构建“向学”、“享学”的母语课堂

学习的主体是儿童,学习的本体是母语.一次南京市小学语文学科带头人教学研讨活动展示课上,教师紧扣年段目标,围绕识字、阅读和学习运用语言文字的主线,删繁就简,让学生在40分钟内经历学习过程,实践言语活动,构建了“向学”、“享学”的母语课堂.

“向学课堂”的“互联网+”校本实践

在'智慧校园'建设的背景下,南京市金陵中学实验小学立足学校自身文化特点,以'互联网+'思维做指导,以网络平台为技术支撑,促进信息技术与教育教学实践的深度融合。通过'1中心+6步骤'的操作策略、'1目标+N形式'的'云空间'建设,开展面向学生需要、基于学科特点、融合知识体系的'向学课堂'校本实践。

Role of inclination angle on columnar-to-equiaxed transition in the eutectic Al-5Mg-2Si alloy fabricated by laser powder bed fusion

In this study,the effect of inclination angles relative to the building direction in the additively manufactured eutectic Al-5Mg-2Si alloy was investigated through the laser powder bed fusion(LPBF).The microstructures and mechanical properties of the Al-5Mg-2Si alloy manufactured with different inclination angles(0°,30°,45°,60°and 90°)were reported and discussed.It is found that the“semicircular”melt pool(MP)in the load bearing face of 0°sample was eventually transformed into“stripe-like”MP in the 90°sample,accompanied by an increased fraction of melt pool boundaries(MPBs).Moreover,the microstructural analysis revealed that the columnar-to-equiaxed transition(CET)of theα-Al grains and eutectic Mg2Si was completed in the 90°sample,which were significantly refined with the average size of 10.6μm and 0.44μm,respectively.It is also found that the 90°sample exhibited good combination of strength and elongation(i.e.yield strength of 393 MPa,ultimate tensile strength of 483 MPa and elongation of 8.1%).The anisotropic mechanical properties were highly associated with the refined microstructures,thermal stress,and density of MPBs.Additionally,the CET driven by inclination angles was attributed to the variation of thermal conditions inside the local MPs.

Customized Optimization for Vehicle Acoustic Statistical Energy Analysis

Statistical Energy Analysis(SEA) is one of the conventional tools for predicting vehicle high-frequency acoustic responses.This study proposes a new method that can provide customized optimization solutions to meet NVH targets based on the specific needs of different project teams during the initial project stages.This approach innovatively integrates dynamic optimization,Radial Basis Function(RBF),and Fuzzy Design Variables Genetic Algorithm(FDVGA) into the optimization process of Statistical Energy Analysis(SEA),and also takes vehicle sheet metal into account in the optimization of sound packages.In the implementation process,a correlation model is established through Python scripts to link material density with acoustic parameters,weight,and cost.By combining Optimus and VaOne software,an optimization design workflow is constructed and the optimization design process is successfully executed.Under various constraints related to acoustic performance,weight and cost,a globally optimal design is achieved.This technology has been effectively applied in the field of Battery Electric Vehicle(BEV).

食品添加剂在我国食品加工中的应用现状

食品添加剂在现代食品工业生产中占据着非常重要的地位,与人们的日常饮食安全和身体健康息息相关。综述了我国食品添加剂的定义、作用、种类、相关法律法规和加工特点等,提出了食品添加剂在食品加工应用中存在的问题及相应解决措施,对进一步丰富我国食品添加剂理论研究,推动食品加工业高质量发展具有重要的社会和经济意义。

Defect image segmentation using multilevel thresholding based on firefly algorithm with opposition-learning

To segment defects from the quad flat non-lead QFN package surface a multilevel Otsu thresholding method based on the firefly algorithm with opposition-learning is proposed. First the Otsu thresholding algorithm is expanded to a multilevel Otsu thresholding algorithm. Secondly a firefly algorithm with opposition-learning OFA is proposed.In the OFA opposite fireflies are generated to increase the diversity of the fireflies and improve the global search ability. Thirdly the OFA is applied to searching multilevel thresholds for image segmentation. Finally the proposed method is implemented to segment the QFN images with defects and the results are compared with three methods i.e. the exhaustive search method the multilevel Otsu thresholding method based on particle swarm optimization and the multilevel Otsu thresholding method based on the firefly algorithm. Experimental results show that the proposed method can segment QFN surface defects images more efficiently and at a greater speed than that of the other three methods.

Microstructure and mechanical properties of 2A12 aluminum alloy after age forming

The comparative experiments of age forming and artificial aging of 2A12 aluminum alloy were carried out. The effect of the age forming on the microstructure and mechanical properties was investigated. The results demonstrate that the grains are further squashed and elongated compared with artificial aging due to the existence of the applied stress during the age forming. Meanwhile, the precipitated phases change from circle shape with random orientation of age forming to long strip shape with uniform orientation of artificial aging. The dislocation configuration in samples changes from ring dislocation or helical dislocation of the artificial aging to long and straight dislocation of the age forming. Otherwise, age forming slightly reduces the tensile properties and fracture toughness of the alloy and enhances its fatigue crack growth rate.

