Surface integrity of a new damage-tolerant titanium alloy （TC21）, including surface roughness, microhardness and metallurgical structure is investigated when normal and high speed milling are used at different tool ...Surface integrity of a new damage-tolerant titanium alloy （TC21）, including surface roughness, microhardness and metallurgical structure is investigated when normal and high speed milling are used at different tool wear status. Results show that good surface integrity of TC21 can be obtained in high speed milling. In addition, even in acutely worn stages, there is no so-called serious hardening layer （or white layer） according to the studies on microhardness and metallurgical structure.展开更多
The surface of grinding 10Ni3MnCuAl steel is processed by the shot peening with different intensities. After shot peening, the metallographic structure of 10Ni3MnCuAl steel and the micro-structure on the surface layer...The surface of grinding 10Ni3MnCuAl steel is processed by the shot peening with different intensities. After shot peening, the metallographic structure of 10Ni3MnCuAl steel and the micro-structure on the surface layer are analyzed. The micro-hardness in the shot peening affected layer and the residual pressure stress are surveyed. The changes of surface quality, such as micro-hardness, metallographic structure and residual stress caused by shot peening are investigated. The result shows that shot peening can significantly improve surface quality and fatigue life of 10Ni3MnCuAl steel. The over peening effect is produced when the shot peening intensity is high, and it leads to the decrease of the fatigue life. When the optimal arc high value of shot peening is 0. 40 mm in experiments, the best surface quality is obtained and the depth of the residual stress in the precipitation-hardening layer reaches 450μm.展开更多
The signal integrity problem in 0.18μm CMOS technology is analyzed from simulation.Several rules in this phenomenon are found by analyzing the crosstalk delay and noise,which are helpful for the future circuit design.
The device is used for the test on the fuze detonating time according to the initial velocity of the projectile and the altitude and speed of enemy aircraft flight. For the special requirements of the high-speed signa...The device is used for the test on the fuze detonating time according to the initial velocity of the projectile and the altitude and speed of enemy aircraft flight. For the special requirements of the high-speed signal acquisition in the process, the characteristics of the measured signal are analyzed. The system is investigated in chip selection, signal transmission, signal processing, signal storage, post-production PCB design, etc. The appropriate measures and solutions which affect the integrity and accuracy of the signal in each process are proposed. The rules for the layout of the device and wiring are made. The result show that the measurement values are accurate without loss of data.展开更多
The conception of multilevel security (MLS) is commonly used in the study of data model for secure database. But there are some limitations in the basic MLS model, such as inference channels. The availability and data...The conception of multilevel security (MLS) is commonly used in the study of data model for secure database. But there are some limitations in the basic MLS model, such as inference channels. The availability and data integrity of the system are seriously constrained by it′s 'No Read Up, No Write Down' property in the basic MLS model. In order to eliminate the covert channels, the polyinstantiation and the cover story are used in the new data model. The read and write rules have been redefined for improving the agility and usability of the system based on the MLS model. All the methods in the improved data model make the system more secure, agile and usable.展开更多
This paper presents a new method to seek the conserved quantity from a Lie symmetry without using either Lagrangians or Hamiltonians for nonholonomic systems. The differential equations of motion of the systems are es...This paper presents a new method to seek the conserved quantity from a Lie symmetry without using either Lagrangians or Hamiltonians for nonholonomic systems. The differential equations of motion of the systems are established. The definition of the Lie symmetrical transformations of the systems is given, which only depends upon the infinitesimal transformations of groups for the generalized coordinates. The conserved quantity is directly constructed in terms of the Lie symmetry of the systems. The condition under which the Lie symmetry can lead to the conserved quantity and the form of the conserved quantity are obtained. Finally, an example is given to illustrate the application of the result.展开更多
MATLAB software and optimal complete subgraph algorithm were used to extract and reveal the microsatellite distribution features in the complete genomes of the tobacco vein clearing virus （NC-003 378.1） from the NCB...MATLAB software and optimal complete subgraph algorithm were used to extract and reveal the microsatellite distribution features in the complete genomes of the tobacco vein clearing virus （NC-003 378.1） from the NCBI database.The results showed that the repetitions number and their location of the N-base group has been extracted and displayed.The largest repetitions of N-base group in the complete genomes of the tobacco vein clearing virus was decreased as the exponential function with the increasing of N.The method used in this study could be applied to the extraction and revealing of the microsatellite distribution features in the complete genomes of other viruses,thereby provided a basis for the research of the structure and the law of function,inheritance and variation by the using of the microsatellite distribution features.展开更多
