转化“潜能生”要用“心”计

在新课程标准下如何转化"潜能生",是每个中学教师都在探索和研究的课题,而越来越多的农村初中英语"潜能生"能否成功转化是大面积提高初中英语教学质量的关键。因此笔者在多年的调查和实践后,发现对英语"潜能生"的转化确实要用点"心"计才行。

Research on Multi-modal In-Vehicle Intelligent Personal Assistant Design

Intelligent personal assistants play a pivotal role in in-vehicle systems,significantly enhancing life efficiency,driving safety,and decision-making support.In this study,the multi-modal design elements of intelligent personal assistants within the context of visual,auditory,and somatosensory interactions with drivers were discussed.Their impact on the driver’s psychological state through various modes such as visual imagery,voice interaction,and gesture interaction were explored.The study also introduced innovative designs for in-vehicle intelligent personal assistants,incorporating design principles such as driver-centricity,prioritizing passenger safety,and utilizing timely feedback as a criterion.Additionally,the study employed design methods like driver behavior research and driving situation analysis to enhance the emotional connection between drivers and their vehicles,ultimately improving driver satisfaction and trust.

Prediction of compressive strength of cement mortars with fly ash and activated coal gangue

The pozzolanic activity of coal gangue, which is calcining at 500 to 1 000 ℃, differs distinctly. The simplex-centroid design with upper and lower bounds of component proportion is adopted to study the compressive strength of mortars made with ternary blends of cement, activated coal gangue and fly ash. Based on the results of a minimum of seven design points, three special cubic polynomial models are used to establish the strength predicating equations at different ages for mortars. Five experimental checkpoints were also designed to verify the precision of the equations. The most frequent errors of the predicted values are within 3%. A simple and practical way is provided for determining the optimal proportion of two admixtures when they are used in concrete.

Calculation on uniaxial compressive strength of high strength concrete after wrapped by FRP

A theoretical calculation method of the axial compressive strength of a high strength concrete with fibre reinforced plastics (FRP) constraint is proposed. It is shown by test verification that the FRP strength devotion factor used for this method is in accordance with actual conditions. FRP is not up to the ultimate strength when the concrete reaches the ultimate strength, whose strength devotion factor is in the range of 0.28 to 0.59, which is related to an elastic modulus. The method can be used to estimate axial compressive strength of the concrete strengthened with FRP. The theoretical strength is 10% to 30% higher than the measured one. The deviation comes mainly from a non-ideal bonding condition of FRP-concrete interfaces and discrete property of the testing data of compressive strength.

Corpus-based Translation Class Design Study

This essay accesses to the approach of corpus applied to translation teaching, in order to improve the teaching methods, lay the foundation for the translation teaching reform, cultivate students research ability, and finally to establish a new type of translation teaching design-- ＂ability-development-oriented design＂. Also, this paper takes the word ＂good＂ for example, looking for the general rules to translate it and its common collocation, in order to design a translation class. Corpus-based learning and teaching provides us a new feasible way of translation class.

An Enhanced Hadoop Heartbeat Mechanism for MapReduce Task Scheduler Using Dynamic Calibration

MapReduce is a popular program- ming model for processing large-scale datasets in a distributed environment and is a funda- mental component of current cloud comput- ing and big data applications. In this paper, a heartbeat mechanism for MapReduce Task Scheduler using Dynamic Calibration （HMTS- DC） is proposed to address the unbalanced node computation capacity problem in a het- erogeneous MapReduce environment. HMTS- DC uses two mechanisms to dynamically adapt and balance tasks assigned to each com- pute node： 1） using heartbeat to dynamically estimate the capacity of the compute nodes, and 2） using data locality of replicated data blocks to reduce data transfer between nodes. With the first mechanism, based on the heart- beats received during the early state of the job, the task scheduler can dynamically estimate the computational capacity of each node. Us- ing the second mechanism, unprocessed Tasks local to each compute node are reassigned and reserved to allow nodes with greater capacities to reserve more local tasks than their weaker counterparts. Experimental results show that HMTS-DC performs better than Hadoop and Dynamic Data Placement Strategy （DDP） in a dynamic environment. Furthermore, an en- hanced HMTS-DC （EHMTS-DC） is proposed bv incorporatin historical data. In contrastto the ＂slow start＂ property of HMTS-DC, EHMTS-DC relies on the historical computation capacity of the slave machines. The experimental results show that EHMTS-DC outperforms HMTS-DC in a dynamic environment.

