared by the self-developed two-phase zone continuous casting (TZCC) process. The relationship between process parameters of TZCC and surface quality of the alloy plate...Cu-4.7%Sn (mass fraction) alloy plate was prepared by the self-developed two-phase zone continuous casting (TZCC) process. The relationship between process parameters of TZCC and surface quality of the alloy plate was investigated. The microstructure and mechanical properties of the TZCC alloy plate were analyzed. The results show that Cu-4.7%Sn alloy plate with smooth surface can be obtained by means of reasonable matching the entrance temperature of two-phase zone mold and the continuous casting speed. The microstructure of the TZCC alloy is composed of grains-covered grains, small grains with self-closed grain boundaries, columnar grains and equiaxed grains. Compared with cold mold continuous casting Cu-4.7%Sn alloy plate, the room temperature tensile strength and ductility of the TZCC alloy plate are greatly improved.展开更多
Amphoteric polyacrylamide was prepared first by the copolymerization of acrylamide with sodium acrylate and then through Mannich reaction.The copolymerization was carried out with a redox initiation system using the ...Amphoteric polyacrylamide was prepared first by the copolymerization of acrylamide with sodium acrylate and then through Mannich reaction.The copolymerization was carried out with a redox initiation system using the method of inverse emulsion polymerization.In this paper the reaction conditions and factors that affect emulsion stability were studied.Experiments show that a stable latex can be obtained under the following conditions:anionic degree is five percent,the ratio among acrylamide,formaldehyde and dimethylamine is 1∶1∶1.2,reaction temperature is 45 ℃,reaction time lasts four hours,and pH equals 5.0.The amphoteric copolymer has a higher molecular weight and cationic degree,so it is an ideal filler retention and drainage aid in paper making.展开更多
The chemical synthesis of Guanine arabinoside (ara-G) is extremely complex, time-consuming, and seriously polluted. A two-step enzymatic synthesis process was developed to acquire ara-G easily. 2,6-Diaminopurine ara...The chemical synthesis of Guanine arabinoside (ara-G) is extremely complex, time-consuming, and seriously polluted. A two-step enzymatic synthesis process was developed to acquire ara-G easily. 2,6-Diaminopurine arabinoside (ara-DA) was first synthesized with purine nucleoside phosphorylase and pyrimidine nucleoside phosphorylase produced by Enterobacter aerogenes DGW-07. The conversion yield of ara-DA could reach above 90% when the reaction liquid contained 30 mmol·L^-1 uracil arabinoside as arabinose donor, 10 mmol·L^- 1 2,6-diaminopurine as arabinose acceptor in pH 7.0 20 mmol·L^-1 phosphate buffer, and reacted at 60℃ for 48h. Then, ara-DA was effectively transformed into ara-G with adenylate deaminase produced by Aspergillus oryzae DAW-01. The total process had no complex separation and purification.展开更多
Dendrimer-like amphiphilic copolymer is a kind of three-dimensional spherical structure polymer. An amphiphilic dendrimer-like diblock copolymer, PEEGE-G2-b-PEO(OH)12, constituted of a hydrophobic poly(ethoxyethyl ...Dendrimer-like amphiphilic copolymer is a kind of three-dimensional spherical structure polymer. An amphiphilic dendrimer-like diblock copolymer, PEEGE-G2-b-PEO(OH)12, constituted of a hydrophobic poly(ethoxyethyl glycidol ether) inner core and a hydrophilic poly(ethylene oxide) outer layer, has been successfully synthesized by the living anionic ring-opening polymerization method. The intermediates and targeted products were charac-terized with 1H NMR spectroscopy and gel permeation chromatography. The application on drug delivery of dendrimer-like diblock copolymer PEEGE-G2-b-PEO(OH)12 using DOX as a model drug was also studied. The drug loading content and encapsulation e ciency were found at 13.07% and 45.75%, respectively. In vitro release experiment results indicated that the drug-loaded micelles exhibited a sustained release behavior under acidic media.展开更多
A novel process for catalytic oxidation of methane to synthesis gas (syngas), which consists of two consecutive fixed-bed reactors with air introduced into the reactors, integrated Fischer-Tropsch synthesis, was inves...A novel process for catalytic oxidation of methane to synthesis gas (syngas), which consists of two consecutive fixed-bed reactors with air introduced into the reactors, integrated Fischer-Tropsch synthesis, was investigated. At the same time, a catalytic combustion technology has been investigated for utilizing the F-T offgas to generate heat or power energy. The results show that the two-stage fixed reactor process keep away from explosion of CH4/O2. The integrated process is fitted to produce diesel oil and lubricating oil in remote gas field.展开更多
