“场”性视角下AR技术在数字媒体专业课程教学改革中的应用研究

随着信息技术的普及,高校教学的内容与形式正在向多元化、信息化的方向发展,AR技术在教育领域的应用范围逐步扩大。本文从“场”性视角审视AR技术在数字媒体专业课程教学改革中的应用,分析其意义与优势,并从教学理念、教学措施等方面提出专业课程建设的创新策略和应用方向。

Dynamic Phase Field Description on Ductile Fracture Process

In comparison to discrete descriptions of fracture process,the recently proposed phase field methodology averts the numerical tracking strategy of discontinuities in solids,which enables the numerical implement simplification.An implicit finite element formulation based on the diffuse phase field is extended for stable and efficient analysis of complex dynamic fracture process in ductile solids.This exhibited formulation is shown to capture entire range of the characteristics of ductile material presenting J2-plasticity,embracing plasticization,cracks initiation,propagation,branching and merging while fulfilling the basic principle of thermodynamics.Herein,we implement a staggered time integration scheme of the dynamic elasto-plastic phase field method into the commercial finite element code.The numerical performance of the present advanced phase field model has been examined through several classic dynamic fracture benchmarks,and in all cases simulation results are in good agreement with the associated experimental data and other numerical results in previous literature.

Mild polarization electric field in ultra-thin BN-Fe-graphene sandwich structure for efficient nitrogen reduction

The electrocatalytic N_(2)reduction reaction(NRR)is expected to supersede the traditional Haber-Bosch technology for NH3 production under ambient conditions.The activity and selectivity of electrochemical NRR are restricted to a strong polarized electric field induced by the catalyst,correct electron transfer direction,and electron tunneling distance between bare electrode and active sites.By coupling the chemical vapor deposition method with the poly(methyl methacylate)-transfer method,an ultrathin sandwich catalyst,i.e.,Fe atoms(polarized electric field layer)sandwiched between ultrathin(within electron tunneling distance)BN(catalyst layer)and graphene film(conducting layer),is fabricated for electrocatalytic NRR.The sandwich catalyst not only controls the transfer of electrons to the BN surface in the correct direction under applied voltage but also suppresses hydrogen evolution reaction by constructing a neutral polarization electric field without metal exposure.The sandwich electrocatalyst NRR system achieve NH3 yield of 8.9μg h^(−1)cm^(−2)and Faradaic Efficiency of 21.7%.The N_(2)adsorption,activation,and polarization electric field changes of three sandwich catalysts(BN-Fe-G,BN-Fe-BN,and G-Fe-G)during the electrocatalytic NRR are investigated by experiments and density functional theory simulations.Driven by applied voltage,the neutral polarized electric field induced by BN-Fe-G leads to the high activity of electrocatalytic NRR.

On capped Higgs positivity cone

The Wilson coefficients of the standard model effective field theory are subject to a series of positivity bounds.It has been shown that while the positivity part of the ultraviolet(UV)partial wave unitarity leads to the Wilson coefficients living in a convex cone,further including the nonpositivity part caps the cone from above.For Higgs scattering,a capped positivity cone was obtained using a simplified,linear unitarity condition without utilizing the full internal symmetries of Higgs scattering.Here,we further implement stronger nonlinear unitarity conditions from the UV,which generically gives rise to better bounds.We show that,for the Higgs case in particular,while the nonlinear unitarity conditions per se do not enhance the bounds,the fuller use of the internal symmetries do shrink the capped positivity cone significantly.

Elastic Field of a Straight Dislocation in One Dimensional Hexagonal Quasicrystals *L

Aim To study dislocation elasticity theory in quasicrystals. Methods A dislocation was separated into pure edge part and pure screw part and their superposition was used to find the elastic field. Results and Conclusion The elastic solution of a straight dislocation parallel to the quasiperiodic axis in 1D hexagonal quasicrystals was obtained and the generalized Peach Koehler force on a dislocation in quasicrystals was given.

