聚焦“变数”“定数”建构生成型语文课堂

本文论述生成型语文课堂的构建,提出语文教师要在学生的错误中引导其进入深度探究;在学生思维混乱时引导其进行梳理整合;化繁为简,引导学生抓住主干问题进行分析;高屋建瓴,促使学生将学习上升到探究学科意识的高度,这样才能在高中语文课堂中达到理想的教学效果。

Global stability coefficient of large underground caverns under static loading and earthquake wave condition

Underground energy and resource development,deep underground energy storage and other projects involve the global stability of multiple interconnected cavern groups under internal and external dynamic disturbances.An evaluation method of the global stability coefficient of underground caverns based on static overload and dynamic overload was proposed.Firstly,the global failure criterion for caverns was defined based on its band connection of plastic-strain between multi-caverns.Then,overloading calculation of the boundary geostress and seismic intensity on the caverns model was carried out,and the critical unstable state of multi-caverns can be identified,if the plastic-strain band appeared between caverns during these overloading processes.Thus,the global stability coefficient for the multi-caverns under static loading and earthquake was obtained based on the corresponding overloading coefficient.Practical analysis for the Yingliangbao(YLB)hydraulic caverns indicated that this method can not only effectively obtain the global stability coefficient of caverns under static and dynamic earthquake conditions,but also identify the caverns’high-risk zone of local instability through localized plastic strain of surrounding rock.This study can provide some reference for the layout design and seismic optimization of underground cavern group.

Omega results for coefficients of Rankin-Selberg L-functions over sparse sequences

Ω results involving the coefficients of automorphic L-functions are important research object in analytic number theory.Let f be a primitive holomorphic cusp form.Denote by λ_(f×f)(n) the nth Fourier coefficient of Rankin-Selberg L-function L(f×f,s).This paper combines Kühleitner and Nowak′s Omega theorem and the analytic properties of Rankin-Selberg L-functions to study Omega results for coefficients of Rankin-Selberg L-functions over sparse sequences,and establishes the asymptotic formula for Σ_(n≤x)λf×f(n^(m))(m=2,3).

Evaluation Test Research of DR Inspection System for Circumferential Welds in Long Distance Pipeline

Digital radiographic(DR)testing equipment has been widely promoted and applied in the inspection of circumferential welds in oil and gas pipelines.In order to establish a comprehensive quality control system for digital radiographic testing and fully evaluate the integrated system inspection ability of equipment,personnel,and processes,a scientific and standardized evaluation method to the system is very necessary.Here investigates the precedents of relevant non-destructive testing evaluation methods at home and abroad,considers the testing characteristics of DR equipment,develops a complete set of DR testing system evaluation procedures.It deeply studies the adaptability methods of program processes from defect production to slicing processing and data statistical calculation for digital radiographic testing evaluation.To check the repeatability and reliability of the detectable system,five process welds with 200 real metallographic defects were fabricated in the laboratory.From the detected results,the DR system has good repeatability in image quality,and the detectable defect size reaches 0.85 mm under achieving 90%detection probability at a confidence level of 95%,the error of detected defect length is±2 mm,and the error of detected defect localization is±5 mm.The qualitative and quantitative detection of defects are accurate and reliable.The test further confirmed the reliable detection ability of the DR detection system,and fully validated the scientific and practical evaluation method designed.The research on the evaluation test method can serve as an important link in the quality control system for the on-site application of digital ray equipment in long-distance pipelines.The designed program,test,and evaluation content can serve as an important basis for the formulation of relevant specifications or standards.

The influences of canopy temperature measuring on the derived crop water stress index