The effects of different time-independent and time-dependent couplings on two-atom entanglement are studied. The results show that the effects depend on the initial state. For the initial state |eeO〉, it is found th...The effects of different time-independent and time-dependent couplings on two-atom entanglement are studied. The results show that the effects depend on the initial state. For the initial state |eeO〉, it is found that different time-independent couplings make the case without entanglement exhibit entanglement, and time-dependent couplings turn the irregular entanglement regions into regular one. Under the case of decay, for the initial state |eg0〉, the different time-dependent couplings have disbenefit.展开更多
The mechanical properties of the Mg97ZnlY2 extruded alloy containing the long-period stacking ordered phase, the so-called LPSO-phase, with a volume fraction of 24%-25%, were examined by compression tests and cyclic t...The mechanical properties of the Mg97ZnlY2 extruded alloy containing the long-period stacking ordered phase, the so-called LPSO-phase, with a volume fraction of 24%-25%, were examined by compression tests and cyclic tension-compression deformation tests. The plastic behavior of the extruded alloys with compositions of Mg99.2Zn0.2Y0.6 and Mg89Zn4Y7 (molar fraction, %), which were almost the same compositions of Mg matrix phase and LPSO phase in Mg97Zn1Y2 Mg/LPSO two-phase alloy, respectively, were also prepared. By comparing their mechanical properties, the strengthening mechanisms operating in the Mg97Zn1 Y2 extruded alloy were discussed. Existence of the LPSO-phase strongly enhanced the refinement of Mg matrix grain size during extrusion, which led to a large increment of the strength of alloy. In addition, the LPSO-phases, which were aligned along the extrusion direction in Mg97Zn1Y2 extruded alloy, acted as hardening phases, just like reinforced fibers.展开更多
A new two-step synthetic method was successfully developed to simplify the recrystallization process of lithium difluoro(oxalate)borate(LiODFB).Meanwhile,the purity of LiODFB as-prepared was determined by NMR,ICP-AES ...A new two-step synthetic method was successfully developed to simplify the recrystallization process of lithium difluoro(oxalate)borate(LiODFB).Meanwhile,the purity of LiODFB as-prepared was determined by NMR,ICP-AES and Karl Fisher measurements,respectively.The as-prepared LiODFB presents a high purity up to 99.95%.Its metal ions and water contents are under good control as well.Besides,its structure information and thermal properties were confirmed by FTIR,Raman and DSC-TGA analyses,respectively.LiODFB exerts fine thermostability and hypo-water-sensitivity and its structure information agrees well with previous literature.Furthermore,a combination of phase diagram and Raman spectroscopy were utilized to study the thermal phase behavior and ions coordination of LiODFB-DMC binary system to optimize the synthesis and recrystallization process.Although there are three types of molecular interaction forms(CIPs,AGG-IIa,AGG-IIIb)in LiODFB-DMC binary system,LiODFB can only be isolated as large single crystal solvate as LiODFB·(DMC)3/2 by slowly cooling subjected to the nucleation kinetics.Therefore,the fundamental information of our work is helpful in accelerating the application of LiODFB in Li-ion secondary batteries.展开更多
Selective hydrogenation of chloronitrobenzene(CNB) to chloroaniline(CAN) catalyzed by water-soluble Ru/Pt bimetallic catalyst in an aqueous-organic biphasic system was studied. It was found that the catalytic activity...Selective hydrogenation of chloronitrobenzene(CNB) to chloroaniline(CAN) catalyzed by water-soluble Ru/Pt bimetallic catalyst in an aqueous-organic biphasic system was studied. It was found that the catalytic activity increased obviously due to the addition of platinum. Ru/Pt bimetallic catalysts exhibited a strong synergistic effect when the molar ratio of Pt was in the range of 5%—80%. Under the mild conditions including a temperature of 25 ℃, a hydrogen pressure of 1.0 MPa and a Pt molar ratio of 20%, the conversion of p-chloronitrobenzene(p-CNB) reached 99.9%, with the selectivity to p-chloroaniline(p-CAN) equating to 99.4%. The Ru/Pt catalyst also showed high activity and selectivity for the hydrogenation of other chloro- and dichloro-nitrobenzenes with different substituted positions. In addition, the catalyst can be recycled five times without significant loss of activity.展开更多