Analysis of Heat Transfer Performance of Oscillating Heat Pipes Based on a Central Composite Design

Oscillating heat pipes (OHPs) are very promising cooling devices. Their heat transfer performance is af- fected by many factors, and the form of the relationship between the performance and the factors is complex and non-linear. In this paper, the effects of charging ratio, inclination angle, and heat input and their interaction effects on heat transfer performance of a looped copper-water OHP are analyzed. First, suppose that the relationship between the response and the variables approximates a second-order model. And use the central composite design to arrange the ex- periment. Then, the method of least squares is used to estimate the parameters in the second-order model. Finally, multi- variate variance analysis is used to analyze the model. The results show that the assumption is right, that is to say, the re- lationship is well modeled by a second-order function. Among the three main effect variables, the effect of inclination angle is the most significant, but their interaction effects are not significant. In the range of the considered factors, both the optimum charging ratio and the optimum inclination angle increase as the heating water flow rate increases.

Service optimization in programmable cloud network

With the rapid development in cloud data centers and cloud service customers,the demand for high quality cloud service has been grown rapidly.To face this reality,this paper focuses on service optimization issues in cloud computing environment.First,a service-oriented architecture is proposed and programmable network facilities are utilized in it to optimize specific cloud services.Then various cloud services are categorized into two subcategories;static services and dynamic services.Furthermore,the concepts of cloud service quality and cloud resource idle rate are defined,and the aforementioned concepts have also been taken into consideration as parameters in the service optimization algorithm to improve the cloud service quality and optimize system workload simultaneously.Numerical simulations are conducted to verify the effectiveness of the proposed algorithm in balancing the workload of all servers.

Abandoned coal mine tunnels: Future heating/power supply centers

We have studied three plans for re-use of the abandoned mine roadway tunnels as an energy center. These are the thermostat plan, the thermal accumulator plan, and the CAES plan. Calculations show that the thermostat plan can provide over 15,000 m2 of building air-conditioning/heating load for each kilo- meter of roadway, but electric power is needed to run the system. Numerical research proved that the accumulation of hot water in the roadway for seasonal heating purposes （a temperature swing from 90 to 54 ℃） is a viable possibility. The CAES plan proposes using the discarded coal mine tunnel as a pea ing power station with an energy storage density over 7000 kj/m3. It can be concluded that presently abandoned coal mines could be reformed into future energy centers for a city.

Improvement of Urban Impervious Surface Estimation in Shanghai Using Landsat7 ETM+ Data

This paper explores the potential to improve the impervious surface estimation accuracy using a multi-stage approach on the basis of vegetation-impervious surface-soil (V-I-S) model. In the first stage of Spectral Mixture Analysis (SMA) process, pixel purity index, a quantitative index for defining endmember quality, and a 3-dimensional endmember selection method were applied to refining endmembers. In the second stage, instead of obtaining impervious surface fraction by adding high and low albedo fractions directly, a linear regression model was built between impervious surface and high/low albedo using a random sampling method. The urban impervious surface distribution in the urban central area of Shanghai was predicted by the linear regression model. Estimation accuracy of spectral mixture analysis and impervious surface fraction were assessed using root mean square (RMS) and color aerial photography respectively. In comparison with three different research methods, this improved estimation method has a higher overall accuracy than traditional Linear Spectral Mixture Analysis (LSMA) method and the normalized SMA model both in root mean square error (RMSE) and standard error (SE). However, the model has a tendency to overestimate the impervious surface distribution.

Four basic laws in design science

A point on the distinction between design and science is given and the connotanons of aeslgn science are discussed in the paper. Design should be understood as the first step of all human＇ s purposeful activity, which is a daily behavior for everyone. Four laws are summarized, which describe the basic patterns of design and are the constituents of design science. They are the law of design based on existed knowledge, law of in- completeness of design knowledge, law of design centered on new knowledge acquirement and law of competi- tiveness of design knowledge. The four basic laws show the knowledge essence of design. To enrich the existed knowledge, to make it convenient to be used, to teach designers with high intuition and inspiration in picking useful elements of existed knowledge and shaping competitive ideas and to have strong new knowledge acquire- ment facility are the basic conditions of good designs. Study of design science will promote the structure of tra- ditional engineering education. An important conclusion is derived that there will be no successful innovation without good design.

