蒙古族村落社会“套布”的由来、适用范围及现代性阐释

在当今蒙古族村落社会转变经营方式中,"套布"经营作为一种环保和增收双赢模式脱颖而出,并在这一转换中扮演着重要角色;它是社会经济发展中自然产生的一种模式。因此,它便具有了很强的可持续性和生命力。以"套布"为视点,运用学科理论和方法,并参照政府有关农村地区的政策和法规,进而把"套布"这一生产方式作为阐述理由,在对其由来、适用范围及所具有的现代属性等详加论证的基础上,尽可能地释放"套布"模式所包含的能量和价值,并以此为政府和有关部门的政策出台和决策依据提供参考。

Geostress measurements near fault areas using borehole stress-relief method

To minimize negative effects of geostress distribution on mining safety near the fault areas, the UPM40 triaxial geostress testing system was introduced to conduct in-situ geostress measurements at three sites and nine points by the borehole stress-relief method. The results of strain?confining pressure curves show that rock masses at the three measuring sites exhibit comprehensive linear elasticity in spite of various fissures or cracks within rocks. Horizontal and vertical stress components distribute discrepantly near the fault areas, and the maximum lateral pressure coefficient is as high as 6.15. The maximum principle stress ranges from 8.01 to 14.93 MPa, and stress directions are in the range of N78.07°W?N17.55°W. Geostresses near fault areas are dominated by the horizontal tectonic stresses, while the lower values, compared to those under similar geological conditions are due to stress release by the fault. Additionally, the fault and shear stress nearby are partially responsible for asymmetric elongation and southwesterly migration of orebodies.

Seismic strengthening of reinforced concrete columns damaged by rebar corrosion using combined CFRP and steel jacket

In order to study the effectiveness of combined carbon fiber-reinforced polymer （CFRP） sheets and steel jacket in strengthening the seismic performance of corrosion-damaged reinforced concrete （RC） columns, twelve reinforced concrete columns are tested under combined lateral cyclic displacement excursions and constant axial load. The variables studied in this program include effects of corrosion degree of the rebars, level of axial load, the amount of CFRP sheets and steel jacket. The results indicate that the combined CFRP and steel jacket retrofitting technique is effective in improving load-carrying, ductility and energy absorption capacity of the columns. Compared with the corrosion-damaged RC column, the lateral load and the ductility factor of many strengthened columns increase more than 90% and 100%, respectively. The formulae for the calculation of the yielding load, the maximum lateral load and the displacement ductility factor of the strengthened columns under combined constant axial load and cyclically increasing lateral loading are developed. The test results are also compared with the results obtained from the proposed formulae. A good agreement between calculated values and experimental results is observed.

Computational screening of O‐functional MXenes for electrocatalytic ammonia synthesis

The nitrogen reduction reaction(NRR)using new and efficient electrocatalysts is a promising al‐ternative to the traditional Haber‐Bosch process.Nevertheless,it remains a challenge to design efficient catalysts with improved catalytic performance.Herein,various O‐functional MXenes were investigated as NRR catalysts by a combination of density functional theory calculations and least absolute shrinkage and selection operator(LASSO)regression.Nb_(3)C_(2)O_(X) has been regarded as a promising catalyst for the NRR because of its stability,activity,and selectivity.The poten‐tial‐determining step is*NH_(2) hydrogenation to*NH3 with a limiting potential of-0.45 V.Further‐more,via LASSO regression,the descriptors and equations fitting the relationship between the properties of O‐functional MXenes and NRR activity have been proposed.This work not only pro‐vides a rational design strategy for catalysts but also provides machine learning data for further investigation.

Experimental Research of Pressure Distribution in the Casing of Inducer

In this paper the inducer of the advanced-researched pump is studied. During multi-rotation speed experimentwith the medium of water, the dynamic pressures near inducer casing are obtained by transducer at each measuringpoint mounted on the casing along the axial direction, both in the steady rotation speed period and the up anddown period. Bases on analyses, the regularity of the axial distribution of time averaged pressure and pressurepulsation amplitude, the connection between pressure pulsation frequency and rotation speeds, and the relationshipbetween the pressure pulsation amplitude and the site of inducer blade are obtained.

Direct dynamical characterization of higher-order topological phases with nested band inversion surfaces

Higher-order topological phases(HOTPs) are systems with topologically protected in-gap boundary states localized at their ed à nT-dimensional boundaries, with d the system dimension and n the order of the topology. This work proposes a dynamics-based characterization of one large class of Z-type HOTPs without specifically relying on any crystalline symmetry considerations. The key element of our innovative approach is to connect quantum quench dynamics with nested configurations of the socalled band inversion surfaces(BISs) of momentum-space Hamiltonians as a sum of operators from the Clifford algebra(a condition that can be partially relaxed), thereby making it possible to dynamically detect each and every order of topology on an equal footing. Given that experiments on synthetic topological matter can directly measure the winding of certain pseudospin texture to determine topological features of BISs, the topological invariants defined through nested BISs are all within reach of ongoing experiments. Further, the necessity of having nested BISs in defining higher-order topology offers a unique perspective to investigate and engineer higher-order topological phase transitions.

Post-J test inference in non-nested linear regression models

This paper considers the post-J test inference in non-nested linear regression models. Post-J test inference means that the inference problem is considered by taking the first stage J test into account. We first propose a post-J test estimator and derive its asymptotic distribution. We then consider the test problem of the unknown parameters, and a Wald statistic based on the post-J test estimator is proposed. A simulation study shows that the proposed Wald statistic works perfectly as well as the two-stage test from the view of the empirical size and power in large-sample cases, and when the sample size is small, it is even better. As a result,the new Wald statistic can be used directly to test the hypotheses on the unknown parameters in non-nested linear regression models.