Ti-6Al-4V alloy powder was prepared through a two-step reduction of a mixture of TiO_(2),V_(2)O_(5) and Al_(2)O_(3) in this study.The oxide mixture was first reduced by Mg in MgCl_(2) at 750℃ in argon,where oxygen wa...Ti-6Al-4V alloy powder was prepared through a two-step reduction of a mixture of TiO_(2),V_(2)O_(5) and Al_(2)O_(3) in this study.The oxide mixture was first reduced by Mg in MgCl_(2) at 750℃ in argon,where oxygen was reduced to 2.47 wt%from 40.02 wt%.The oxygen content in the final powder was eventually reduced to an extremely low level(0.055 wt%)using calcium at 900℃ in argon,and the final powder had the composition of 90.12 wt%Ti,5.57 wt%Al,and 3.87 wt%V,which meets the standard specification of Ti-6Al-4V(ASTM F1108-09).Between the two reductions,a heat treatment step was designed to help controlling the specific surface area and particle size.The effect of the heat treatment temperature on the morphology,and composition uniformity of the powder was investigated in detail.Heat treatment above 1300℃ attributed to a dense powder with a controlled specific surface area.Thermodynamic modeling and experimental results indicated that onlyα-Ti enriched with Al andβ-Ti enriched with V exist in the final powder,and other possible phases including Al-Mg and Al-V were excluded.This study also offers a triple-step thermochemical process for producing high-purity Ti-based alloy powder.展开更多
Quantitative representation of complicated behavior of fluid mixtures in the critical region by any of equation-of-state theories re-mains as a difficult thermodynamic topics to date. In the present work, a computatio...Quantitative representation of complicated behavior of fluid mixtures in the critical region by any of equation-of-state theories re-mains as a difficult thermodynamic topics to date. In the present work, a computational efforts were made for representing various types of critical loci of binary water with hydrocarbon systems showing Type II and Type III phase behavior by an elementary equation of state [called multi-fluid nonrandom lattice fluid EOS (MF-NLF EOS)] based on the lattice statistical mechanical theory. The model EOS requires two mo-lecular parameters which representing molecular size and interaction energy for a pure component and single adjustable interaction energy pa-rameter for binary mixtures. Critical temperature and pressure data were used to obtain molecular size parameter and vapor pressure data were used to obtain interaction energy parameter. The MF-NLF EOS model adapted in the present study correlated quantitatively well the critical loci of various binary water with hydrocarbon systems.展开更多
The spindle behavior and MPF activity changes in the progression of oocyte maturation were investigated and compared with cytological observation and kinase assay between gynogenetic silver crucian carp and amphimicti...The spindle behavior and MPF activity changes in the progression of oocyte maturation were investigated and compared with cytological observation and kinase assay between gynogenetic silver crucian carp and amphimictic colored crucian carp. MPF activity was measured by using histone H1 as phosphorylation substrate. There were two similar oscillatory MPF kinase activity changes during oocyte maturation in two kinds of fishes with different reproductive modes, but there existed some subtle difference between them. The subtle difference was that the first peak of MPF kinase activity was kept to a longerlasting time in the gynogenetic silver crucian carp than in the amphimictic colored crucian carp. It was suggested that the difference may be related to the spindle behavior changes, such as tripolar spindle formation and spindle rearrangement in the gynogenetic crucian carp.展开更多
The knowledge of flow regime is very important for quantifying the pressure drop, the stability and safety of two-phase flow systems. Based on image multi-feature fusion and support vector machine, a new method to ide...The knowledge of flow regime is very important for quantifying the pressure drop, the stability and safety of two-phase flow systems. Based on image multi-feature fusion and support vector machine, a new method to identify flow regime in two-phase flow was presented. Firstly, gas-liquid two-phase flow images including bub- bly flow, plug flow, slug flow, stratified flow, wavy flow, annular flow and mist flow were captured by digital high speed video systems in the horizontal tube. The image moment invariants and gray level co-occurrence matrix texture features were extracted using image processing techniques. To improve the performance of a multiple classifier system, the rough sets theory was used for reducing the inessential factors. Furthermore, the support vector machine was trained by using these eigenvectors to reduce the dimension as flow regime samples, and the flow regime intelligent identification was realized. The test results showed that image features which were reduced with the rough sets theory could excellently reflect the difference between seven typical flow regimes, and successful training the support vector machine could quickly and accurately identify seven typical flow regimes of gas-liquid two-phase flow in the horizontal tube. Image multi-feature fusion method provided a new way to identify the gas-liquid two-phase flow, and achieved higher identification ability than that of single characteristic. The overall identification accuracy was 100%, and an estimate of the image processing time was 8 ms for online flow regime identification.展开更多