Deformation prediction and analysis of underground mining during stacking of dry gangue in open-pit based on response surface methodology

Deformation prediction and the analysis of underground goaf are important to the safe and efficient recovery of residual ore when shifting from open-pit mining to underground mining.To address the comprehensive problem of stability in the double mined-out area of the Tong-Lv-Shan(TLS)mine,which employed the dry stacked gangue technology,this paper applies the function fitting theory and a regression analysis method to screen the sensitive interval of four influencing factors based on single-factor experiments and the numerical simulation software FLAC3D.The influencing factors of the TLS mine consist of the column thickness(d),gob area span(D),boundary pillar thickness(h)and height of tailing gangue(H).The fitting degree between the four factors and the displacement of the gob roof(W)is reasonable because the correlation coefficient(R2)is greater than0.9701.After establishing29groups that satisfy the principles of Box-Behnken design(BBD),the dry gangue tailings process was re-simulated for the selected sensitive interval.Using a combination of an analysis of variance(ANOVA),regression equations and a significance analysis,the prediction results of the response surface methodology(RSM)show that the significant degree for the stability of the mined-out area for the factors satisfies the relationship of h>D>d>H.The importance of the four factors cannot be disregarded in a comparison of the prediction results of the engineering test stope in the TLS mine.By comparing the data of monitoring points and function prediction,the proposed method has shown promising results,and the prediction accuracy of RSM model is acceptable.The relative errors of the two test stopes are1.67%and3.85%,respectively,which yield satisfactory reliability and reference values for the mines.

Left Ventricle Failure and Blood Flow Estimation for Centrifugal Blood Pumps

This paper shows the blood flow control （FwC） performance to adjust rotational speed of an ICBP （implantable centrifugal blood pump） in order to provide an adequate flow to left ventricle in different patient conditions. ICBP is a totally implantable LVAD （left ventricular assist device） with ceramic bearings developed for long term circulatory assistance. FwC uses PI （proportional-integral） control to adjust rotational speed in order to provide blood flow. FwC does not use sensor for feedback, as there is an estimation system to provide blood flow measurement. Control strategy has being studied in a HCS （hybrid cardiovascular simulator） as a tool that allows the physical connection of ICBP during evaluation. In addition, HCS allows changes of some cardiovascular parameters in order to simulate specific heart disease： ejection fraction （10-25%） and heart rate （50-110 bpm）. FwC was able to adjust blood flow with steady error less than 2%. Results demonstrated that FwC is adequate to LVAD control irL different left ventricle failure conditions.

Prediction and optimization of aerodynamic noise in an automotive air conditioning centrifugal fan

The high aerodynamic noise induced by automotive air conditioning systems has important effects on the ride comfort, and the centrifugal fan is the largest noise source in these systems. It is very important to reduce the aerodynamic noise generated by the centrifugal fan. The flow field and the sound field on the whole centrifugal fan configuration have been carried out using the computational fluid dynamics. Simulation results show that the sound pressure level near the outlet of the centrifugal fan is too high. Based on the relationship between flow characteristics and the aerodynamic noise, four parameters of the centrifugal fan, i.e., impeller blade＇s outlet angle 0, volute tongue＇s gap t, collector inclination angle fl, and rotating speed n, were selected as design variables and optimized using response surface methodology. While keeping the function of flow rate unchanged, the peak noise level is reduced by 8 dB or 10.8%. The noise level is satisfactorily reduced.

