ATTITUDE MEASUREMENT ON HIGH-SPINNING PROJECTILE USING MAGNETIC SENSORS AND ACCELEROMETERS

In allusion to the limitations of the traditional attitude measurement system consisting of a three-axis magnetic sensor and two accelerometers on high-spinning projectile, a new scheme comprised of two magnetic sensors and two accelerometers installed in a particular way is given. The configuration of the sensors is described. The calculation method and the mathematical model of the projectile attitude based on the sensor configuration are discussed. The basic calculation method including the Magsonde Window, the proof of the ratios of maximums and minimums and the calculation of the attitude angles are analyzed in theory. Finally, the system is simulated under the given conditions. The simulation result indicates that the estimated attitude angles are in agreement with the true attitude angles.

Wavelet transform and gradient direction based feature extraction method for off-line handwritten Tibetan letter recognition

To improve the recognition accuracy of off-line handwritten Tibetan characters the local gradient direction histograms based on the wavelet transform are proposed as the recognition features.First for a Tibetan character sample image the first level approximation component of the Haar wavelet transform is calculated.Secondly the approximation component is partitioned into several equal-sized zones. Finally the gradient direction histograms of each zone are calculated and the local direction histograms of the approximation component are considered as the features of the character sample image.The proposed method is tested on the recently developed off-line Tibetan handwritten character sample database.The experimental results demonstrate the effectiveness and efficiency of the proposed feature extraction method.Furthermore compared with the detail components the approximation component contributes more to the recognition accuracy.

The numerical simulation and inversion fitting of radon concentration distribution in homogeneous overburden above active fault zones

Based on the convection and diffusion mechanisms of radon migration, in this paper we deduce the two-dimensional differential equation for radon transportation in the overburden above active fault zones with an unlimited extension along the strike. Making use of the finite difference method, the radon concentration distribution in the overburden above active faults is calculated and modeled. The active fault zone parameters, such as the depth and the width of the fault zone, and the value of radon concentration, can be inverted from the measured radon concentration curve. These realize quantitative interpretation for radon concentration anomalies. The inversion results are in good agreement with the actual fault zone parameters.

THEORETICAL ANALYSIS AND EXPERIMENTAL RESEARCH FOR ULTIMATE LOAD-CARRYING CAPACITY OF WEB PLATES OF Ⅰ-SECTION PLATE GIRDERS

The post buckling strength of web plate of I section plate girders is considered to resist the shear force in many other countries code for design of steel structures,while it has not been considered in the Chinese code GB J17-88.For the code revising,some important conclusions have been drawn through the theoretical analysis and experimental research of the post buckling strength of web plate of I section plate girders.

Numerical simulation of temperature and velocity fields in plasma spray

Based on the turbulence jet model, with respect to Ar-He mixture plasma gas injecting to ambient atmosphere, the temperature filed and velocity field under typical working conditions were investigated. Given the conditions of I=900 A, FAr= 1.98 m^3/h, FEe=0.85 m^3/h, it is found that both the temperature and the velocity undergo a plateau region near the nozzle exit （0-10 mm） at the very first stage, then decrease abruptly from initial 13 543 K and 778.2 m/s to 4 000 K and 260.0 m/s, and finally decrease slowly again. Meanwhile, the radial temperature and radial velocity change relatively slow. The inner mechanism for such phenomena is due to the complex violent interaction between the high-temperature and high-velocity turbulent plasma jet and the ambient atmosphere. Compared with traditional methods, the initial working conditions can be directly related to the temperature and velocity fields of the plasma jet by deriving basic boundary conditions.

A text to speech interface for Universal Digital Library

The objective of Universal Digital Library (UDL) is to capture all books in digital format. A text to speech (TTS) interface for UDL portal would enable access to the digital content in voice mode, and also provide access to the digital content for illiterate and vision-impaired people. Our work focuses on design and implementation of text to speech interface for UDL portal primarily for Indian languages. This paper is aimed at identifying the issues involved in integrating text to speech system into UDL portal and describes the development process of Hindi, Telugu and Tamil voices under Festvox framework using unit selection techniques. We demonstrate the quality of the Tamil and Telugu voices and lay out the plan for integrating the TTS into the UDL portal.