Monitoring Longitudinal Vehicular Velocity by Using Driving Wheels Information

In order to enhance the accuracy and overcome the limitation of representing the vehicular velocity with non driving wheel speed signals, which is commonly used in researching on automotive dynamic control systems at present, the dynamic and kinematics models of running vehicles and wheels are established. The concept that expresses vehicle velocity using only the driving wheel speed information with adjustable weight factors is described and an algorithm is proposed. A Matlab program with the algorithm embedded is made to simulate the vehicle’s accelerating under different road conditions, and it’s simulation results coincide well with the experimental results, which demonstrates the validity of the algorithm.

Effects of sputtering pressure on nanostructure and nanomechanical properties of AlN films prepared by RF reactive sputtering

Wurtzite aluminum nitride（AlN） films were deposited on Si（100） wafers under various sputtering pressures by radio-frequency（RF） reactive magnetron sputtering. The film properties were investigated by XRD, SEM, AFM, XPS and nanoindenter techniques. It is suggested from the XRD patterns that highly c-axis oriented films grow preferentially at low pressures and the growth of（100） planes are preferred at higher pressures. The SEM and AFM images both reveal that the deposition rate and the surface roughness decrease while the average grain size increases with increasing the sputtering pressure. XPS results show that lowering the sputtering pressure is a useful way to minimize the incorporation of oxygen atoms into the AlN films and hence a film with closer stoichiometric composition is obtained. From the measurement of nanomechanical properties of AlN thin films, the largest hardness and elastic modulus are obtained at 0.30 Pa.

Phishing detection method based on URL features

In order to effectively detect malicious phishing behaviors, a phishing detection method based on the uniform resource locator （URL） features is proposed. First, the method compares the phishing URLs with legal ones to extract the features of phishing URLs. Then a machine learning algorithm is applied to obtain the URL classification model from the sample data set training. In order to adapt to the change of a phishing URL, the classification model should be constantly updated according to the new samples. So, an incremental learning algorithm based on the feedback of the original sample data set is designed. The experiments verify that the combination of the URL features extracted in this paper and the support vector machine （SVM） classification algorithm can achieve a high phishing detection accuracy, and the incremental learning algorithm is also effective.

On the Construction of a Cognition-oriented College-English Teaching Model

This paper analyzes the negative influence of traditional English instruction as well as obsession with bilingual teaching, and sets forth a three-step development strategy in line with the cognitive characteristics of learners.

Microstructure and mechanical properties of isothermal multi-axial forging formed AZ61 Mg alloy

Microstructure and mechanical properties of AZ61 Mg alloy during isothermal multi-axial forging （MAF） were studied. The mechanisms of grain refinement and relationship between the microstructures and mechanical properties were discussed. The results show that the average grain size decreases with increasing the number of MAF passes. The grains are significantly refined at the 1st and 2nd MAF passes, and gradually refined at higher MAF passes. The initial grain size of 148 lam decreases to about 14 gm after 6 MAF passes. The grain refinement occurs mainly by continuous dynamic recrystallization. With increasing the MAF passes, both the tensile strength and the elongation to failure of the alloy are significantly enhanced.

On methods of ＂dual-way enjoyable teaching＂ of College English

English teaching in big classes, for Chinese college students, is the main channel to learn and practice English. In the process of a successful classroom teaching, students and teachers are required to cooperate with each other and mutually complete teaching activities in an enjoyable and harmonious atmosphere. This paper analyzes the current situation of College English teaching in China, and discusses the application of the methodology of ＂dual-way enjoyable teaching＂ in big classes, indicating that the classroom activities should be designed to enliven the class atmosphere, which is also the effective way to realize the aim of enjoyable teaching and enjoyable learning.

Biomechanical Characteristics of Rape Stalks

[Objective] To study the correlation between the biomechanical properties of rape stalks and rape stem lodging. [Method] Through axial compression tests to the stalks of 4 different rape varieties, the change rules of maximum stem bearing ca- pacity, maximum compressive strength, elastic modulus and moment of inertia along plant height were analyzed, as well as the effect of different varieties and water contents on the biomechanical property indices of rape stalks. [Result] The maximum loads of rape stalks presented liner decrease trend along with the increase of stem height, and all reached the maximums below the height of 50 cm. The maximum stem compressive strength and elastic modulus of the 4 varieties were increased with ascending height, but in a slow rate with small change, thus the modulus of e- lasticity could be considered as unchanged. The maximum bearing capacity, maxi- mum compressive strength and elastic modulus of dry rape stalks were higher than wet stalks, indicating that the water contents of rape stalks had significant effect on their mechanical properties. According to the actual lodging situations in filed, stalks of variety No. 1 owned the worst biomechanical properties and lodging degree, while the biomechanical properties of No. 6 and F5 were better than No. 1 and No. 9, and they also had stronger lodging-resistance. [Conclusion] The study provides parameters and bases for the design of mechanized production and mechanical deep processing of crops, and can better reveal the physical natures of organisms. The methods used in this study can also be used to screen excellent crop stalks.