Stochastic Air Traffic Flow Management for Demand and Capacity Balancing Under Capacity Uncertainty

This paper introduces an innovative approach to the synchronized demand-capacity balance with special focus on sector capacity uncertainty within a centrally controlled collaborative air traffic flow management(ATFM)framework.Further with previous study,the uncertainty in capacity is considered as a non-negligible issue regarding multiple reasons,like the impact of weather,the strike of air traffic controllers(ATCOs),the military use of airspace and the spatiotemporal distribution of nonscheduled flights,etc.These recessive factors affect the outcome of traffic flow optimization.In this research,the focus is placed on the impact of sector capacity uncertainty on demand and capacity balancing(DCB)optimization and ATFM,and multiple options,such as delay assignment and rerouting,are intended for regulating the traffic flow.A scenario optimization method for sector capacity in the presence of uncertainties is used to find the approximately optimal solution.The results show that the proposed approach can achieve better demand and capacity balancing and determine perfect integer solutions to ATFM problems,solving large-scale instances(24 h on seven capacity scenarios,with 6255 flights and 8949 trajectories)in 5-15 min.To the best of our knowledge,our experiment is the first to tackle large-scale instances of stochastic ATFM problems within the collaborative ATFM framework.

Preparation and wear properties of TiB_2/Al-30Si composites via in-situ melt reactions under high-energy ultrasonic field

TiB2/Al-30Si composites were fabricated via in-situ melt reaction under high-energy ultrasonic field. The microstructure and wear properties of the composite were investigated by XRD, SEM and dry sliding testing. The results indicate that TiB2 reinforcement particles are uniformly distributed in the aluminum matrix under high-energy ultrasonic field. The morphology of the TiB2 particles is in circle-shape or quadrangle-shape, and the size of the particles is 0.1-1.5μm. The primary silicon particles are in quadrangle-shape and the average size of them is about 10μm. Hardness values of the Al-30Si matrix alloy and the TiB2/Al-30Si composites considerably increase as the high energy ultrasonic power increases. In particular, the maximum hardness value of the in-situ composites is about 1.3 times as high as that of the matrix alloy when the ultrasonic power is 1.2 kW, reaching 412 MPa. Meanwhile, the wear resistance of the in-situ TiB2/Al-30Si composites prepared under high-energy ultrasonic field is obviously improved and is insensitive to the applied loads of the dry sliding testing.

Electric field assisted chemical conversion process of AZ91D magnesium alloy in HCO_3^-/CO_3^(2-) solution

A new method for synthesizing Mg-Al hydrotalcite conversion coating on AZ91D Mg alloy was developed by the application of electric field （EF）. By using EF technique, the formation time of the coating can be significantly reduced. The SEM results indicate that a continuous and compact Mg-Al hydrotalcite coating is formed on the surface of Mg alloy after short time EF treatment. However, a long time treatment would make the coating partially exfoliate. The corrosion current density （Jcor ） of the coated sample （EF1＋1 h） is approximately two orders of magnitude lower than that of Mg alloy substrate. The test of electrochemical impedance spectroscopy （EIS） and immersion corrosion also suggest that the coating can effectively protect Mg alloy against corrosion.

Comparable study on typhoon and strong northern wind characteristics of the Runyang Suspension Bridge based on field tests

The strong wind characteristics of the Runyang Suspension Bridge（ RSB） including the wind speed and direction, the turbulence intensity, the turbulence integral length and power spectrum are analyzed based on measurement data from the wind environment monitoring subsystem of the structural health monitoring system （SHMS）of the RSB and field tests during strong winds. The differences between the typhoon and the strong northern wind are especially studied. It is found that the mean wind speed of the strong northern wind is a little smaller and the mean wind direction is more stable than that of the typhoon. The turbulence intensity of both the typhoon and the strong northern wind is greater than the values suggested in Chinese code, and the turbulence integral length difference between the typhoon and a strong northern wind is not clear. As for the along-wind turbulence power spectrum, the spectrum of the strong northern wind can fit the Kaimal spectrum better than that of the typhoon. The obtained results can provide measurement data for founding a strong wind characteristic database and determining the strong wind characteristic parameter values of the RSB.

Impact of correlated private signals on continuous-time insider trading

A model of continuous-time insider trading in which a risk-neutral in-sider possesses two imperfect correlated signals of a risky asset is studied.By conditional expectation theory and filtering theory,we first establish three lemmas:normal corre-lation,equivalent pricing and equivalent profit,which can guarantee to turn our model into a model with insider knowing full information.Then we investigate the impact of the two correlated signals on the market equilibrium consisting of optimal insider trading strategy and semi-strong pricing rule.It shows that in the equilibrium,(1)the market depth is constant over time;(2)if the two noisy signals are not linerly correlated,then all private information of the insider is incorporated into prices in the end while the whole information on the asset value can not incorporated into prices in the end;(3)if the two noisy signals are linear correlated such that the insider can infer the whole information of the asset value,then our model turns into a model with insider knowing full information;(4)if the two noisy signals are the same then the total ex ant profit of the insider is increasing with the noise decreasing,while down to O as the noise going up to infinity;(5)if the two noisy signals are not linear correlated then with one noisy signal fixed,the total ex ante profit of the insider is single-peaked with a unique minimum with respect to the other noisy signal value,and furthermore as the noisy value going to O it gets its maximum,the profit in the case that the real value is observed.

