山东省级抖音政务号发展策略浅析

目前,短视频成为仅次于即时通信的第二大网络应用。政务抖音号因其权威性,在传播力和影响力上有着得天独厚的优势,成为发布权威信息、净化网络环境、引导向上向善网络风气的利器。本文以山东省抖音政务号为例,探索抖音政务号发展现状、发展困境,以及如何拉近与民众距离、把握舆论导向、提高传播质量与效率的方式方法。

Development of dust collection and removal technology of comprehensive mechanized excavation face

To solve the problem of excavation face dust control,the theory of dust removal after collection was put forward.Through a large number of theoretical and experimental researches,a new wind screen dust-collection system which was applied to comprehen- sive excavation face was developed.To set a wind dam in jet stream box,achieve the function of multi-stage and multiple-level regulation,lots of experimentation was carried out to obtain higher jet stream velocity with the minimum loss of energy.Experiments show that the slit width in the exports of wind screen dust-collection system should be 10 to 15 mm.For the general excavation roadway,after wind attenuation,the velocity can be greater than 3 m/s at the roof which meets the requirements of respirable dust control.

MULTI-GRANULE IMPACT MODEL OF NOPD AND ITS NUMERICAL SIMULATIONS

Aiming at the impaction among granules of non obstructive particle damping(NOPD), the vibration absorption model for vertical impact of granules is established by adopting Hertz contact theory. The numerical simulation of the granules movement process is proceeded, and the vibration response of a free free uniform beam is obtained for the case when all granules act on it. Through this method, the effect on vibration absorption of impaction is investigated. The simulational data show that multi gra nule vertical impaction is not sensitive to the movement clearance. The vibration absorption is also very well when the clearance changes within a large range. Therefore, the phenomenon that the vibration magnitude may increase if the clearance in a single impact body is improperly selected will not happen. The effect of vibration suppression in the range of middle and high frequencies(2 500~6 000 Hz) is better than that in the range of low frequency(<2 500 Hz). It indicates that the effect on vibration absorption of multi granule can well restrain the vibration of middle and high frequencies.

Adsorption of lead ions by a kind of MAL modified hydrogel beads

Hydrogel-Ⅰ was fabricated via sodium alginate in situ-embedding with MAL powders and then applied to decontaminating Pb(Ⅱ) from water. Conditions for preparing Hydrogel-Ⅰ and the adsorption of Pb(Ⅱ) over Hydrogel-I were optimized through response surface methodology coupled with central composite design. XPS revealed that the groups of —OH, —COO—, —NH, —NHand —CSS— carried by Hydrogel-Ⅰ were responsible for the uptake of Pb(Ⅱ). Ions exchange, surface complexation, electrostatic attraction and pore-filling effect contributed to the adsorption process. Adsorption performances of Pb(Ⅱ) by Hydrogel-Ⅰ and MAL powders were compared. Although they exhibited similar adsorption rate and maximum adsorption capacity(qm), the reusing ability of Hydrogel-Ⅰ was better and it was easier to be separated from aqueous solution after treatment. Even compared with organic hydrogel materials,Hydrogel-Ⅰ presented relatively quick adsorption speed and high adsorption capacity. It can be concluded that Hydrogel-Ⅰ could be an alternative scavenger for the treatment of Pb(Ⅱ) from aqueous solution.

Recovery of rare earth element ytterbium(Ⅲ) by dried powdered biomass of spirulina: Adsorption isotherm, kinetic and thermodynamic study

The adsorption characteristics and mechanisms of spirulina powder were investigated when it was used as adsorbent to recover ytterbium(Ⅲ) from wastewater solution. Surface structure and element valence of the adsorbent were analyzed by SEM and XPS for the exploring of its adsorption mechanism for ytterbium(Ⅲ). The adsorption characteristics of ytterbium(Ⅲ) on spirulina powder was analyzed through assessing adsorption isotherm, kinetics and thermodynamic models. The adsorption isotherm data were best explained by Langmuir model, and the adsorption capacity of spirulina powder for ytterbium(Ⅲ) was 72.46 mg/g when adsorption temperature was 318 K. The kinetic experiment results showed that the pseudo-second order kinetic model can better simulate the adsorption process of spirulina powder to ytterbium(Ⅲ), indicating that the rate-controlling step was chemical adsorption. Spirulina can be an efficient and economical ytterbium(Ⅲ) recycling material, because it showed good adsorption stability and reusability from the adsorption-desorption cycle experiment results.