Mixed grain structure and mechanical property anisotropy of AZ40 magnesium alloy bar with diameter of 160 mm

The mixed grain structure and mechanical property anisotropy of AZ40 magnesium alloy bar with a diameter of 160 mm manufactured by ＂multi-direction forging（MDF） ＋ extrusion ＋ online cooling＂ technique were investigated by optical microscopy（OM）, scanning electron microscopy（SEM）, X-ray diffraction macro-texture measurement and room temperature（RT） tensile test. The results show that mixed grain structure is caused by the micro-segregation of Al in semi-continuous casting ingot. Homogenization of（380 °C, 8 h） ＋（410 °C, 12 h） cannot totally eliminate such micro-segregation. During MDF and extrusion, the dendrite interiors with 3%-4% Al（mass fraction） transform to fine grain zones, yet the dendrite edges with about 6% Al transform to coarse grain zones. XRD macro-textures of the outer, R/2 and center show typical fiber texture characteristics and the intensity of [0001]//Ra D orientation in the outer（11.245） is about twice as big as those in the R/2（6.026） and center（6.979）. The as-extruded AZ40 magnesium alloy bar has high elongation（A） and moderate ultimate tensile strength（Rm） in both extrusion direction（ED） and radius direction（Ra D）, i.e., A of 19%-25% and Rm of 256-264 MPa; however, yield strength（Rp0.2） shows anisotropy and heterogeneity, i.e., 103 MPa in Ra D, 137 MPa in ED-C（the center） and 161 MPa in ED-O（the outer）, which are mainly caused by the texture.（155 °C, 7 h） ＋（170 °C, 24 h） aging has no influence on strength and elongation of AZ40 magnesium bar.

Effect of finish-rolling conditions on mechanical properties and texture characteristics of AM50 alloy sheet

The conventional hot rolling of AM50 alloy at different roll temperatures and speeds was performed to investigate the effects of finish-rolling conditions on the mechanical properties and texture of rolled sheet. The better combination between strength（ultimate tensile strength： 295 MPa; yield strength： 224 MPa） and ductility（22.9%） can be obtained for the AM50 sheet rolled at the roll temperature of 200 °C with the roll speed of 5 m/min. The yield stress depends strongly on roll temperature, while the texture intensity in rolled sheets is more sensitive to roll speed during hot rolling. Increasing rolling temperature or roll speed can improve the mechanical anisotropy of AM50 rolled sheets.

VIBRATION CHARACTERISTIC INVESTIGATION OF COUNTER-ROTATING DUAL-ROTOR IN AERO-ENGINE

Two methods for vibration characteristic investigation of the counter-rotating dual-rotors in an aero-en- gine are put forward. The two methods use DAMP tool on the MSC. NASTRAN platform and develope the re- solving sequence. Vibration characteristics of a turbofan engine are analyzed by using the two methods. Com- pared with results calculated using transfer matrix method and test results, the two methods are valuable and have great potential in practical applications for vibration characteristic investigation of aero-engines with high thrust-weight ratio.

Review on the Studies about Rapeseed by Two-dimensional Gel Electrophrosis

As rapeseed is a major oil crop with high quality vegetable oil and feed protein in China and the two-dimensional gel electrophoresis （2-DE） is an efficient technique for investigating protein expression, this paper reviews the innovations in 2-DE and its application in the studies of rapeseed. We conclude that 2-DE has provided much valuable information on rapeseed, and it will do more for rapeseed proteomic research in the near future with the technology innovations.

Mathematical Models of Tire-Lateral Road Adhesion for Use in Road Vehicle Dynamics Studies

Mathematical models of tire-lateral mad adhesion for use in mad vehicle dynamics studies are set up to express the relations of adhesion coefficients with slip ratio in lateral direction.The models of tire-lateral mad adhesion revolutionize the Pacejka's model in concept and therefore make it possible for applications in vehicle dynamics studies by the expression of lateral adhesion coefficient as a function of wheel slip ratio,instead of the wheel slip angle,taking into account in the mean time the influences of mad surface condition, vehicle velocity,vertical load,tire slip angle,and wheel camber angle.

基于相关向量机的电站锅炉NO_x燃烧优化

为了降低电站锅炉NOx排放量,采用一种新的机器学习方法——相关向量机对某330 MW煤粉汽包锅炉的一、二次风速以及含氧量等26个输入参数和NOx输出结果进行建模,并用万有引力算法对模型的参数进行优化,获得最优模型。与粒子群算法、遗传算法优化相关向量机以及万有引力算法优化支持向量机等进行了比较,选择锅炉输入参数中的可调变量为优化变量,以NOx低排放量为目标进行优化,获得低NOx排放的输入参数。结果证明：万有引力优化相关向量机算法建立的模型精确度比其它几种算法高,对模型进行低NOx优化后,NOx输出值由最初的的906.65 mg/m3变为550.600 mg/m3,下降幅度约为38.9%,实现了NOx排放量大幅度降低。