A study on the feasibility of CET oral test based on automatic essay marking

This paper discusses the approach to the CET （college English test） oral test based on automatic essay marking （AEM）. The reliability and validity arouses a dispute on Internet-based CET （iB-CET） oral test in China, leading to the penetration into oral test contents in dialogue, description or comment, and question answering. Then, a probe into transformation from a spoken document into a textual document is touched on a conversion ratio of 72% adopted at the present time, AEM to be carried forward being a necessary hypothesis for Afterwards, this paper focuses on the pipeline in AEM with the content features and the language itself, which is established in two different models in marking for extraction and detection. Through experiments, this paper reveals the fact that an iB-CET oral test can be performed perfectly in the pipeline of spoken documents transformed into textual documents which can be automatically marked. Hence the design of the iB-CET oral test reaches its reliability and validity.

Analyses of noncommensurate sampling used in high-precision regenerative pseudo-noise ranging systems

A high-precision pseudo-noise ranging system is often required in satellite-formation missions. But in an actual PN ranging system, digital signal processing limits the ranging accuracy, only level up with meter-scale. Using non-integer chip to sample time ratio, noncommensurate sampling was seen as an effective solution to cope with the drawback of digital effects. However, researchers only paid attention to selecting specific ratios or giving a simulation model to verify the effectiveness of the noncommensurate ratios. A qualitative analysis model is proposed to characterize the relationship between the range accuracy and the noncommensurate sampling parameters. Moreover, a method is also presented which can be used to choose the noncommensurate ratio and the correlation length to get higher phase delay distinguishability and lower range jitter. The simulation results indicate the correctness of our analyses and the optimal ranging accuracy can be up to centimeter-level with the proposed approach.

SIMULATION STUDY ON CAUSES OF TROPICAL STORM FITOW (0114) HEAVY RAIN

With PSU/NCAR nonhydrostatic mesoscale model MM5, the rainfall process of tropical storm Fitow(0114) is simulated for 00:00 UTC 31 Aug. – 00:00 UTC 2 Sept. 2001. Mesoscale separation is performed on the results with the filtering scheme. Analyses show that the MM5 model well reproduced the position and intensity of heavy rain. Mesoscale characteristics of heavy rain were well represented in rainfall time scale, rainfall area, stream field and divergence at lower and upper levels. The interaction between inverted typhoon troughs and the mesoscale systems lead to heavy rain occurrence. The distribution of divergence fields at lower and upper levels can have a kind of indication for the rainfall. Heavy rains are closely associated with topography and land-sea distribution in South China. Weak instability is favorable to the generation of heavy rain.

Emotional Vector Distance Based Sentiment Analysis of Wakamono Kotoba

In this paper,we propose a method for estimating emotion in Wakamono Kotoba that were not registered in the system,by using Wakamono Kotoba example sentences as features.The proposed method applies Earth Mover's Distance(EMD) to vector of words.As a result of the evaluation experiment using 14 440 sentences,higher estimation accuracy is obtained by considering emotional distance between words-an approach that had not been used in the conventional research-than by using only word importance value.

THE FORMATION AND DEVELOPMENT OF A MESOSCALE CONVECTIVE SYSTEM WITH HEAVY RAINFALL ALONG SOUTH CHINA COASTAL AREA

Observational analysis shows that a Mesoscale Convective System (MCS) occurred on May 13-14 2004 along the coastal area in South China. The MCS initiated among the southwesterly flows within a west-east orientation low-level shear line. Associated with the system, in its subsequent development stages, no distinct vortex circulation developed in low-level. Instead, a cyclonic flow disturbance was observed in the mid-troposphere. How the convection starts to develop and evolve into a MCS With observational analysis and numerical simulation, the problem has been studied. The high-resolution MM5 simulation shows that topographic convergence along the coastal line and the nearby mountains in western South China plays an important role to initiate the MCS convection. Once the convection occurs, due to the condensation heating, a cooperative interaction between the preexisting mid-level disturbance and convection is created, which may greatly affect the MCS development during periods when the system continues moving eastward. Compared to some typical MCS that happen in Southern China, which are usually accompanied with upward development of cyclonic vorticity, the development and evolution of the investigated MCS shows distinguishing features. In this article, the physical mechanisms responsible for the intensification of mid-level disturbance are discussed, and a viewpoint to interpret the effects of mid-level disturbance on the MCS organizational development is proposed.

