通过诊断滤芯监测飞机动力系统与传输系统状态

飞机飞行过程中,通过对滤芯上污染物的收集、检测来监视飞机动力系统与传输系统中被油浸润的机械组件工作及磨损状态。收集到的微粒,污物,例如金属屑、炭化物和硅砂,会集中在“污染警报滤芯”的诊断层上。诊断层很容易移除,这样,在飞机的正常飞行及维护期间,通过更换滤芯,移除并检查诊断层,就可以及时获取相关组件磨损情况的信息。并且,还可以对检测层污染物进行进一步晶粒或光谱检查分析,判断污染物的成分,就可以分析发动机可能会出现的问题,并对相关组件进行有针对性的维护。

Multi-Sensor Intelligent System for On-Line and Real-Time Moneitoring Tool Cutting State in FMS

The principle and the constitution of an intelligent system for on-line and real-time montitoring tool cutting state were discussed and a synthetic sensors schedule combined a new type fluid acoustic emission sensor (AE) with motor current sensor was presented. The parallel communication between control system of machine tools, the monitoring intelligent system,and several decision-making systems for identifying tool cutting state was established It can auto - matically select the sensor way ,monitoring mode and identifying method in machining process- ing so as to build a successful and effective intelligent system for on -line and real-time moni- toring cutting tool states in FMS.

Development and Application of On-Line Corrosion Monitoring Device for Condenser Tube

This paper introduces the development and industrial application of an on-line corrosion monitoring device for condenser tubes. Corrosion sensors are made up of representative condenser tubes chosen by eddy current test, which enable the monitoring result to be consistent with the corrosion of actual condenser tubes. Localized corrosion rate of condenser tubes can be measured indirectly by a galvanic couple made up of tube segments with and without pits. Using this technology, corrosion problems can be found in time and accurately, and anticorrosive measures be made more economic and effective. Applications in two power plants showed the corrosion measurements are fast and accurate.

On-Line Monitoring of Grinding Status Based on Rough Set Theory

This paper focuses on the new approach of on line monitoring of grinding burn and wheel wear based on the rough set theory. This method adopts the grinding chip flow thermal signal, and acquires identification rules by establishing sensitive characteristic parameters and constructing the knowledge system through continuum attribute discretization, attribute reduction and knowledge acquisition, and then monitors grinding burn and wheel wear in accordance with the acquired rules. The experiment results show that the new method is effective.

On-Line Monitoring of Cutting Tool Fracture & Wear

A technique of detecting cutting tool fracture and ultimate wear by si- multaneously monitoring both the spindle motor current and cutting process related acoustic emission(AE)in the cutting process is reported.The technique can detect breakage of drills having diameter over 0.8mm,turning cutter crack of area over 0.2mm,and the ultimate wear.The principle,system construction,experimental method and result of the technique are discussed.The ratio of success in detection approaches 96% or higher.

On-line Batch Process Monitoring with Improved Multi-way Independent Component Analysis

In the past decades, on-line monitoring of batch processes using multi-way independent component analysis （MICA） has received considerable attention in both academia and industry. This paper focuses on two troublesome issues concerning selecting dominant independent components without a standard criterion and deter- mining the control limits of monitoring statistics in the presence of non-Gaussian distribution. To optimize the number of key independent components~ we introctuce-anoveiconcept of-system-cleviation, which is ab^e＇io＇evalu[ ate the reconstructed observations with different independent components. The monitored statistics arc transformed to Gaussian distribution data by means of Box-Cox transformation, which helps readily determine the control limits. The proposed method is applied to on-line monitoring of a fed-hatch penicillin fermentation simulator, and the ex- _perimental results indicate the advantages of the improved MICA monitoring compared to the conventional methods.

Online Supervision of Penicillin Cultivations Based on Rolling MPCA

To reduce the variations of the production process in penicillin cultivations, a rolling multivariate statis-tical approach based on multiway principle component analysis (MPCA) is developed and used for fault diagnosis of penicillin cultivations. Using the moving data windows technique, the static MPCA is extended for use in dy-namic process performance monitoring. The control chart is set up using the historical data collected from the past successful batches, thereby resulting in simplification of monitoring charts, easy tracking of the progress in each batch run, and monitoring the occurrence of the observable upsets. Data from the commercial-scale penicillin fer-mentation process are used to develop the rolling model. Using this method, faults are detected in real time and the corresponding measurements of these faults are directly made through inspection of a few simple plots (t-chart, SPE-chart, and T2-chart). Thus, the present methodology allows the process operator to actively monitor the data from several cultivations simultaneously.