The mathematical and simulation models of working head in the deep-sea working environment were built to analyze the effects of cutter-suction flow,cutter-head rotating speed,cutting depth and suction port position on...The mathematical and simulation models of working head in the deep-sea working environment were built to analyze the effects of cutter-suction flow,cutter-head rotating speed,cutting depth and suction port position on the cutter-suction capacity.The efficiency of the cutter-suction is analyzed based on the analysis of the variation law of the solid-phase volume fraction of the flow field,the variation law of the velocity distribution in the flow field and the distribution law of the solid-phase concentration.The results show that the increase of cutter-suction flow can significantly improve the cutter-suction efficiency when it is less than1000m3/h.However,when it is more than1000m3/h,it is helpless.When the cutter-head rotate speed is within the range of10–25r/min,the cutter-suction efficiency stabilizes at about95%.While the speed is greater than25r/min,the cutter-suction efficiency decreases sharply with the increase of cutter-head rotate speed.With the increase of cutting depth,the cutter-suction efficiency first increases and then remains stable and finally decreases.The cutter-suction efficiency remains at about94%when the suction port position deviation ranges from0°to30°,but it has a sharply reduction when the deviation angle is more than30°.展开更多
The stretching and folding of fluid element during chaotic mixing field is studied using numerical method. The chaotic mixing process is caused by periodic secondary flow in a twisted curved pipe. Using the nonlinea...The stretching and folding of fluid element during chaotic mixing field is studied using numerical method. The chaotic mixing process is caused by periodic secondary flow in a twisted curved pipe. Using the nonlinear discrete velocity field as the dynamical system, the present study connects the fluid particle's stretching along its trajectory in one period to a linearized time-varying variational equation. After numerical approximation of the variational equation, fluid stretching is calculated on the whole cross section. The stretching distribution shows an exponential fluid stretching and folding, which indicates an excellent mixing performance.展开更多
文摘[ Objective] Study on the photosynthesis and influencing factors in super high-yield combination C Liangyou H255. [ Method] The photosynthetic characteristies were measured at a hot and muggy day under natural conditions. [ Result] A respective single peak at 11:30 was observed in diurnal variation curves of net photosynthetic rate (Pn) and transpiration rate(Tr). Correlation analysis shows that Pn presents an extremely significant correlation with photon flux densities (PFD) of photosynthetically active radiation, in comparison assumes a significant correlation either with stomatal conductance (Gs) or with ambient CO2 concentration (Ca). [ Conclusion] Gs followed by PFD presented most influence on Pn of super high-yield combination C Liangyou H255.
基金Supported by The Ministry of National Agricultural Special PublicSector Research "Nuclear Technology Application in Agriculture"(No.200803034)Science and Technology Innovation Projects ofHunan Academy of Agricultural Sciences(2009hnnkycx13)the National Science&Technology Pillar Program in the Eleventh Five-year Plan period(2008BAD7B02)~~
文摘Seeds of two-line sterile rice cultivars Zhu 1S and Lu 18S were carried into space by "Shijian 8" breeding recoverable satellite, then planted in ground. Mutagenic effects from space induction were compared with those from y-irradiation and complex processing of space induction and y-irradiation. The results showed that agronomic effect was stimulated in Mo progenies of the two-line sterile rice varieties treated by space flight, and their radiosensitivities to the irradiation of space flight performed non-sensitive. The order of mutation frequency was determined to be SP + γ 〉 γ 〉 SP in M2 generation. And a series of mutated elites(individuals) were screened. Physiological indices of mutants screened like the activity of protective enzymes were measured to explore the physiological and biochemical basis of biological effect in space environment to two-line sterile rice. The results of this study show that space mutation breeding is an effective novel mean for breeding.