The purpose of this work relates to study on the characteristics of ultra thin gate oxide (2 5nm thickness) and the effect of metal Al,Zr,and Ta contamination on GOI.The controlled metallic contamination experiments...The purpose of this work relates to study on the characteristics of ultra thin gate oxide (2 5nm thickness) and the effect of metal Al,Zr,and Ta contamination on GOI.The controlled metallic contamination experiments are carried out by depositing a few ppm contaminated metal and low pH solutions on the wafers.The maximum metal surface concentration is controlled at about 10 12 cm -2 level in order to simulate metal contamination during ultra clean processing.A ramped current stress for intrinsic charge to breakdown measurements with gate injection mode is used to examine the characteristics of these ultra thin gate oxides and the effect of metal contamination on GOI.It is the first time to investigate the influence of metal Zr and Ta contamination on 2 5nm ultra thin gate oxide.It is demonstrated that there is little effect of Al contamination on GOI,while Zr contamination is the most detrimental to GOI,and early breakdown has happened to wafers contaminated by Ta.展开更多
In-service hydrocarbons must be transported at high temperature and high pressure to ease the flow and prevent the solidification of the wax fraction. The pipeline containing hot oil will expand longitudinally due to ...In-service hydrocarbons must be transported at high temperature and high pressure to ease the flow and prevent the solidification of the wax fraction. The pipeline containing hot oil will expand longitudinally due to the rise in temperature. If such expansion is resisted, for example by frictional effects over a kilometer or so of pipeline, compressive axial stress will be built up in the pipe-wall. The compressive forces are often so large that they induce vertical buckling of buffed pipelines, which can jeopardize the structural integrity of the pipeline. A typical initial imperfection named continuous support mode of submarine pipeline was studied. Based on this type of initial imperfection, the analytical solution of vertical thermal buckling was introduced and an elastic-plasticity finite element analysis （FEA） was developed. Both the analytical and the finite element methodology were applied to analyze a practice in Bohai Gulf, China. The analyzing results show that upheaval buckling is most likely to build up from the initial imperfection of the pipeline and the buckling temperature depends on the amplitude of initial imperfection. With the same amplitude of initial imperfection, the triggering temperature difference of upheaval buckling increases with covered depth of the pipeline, the soil strength and the friction between the pipeline and subsoil.展开更多
Neonatal gonocytes are precursors of spermatogonial stem cells. Preserving their integrity by elimination of damaged germ cells may be crucial to avoid the transmission of genetic alterations to progeny. Using 7-irrad...Neonatal gonocytes are precursors of spermatogonial stem cells. Preserving their integrity by elimination of damaged germ cells may be crucial to avoid the transmission of genetic alterations to progeny. Using 7-irradiation, we investigated by immunohistochemistry, flow cytometry and real-time PCR components of the death machinery in neonatal gonocytes. Their death was correlated with caspase 3 activation but not with AIF translocation into the nu- cleus. The in vivo contribution of both the extrinsic and the intrinsic pathways was then investigated. We focused on the roles of TRAIL/Death Receptor 5 （DR5） and PUMA. Our results were validated using knockout mice. Whereas DR5 expression was upregulated at the cell surface after radiation, caspase 8 was not activated. However, we detected caspase 9 cleavage associated with cytochrome c release. In mice deficient for PUMA, radiation-induced gonocyte apoptosis was reduced, whereas invalidation of TRAIL had no effect. Overall, our results show that genotoxic stressinduced apoptosis of gonocytes is caspase-dependent and involves almost exclusively the intrinsic pathway. Furthermore, PUMA plays a critical role in the maintenance of genomic integrity of spermatogonial stem cell precursors.展开更多
Maintaining caprock integrity is prerequisite for hydrocarbon accumulation. And gypsolyte caprock integrity is mainly affected by fracturing. Composition, damage behavior and mechanical strength of Paleocene Artashi F...Maintaining caprock integrity is prerequisite for hydrocarbon accumulation. And gypsolyte caprock integrity is mainly affected by fracturing. Composition, damage behavior and mechanical strength of Paleocene Artashi Formation gypsolyte rock that seals significant petroleum in the Kashi Sag of Tarim Basin had been revealed via X-ray diffraction and triaxial compression test. The results indicate the Artashi Formation can be lithologically divided into the lower and upper lithologic members. The lower member comprises gypsum as the dominant mineral, and the cohesion and friction coefficient are 8 MPa and 0.315, respectively. Similarly, the upper lithologic member consists mainly of anhydrite at the cohesion and coefficient of internal friction values of 18 MPa and 0.296. Given that the failure criterion and brittle-ductile transition factors during burial, the sealing integrity of Artashi Formation can be quantized for seven different stages. The reservoirs at the bottom of Artashi Formation caprock buried from 2285 m to 3301 m are expected to be the most favorable exploration target in the Kashi Sag.展开更多