N-S EQUATION CALCULATIONS ON MULTI-ELEMENT AIRFOILS WITH ZONAL PATCHED GRIDS

For a complex flow about multi-element airfoils a mixed grid method is set up. C-type grids are produced on each element′s body and in their wakes at first, O-type grids are given in the outmost area, and H-type grids are used in middle additional areas. An algebra method is used to produce the initial grids in each area. And the girds are optimized by elliptical differential equation method. Then C-O-H zonal patched grids around multi-element airfoils are produced automatically and efficiently. A time accurate finite-volume integration method is used to solve the compressible laminar and turbulent Navier-Stokes (N-S) equations on the grids. Computational results prove the method to be effective.

CMOS FinFET Fabricated on Bulk Silicon Substrate

A CMOS FinFET fabricated on bulk silicon substrate is demonstrated.Besides owning a FinFET structure similar to the original FinFET on SOI,the device combines a grooved planar MOSFET in the Si substrate and the fabrication processes are fully compatible with conventional CMOS process,including salicide technology.The CMOS device,inverter,and CMOS ring oscillator of this structure with normal poly silicon and W/TiN gate electrode are fabricated respectively.Driving current and sub threshold characteristics of CMOS FinFET on Si substrate with actual gate length of 110nm are studied.The inverter operates correctly and minimum per stage delay of 201 stage ring oscillator is 146ps at V d=3V.The result indicates the device is a promising candidate for the application of future VLSI circuit.

Seismic reflection characteristics of fluvial sand and shale interbedded layers

A sedimentary geological model is established in order to study the seismic reflection characteristics of channel sand bodies. Synthetic seismic shot gathers are simulated using the acoustic wave equation and then are prestack time migrated. On the imaged data, the reflection characteristics and instantaneous attributes are analyzed and log-constrained impedance inversion is tested. Because of wave field interference, the experimental results show that seismic events do not definitely correspond to the channel sand bodies and that seismic modes of occurrence do not represent the actual ones. The seismic events formed by wave interference may lead to errors and pitfalls in sand body interpretation. The corresponding relations between instantaneous seismic attributes and sedimentary sands are not well established. Log-constrained impedance inversion improves the resolution of channel sands. However, if the inverted resolution is forced to be too high, artifacts related to the initial model may occur.

An Evaluation of STD/AIDS Health Education among Female Sex Workers in Entertainment Establishments in Jingjiang City

Objective: To explore effective ways of conducting STD/AIDS health education among female commercial sex workers in entertainment establishments and to promote implementation of an 100% condom use programme. Methods: In-depth interviews were carried out to collect qualitative information about demographic characteristics, STD/AIDS knowledge, attitude and risk behaviors of female sex workers. Female sex workers were selected by sampling and were given baseline survey and assessment after intervention. Based on the results of the interviews, a questionnaire was developed, and intervention measures were determined. These measures included face-to-face interviewing, counseling, and distribution of STD/AIDS information and condoms. Results: 196 and 182 female sex workers of the same population were interviewed separately before and after intervention. STDs/AIDS knowledge had significantly increased after one year's intervention (P <0.01). Knowledge increased in both the intervention group and the non-intervention group but the increase was more significant among sex workers who received the intervention. Risk behaviors remained at baseline levels in both groups. Conclusion: STD/AIDS health education among female sex workers in entertainment establishments was effective and may benefit society, but the strategies need to be adjusted to the female sex workers' lifestyles, particularly their high rates of mobility and high-risk behaviors.

A simplified model for extreme-wave kinematics in deep sea

Based on the fifth-order Stokes regular wave theory, a simplified model for extreme-wave kinematics in deep sea was developed. In this model, from the wave records the average of two neighboring wave periods for the extreme crest or trough was defined as the period of the Stokes wave by the up and down zero-crossing methods. Then the input wave amplitude was deduced by substituting the wave period and extreme crest or trough into the expression for the fifth-order Stokes wave elevation. Thus the corresponding formula for the wave velocity can be used to describe kinematics beneath the extreme wave. By comparison with the published numerical models and experimental data, the proposed model is validated to be able to calculate the extreme wave velocity rather easily and accurately.

