“常理与常形”——通过苏轼绘画理论看传统中国画中的真实性

苏轼对传统中国画的影响举足轻重,他对绘画有很多见解,比如倡导诗画一律、作画要抒发自己的真实情感等,其中对于绘画“常理与常形”的论述更是指明了传统中国画中的真实性。文章分析“常理”与“常形”的关系,探讨艺术家对事物内在规律的表现对传统中国画真实性的影响。

3D electrical resistivity inversion using prior spatial shape constraints

To minimize the number of solutions in 3D resistivity inversion, an inherent problem in inversion, the amount of data considered have to be large and prior constraints need to be applied. Geological and geophysical data regarding the extent of a geological anomaly are important prior information. We propose the use of shape constraints in 3D electrical resistivity inversion, Three weighted orthogonal vectors （a normal and two tangent vectors） were used to control the resistivity differences at the boundaries of the anomaly. The spatial shape of the anomaly and the constraints on the boundaries of the anomaly are thus established. We incorporated the spatial shape constraints in the objective function of the 3D resistivity inversion and constructed the 3D resistivity inversion equation with spatial shape constraints. Subsequently, we used numerical modeling based on prior spatial shape data to constrain the direction vectors and weights of the 3D resistivity inversion. We established a reasonable range between the direction vectors and weights, and verified the feasibility and effectiveness of using spatial shape prior constraints in reducing excessive structures and the number of solutions. We applied the prior spatially shape-constrained inversion method to locate the aquifer at the Guangzhou subway. The spatial shape constraints were taken from ground penetrating radar data. The inversion results for the location and shape of the aquifer agree well with drilling data, and the number of inversion solutions is significantly reduced.

Three-dimensional Spaces of Quasi-constant Curvature

In this paper some properties of three-dimensional spaces of quasi-constant curvature different from those of cases when dimension n≥4 are proved. In particular, two classes of non-conformally flat solutions of them are constructed. In physics,a three-dimensional space of quasi-constant curvature appears as the space-like hypersurface of the rotation-free cosmological model of type D for the fluids with heat flow in General Relativity.

Answering a century old riddle: brachydactyly type Al

In 1903, Farabee analyzed the heredity of the human digital malformation, brachydactyly, the first recorded disorder of the autosomal dominant Mendelian trait. In 1951, Bell classified this type of brachydactyly as type A1 (BDA1). Over 100 cases from different ethnic groups have so far been reported. However, the real breakthrough in identifying the cause of BDA1 has only taken place in the last few years with the progress of the mapping and identification of one of the genes responsible for this disorder, thus providing an answer for a century old riddle. In this article, we attempt to review the current state of knowledge on the genetic features of BDA1 with its century-old history and signalling pathway of IHH, and also discuss genotype-phenotype correlation not only of BDA1, but also of all types of brachydactyly.

Transformation of Flue-Gas-Desulfurization Gypsum to α-Hemihydrated Gypsum in Salt Solution at Atmospheric Pressure

Direct phase transformation of flue gas desulfurization gypsum in hot salt solution at atmospheric pres-sure was investigated.The effects of temperature,salt species,salt concentration,solids content,pH and modifier were examined.The crystals obtained under different conditions and solubility of calcium sulfate in contact with solid gypsum were also determined.α-Calcium sulfate hemihydrate crystals of stubby columnar shape and regular pentahedral sides were obtained under the following conditions：salt concentration 20%-30%,operation tempera-ture 95-100 °C,solids mass content in the slurry 10%-30% and neutral pH.Thermodynamic analysis revealed that phase transformation of calcium sulfate dihydrate to α-calcium sulfate hemihydrate occurs because of the difference in solubilities between the two solid gypsum phases in this system.

Comparison of Morphological Microstructure of Vitrified and Normal Shoots of Aronia melanocarpa Elloit

The Aronia melanocarpa El oit was used as test material. The microstruc-ture of normal and vitrified shoots and the characteristics of their stomas on leaf surface were compared by paraffin section and leaf epidermis-tearing method. The results showed the palisade tissue of Aronia melanocarpa El oit consists of 2-3 lay-ers of cells. The stomas on lower epidermis cave in, and are smal and dense. There are abundant vessels and sieve tubes in stems. ln contrast, the main veins of vitrified shoots are unobvious, messy and irregular. The boundary between pal-isade tissue and spongy tissue is not obvious. The stomas open circularly and bigly. The stems are swel ing and thick, but the pith parenchyma cells are broken.