Wuhan Tianxingzhou Changjiang (WTC) Bridge and Nanjing Dashengguan Changjiang (NDC) Bridge are two super high-speed railway 3-trusses composite bridges. This is the first time of using three trusses in such large brid...Wuhan Tianxingzhou Changjiang (WTC) Bridge and Nanjing Dashengguan Changjiang (NDC) Bridge are two super high-speed railway 3-trusses composite bridges. This is the first time of using three trusses in such large bridges in the world. These two types of railway floor systems of the two bridges have never been used in China before. The problem how to conform the deformations and stress levels of the railway floor system of WTC Bridge was studied. After finite element analysis and comparison,the plan of arranging one expansion stringer every two panels in railway floor system were proposed and good effect was obtained. Because of the application of three trusses,the allocation of the loads acted on the deck in three trusses is different and varies in different places of NDC Bridge. This problem was studied by model experiment and 3D finite element analysis. The results of 3D FEM analysis coincide with the model test results. The allocation rule of the loads acting on the deck in three trusses was presented. Because of the application of monolithic decks,the stiffness and structural integrity of NDC Bridge are high.展开更多
Two new types of conserved quantities deduced by Noether-Mei symmetry of nonholonomic mechanicalsystem are studied.The definition and criterion of Noether-Mei symmetry for the system are given.A coordinationfunction i...Two new types of conserved quantities deduced by Noether-Mei symmetry of nonholonomic mechanicalsystem are studied.The definition and criterion of Noether-Mei symmetry for the system are given.A coordinationfunction is introduced,and the conditions under which the Noether-Mei symmetry leads to the two types of conservedquantities and the forms of the two types of conserved quantities are obtained.An illustrative example is given.Thecoordination function can be selected according to the demand for finding the gauge function,and the choice of thecoordination function has multiformity,so more conserved quantities deduced from Noether-Mei symmetry of mechanicalsystem can be obtained.展开更多
How to keep cloud data intact and available to users is a problem to be solved. Authenticated skip list is an important data structure used in cloud data integrity verification. How to get the membership proof of the ...How to keep cloud data intact and available to users is a problem to be solved. Authenticated skip list is an important data structure used in cloud data integrity verification. How to get the membership proof of the element in authenticated skip list efficiently is an important part of authentication. Kaouthar Blibech and Alban Gabillon proposed a head proof and a tail proof algorithms for the membership proof of elements in the authenticated skip list. However, the proposed algorithms are uncorrelated each other and need plateau function. We propose a new algorithm for computing the membership proof for elements in the authenticated skip list by using two stacks, one is for storing traversal chain of leaf node, the other is for storing authentication path for the leaf. The proposed algorithm is simple and effective without needing plateau function. It can also be applicable for other similar binary hash trees.展开更多
基金Supported by the National Natural Science Foundation of China(50975141)the National Scienceand Technology Major Project(2010ZX04012-042)the Aeronautical Science Foundation(2010352005)~~
文摘Surface integrity of a new damage-tolerant titanium alloy （TC21）, including surface roughness, microhardness and metallurgical structure is investigated when normal and high speed milling are used at different tool wear status. Results show that good surface integrity of TC21 can be obtained in high speed milling. In addition, even in acutely worn stages, there is no so-called serious hardening layer （or white layer） according to the studies on microhardness and metallurgical structure.
基金Supported by the National Natural Science Foundation of China(50675104)~~
文摘The surface of grinding 10Ni3MnCuAl steel is processed by the shot peening with different intensities. After shot peening, the metallographic structure of 10Ni3MnCuAl steel and the micro-structure on the surface layer are analyzed. The micro-hardness in the shot peening affected layer and the residual pressure stress are surveyed. The changes of surface quality, such as micro-hardness, metallographic structure and residual stress caused by shot peening are investigated. The result shows that shot peening can significantly improve surface quality and fatigue life of 10Ni3MnCuAl steel. The over peening effect is produced when the shot peening intensity is high, and it leads to the decrease of the fatigue life. When the optimal arc high value of shot peening is 0. 40 mm in experiments, the best surface quality is obtained and the depth of the residual stress in the precipitation-hardening layer reaches 450μm.
文摘The signal integrity problem in 0.18μm CMOS technology is analyzed from simulation.Several rules in this phenomenon are found by analyzing the crosstalk delay and noise,which are helpful for the future circuit design.