基金Project(2009GK2003)supported by the Natural Science Foundation of Hunan Province,China
文摘The oxidizing roasting process of carbon ferrochrome to prepare potassium chromate in the presence of potassium carbonate and air was investigated. The effects of reaction temperature, reaction time, mole ratio of potassium carbonate to carbon ferrochrome were studied, and thermodynamics and kinetics were also discussed. It was observed that the reaction temperature and reaction time had a significant influence on the roasting reaction of carbon ferrochrome. The reaction mechanism changed greatly as the temperature varied. A two-stage roasting process was favorable for the roasting reaction, and a chromium recovery rate of 97.06% was obtained through this two-stage roasting method. The chromium residue yielded from this method was only 1/3 of the product. Moreover, the component of Fe in the residue was as high as 55.04%. Therefore, it can be easily recovered to produce sponge iron, realizing complete detoxication and zero-emission of chromium residue.
基金Projects (50935007,51205317) supported by the National Natural Science Foundation of ChinaProject (2010CB731701) supported by the National Basic Research Program of ChinaProject (B08040) supported by Research Fund of the 111 Project
文摘The role of subtransus hot working on microstructure morphology of TA15 titanium alloy plate with elongatedαphases was studied by quantitative metallography on different sections. The results show that the microstructure morphology is mainly affected by loading direction. When the sample is compressed along normal direction, microstructure on the section vertical to normal direction has equiaxed primaryαphase but microstructure on the section vertical to rolling direction has strip primaryαphase with long axis along tangential direction. When the sample is compressed along rolling direction, microstructure on the section vertical to normal direction has strip primaryαphase elongated along tangential direction but microstructure on the section vertical to rolling direction consists of strip and irregular broad-band primaryαphase. The strip primaryαphase aspect ratio is smaller at lower temperature due to the dynamic break-down ofαphase. The difference on primaryαphase aspect ratio between different sections decreases after compression along distinct directions in two loading passes, suggesting the improvement of equiaxity of primaryαphase.
基金Project(51374025) supported by the National Natural Science Foundation of ChinaProject(2014Z-05) supported by the State Key Laboratory for Advanced Metals and Materials,University of Science and Technology Beijing,ChinaProject(2152020) supported by the Beijing Natural Science Foundation,China
文摘Cu-4.7%Sn (mass fraction) alloy plate was prepared by the self-developed two-phase zone continuous casting (TZCC) process. The relationship between process parameters of TZCC and surface quality of the alloy plate was investigated. The microstructure and mechanical properties of the TZCC alloy plate were analyzed. The results show that Cu-4.7%Sn alloy plate with smooth surface can be obtained by means of reasonable matching the entrance temperature of two-phase zone mold and the continuous casting speed. The microstructure of the TZCC alloy is composed of grains-covered grains, small grains with self-closed grain boundaries, columnar grains and equiaxed grains. Compared with cold mold continuous casting Cu-4.7%Sn alloy plate, the room temperature tensile strength and ductility of the TZCC alloy plate are greatly improved.
文摘Amphoteric polyacrylamide was prepared first by the copolymerization of acrylamide with sodium acrylate and then through Mannich reaction.The copolymerization was carried out with a redox initiation system using the method of inverse emulsion polymerization.In this paper the reaction conditions and factors that affect emulsion stability were studied.Experiments show that a stable latex can be obtained under the following conditions:anionic degree is five percent,the ratio among acrylamide,formaldehyde and dimethylamine is 1∶1∶1.2,reaction temperature is 45 ℃,reaction time lasts four hours,and pH equals 5.0.The amphoteric copolymer has a higher molecular weight and cationic degree,so it is an ideal filler retention and drainage aid in paper making.