Application study on complex wetting agent for dust-proof after gas drainage by outburst seams in coal mines

After gas drainage, the outburst seam is dry and, consequently, during subsequent mechanized mining, unwanted dust production is extensive. Because the hard dustfall typically has a small particle size it contains a high percentage of respirable dust. Considering these factors, this paper improved the efficiency of dustfall by reducing the surface tension of the liquid used as a wetting agent, then configuring five kinds of wetting agents by adopting various doses and types of surfactants, neutral inorganic salts and chemical additives, etc. After purchasing DA-85 and SRJ-1 wetting agent, the surface tension and critical micelle concentration of seven kinds of wetting agents were measured using the capillary rise method. Wetting agent A was confirmed to have the best comprehensive effect. The experiments were optimized by measuring and comparatively analyzing contact angles of pure water, SRJ-1 wetting agent and wetting agent A on the surface of different coal samples using a contact angle measurement instrument （HARKE- SPCA）. By comparative analysis, dust-proof effects of seam, dynamic pressure water infusion and high- pressure spray in the tunneling face at the Daning coal mine using pure water, wetting agent SRJ-1 and A, it was determined that after using wetting agent A, the average dust concentration in the place of the mining machine driver, 10 m and 110 m away from the tunneling front is approximately 300 rag/ m^3, 240 mg/m^3 and 100 mg/m^3, respectively, This practice increased the dust-proof efficiency dramati- cally and achieved a good comprehensive dust-proof effect.

Adsorption Behavior of Methyl Orange onto Modified Ultrafine Coal Powder

The adsorption of methyl orange onto ultrafine coal powder （UCP） and modified ultrafine coal powder （MUCP） from aqueous solutions were studied, in which the influence of contact time, dosage, temperature, pH, and methyl orange concentration in the solution were investigated. The adsorption kinetics of methyl orange by UCP and MUCP can be described by the Lagergren first-order and pseudo second-order kinetic models, respectively. The adsorption isotherms of methyl orange onto MUCP at 303, 313 and 323 K follow the Freundlich and Langmuir isotherm equation. Values of △G^0 for methyl orange adsorption onto MUCP are -22.55, -23.10 and -23.79 kJ·mol^-1 at 303, 313, and 323 K, respectively. The values of △H^0 and △S^0 are -3.74 kJ· mol^-1 and 61.99 J·mol^-1, respectively. The adsorption process is spontaneous and exothermic.

A new design of foam spray nozzle used for precise dust control in underground coal mines

In order to improve the utilization rate of foam,an arc jet nozzle was designed for precise dust control.Through theoretical analysis,the different demands of foam were compared amongst arc jets,flat jets and full cone jets when the dust source was covered identically by foam.It is proved that foam consumption was least when an arc jet was used.Foam production capability of an arc jet nozzle under different conditions was investigated through experiments.The results show that with the gas liquid ratio(GLR)increasing,the spray state of an arc jet nozzle presents successively water jet,foam jet and mist.Under a reasonable working condition range of foam production and a fixed GLR,foam production quantity increases at first,and then decreases with the increase of liquid supply quantity.When the inner diameter of the nozzle is 14 mm,the best GLR is 30 and the optimum liquid supply quantity is0.375 m^3/h.The results of field experiments show that the total dust and respirable dust suppression efficiency of arc jet nozzles is 85.8%and 82.6%respectively,which are 1.39 and 1.37 times higher than the full cone nozzles and 1.20 and 1.19 times higher than the fiat nozzles.