Electroplastic effect in AZ31B magnesium alloy sheet through uniaxial tensile tests

The electroplastic effect in AZ31B magnesium alloy sheet was investigated through uniaxial tensile tests. In order to show the athermal effect of the electrical pulses, two types of uniaxial tensile tests at the same testing temperature were carried out： uniaxial tension in environmental cabinet and uniaxial tension with electrical pulses. In addition, the distribution of temperature field in the cross-section area during uniaxial tension with electrical pulses was simulated. The results show that the distribution of temperature field along the cross-section area is homogeneous. By comparing the true stress？true strain curves of AZ31B alloy under uniaxial tensile tests, the athermal effect with electrical pulses was confirmed. The microstructure evolution after the uniaxial tension was studied by optical microscopy. The results indicate that the electrical pulses induced dynamic recrystallization plays an important role in the decrease of flow stress. Finally, a flow stress model of AZ31B sheet taking the influence of electroplastic effect into account was proposed and validated. The results demonstrate that the calculated data fit the experimental data well.

Elastic Strain Field Distribution of a Self-Organized Growth Lensed-Shaped Quantum Dot by Finite Element Method

The stress and strain fields in self-organized growth coherent quantum dots （QD） structures are investigated in detail by two-dimension and three-dimension finite element analyses for lensed-shaped QDs. The nonobjective isolate quantum dot system is used. The calculated results can he directly used to evaluate the conductive band and valence band confinement potential and strain introduced by the effective mass of the charge carriers in strain QD.

Effect of thatch on water-soluble phosphorus of pasture soil fertilized with broiler litter

The presence of a thatch layer in established pastures could reduce the contact between broiler litter and soil, thus increasing the potential for surface runoff contamination with litter P. We conducted a laboratory study to evaluate the effect of a thatch layer on the dynamics of water-soluble P in undisturbed cores taken from a pasture. Cores with and without a thatch layer received a surface application of broiler litter (5 thm-2) and were incubated at 25 oC for 56 d. The result showed that on the soil surface the contents of water soluble-P (39 kghm-2) of the cores with the thatch layer was higher than that (20 kghm-2) of the cores without the thatch layer. Therefore on well-established pastures fertilized with broiler litter, the presence of a thatch layer might lead to high concentrations of water-soluble P on the soil surface.

Effect of atomic structure on migration characteristic and solute segregation of ordered domain interfaces formed in Ni_(75)Al_xV_(25-x)

Based on the microscopic phase-field model, ordered domain interfaces formed between D022 （Ni3V） phases along [001] direction in Ni75AlxV25-x alloys were simulated, and the effects of atomic structure on the migration characteristic and solute segregation of interfaces were studied. It is found that the migration ability is related to the atomic structure of interfaces, and three kinds of interfaces can migrate except the interface （001）//（002） which has the characteristic of L12 （Ni3Al） structure. V atoms jump to the nearest neighbor site and substitute for Ni, and vice versa. Because of the site selectivity behaviors of jumping atoms, the number of jumping atoms during the migration is the least and the jumping distance of atoms is the shortest among all possible modes, and the atomic structures of interfaces are unchanged before and after the migration. The preferences and degree of segregation or depletion of alloy elements are also related to the atomic structure of interface.

Asymmetric cast-rolling of 1050 aluminum alloy strip under multi-energy field

Technological parameters of asymmetric cast-rolling under multi-energy field were investigated on horizontal twin roll caster（d400 mm×500 mm）, and their effects on structures and properties of 1050 strips were analyzed by comparing with traditional cast-rolling. Results show that when length of cast-rolling area is 70 mm, melt temperature of head box is 670 °C, cast rolling speed is 1.3 m/min, exciting current is 10 A, center frequency is（13±1） Hz, ultrasonic power is 200 W and ultrasonic frequency is（20±0.2） kHz, the 1050 strip with the best microstructure can be prepared successfully; its center segregated layer disappears; the average grain size is reduced by about 40%; the crystal grains are distributed evenly; micro segregation decreases obviously; the precipitated phases are distributed along the grain boundaries evenly; and the tensile strength, yield strength, elongation and micro-hardness of cast-rolled strip are improved by 22.6%, 23.66%, 38.75% and 9.90%, respectively.