Multi-scale and multi-component digital core construction and elastic property simulation

The conventional digital core models are usually small in size and have difficulty in representing the complex structures of heterogeneous rocks;Therefore,the parameters of simulated rock physics are difficult to be referenced.In this study,we propose a feasible simulation method for obtaining multi-scale and multi-component digital cores based on three types of sandstone samples.In the proposed method,the plug and subplug samples are scanned via micro-computed tomography at different resolutions.Furthermore,the images are precisely registered using the proposed hybrid image registration method.In case of high-resolution images,the traditional segmentation method is used to segment the cores into pores and minerals.Subsequently,we established the relations between the gray values and the porosity/mineral content in case of the low-resolution images based on the registered domains and the relation curves were applied to the segmentation of the low-resolution images.The core images constitute the multi-scale and multi-component digital core models after segmentation.Further,the elastic properties of the three samples were simulated at both fine and coarse scales based on the multi-scale and multi-component digital core models,and four component models were considered.The results show that the multi-scale and multi-component digital core models can overcome the representative limits of the conventional digital core models and accurately characterize pores and minerals at different scales.The numerical results of the elastic modulus are more representative at large scales,and considerably reliable results can be obtained by appropriately considering the minerals.

Energy Efficient Multi-Antenna UAV-Enabled Mobile Relay

In this paper, we study an energy efficient multi-antenna unmanned aerial vehicle(UAV)-enabled half-duplex mobile relaying system under Rician fading channels. By assuming that the UAV follows a circular trajectory at fixed altitude and applying the decode-and-forward relaying strategy, we maximize the energy efficiency by jointly designing beamforming, power allocation, circular radius and flight speed, subject to the sum transmit power constraint on source node and UAV relay node. First, we maximize the end-to-end signal-to-noise ratio by jointly designing beamforming and statistical power allocation. Based on the obtained beamforming and power allocation results, we then obtain a semi closed-form expression of energy efficiency, and finally maximize energy efficiency by optimizing flight speed and circular radius, allowing optimal circular radius to be obtained via numerical computation. Numerical results demonstrate that the proposed scheme can effectively enhance the system energy efficiency.

2D-ball simulations on stiffness influences for coal bump

Coal bump is a dynamic process,thus it is necessary to reveal the process validly.2D-ball code is an efficient approach developed by the authors based on the basicDEM rationale proposed by Cundall.Numerical simulations show that the coal bump experiencesa process of energy accumulation,sudden release of energy and energy decrease.The stiffness of coal particles has a great influence on the coal bump morphosisand particle velocity.Generally,the larger the stiffness of particles,the longer the shootingoff period and the larger the bump velocity.This is in agreement with the results of laboratoryexperiment and in-situ studies.However,the stiffness of particles has an influence onthe quantity value energy and no influence on the releasing energy pattern of the coalbump.

A mathematical model of the temperature in a coalfield fire area

The regular pattern of temperature change in a coalfield fire area while the fire is being extinguished was studied. To determine the extinguishing effect, a series of linear, logarithmic, polynomial or exponential mathematical regression models were constructed using the observed temperature data from the Xinjiang coalfield fire extinguishing project. The quadratic polynomial mathematical model had the best fit. A large coal fire oven was also used to simulate the coal fire extinguishing process. The same mathematical regression experiments were carried out on that observed data. The results verified that the quadratic polynomial mathematical model had the best fit. Therefore, a quadratic polynomial mathematical model is proposed to accurately model the temperature-time relationship in a coalfield fire area. An application to coalfield fire suppression shows that the deduced mathe-matical model can be used to predict the temperature conditions and to determine the effect of fire extinguishing, thereby helping to speed up the fire suppression process in the coalfield fire area.