Microwave digestion and alkali fusion assisted hydrothermal synthesis of zeolite from coal fly ash for enhanced adsorption of Cd(Ⅱ) in aqueous solution

A novel microwave digestion and alkali fusion assisted hydrothermal method was proposed to synthesize zeolite from coal fly ash and the zeolite product was studied for removal of Cd(II)from aqueous solution through batch experiments.The adsorbent was characterized by X-ray diffraction,scanning electron microscopy,Fourier transform infrared spectroscopy,surface area analyzer and zeta potential measurement.The results show that the synthetic zeolite was identified as faujasite.The optimum conditions for removal of Cd(II)are found to be:adsorbent dose of0.5g/L,pH6,contact time of90min and initial concentration of20mg/L,the removal rate of Cd(II)is98.55%.The experimental kinetic data agree well with the pseudo second-order equation;the Langmuir isotherm model is found to be more suitable to explicate the experimental equilibrium isotherm results than Freundlich,Dubinin-Radushkevich and Temkin models,and the maximum adsorption capacity of Cd(II)is found to be86.96mg/g.The thermodynamic parameters such asΔGΘ,ΔHΘandΔSΘwere evaluated and the results show that the adsorption of Cd(II)onto the as-synthesized zeolite is spontaneous,endothermic and feasible under studied conditions.

Adsorption of residual amine collector HAY from aqueous solution by refined carbon from coal fly ash and activated carbon

Refined carbon(RC) derived from coal fly ash(CFA) as well as powdered activated carbon(PAC) was investigated as adsorbent to remove residual amine collector HAY from aqueous solution.The RC and PAC were characterized by scanning electron microscopy(SEM),surface area measurement,Zeta potential measurement and Fourier transform infrared(FTIR) spectroscopy.The effect factors and mechanisms of HAY adsorption onto RC and PAC were studied in detail.The results show that the experimental kinetic data agree well with the pseudo second-order equation,and the Langmuir isotherm model is found to be more appropriate to explicate the experimental equilibrium isotherm results than the Freundlich model.The adsorption capacities of PAC and RC increase with pH.It is found that alkaline condition is conducive to the adsorption of HAY onto PAC and RC and the adsorption efficiency of RC is close to PAC at pH near 11.Zeta potential variation of adsorbents suggests that HAY generates electrostatic adsorption onto RC and PAC.FTIR analysis shows that the adsorption is dominantly of a physical process.The Box-Behnken design optimization conditions of process are RC 1 g/L,pH 11,temperature 302 K and initial HAY concentration 100 mg/L.Under these conditions,the measured adsorption ratio and adsorption capacity are 87.91%and 87.91 mg/g,respectively.Thus,the RC is considered to be a potential adsorbent for the removal of residual amine from aqueous solution.

Preparation of chitosan modified fly ash under acid condition and its adsorption mechanism for Cr(VI)in water

Chitosan-coated fly ash(CWF)was prepared by the acid leaching-coating method.Chitosan and fly ash were crosslinked in the solution of acetic acid and sulfuric acid.The microstructure of CWF was conducted by scanning electron microscope(SEM)and X-ray diffraction(XRD).The removal of Cr(VI)from water by CWF was studied by adsorption experiments.The composite prepared by the experiment developed a pore structure and a crystal structure similar to SiO_(2) and chitosan chain-like coating was formed on the surface of fly ash.The new modified material has larger surface roughness,specific surface area and more adsorption channels.The Cr(VI)was enriched in modified materials by electrostatic adsorption between CrO_(4)^(2−)、CrO_(7)^(2−)and-NH_(3)^(+) group and surface acid functional groups.The movement of Cr(VI)in solution is a diffusion process from the main body of the liquid phase to the surface of the liquid film.

Adsorption property of citrate dispersant on BaTiO_3 particles in aqueous solution

Dispersion behavior of ultra fine BaTiO3 particles in the aqueous solution of ammonium citrate （NH4-CA） or citric acid lanthanum chelate （NH4-La-CA） was investigated. The dispersion property was characterized with sedimentation value. It is easier to obtain well dispersed slurry with NH4La-CA than NH4-CA. In an attempt to better understand the role of citric acid radical, simulation of the dispersant adsorption on BaTiO3 particle was performed with universal force field （UFF）. It is demonstrated that the interaction between citric acid radical and BaTiO3 particle surface is a weak chemical adsorption. Trivalent citric acid radical is adsorbed on BaTiO3 particle surface with maximal adsorption energy. And, larger molecules of NH4-La-CA formed by adding La^3＋ lead to better dispersion property than NHn-CA.