Second Order Parallel Tensors on Quasi-constant Curvature Manifolds

The author establishes in this paper the following results: (1) In a quasiconstant curvature manifold M a parallel tensor of type is constant multiple of the metric tensor. (2) On a quasi_constant curvature manifold there is no nonzero parallel 2_form. Unless the Ricci principal curvature corresponding to the generator of M is equal to zero.

The Formation of Precipitation Anomaly Patterns during the Developing and Decaying Phases of ENSO

This study proposes a new explanation for the formation of precipitation anomaly patterns in the boreal summer during the E1 Nifio-Southem Oscillation （ENSO） developing and decaying phases. During the boreal sum- mer June-July-August （JJA） （0） of the E1 Nino （La Nina） developing phase, the upper level （300-100 hPa） positive potential temperature anomalies resemble a Ma- tsuno-Gill-type response to central Pacific heating （cool- ing）, and the lower level （1000-850 hPa） potential tem- perature anomalies are consistent with local SST anoma- lies. During the boreal summer JJA（1） of the E1 Nifio （La Nifia） decaying phase, the upper level potential tempera- ture warms over the entire tropical zone and resembles a Matsuno-Gill-type response to Indian Ocean heating （cooling）, and the lower level potential temperature anomalies follow local SST anomalies. The vertical heterogeneity of potential temperature anomalies influences the atmospheric stability, which in turn influences the precipitation anomaly pattern. The results of numerical experiments confirm our observations.

Changes of hydrochemical composition and heavy metals concentration in shallow groundwater from karst hilly areas in Guiyang region,China

The quality changes of shallow groundwater from karst hilly areas in Guiyang region of China impacted by the urbanization were investigated. The results show that the major ions in shallow groundwater from the karst hilly areas are mainly composed of HCO3^-, SO4^2-, Ca^2＋ and Mg^2＋, and the concentrations scopes of NO3^-, Cl^-, K^＋ and Na^＋ of the groundwater in agricultural, residential and industrial areas are 4.5-9.6, 2.8-7.1, 3.9-6.3 and 2.5-4.9 times higher than those in the forest areas, respectively. The concentrations of As, Pb and Cd of shallow groundwater in the industrial areas are also significantly enhanced, followed by those in the residential areas and the agricultural areas. The concentrations of NO3^-, SO4^2- , As, Pb and Cd of the groundwater in the industrial areas and those of NO3^- , SO4^2-, As and Cd of shallow groundwater in the residential areas reach grade Ⅲ of the Groundwater Quality Standard of China （GB/T 14848-93）, while the concentration of NO3^- in the groundwater from the industrial areas exceeds grade V. With the process of urbanization, NO3^- is the key factor to influence the groundwater quality in karst hilly areas, followed by SO4^2-, As, Pb and Cd.

Mineralization-related geochemical anomalies derived from stream sediment geochemical data using multifractal analysis in Pangxidong area of Qinzhou-Hangzhou tectonic joint belt, Guangdong Province, China

Distinguishing geochemical anomalies from background is a basic task in exploratory geochemistry. The derivation of geochemical anomalies from stream sediment geochemical data and the decomposition of these anomalies into their component patterns were described. A set of stream sediment geochemical data was obtained for 1 880 km 2 of the Pangxidong area, which is in the southern part of the recently recognized Qinzhou-Hangzhou joint tectonic belt. This belt crosses southern China and tends to the northwest (NE) direction. The total number of collected samples was 7 236, and the concentrations of Ag, Au, Cu, As, Pb and Zn were measured for each sample. The spatial combination distribution law of geochemical elements and principal component analysis (PCA) were used to construct combination models for the identification of combinations of geochemical anomalies. Spectrum-area (S-A) fractal modeling was used to strengthen weak anomalies and separate them from the background. Composite anomaly modeling was combined with fractal filtering techniques to process and analyze the geochemical data. The raster maps of Au, Ag, Cu, As, Pb and Zn were obtained by the multifractal inverse distance weighted (MIDW) method. PCA was used to combine the Au, Ag, Cu, As, Pb, and Zn concentration values. The S-A fractal method was used to decompose the first component pattern achieved by the PCA. The results show that combination anomalies from a combination of variables coincide with the known mineralization of the study area. Although the combination anomalies cannot reflect local anomalies closely enough, high-anomaly areas indicate good sites for further exploration for unknown deposits. On this basis, anomaly and background separation from combination anomalies using fractal filtering techniques can provide guidance for later work.