Statistical Monitoring of Chemical Processes Based on Sensitive Kernel Principal Components

The kernel principal component analysis （KPCA） method employs the first several kernel principal components （KPCs）, which indicate the most variance information of normal observations for process monitoring, but may not reflect the fault information. In this study, sensitive kernel principal component analysis （SKPCA） is proposed to improve process monitoring performance, i.e., to deal with the discordance of T2 statistic and squared prediction error SVE statistic and reduce missed detection rates. T2 statistic can be used to measure the variation di rectly along each KPC and analyze the detection performance as well as capture the most useful information in a process. With the calculation of the change rate of T2 statistic along each KPC, SKPCA selects the sensitive kernel principal components for process monitoring. A simulated simple system and Tennessee Eastman process are employed to demonstrate the efficiency of SKPCA on online monitoring. The results indicate that the monitoring performance is improved significantly.

Comparative analysis of online monitoring methods for transformer insulation performance of 330-750kV substation

The online-monitoring methods for insulation performance of current transformers of 330-750 kV substation are analyzed and compared.The effectiveness and availability of each method are discussed.Main features,advantages and disadvantages of each method and its corresponding standard are also described.

On-line Monitoring for Phosphorus Removal Process and Bacterial Community in Sequencing Batch Reactor

For efficient energy consumption and control of effluent quality, the cycle duration for a sequencing batch reactor (SBR) needs to be adjusted by real-time control according to the characteristics and loading of waste-water. In this study, an on-line information system for phosphorus removal processes was established. Based on the analysis for four systems with different ecological community structures and two operation modes, anaerobic-aerobic process and anaerobic-anaerobic process, the characteristic patterns of oxidation-reduction potential (ORP) and pH were related to phosphorous dynamics in the anaerobic, anoxic and aerobic phases, for determination of the end of phosphorous removal. In the operation mode of anaerobic-aerobic process, the pH profile in the anaerobic phase was used to estimate the relative amount of phosphorous accumulating organisms (PAOs) and glycogen accumulat-ing organisms (GAOs), which is beneficial to early detection of ecology community shifts. The on-line sensor val-ues of pH and ORP may be used as the parameters to adjust the duration for phosphorous removal and community shifts to cope with influent variations and maintain appropriate operation conditions.

An inverse method for online stress monitoring and fatigue life analysis of boiler drums

A method based on solution of the inverse heat conduction problem was presented for online stress monitoring and fatigue life analysis of boiler drums. The mathematical model of the drum temperature distribution is based on the assumptions that the difference of temperature along the longitudinal axis of the boiler drum is negligible with changes only in the radial direction and the circumferential direction, and that the outer surface of drum is thermaUy insulated. Combining this model with the control-volume method provides temperatures at different points on a cross-section of the drum. With the temperature data, the stresses and the life expectancy of the boiler drum are derived according to the ASME code. Applying this method to the cold start-up process of a 300 MW boiler demonstrated the absence of errors caused by the boundary condition assumptions on the inner surface of the drum and testified that the method is an applicable technique for the online stress monitoring and fatigue life analysis of boiler drums.

A recognition method of vibration parameter image based on improved immune negative selection algorithm for rotating machinery

To overcome the limitations of traditional monitoring methods, based on vibration parameter image of rotating machinery, this paper presents an abnormality online monitoring method suitable for rotating machinery using the negative selection mechanism of biology immune system. This method uses techniques of biology clone and learning mechanism to improve the negative selection algorithm to generate detectors possessing different monitoring radius, covers the abnormality space effectively, and avoids such problems as the low efficiency of generating detectors, etc. The result of an example applying the presented monitoring method shows that this method can solve the difficulty of obtaining fault samples preferably and extract the turbine state character effectively, it also can detect abnormality by causing various fault of the turbine and obtain the degree of abnormality accurately. The exact monitoring precision of abnormality indicates that this method is feasible and has better on-line quality, accuracy and robustness.

Online Predictive Monitoring and Prediction Model for a Periodic Process Through Multiway Non-Gaussian Modeling

A new on-line predictive monitoring and prediction model for periodic biological processes is proposed using the multiway non-Gaussian modeling. The basic idea of this approach is to use multiway non-Gaussian modeling to extract some dominant key components from daily normal operation data in a periodic process, and subsequently combining these components with predictive statistical process monitoring techniques. The proposed predictive monitoring method has been applied to fault detection and diagnosis in the biological wastewater-treatment process, which is based on strong diurnal characteristics. The results show the power and advantages of the proposed predictive monitoring of a continuous process using the multiway predictive monitoring concept, which is thus able to give very useful conceptual results for a daily monitoring process and also enables a more rapid detection of the process fault than other traditional monitoring methods.

Dynamic Fault Model for On-Line Evaluation of Yarn End Breakage during Ring Spinning

In this paper, a dynamic fault model is proposed to predict yarn end breakage in the spinning procedure through investigation of fault characteristics. In view of the principle that uniformity bad in raw material causes iustable yarn formation, the investigation focuses on the fault characteristic existing in the dynamic tension. Analyzing the dynamic spinning system, the phenomenon of over random shock in a spinning triangle is discovered to be the main physical event prior to yarn end breakage. The fault characteristic is further confirmed by dynamic tests and signal processing, and can be used to make an approach to predicting yarn end breakage. A relative energy feature is defined for evaluating the tendency of yarn end breakage, and its effectiveness is verified by on.line monitoring tests in the laboratory. The research results show that the proposed dynamic fault model has not only an advantage in indicating the presence of fault characteristics, but also great potentials in quantitating fault in online spinning monitoring.