基金Supported by the Innovation Fund for Technology Based Firms from Ministry of Science and Technology of China(07C26213101283)
文摘The chemical synthesis of Guanine arabinoside (ara-G) is extremely complex, time-consuming, and seriously polluted. A two-step enzymatic synthesis process was developed to acquire ara-G easily. 2,6-Diaminopurine arabinoside (ara-DA) was first synthesized with purine nucleoside phosphorylase and pyrimidine nucleoside phosphorylase produced by Enterobacter aerogenes DGW-07. The conversion yield of ara-DA could reach above 90% when the reaction liquid contained 30 mmol·L^-1 uracil arabinoside as arabinose donor, 10 mmol·L^- 1 2,6-diaminopurine as arabinose acceptor in pH 7.0 20 mmol·L^-1 phosphate buffer, and reacted at 60℃ for 48h. Then, ara-DA was effectively transformed into ara-G with adenylate deaminase produced by Aspergillus oryzae DAW-01. The total process had no complex separation and purification.
文摘Dendrimer-like amphiphilic copolymer is a kind of three-dimensional spherical structure polymer. An amphiphilic dendrimer-like diblock copolymer, PEEGE-G2-b-PEO(OH)12, constituted of a hydrophobic poly(ethoxyethyl glycidol ether) inner core and a hydrophilic poly(ethylene oxide) outer layer, has been successfully synthesized by the living anionic ring-opening polymerization method. The intermediates and targeted products were charac-terized with 1H NMR spectroscopy and gel permeation chromatography. The application on drug delivery of dendrimer-like diblock copolymer PEEGE-G2-b-PEO(OH)12 using DOX as a model drug was also studied. The drug loading content and encapsulation e ciency were found at 13.07% and 45.75%, respectively. In vitro release experiment results indicated that the drug-loaded micelles exhibited a sustained release behavior under acidic media.
基金Supported by the Major State Basic Research Projects of the Ministry of Science and Technology of China (G1999022402).
文摘A novel process for catalytic oxidation of methane to synthesis gas (syngas), which consists of two consecutive fixed-bed reactors with air introduced into the reactors, integrated Fischer-Tropsch synthesis, was investigated. At the same time, a catalytic combustion technology has been investigated for utilizing the F-T offgas to generate heat or power energy. The results show that the two-stage fixed reactor process keep away from explosion of CH4/O2. The integrated process is fitted to produce diesel oil and lubricating oil in remote gas field.
基金The project supported by National Natural Science Foundation of China under Grant Nos. 10347103 and 10305002 and the Natural Science Foundation of Liaoning Province under Grant No. 20031073
文摘The effects of different time-independent and time-dependent couplings on two-atom entanglement are studied. The results show that the effects depend on the initial state. For the initial state |eeO〉, it is found that different time-independent couplings make the case without entanglement exhibit entanglement, and time-dependent couplings turn the irregular entanglement regions into regular one. Under the case of decay, for the initial state |eg0〉, the different time-dependent couplings have disbenefit.
基金supported by the project"Development of Key Technology for Next-generation Heat-resistant Magnesium Alloys,Kumamoto Prefecture Collaboration of Regional Entities for the Advancement of Technological Excellence"from Japan Science and Technology Agencyby funds from the"Priority Assistance of the Formation of Worldwide Renowned Centers of Research-The 21st Century COE Program and Global COE Program(Project:Center of Excellence for Advanced Structural and Functional Materials Design)"a Grant-in-Aid for Scientific Research and Development from the Ministry of Education,Culture,Sports,Science and Technology of Japan
文摘The mechanical properties of the Mg97ZnlY2 extruded alloy containing the long-period stacking ordered phase, the so-called LPSO-phase, with a volume fraction of 24%-25%, were examined by compression tests and cyclic tension-compression deformation tests. The plastic behavior of the extruded alloys with compositions of Mg99.2Zn0.2Y0.6 and Mg89Zn4Y7 (molar fraction, %), which were almost the same compositions of Mg matrix phase and LPSO phase in Mg97Zn1Y2 Mg/LPSO two-phase alloy, respectively, were also prepared. By comparing their mechanical properties, the strengthening mechanisms operating in the Mg97Zn1 Y2 extruded alloy were discussed. Existence of the LPSO-phase strongly enhanced the refinement of Mg matrix grain size during extrusion, which led to a large increment of the strength of alloy. In addition, the LPSO-phases, which were aligned along the extrusion direction in Mg97Zn1Y2 extruded alloy, acted as hardening phases, just like reinforced fibers.