Simulation of strain induced abnormal grain growth in aluminum alloy by coupling crystal plasticity and phase field methods

A mesoscale modeling methodology is proposed to predict the strain induced abnormal grain growth in the annealing process of deformed aluminum alloys. Firstly, crystal plasticity finite element(CPFE) analysis is performed to calculate dislocation density and stored deformation energy distribution during the plastic deformation. A modified phase field(PF) model is then established by extending the continuum field method to consider both stored energy and local interface curvature as driving forces of grain boundary migration. An interpolation mapping approach is adopted to transfer the stored energy distribution from CPFE to PF efficiently. This modified PF model is implemented to a hypothetical bicrystal firstly for verification and then the coupled CPFE-PF framework is further applied to simulating the 2D synthetic polycrystalline microstructure evolution in annealing process of deformed AA3102 aluminum alloy.Results show that the nuclei with low stored energy embedded within deformed matrix tend to grow up, and abnormal large grains occur when the deformation is close to the critical plastic strain, attributing to the limited number of recrystallized nuclei and inhomogeneity of the stored energy.

Simulation by Dislocation Model and Anomaly Property Determination of Huge Leveling Deformation at Linfen Seismic Station

In this study,under the assumption that the two huge leveling deformation anomalies at Linfen seismic station were caused by the Luoyunshan fault( Tumen-Yuli section)movement, we computed the vertical deformation field distribution based on the rectangular fault dislocation model and measured the ground deformation field of the study area using D-InS AR technology. The results are as follows:( 1) Theoretically,the ground vertical deformation field caused by fault movement could be within the elliptical deformation area with the long axis parallel to the fault strike. The largest deformation region is located in the center of the area in the hanging wall of the fault,and the deformation gradually decreases to zero toward the periphery; the impact range induced by the two deformations is respectively as follows: The long axes are about 18 km and26km,the short axes are about 12 km and 17 km and the obvious deformation amplitude is about 1- 3mm and 4- 14 mm.( 2) The measured deformation field by D-InS AR shows that there is no continuous deformation area consistent with the fault strike,and only the presence of land subsidence possibly caused by groundwater excessive exploitation,with the deformation amplitude about 10- 12 mm and 1- 5mm.( 3) The measured deformation field is not consistent with the theoretical result on deformation area and amplitude,which indicates that the fault movement is not the main cause of Linfen huge leveling deformation,but may rather be because of local deformation of the soil layers in the hanging wall of the fault.( 4) By combining the fault dislocation model simulation with the D-InS AR technology measurement,we can determine effectively the nature of the anomalyof the huge cross-fault leveling deformation,thus provide scientific basis for verification of significant leveling anomalies.

Evolving management of metaplasia and dysplasia in Barrett's epithelium

Oesophageal cancer affects more than 450000 people worldwide and despite continued medical advancements the incidence of oesophageal cancer is increasing. Oesophageal cancer has a 5 year survival of 15%-25% and now globally attempts are made to more aggressively diagnose and treat Barrett's oesophagus the known precursor to invasive disease. Currently diagnosis the of Barrett's oesophagus is predominantly made after endoscopic visualisation and histopathological confirmation. Minimally invasive techniques are being developed to improve the viability of screening programs. The management of Barrett's oesophagus can vary greatly dependent on the presence and severity of dysplasia. There is no consensus between the major international medical societies to determine and agreed surveillance and intervention pathway. In this review we analysed the current literature to demonstrate the evolving management of metaplasia and dysplasia in Barrett's epithelium.

Effect of chitosan on tobacco mosaic virus(TMV) accumulation, hydrolase activity, and morphological abnormalities of the viral particles in leaves of N. tabacum L. cv. Samsun