文摘The device is used for the test on the fuze detonating time according to the initial velocity of the projectile and the altitude and speed of enemy aircraft flight. For the special requirements of the high-speed signal acquisition in the process, the characteristics of the measured signal are analyzed. The system is investigated in chip selection, signal transmission, signal processing, signal storage, post-production PCB design, etc. The appropriate measures and solutions which affect the integrity and accuracy of the signal in each process are proposed. The rules for the layout of the device and wiring are made. The result show that the measurement values are accurate without loss of data.
文摘The conception of multilevel security (MLS) is commonly used in the study of data model for secure database. But there are some limitations in the basic MLS model, such as inference channels. The availability and data integrity of the system are seriously constrained by it′s 'No Read Up, No Write Down' property in the basic MLS model. In order to eliminate the covert channels, the polyinstantiation and the cover story are used in the new data model. The read and write rules have been redefined for improving the agility and usability of the system based on the MLS model. All the methods in the improved data model make the system more secure, agile and usable.
文摘This paper presents a new method to seek the conserved quantity from a Lie symmetry without using either Lagrangians or Hamiltonians for nonholonomic systems. The differential equations of motion of the systems are established. The definition of the Lie symmetrical transformations of the systems is given, which only depends upon the infinitesimal transformations of groups for the generalized coordinates. The conserved quantity is directly constructed in terms of the Lie symmetry of the systems. The condition under which the Lie symmetry can lead to the conserved quantity and the form of the conserved quantity are obtained. Finally, an example is given to illustrate the application of the result.
基金Supported by the Eleventh Five-year Development Planning Project for Instructional Science in Hubei Province (2006B131)~~
文摘MATLAB software and optimal complete subgraph algorithm were used to extract and reveal the microsatellite distribution features in the complete genomes of the tobacco vein clearing virus （NC-003 378.1） from the NCBI database.The results showed that the repetitions number and their location of the N-base group has been extracted and displayed.The largest repetitions of N-base group in the complete genomes of the tobacco vein clearing virus was decreased as the exponential function with the increasing of N.The method used in this study could be applied to the extraction and revealing of the microsatellite distribution features in the complete genomes of other viruses,thereby provided a basis for the research of the structure and the law of function,inheritance and variation by the using of the microsatellite distribution features.
文摘The purpose of this work relates to study on the characteristics of ultra thin gate oxide (2 5nm thickness) and the effect of metal Al,Zr,and Ta contamination on GOI.The controlled metallic contamination experiments are carried out by depositing a few ppm contaminated metal and low pH solutions on the wafers.The maximum metal surface concentration is controlled at about 10 12 cm -2 level in order to simulate metal contamination during ultra clean processing.A ramped current stress for intrinsic charge to breakdown measurements with gate injection mode is used to examine the characteristics of these ultra thin gate oxides and the effect of metal contamination on GOI.It is the first time to investigate the influence of metal Zr and Ta contamination on 2 5nm ultra thin gate oxide.It is demonstrated that there is little effect of Al contamination on GOI,while Zr contamination is the most detrimental to GOI,and early breakdown has happened to wafers contaminated by Ta.
基金Project(51021004) supported by Innovative Research Groups of the National Natural Science Foundation of ChinaProject(40776055) supported by the National Natural Science Foundation of china+1 种基金Project(1002) supported by State Key Laboratory of Ocean Engineering Foundation, ChinaProject(NCET 11 0370) supported by the Program for New Century Excellent Talents in Universities of China
文摘In-service hydrocarbons must be transported at high temperature and high pressure to ease the flow and prevent the solidification of the wax fraction. The pipeline containing hot oil will expand longitudinally due to the rise in temperature. If such expansion is resisted, for example by frictional effects over a kilometer or so of pipeline, compressive axial stress will be built up in the pipe-wall. The compressive forces are often so large that they induce vertical buckling of buffed pipelines, which can jeopardize the structural integrity of the pipeline. A typical initial imperfection named continuous support mode of submarine pipeline was studied. Based on this type of initial imperfection, the analytical solution of vertical thermal buckling was introduced and an elastic-plasticity finite element analysis （FEA） was developed. Both the analytical and the finite element methodology were applied to analyze a practice in Bohai Gulf, China. The analyzing results show that upheaval buckling is most likely to build up from the initial imperfection of the pipeline and the buckling temperature depends on the amplitude of initial imperfection. With the same amplitude of initial imperfection, the triggering temperature difference of upheaval buckling increases with covered depth of the pipeline, the soil strength and the friction between the pipeline and subsoil.