Crop water stress index(CWSI)is widely used for efficient irrigation management.Precise canopy temperature(T_(c))measurement is necessary to derive a reliable CWSI.The objective of this research was to investigate the influences of atmospheric conditions,settled height,view angle of infrared thermography,and investigating time of temperature measuring on the performance of the CWSI.Three irrigation treatments were used to create different soil water conditions during the 2020-2021 and 2021-2022 winter wheat-growing seasons.The CWSI was calculated using the CWSI-E(an empirical approach)and CWSI-T(a theoretical approach)based on the T_(c).Weather conditions were recorded continuously throughout the experimental period.The results showed that atmospheric conditions influenced the estimation of the CWSI;when the vapor pressure deficit(VPD)was>2000 Pa,the estimated CWSI was related to soil water conditions.The height of the installed infrared thermograph influenced the T_(c)values,and the differences among the T_(c)values measured at height of 3,5,and 10 m was smaller in the afternoon than in the morning.However,the lens of the thermometer facing south recorded a higher T_(c)than those facing east or north,especially at a low height,indicating that the direction of the thermometer had a significant influence on T_(c).There was a large variation in CWSI derived at different times of the day,and the midday measurements(12:00-15:00)were the most reliable for estimating CWSI.Negative linear relationships were found between the transpiration rate and CWSI-E(R^(2)of 0.3646-0.5725)and CWSI-T(R^(2)of 0.5407-0.7213).The relations between fraction of available soil water(FASW)with CWSI-T was higher than that with CWSI-E,indicating CWSI-T was more accurate for predicting crop water status.In addition,The R^(2)between CWSI-T and FASW at 14:00 was higher than that at other times,indicating that 14:00 was the optimal time for using the CWSI for crop water status monitoring.Relative higher yield of winter wheat was obtained with average seasonal values of CWSI-E and CWSI-T around 0.23 and 0.25-0.26,respectively.The CWSI-E values were more easily influenced by meteorological factors and the timing of the measurements,and using the theoretical approach to derive the CWSI was recommended for precise irrigation water management.

Censored Composite Conditional Quantile Screening for High-Dimensional Survival Data

In this paper,we introduce the censored composite conditional quantile coefficient(cC-CQC)to rank the relative importance of each predictor in high-dimensional censored regression.The cCCQC takes advantage of all useful information across quantiles and can detect nonlinear effects including interactions and heterogeneity,effectively.Furthermore,the proposed screening method based on cCCQC is robust to the existence of outliers and enjoys the sure screening property.Simulation results demonstrate that the proposed method performs competitively on survival datasets of high-dimensional predictors,particularly when the variables are highly correlated.

Influence of Gradient on Stability of Soil Slope Containing Roots

Abundant herbaceous and shrub roots play an important role in preventing water and soil erosion and increasing shallow slope stability. In order to make a quantitative analysis on the contribution of root system to slope stability under dif- ferent slope gradient, an unconsolidated and undrained triaxial compression test was conducted to measure the shear strengths of soil and root-soil composite in the two slopes in eastern Qinghai Province. In addition, under the protection of plant roots, the effect of gradient on stability of soil slope was investigated by limit equilibrium method. The results showed that the stability coefficient of soil slope planted with two kinds of brush was decreased with the increase in slope gradient, and the sta- bility coefficient increment of soil slope containing Atriplex canescens roots was higher than that containing Caragana korshinskii roots. When the slope gradient ranged from 25° to 50°, the stability coefficient of soil slope planted with Atriplex canescens or Caragana korshinskii ranged from 0.80 to 1.38. However, when the slope gradient exceeded 55°, the increment of stability coefficient of soil slope became small.

Path Analysis on the Meteorological Factors Impacting Soil Respiration Rate of Wheat Field

[Objective]The experiment aimed to study the effects of meteorological factors under different weather conditions on soil respiration. [ Method] The path analysis was used to analyze meteorological factors which influenced soil respiration of wheat field under different weather condition and at jointing stage. [ Result] In sunny day, the correlations between ground temperature at 5 cm, solar radiation, air relative humidity, air temperature and soil respiration were all at significant level while solar radiation and ground temperature at 5 cm were the major factors which influenced soil respiration. In cloudy day, solar radiation was a major factor which influenced soil respiration.[ Conclusion] The soil respiration and surplus path coefficient in sunny day were all higher than these in cloudy day, which demonstrated that except influenced by ground temperature, air temperature, solar radiation and air relative humidity, the soil respiration was also influenced by other factors especially biological factor.