An Analysis and Modeling Study of a Sea Fog Event over the Yellow and Bohai Seas

In this study, a sea fog event which occurred on 27 March 2005 over the Yellow and Bohai Seas was investigated observationally and numerically. Almost all available observational data were used, including satellite imagery of Geostationary Operational Environmental Satellite （GOES）-9, three data sets from station observations at Dandong, Dalian and Qingdao, objectively reanalyzed data of final run analysis （FNL） issued by the National Center for Environmental Prediction （NCEP） and Regional Atmospheric Modeling System （RANIS） results. Synoptic conditions and fog characteristics were analyzed. The fog formed when warm, moist air was advected northwards over the cool water of the Yellow and Bohai Seas, and dissipated when a cold front brought northerly winds and cool, dry air. In order to better understand the fog formation mechanism, a high-resolution RAMS modeling with a 6km×6km grid, initialized and validated by FNL data, was designed. A 48h modeling that started from 12 UTC 26 March 2005 reproduced the main characteristics of this sea fog event. The simulated lower visibility area agreed reasonably well with the sea fog region identified from the satellite imagery. Advection cooling effect seemed to play a significant role in the fog formation.

Numerical Simulation on Dynamic Bending Strength of Three-Graded Concrete Beam Based on Meso-Mechanics

To study the bending strength of mass concrete under dynamic loading, the pure bending zone of three-graded concrete beam is considered as a three-phase composite composed of matrix, aggregate and interface between them on meso-level. Dynamic constitutive model considering strain-rate strengthening effect and damage softening effect is adopted to describe the cocrete and meso-element's damage. The failure mechanisms of beam under impact loading, triagle wave load, dynamic load coupling with initial static loading were simulated by using displacement-controlled FEM. Furthermore, stress-strain curve of the specimens and their dynamic bending strength were obtained. The results obtained from numerical simulation agreed well with experimental data.

A SIMULATION STUDY OF THE INFLUENCE OF LAND FRICTION ON LANDFALL TROPICAL CYCLONE TRACK AND INTENSITY

A quasi-geostrophic barotropic vorticity equation model is used to simulate the influences of topographic forcing and land friction on landfall tropical cyclone track and intensity. The simulation results show that tropical cyclone track may have sudden deflection when the action of topographic friction dissipation is considered, and sudden deflection of the track is easy to happen and sudden change of tropical cyclone intensity is not clear when the intensity of tropical cyclone is weak and the land friction is strong. The land friction may be an important factor that causes sudden deflection of tropical cyclone track around landfall.

A Case Study of Using External DEM in InSAR DEM Generation

Synthetic aperture radar interferometry (InSAR) has been used as an innovative technique for digital elevation model (DEM) and topographic map generation. In this paper, external DEMs are used for InSAR DEM generation to reduce the errors in data processing. The DEMs generated from repeat-pass InSAR are compared. For steep slopes and severe changes in topography, phase unwrapping quality can be improved by subtracting the phase calculated from an external DEM. It is affirmative that the absolute height accuracy of the InSAR DEM is improved by using external DEM. The data processing was undertaken without the use of ground control points and other manual operation.

Segments-based progressive TIN densification filter for DTM generation from airborne LIDAR data

Airborne light detection and ranging( LIDAR) has revolutionized conventional methods for digital terrain models( DTMs) acquisition. Ground filtering for airborne LIDAR is one of the core steps taken to obtain a high quality DTM. This paper presents a segments-based progressive TIN( triangulated irregular network) densification( SPTD) filter that can automatically separate ground points from non-ground points. The SPTD method is composed of two key steps: point cloud segmentation and clustering by iterative judgement. The clustering method uses the dual distance to obtain a set of seed points as a coarse spatial clustering process. Then the rest of the valid point clouds are classified iteratively. Finally,the datasets provided by ISPRS are utilized to test the filtering performance.In comparison with the commercial software Terra Solid,the experimental results show that the SPTD method in this paper can avoid single threshold restrictions. The expected accuracy of ground point determination is capable of producing reliable DTMs in the discontinuous areas.