文摘Neonatal gonocytes are precursors of spermatogonial stem cells. Preserving their integrity by elimination of damaged germ cells may be crucial to avoid the transmission of genetic alterations to progeny. Using 7-irradiation, we investigated by immunohistochemistry, flow cytometry and real-time PCR components of the death machinery in neonatal gonocytes. Their death was correlated with caspase 3 activation but not with AIF translocation into the nu- cleus. The in vivo contribution of both the extrinsic and the intrinsic pathways was then investigated. We focused on the roles of TRAIL/Death Receptor 5 （DR5） and PUMA. Our results were validated using knockout mice. Whereas DR5 expression was upregulated at the cell surface after radiation, caspase 8 was not activated. However, we detected caspase 9 cleavage associated with cytochrome c release. In mice deficient for PUMA, radiation-induced gonocyte apoptosis was reduced, whereas invalidation of TRAIL had no effect. Overall, our results show that genotoxic stressinduced apoptosis of gonocytes is caspase-dependent and involves almost exclusively the intrinsic pathway. Furthermore, PUMA plays a critical role in the maintenance of genomic integrity of spermatogonial stem cell precursors.
基金Project(41672121)supported by the National Natural Science Foundation of ChinaProject(D1438)supported by the China Geological Survey
文摘Maintaining caprock integrity is prerequisite for hydrocarbon accumulation. And gypsolyte caprock integrity is mainly affected by fracturing. Composition, damage behavior and mechanical strength of Paleocene Artashi Formation gypsolyte rock that seals significant petroleum in the Kashi Sag of Tarim Basin had been revealed via X-ray diffraction and triaxial compression test. The results indicate the Artashi Formation can be lithologically divided into the lower and upper lithologic members. The lower member comprises gypsum as the dominant mineral, and the cohesion and friction coefficient are 8 MPa and 0.315, respectively. Similarly, the upper lithologic member consists mainly of anhydrite at the cohesion and coefficient of internal friction values of 18 MPa and 0.296. Given that the failure criterion and brittle-ductile transition factors during burial, the sealing integrity of Artashi Formation can be quantized for seven different stages. The reservoirs at the bottom of Artashi Formation caprock buried from 2285 m to 3301 m are expected to be the most favorable exploration target in the Kashi Sag.
基金Projects(2004G028, 2004G016) supported by the Science and Technology Development Program of Railways Department, China
文摘Wuhan Tianxingzhou Changjiang (WTC) Bridge and Nanjing Dashengguan Changjiang (NDC) Bridge are two super high-speed railway 3-trusses composite bridges. This is the first time of using three trusses in such large bridges in the world. These two types of railway floor systems of the two bridges have never been used in China before. The problem how to conform the deformations and stress levels of the railway floor system of WTC Bridge was studied. After finite element analysis and comparison,the plan of arranging one expansion stringer every two panels in railway floor system were proposed and good effect was obtained. Because of the application of three trusses,the allocation of the loads acted on the deck in three trusses is different and varies in different places of NDC Bridge. This problem was studied by model experiment and 3D finite element analysis. The results of 3D FEM analysis coincide with the model test results. The allocation rule of the loads acting on the deck in three trusses was presented. Because of the application of monolithic decks,the stiffness and structural integrity of NDC Bridge are high.
文摘Two new types of conserved quantities deduced by Noether-Mei symmetry of nonholonomic mechanicalsystem are studied.The definition and criterion of Noether-Mei symmetry for the system are given.A coordinationfunction is introduced,and the conditions under which the Noether-Mei symmetry leads to the two types of conservedquantities and the forms of the two types of conserved quantities are obtained.An illustrative example is given.Thecoordination function can be selected according to the demand for finding the gauge function,and the choice of thecoordination function has multiformity,so more conserved quantities deduced from Noether-Mei symmetry of mechanicalsystem can be obtained.
基金partially supported by the Fundamental Research Funds for the Central Universities of China under Grant No.2015JBM034the China Scholarship Council Funds under File No.201407095023
文摘How to keep cloud data intact and available to users is a problem to be solved. Authenticated skip list is an important data structure used in cloud data integrity verification. How to get the membership proof of the element in authenticated skip list efficiently is an important part of authentication. Kaouthar Blibech and Alban Gabillon proposed a head proof and a tail proof algorithms for the membership proof of elements in the authenticated skip list. However, the proposed algorithms are uncorrelated each other and need plateau function. We propose a new algorithm for computing the membership proof for elements in the authenticated skip list by using two stacks, one is for storing traversal chain of leaf node, the other is for storing authentication path for the leaf. The proposed algorithm is simple and effective without needing plateau function. It can also be applicable for other similar binary hash trees.