An Entropy-based Index for Fine-scale Mapping of Disease Genes

By comparing the entropy and the conditional entropy in a marker, an entropy-based index has been presented for fine-scale linkage disequilibrium gene mapping using high-density marker maps for human disease genes. The index can quantify the level of linkage disequilibrium （LD） between the marker and the disease susceptibility locus （DSL） of genes. The advantage of using the index is attributed to the fact that it does not depend on marker allele frequencies across loci. Moreover, it is parallel to Hardy-Weinberg disequilibrium （HWD） measure for DSL fine mapping. Through various simulations, the fine mapping perform- ances of the proposed entropy-based index was extensively investigated under various genetic parameters. The results show that the index presented is both robust and powerful for DSL mapping in genes.

Temperature field calculation on cold crucible continuous melting and directional solidifying Ti50Al alloys

In order to optimize technological parameters and realize directional solidification,temperature fields of cold crucible continuous melting and directional solidifying Ti50Al（mole fraction,%） at different parameters were calculated.Continuous casting of the model is achieved by distinguishing the moving unit at different positions.The calculation results show that the feeding rod is entirely melted at 200 s,the melt of feeding rod has some superheat degree at 300 s under the conditions of 52 kW and 3.0 mm/min.Both the superheat degree and the molten zone of the feeding rod reduce,the solid-liquid interface becomes concave with increasing velocity from 1.2 mm/min to 6.0 mm/min when the power is 52 kW,and the outside layer of the rod cannot be melted at the velocity of 6.0 mm/min.Both superheat degree and the molten zone of the feeding rod increase,the solid-liquid interface descends and becomes concave with increasing power from 48 to 58 kW at velocity of 3.0 mm/min,and the rod cannot be melted entirely when the power is 48 kW.Cold crucible continuous melting and directional solidification of TiAl alloys will be achieved successfully when the pulling velocity and the power are matched appropriately.

Solvability Condition for Robust Stabilization Problem of Control Systems with Parameter Uncertainties

Aim The solvability condition for robust stabilization problem associated with a plant family P(s,δ) having parameter uncertainty δ was considered. Methods Using Youla parameterization of the stabilizers this problem was transformed into a strong stabilization problem associated with a related plant family G (s, δ). Results A necessary solvability condition was established in terms of the parity interlacing property of each element in G(s,δ). Another apparently necessary solvability condition is that every element in P(s,δ) must be stabilizable. Conclusion The two conditions will be compared with each other and it will be shown that every element in G(s,δ) possesses parity interlacing property if P(s,δ) is stabilizable.

Mathematical Definitions of Operators for Cartographic Generalization

This paper puts forword 11 cartographic generalization operator models and introduces their mathematical definitions,and thus a precise mathematical form and quantitative description has been given to these formerly limited qualitative concepts.The meaning of mathematical definition of operators for cartographic generalization and the application prospect in computer_aided cartography (CAC) is stated.ract The Jurassic strata in Jingyan of Sichuan containing the Mamenchinsaurus fauna are dealt with and divided in this paper. The Mamenchisaurus fossils contained there are compared in morphological features and stratigraphically with other types of the genus on by one. The comprehensive analysis show that the Mamenchisaurus fauna of Jingyan appeared in the early Late Jurassic and is primitive in morphology. The results of the morphological identification and stratigraphical study agree with each other. Their evolutionary processes in different apoches of the Late Jurassic also made clear. Key words Jingyan, Sichuan, Mamenchisaurus Fauna, stratigraphy, evolution

Characterization and Identification of a Novel Mutant fon(t) on Floral Organ Number and Floral Organ Identity in Rice

The floral-organ-number mutant fon（t） was firstly discovered in the progeny of a cross between a diploid （Chunjiang 683） and a haploid （SARⅣ/-620-A） rice cultivar. The fon（t） mutant showed normal vegetative development and produced normal inflorescence structures. Difference between the mutant and the wild type was observed when the stamen primordia began to form. The mature flowers offon（t） mutant showed open-hull phenotypes, which resulted in the exposure of stamens and stigmas. Normally, a single fon（t） floret consisted of six to nine stamens and one or two pistils. In addition, stamen/pistil-like structures and bulged tissues near ovaries were also observed in a few fon（t） florets. But homeotic transformation of lodicules into palea/lemma-like organs was observed almost in all the open-hull florets. The phenotypes offon（t） flowers also suggested thatfon（t） gene might affect flower organ identity in the inner whorls. Genetic analysis showed that thefon（t） mutant was controlled by a single recessive gene.