基金Project(51371198)supported by the National Natural Science Foundation of ChinaProject(K1202039-11)supported by the Science and Technology Project of Changsha,China
文摘A new two-step synthetic method was successfully developed to simplify the recrystallization process of lithium difluoro(oxalate)borate(LiODFB).Meanwhile,the purity of LiODFB as-prepared was determined by NMR,ICP-AES and Karl Fisher measurements,respectively.The as-prepared LiODFB presents a high purity up to 99.95%.Its metal ions and water contents are under good control as well.Besides,its structure information and thermal properties were confirmed by FTIR,Raman and DSC-TGA analyses,respectively.LiODFB exerts fine thermostability and hypo-water-sensitivity and its structure information agrees well with previous literature.Furthermore,a combination of phase diagram and Raman spectroscopy were utilized to study the thermal phase behavior and ions coordination of LiODFB-DMC binary system to optimize the synthesis and recrystallization process.Although there are three types of molecular interaction forms(CIPs,AGG-IIa,AGG-IIIb)in LiODFB-DMC binary system,LiODFB can only be isolated as large single crystal solvate as LiODFB·(DMC)3/2 by slowly cooling subjected to the nucleation kinetics.Therefore,the fundamental information of our work is helpful in accelerating the application of LiODFB in Li-ion secondary batteries.
基金the financial supports of the Natural Science Foundation of China(No.21303139)the Open Project of Chemical Synthesis and Pollution Control Key Laboratory of Sichuan Province(No.CSPC2013-1)+1 种基金the Key Fund Project of Educational Department of Sichuan Province(No.14ZA0126)the Doctoral Initiating Fund of China West Normal University(No.10B010)
文摘Selective hydrogenation of chloronitrobenzene(CNB) to chloroaniline(CAN) catalyzed by water-soluble Ru/Pt bimetallic catalyst in an aqueous-organic biphasic system was studied. It was found that the catalytic activity increased obviously due to the addition of platinum. Ru/Pt bimetallic catalysts exhibited a strong synergistic effect when the molar ratio of Pt was in the range of 5%—80%. Under the mild conditions including a temperature of 25 ℃, a hydrogen pressure of 1.0 MPa and a Pt molar ratio of 20%, the conversion of p-chloronitrobenzene(p-CNB) reached 99.9%, with the selectivity to p-chloroaniline(p-CAN) equating to 99.4%. The Ru/Pt catalyst also showed high activity and selectivity for the hydrogenation of other chloro- and dichloro-nitrobenzenes with different substituted positions. In addition, the catalyst can be recycled five times without significant loss of activity.
基金Project(52004342) supported by the National Natural Science Foundation of ChinaProject(150240015) supported by the Innovation-Driven Project of Central South University,ChinaProject(2021JJ20065) supported by the Natural Science Fund for Outstanding Young Scholar of Hunan Province,China。
文摘Ti-6Al-4V alloy powder was prepared through a two-step reduction of a mixture of TiO_(2),V_(2)O_(5) and Al_(2)O_(3) in this study.The oxide mixture was first reduced by Mg in MgCl_(2) at 750℃ in argon,where oxygen was reduced to 2.47 wt%from 40.02 wt%.The oxygen content in the final powder was eventually reduced to an extremely low level(0.055 wt%)using calcium at 900℃ in argon,and the final powder had the composition of 90.12 wt%Ti,5.57 wt%Al,and 3.87 wt%V,which meets the standard specification of Ti-6Al-4V(ASTM F1108-09).Between the two reductions,a heat treatment step was designed to help controlling the specific surface area and particle size.The effect of the heat treatment temperature on the morphology,and composition uniformity of the powder was investigated in detail.Heat treatment above 1300℃ attributed to a dense powder with a controlled specific surface area.Thermodynamic modeling and experimental results indicated that onlyα-Ti enriched with Al andβ-Ti enriched with V exist in the final powder,and other possible phases including Al-Mg and Al-V were excluded.This study also offers a triple-step thermochemical process for producing high-purity Ti-based alloy powder.