On-line Batch Process Monitoring and Diagnosing Based on Fisher Discriminant Analysis

A new on-line batch process monitoring and diagnosing approach based on Fisher discriminant analysis （FDA） was proposed. This method does not need to predict the future observations of variables, so it is more sensitive to fault detection and stronger implement for monitoring. In order to improve the monitoring performance, the variables trajectories of batch process are separated into several blocks. The key to the proposed approach for on-line monitoring is to calculate the distance of block data that project to low-dimension Fisher space between new batch and reference batch. Comparing the distance with the predefine threshold, it can be considered whether the batch process is normal or abnormal. Fault diagnosis is performed based on the weights in fault direction calculated by FDA. The proposed method was applied to the simulation model of fed-batch penicillin fermentation and the resuits were compared with those obtained using MPCA. The simulation results clearly show that the on-line monitoring method based on FDA is more efficient than the MPCA.

On-Line Life Monitoring Technique for Tube Bundles of Boiler High-Temperature Heating Surface

High-temperature heating surface such as superheater and reheater of large-sized utility boiler all experiences a relatively severe working conditions. The failure of boiler tubes will directly impact the safe and economic operation of boiler. An on-line life monitoring model of high-temperature heating surface was set up according to the well-known L-M formula of the creep damages. The tube wall metal temperature and working stress was measured by on-line monitoring, and with this model, the real-time calculation of the life expenditure of the heating surface tube bundles were realized. Based on the technique the on-line life monitoring and management system of high-temperature heating surface was developed for a 300 MW utility boiler. An effective device was thus suggested for the implementation of the safe operation and the condition-based maintenance of utility boilers.

Platform Construction of Regional Energy Management Center

Based on the analysis of different requirements of energy management center construction and the data acquisition of various industries in wide area network, as well as the practices of real-lime online system, the paper puts forward the construction scheme of regional energy management center （REMC） which can achieve real time online monitoring of organizations＇ energy consumption via data collection, and also proposes the design idea of energy data acquisition based on national standards.

Online Monitoring the Products Quality by Measuring Cavity Pressure during Injection Molding

Injection molding is a complicated production technique for the manufacturing of polymer products. During injection molding, it＇s hard to predict molding quality; the injection molding parameters, such as mold temperature, melt temperature, packing pressure and packing time, affect the final properties of product. The cavity pressure is a significant key factor. Residual stress and injection molding weight are significantly affected by the cavity pressure. This study created an approach to predict weight of injection-molded by real-time online cavity pressure monitoring. This study uses a 6-inch with thickness lmm light guide panel and the largest area beneath the pressure curve of time as well as the maximum pressure as its characteristic. The upper and lower limits of the control are set to ＋2 standard deviations, and GUI （Graphical User Interface）-based LabVIEW software is used to perform calculation and analysis of the pressure curve. The results of the experiment show that the online internal cavity pressure monitoring system can effectively monitor the quality of the molded products. In 500 injection molding cycle tests, its error rate was less than 8%, whereas the deviation in mass of the molded products selected through the system＇s filtering process was successfully controlled to be within ±4%.

Thermo-mechanical properties of bowl-shaped grinding wheel and machining error compensation for grinding indexable inserts

In order to meet the technical requirements of grinding the circumferential cutting edge of indexable inserts, thermo-mechanical properties of bowl-shaped grinding wheel in high speed grinding process and the influence of dimension variations of the grinding wheel on machining accuracy were investigated. Firstly, the variation trends of the dimension due to centrifugal force generated in different wheel speeds were studied and the effect of stress stiffening and spin softening was presented. Triangular heat flux distribution model was adopted to determine temperature distribution in grinding process. Temperature field cloud pictures were obtained by the finite element software. Then, dimension variation trends of wheel structure were acquired by considering the thermo-mechanical characteristic under combined action of centrifugal force and grinding heat at different speeds. A method of online dynamic monitoring and automatic compensation for dimension error of indexable insert was proposed. By experimental verification, the precision of the inserts satisfies the requirement of processing.

Research on the On-line Monitoring System of Battery Power

Through the comparison of various acquisition technology and related technology theory of the existing scheme, the paper analyze and design the power battery testing platform of the data acquisition system, and give the research design scheme of the utility model through the design of the software on PC and CAN bus, which makes the full synchronization requirements acquisition unit; improve the linearity and stability of total voltage and current acquisition by the integrated circuit, and improve the system sampling rate, effectively complete the corresponding index. Finally, through experimental verification, to ensure the completion of the technical indicators.