An Entropy-based Index for Fine-scale Mapping of QTL

By comparing the entropy and conditional entropy in a marker, an entropy-based index for fine-scale linkage-disequilibrium gene mapping is presented using high-density marker maps in extreme samples for quantitative trait. The entropy-based index is the function of LD between the marker and the traitlocus and does not depend on marker allele frequencies across the loci. It is parallel to Hardy-Weinberg disequilibrium （HWD） measure for QTL fine mapping, but its power of fine mapping QTL is higher than that of HWD measure. Through simulations, the fine mapping performance of this entropy-based index is investigated extensively under various genetic parameters. The results show that the indices presented here are both robust and powerful.

Bus transit travel time reliability evaluation based on automatic vehicle location data

In order to provide important parameters for schedule designing, decision-making bases for transit operation management and references for passengers traveling by bus, bus transit travel time reliability is analyzed and evaluated based on automatic vehicle location （AVL） data. Based on the statistical analysis of the bus transit travel time, six indices including the coefficient of variance, the width of travel time distribution, the mean commercial speed, the congestion frequency, the planning time index and the buffer time index are proposed. Moreover, a framework for evaluating bus transit travel time reliability is constructed. Finally, a case study on a certain bus route in Suzhou is conducted. Results show that the proposed evaluation index system is simple and intuitive, and it can effectively reflect the efficiency and stability of bus operations. And a distinguishing feature of bus transit travel time reliability is the temporal pattern. It varies across different time periods.

The comprehensive measure model for urban traffic congestion based on value function

According to the distribution characteristics of traffic congestion in time and space, a measure index system of urban traffic congestion is set up based on the spatial and temporal distribution. Based on the analysis of the main characteristics of traffic congestion and the generation process of traffic congestion, the measure model for urban traffic congestion is constructed by the value function. Moreover, based on the measure values of traffic congestion in urban road networks with defined different levels, a method to prevent and control traffic congestion is designed. The application results confirm that the proposed method is feasible in comprehensive measures for urban traffic congestion and they are consistent with the results of other methods. The measuring results can therefore reflect the actual situation. The comprehensive measure model is scientific and the process is simple, and it has wide application prospects and practical value.

Exponential stability criteria on neural networks with continuously distributed delays

The exponential stability of a class of neural networks with continuously distributed delays is investigated by employing a novel Lyapunov-Krasovskii functional. Through introducing some free-weighting matrices and the equivalent descriptor form, a delay-dependent stability criterion is established for the addressed systems. The condition is expressed in terms of a linear matrix inequality （LMI）, and it can be checked by resorting to the LMI in the Matlab toolbox. In addition, the proposed stability criteria do not require the monotonicity of the activation functions and the derivative of a time-varying delay being less than 1, which generalize and improve earlier methods. Finally, numerical examples are given to show the effectiveness of the obtained methods.

The Monotonicity Problems for Generalized Inverses of Matrices in H (n, ≥)

On the basis of the paoers[3—7],this paper study the monotonicity problems for the positive semidefinite generalized inverses of the positive semidefinite self-conjugate matrices of quaternions in the Lowner partial order,give the explicit formulations of the monotonicity solution sets A{1;≥,T_1;≤B^(1)}and B{1;≥,T_2≥A^(1)}for the(1)-inverse,and two results of the monotonicity charac teriaztion for the(1,2)-inverse.

Determination of Stability Constants of Cadmium-Glycine Complexes by a Unified Treatment for Potentiometric and Polarographic Data

The cadmium（Ⅱ）-glycine system was studied by the two experimental techniques, ion sensitive electrode （ISE） and differential pulse polarography （DPP）, and the experimental data obtained were used by a unified mathematical treatment to calculate the complex stability constants. The combination of the two techniques is of many advantages as ISE can be performed at low [LT]：[MT] ratios and significantly higher [MT], whereas DPP could be used well at large [LT]：[MT] ratios and much smaller [MT]. This makes it possible to study a metal-ligand system in a relatively broader range of experimental conditions that, in turn, provides more information about the metakligand system of interest. Applying the unified mathematical treatment to the cadmium-glycine system, two new complexes MHL and ML2（OH） as well as three complexes ML, ML2 and ML3, reported in literatures, could be modeled and all their stability constants have been refined.