Structure and properties of forming adsorbents prepared from different particle sizes of coal fly ash

In this paper, different particle sizes of coal fly ash FA-R(D50= 15.75 μm), FA-A(D50= 3.61 μm) and FA-B(D50= 1.73 μm) were treated with Na OH solution to prepare the forming adsorbents FFA-R, FFA-A and FFA-B.The structure and adsorption properties of the forming adsorbents for methylene blue(MB) from aqueous solution were examined. The results showed that the specific surface areas and adsorption capacities of the forming adsorbent for MB increased with decreasing particle size of raw coal fly ashes. The adsorption kinetic data of MB on FFA-R, FFA-A and FFA-B fitted the second-order kinetic model very well with the rate constants(k2) of3.15 × 10-2, 3.84 × 10-2and 6.27 × 10-2g·mg-1·min-1, respectively. The adsorption process was not only controlled by intra-particle diffusion. The isotherms of MB on FFA-R, FFA-A and FFA-B can be described by the Langmuir isotherm and the Freundlich isotherm, and the adsorption processes were spontaneous and exothermic.

Effect of modified starches on depression of diaspore

Four modified starches with selected charge characteristics including cationic starch(CAS),carboxymethyl starch(CMS),amphoteric starch(AMS) and soluble starch(SS) were investigated as depressants for diaspore in reverse flotation test using cationic collector(dodecylamine).Adsorption examination,Zeta potential measurement and Fourier transform infrared(FTIR) spectroscopy were used to clarify the role of the surface charge characteristics of starches in determining the adsorption behavior and depression performance as well as the mineral-starch interaction.Results show that the positively charged starches(CAS and AMS) display higher adsorption amounts and also better depression performance compared with the non-ionic(SS) and anionic starch(CMS),benefiting from the favorable electrostatic attraction with diaspore and also electrostatic repulsion with collector.FTIR spectroscopy proves the presence of hydrogen bonds and chemical complexation between mineral and starches in an integrated manner.

Ethanol-Water Near-Azeotropic Mixture Dehydration by Compound Starch-Based Adsorbent

Ethanol-water near-azeotropic mixture dehydration was investigated by formulated compound starchbased adsorbent(CSA), which consists of corn, sweet potato and foaming agent. The net retention time and separation factor of water over ethanol were measured by inverse gas chromatography(IGC). Results indicated that water has a longer net retention time than ethanol and that low temperature is beneficial to this dehydration process. Orthogonal test was conducted under different vapor feed flow rates, bed temperatures and bed heights, to obtain optimal fixed-bed dehydration condition. Dynamic saturated adsorbance was also studied. It was found that CSA has the same water adsorption capacity(0.15 g/g)as some commercial molecular sieves. Besides, this biosorptive dehydration process was found to be the most energy-efficient compared with other ethanol purification processes.

Influence of Fly Ash and Sewage Sludge Application on Cadmium and Lead Sorption by an Acidic Alfisol

The safe recycling of fly ash (FA) and sewage sludge (SS) in the agricultural processes comprises an important environmental technology on waste management. Soils amended with FA and SS may change their ability to adsorb heavy metals due to either increase of soil pH or decomposition of sludge-borne organic matter. Thus, Cd and Pb sorption was investigated by 1-month incubation under soil moisture content at field capacity and room temperature with an acidic Typic Haploxeroalf from central Greece amended with varying amounts of FA and SS. Batch experiments were conducted by equilibrating the soil samples with CaCl2 solutions containing 0-400 mg Pb L-1 or 0-100 mg Cd L-1. The results showed that the Freundlich equation described well the Cd and Pb sorption. Distribution coefficient (Kd) values of Pb were higher than those of Cd in all the treatments of this study. Application of FA increased Kd values for Cd and Pb to 8.2 and 2.3 times more than the controls, respectively. Simultaneous applications of FA and SS caused a Kd increase of 3.8 and 2.1 times compared to the treatments that received only SS for Cd and Pb, respectively. Treatment of SS alone did not significantly change Cd and Pb sorption compared to the controls. The sorption reactions seemed to be mainly affected by soil pH, which was revealed by the significant correlations of Cd and Pb sorption with soil pH. These suggested that fly ash was very useful as a low-cost adsorbent for Cd and Pb and could be used as an ameliorant for biosolid-amended acidic soils.