文摘Quantitative representation of complicated behavior of fluid mixtures in the critical region by any of equation-of-state theories re-mains as a difficult thermodynamic topics to date. In the present work, a computational efforts were made for representing various types of critical loci of binary water with hydrocarbon systems showing Type II and Type III phase behavior by an elementary equation of state [called multi-fluid nonrandom lattice fluid EOS (MF-NLF EOS)] based on the lattice statistical mechanical theory. The model EOS requires two mo-lecular parameters which representing molecular size and interaction energy for a pure component and single adjustable interaction energy pa-rameter for binary mixtures. Critical temperature and pressure data were used to obtain molecular size parameter and vapor pressure data were used to obtain interaction energy parameter. The MF-NLF EOS model adapted in the present study correlated quantitatively well the critical loci of various binary water with hydrocarbon systems.
文摘The spindle behavior and MPF activity changes in the progression of oocyte maturation were investigated and compared with cytological observation and kinase assay between gynogenetic silver crucian carp and amphimictic colored crucian carp. MPF activity was measured by using histone H1 as phosphorylation substrate. There were two similar oscillatory MPF kinase activity changes during oocyte maturation in two kinds of fishes with different reproductive modes, but there existed some subtle difference between them. The subtle difference was that the first peak of MPF kinase activity was kept to a longerlasting time in the gynogenetic silver crucian carp than in the amphimictic colored crucian carp. It was suggested that the difference may be related to the spindle behavior changes, such as tripolar spindle formation and spindle rearrangement in the gynogenetic crucian carp.
基金Supported by the National Natural Science Foundation of China (50706006) and the Science and Technology Development Program of Jilin Province (20040513).
文摘The knowledge of flow regime is very important for quantifying the pressure drop, the stability and safety of two-phase flow systems. Based on image multi-feature fusion and support vector machine, a new method to identify flow regime in two-phase flow was presented. Firstly, gas-liquid two-phase flow images including bub- bly flow, plug flow, slug flow, stratified flow, wavy flow, annular flow and mist flow were captured by digital high speed video systems in the horizontal tube. The image moment invariants and gray level co-occurrence matrix texture features were extracted using image processing techniques. To improve the performance of a multiple classifier system, the rough sets theory was used for reducing the inessential factors. Furthermore, the support vector machine was trained by using these eigenvectors to reduce the dimension as flow regime samples, and the flow regime intelligent identification was realized. The test results showed that image features which were reduced with the rough sets theory could excellently reflect the difference between seven typical flow regimes, and successful training the support vector machine could quickly and accurately identify seven typical flow regimes of gas-liquid two-phase flow in the horizontal tube. Image multi-feature fusion method provided a new way to identify the gas-liquid two-phase flow, and achieved higher identification ability than that of single characteristic. The overall identification accuracy was 100%, and an estimate of the image processing time was 8 ms for online flow regime identification.
基金Project(51775561)supported by the National Natural Science Foundation of ChinaProject(20130162110004)supported by the National Doctoral Foundation of China
文摘The mathematical and simulation models of working head in the deep-sea working environment were built to analyze the effects of cutter-suction flow,cutter-head rotating speed,cutting depth and suction port position on the cutter-suction capacity.The efficiency of the cutter-suction is analyzed based on the analysis of the variation law of the solid-phase volume fraction of the flow field,the variation law of the velocity distribution in the flow field and the distribution law of the solid-phase concentration.The results show that the increase of cutter-suction flow can significantly improve the cutter-suction efficiency when it is less than1000m3/h.However,when it is more than1000m3/h,it is helpless.When the cutter-head rotate speed is within the range of10–25r/min,the cutter-suction efficiency stabilizes at about95%.While the speed is greater than25r/min,the cutter-suction efficiency decreases sharply with the increase of cutter-head rotate speed.With the increase of cutting depth,the cutter-suction efficiency first increases and then remains stable and finally decreases.The cutter-suction efficiency remains at about94%when the suction port position deviation ranges from0°to30°,but it has a sharply reduction when the deviation angle is more than30°.
基金Supported by the National Natural Science Foundation of China(No.29776039).
文摘The stretching and folding of fluid element during chaotic mixing field is studied using numerical method. The chaotic mixing process is caused by periodic secondary flow in a twisted curved pipe. Using the nonlinear discrete velocity field as the dynamical system, the present study connects the fluid particle's stretching along its trajectory in one period to a linearized time-varying variational equation. After numerical approximation of the variational equation, fluid stretching is calculated on the whole cross section. The stretching distribution shows an exponential fluid stretching and folding, which indicates an excellent mixing performance.