The effect of chitosan on the development of infection caused by Tobacco mosaic virus(TMV) in leaves of Nicotiana tabacum L. cv. Samsun has been studied. It was shown that the infectivity and viral coat protein content in leaves inoculated with a mixture of TMV(2 μg/mL) and chitosan(1 mg/mL) were lower in the early period of infection(3 days after inoculation), by 63% and 66% respectively, than in leaves inoculated with TMV only. Treatment of leaves with chitosan 24 h before inoculation with TMV also caused the antiviral effects, but these were less apparent than when the virus and polysaccharide were applied simultaneously. The inhibitory effects of the agent decreased as the infection progressed. Inoculation of leaves with TMV together with chitosan considerably enhanced the activity of hydrolases(proteases, RNases) in the leaves, in comparison with leaves inoculated with TMV alone. Electron microscope assays of phosphotungstic acid(PTA)-stained suspensions from infected tobacco leaves showed that, in addition to the normal TMV particles(18 nm in diameter, 300 nm long), these suspensions contained abnormal(swollen, "thin" and "short") virions. The highest number of abnormal virions was found in suspensions from leaves inoculated with a mixture of TMV and chitosan. Immuno-electron microscopy showed that "thin" virus particles, in contrast to the particles of normal diameter, lost the ability to bind to specific antiserum. It seems that the chitosan-induced activation of hydrolases stimulates the intracellular degradation of TMV particles and hence hydrolase activation may be considered to be one of the polysaccharide-mediated cellular defense mechanisms that limit virus accumulation in cells.

Degradation of joint surface morphology, shear behavior and closure characteristics during cyclic loading

In order to investigate the failure mechanism of rock joint,a series of laboratory tests including cyclic direct shear tests under constant normal load(CNL)conditions were conducted.Morphology parameters of the rock joint surface were precisely calculated by means of a three-dimensional laser scanning machine.All test results were analyzed to investigate the shear behavior and normal displacement behavior of rock joints under CNL conditions.Degradation of rock joint surface during cyclic shear tests was also analyzed.The comparison results of the height parameters and the hybrid parameters of the joint surface during cyclic tests show that the degradation of the surface mostly happens in the first shear and the constant normal loads imposed on the joints have significant promotion effects on the morphology degradation.During cyclic shear tests,joints surfaces evolve from rough state to smooth state but keep an overall undulation.Dilatancy of rock joints degrades with the degradation of joint surface and the increase of normal loads.The closure deformation of joint is larger than that of the intact rock,and the normal stiffness increases with the increase of shearing times.

Complete Space-like Submanifolds with Constant Scalar Curvature in de Sitter Spaces

In this paper,we study the complete space-like submanifold Mn with constant scalar curvature R≤c in the de Sitter space Spn+p(c) and obtain a pinching condition for Mn to be totally umbilical ones.The result generalizes that in [5,Main Theorem] to higher codimension and give a complement for n=2 there.

Application of wavelet analysis to fault diagnosis of angular measuring system

For fault diagnosis, signal singularity and irregularity discontinuity fraction are very significant characteristics of signal. The discontinuity of output signal represents a system fault . In an angular measuring system, function transformer uses two D/A convertors, output circuit fault of a D/A convertor brings about discontinuity of one phase input voltage amplitude of inductosyn, results in a system error exceeding the allowable error and reduces the system accuracy. This is the reason why discontinuity is detected. Fourier transform has no resolution ability in angular domain, but wavelet can analyse signal in angular and frequency domains. So we decompose the error signal of angular measuring system by wavelet, detect the signal singularity at high frequency layer and find out the accurate position of it.

Hypersurfaces with Constant Mean Curvature in Space Forms

In this paper,we study the pinching problem for a hypersurface with constant mean curvature in space forms to be totally umbilical by osing the relationship between the square of the length of the second fundamental form and the mean curvature. We obtained a best pinching interval and decided the complete classification of hypersurfaces at the terminal of the interval.This improved the relative results of M. Okumura,Shen Yibihg and Sun Ziqi,etc.

The Isometry of Riemannian Manifold to a Sphere

In this paper the quasi-constant curvature space and the Riemannian manifold contained the totally umbilical hypersurface family are studied,and two theorems are given at the same time.

Deformation Anomalies before the February 12,2014,M_S7.3 Yutian Earthquake

The Yutian earthquake with M_S7.3 happened on February 12,2014. The precursor monitoring ability is weak in that area. We found tendency anomalies and middle- and short-term anomalies from metal pendulum tilt measurements in Hotan seismic station before the earthquake. And we also compared the anomalies with that of the M_S7.3 Yutian earthquake on March 21,2008. The tendency anomalies measured by the metal pendulum tiltmeter appeared since 2012 as tilting eastward. While the middle- and short-term anomalies were characterized by acceleration,pause and rapid change of tilt rate in two directions. The tendency anomalies of metal pendulum tilt records are the same before the two earthquakes. They both happened in the east direction. However,there are differences in duration,characteristic and earthquake intervals for the middle- and short-term anomalies.