Preparation of magnetic gelatin-starch microspheres and adsorption performance for bovine serum album

The magnetic gelatin-starch microspheres were prepared by modified emulsion cross-linking method with glutaraldehyde as the cross-linking agent. The structure, size distribution as well as morphology of magnetic microspheres were investigated by FT-IR spectrometer, dynamic laser scattering analyzer and scanning electron microscope, respectively. Bovine serum album(BSA)was chosen as model protein, and the adsorption processes were carried out under diversified conditions including BSA initial concentration, p H value, adsorption time and temperature to evaluate the performance of the magnetic microspheres. The average diameter of optimized spherical magnetic microspheres is 1.6 μm with excellent dispersivity, and the saturation magnetization is found to be equal to 1.056×10-2 A·m2. The adsorption isotherm of the BSA on the magnetic microspheres basically obeys the Langmuir model, with a maximum adsorption capacity of 120 mg/g and an adsorption equilibrium constant of 1.60 mL/mg.

Preparation of superabsorbent by graft copolymerization of acrylic acid onto corn starch using K_2S_2O_8 and rare earths as initiators

K2 S2 O8 and rare earths （RE） were used as initiators to prepare superabsorbents by graft copolymerization of acrylic acid （ AA ） onto corn starch. The effects of monomer concentration, initiator K2 S2 O8 concentration, cross-linker concentration, reaction temperature and the concentration ratio of RE and K2 S2O8 on the graft copolymerization were studied in terms of the water absorption capacity of superabsorbents. Results indicate that the optimum conditions obtained for the grafting of AA onto 5g starch are as follows： AA of 75. 773 g/L, K2S20s of 0. 437 g/L, RE of 0. 874 g/L, cross-linker of 0. 381 g/L and temperature of 70 ℃. The maximum water absorption capacity obtained is 740 g/g. The new method of graft polymerization is easily proceeded and controlled. The graft copolymers were characterized by infra-red spectroscopy, scanning electron microscopy and TG. Results characterized by IR and SEM give strong evidence for grafting of AA onto corn starch, and those characterized by TG reveal that the grafting of AA improves the theimostability of corn starch.

Migration law of respirable dust on a super-long fully mechanized double-shearer working face

In order to understand the migration law of respirable dust and gain reasonable design parameters for dust control on a super-long double-shearer fully mechanized working face, this paper describes research carried out using a numerical simulation package(Fluent) based on gas-solid coupling dispersed multiphase flow model and field measurement to research different technology modes, dust distribution law at different intervals where shearers work in opposite directions on the lower 9303 face, No. 2 Jining Mine,Yankuang Coal Mining Co. Results show that the concentration of dust 3–6 m away from the shearers working in the same directions was large, while the impact area of respirable dust near the shearer increased significantly to 5–6 m with the distance between two shearers working in opposite directions.The concentration of dust on a double-shearer face was considerably higher than that of a face with one shear under the combined effect of wind speed on the face and disturbed wind around the shearer, while the dust concentration near the shearer on the return side was considerably higher than that on the inlet side. The concentration of dust on a double-shearer face along the airflow declined slowly so that dust was hard to control. Simulation results confirmed the results of field measurement, which could provide reference for dust prevention design.

The Effect of Coal Fly Ash Treatment with NaOH on the Characters and Adsorption Capacity toward Pb（Ⅱ） in the Solution

Coal fly ash （CFA） generated by coal-based thermal power plants is mainly composed of some oxides having high crystallinity, including quartz and mullite. In this study, the effect of CFA crystallinity toward its capacity on Pb（Ⅱ） adsorption was investigated. CFA with various crystaUinity was obtanied by refluxing it with sodium hydroxide （NaOH） solution having various concentrations （1-7 M） at various temperature and reflux time. To evaluate the effect of crystallinity of treated CFA on the adsorption capacity, adsorption of Pb（Ⅱ） solution with treated CFA was carried out. The research shows that the reflux of CFA with NaOH solution leads to the crystallinity of quartz and mullite in CFA decreased. The decrease is proportional with the concentration increasing, the temperature elevation, and the longer time. The reflux using NaOH solution with high concentration （〉 3 M） in addition causes a decrease in the crystallinity of quartz and mullite, also results in the formation of hydroxysodalite. The decrease of the CFA crystalllinity gives an increase in CFA adsorption capacity toward Pb（Ⅱ） solution.