Optimization on the Conversion of Bamboo Shoot Shell to Levulinic Acid with Environmentally Benign Acidic Ionic Liquid and Response Surface Analysis

Levulinic acid（LA） has been identified as a promising green,biomass derived platform chemical.Response surface analysis（RSA） with a four-factor-five-level central composite design（CCD） was applied to optimize the hydrolysis conditions for the conversion of bamboo（Phyllostachys Praecox f.preveynalis） shoot shell（BSS） to LA catalyzed with ionic liquid [C4mim]HSO4.The effects of four main reaction parameters including temperature,time,C[C4mim]HSO4（initial [C4mim]HSO4 concentration） and XBSS（initial BSS intake） on the hydrolysis reaction for yield of LA were analyzed.A quadratic equation model for yield of LA was established and fitted to the data with an R2 of 0.9868,and effects of main factors and their corresponding relationships were obtained with RSA.Model validation and results of CCD showed good correspondence between actual and predicted values.The analysis of variance（ANOVA） of the results indicated that the yield of LA in the range studied was significantly（P＆lt;0.05） affected by the four factors.The optimized reaction conditions were as follows：temperature of 145 ℃,time of 103.8 min,C[C4mim]HSO4 of 0.9 mol.L-1 and XBSS of 2.04%（by mass）,respectively.A high yield [（71±0.41）%（by mol）,triplicate experiment] was obtained at the optimum conditions of temperature of 145 ℃,time of 104 min,C[C4mim]HSO4 of 0.9 mol.L-1 and XBSS of 2%（by mass）,which obtained from the real experiments,concurred with the model prediction [73.8%（by mol） based on available C6 sugars in BSS or 17.9%（by mass） based on the mass of BSS],indicating that the model was adequate for the hydrolysis process.

Analysis of complete plasticity assumption for solid circular shaft under pure torsion and calculation of shear stress

The distribution of shear stress on the cross-section of plastic metal solid circular shaft under pure torsion yielding, the applicability of complete plastic model assumption and the shear stress formula were researched. Based on the shear stress formula of circular shaft under pure torsion in elastic stage, the formula of torque in elastic stage and the definition of yield, it is obtained that the yielding stage of plastic metal shaft under pure torsion is only a surface phenomenon of torque-torsion angle relationship, and the distribution of shear stress is essentially different from that of tensile stress when yielding under uniaxial tension. The pure torsion platform-torsion angle and the shape of torque-torsion angle curve cannot change the distribution of shear stress on the shaft cross-section. The distribution of shear stress is still linear with the maximum shear stress ts. The complete plasticity model assumption is not in accordance with the actual situation of shaft under torsion. The experimental strength data of nine plastic metals are consistent with the calculated results of the new limiting strain energy strength theory （LSEST）. The traditional yield stress formula for plastic shaft under torsion is reasonable. The shear stress formula based on the plane assumption in material mechanics is applicable for all loaded stages of torsion shaft.

EXPERIMENTAL STUDY OF HOMIUM:YAG LASER TRANSMYOCARDIAL REVASCULARIZATION IN ACUTE ISCHEMIC SETTINGS WITH MYOCARDIAL CONTRAST ECHOCARDIOGRAPHY

Objective. To study the mechanism and effects of blood perfusion to the acute ischemic region of myocardium through Ho-YAG laser channels with myocardial contrast echocardiography. Methods. To produce the model of acute myocardial ischemia,we partially ligated the left anterior decending(LAD)coronary artery of canine hearts between lst.and 2nd.diagonal branches and then performed transmyocardial revascularization in this region with Ho-YAG laser.Myocardial contrast echocardiography was made with a new generation of ultrasound contrast agent and second harmonic imaging of this region before,after ischemia and after laser revascularization.Pictures were taken with “R” wave trigger skill. Results.Acoustic density derterming in the ischemia region (anterior wall)with MCE(myocardial contrast echocardiography)was obviously decreased(540±181) after the LAD was ligated,as compared with before(1169±161, P<001).It was increased remarkably after transmyocardial laser revascularizatuon(TMLR)(112±201, P<001)as compared with that when ischemia and approximated to that before ischemia(P>005).There were no differences in acoustic density in the lateral wall(as control)among these comprehensive three periods(P>005).Contrast in the laser region developed one cardiac cycle ahead of that in the non-ischemic normal region. Conclusion.Acute ischemic myocardium can be perfused by oxygenated blood from the left ventricle through Ho-YAG laser channels.Evidence of blood perfusion through laser channels during systolic phase was detected,and myocardial contrast ultrasonography using intravenous perfluorocarbon-exposed sonicated dextrose albumin rnay be regarded as a reliable method in the study of transmyocardial revascularization.

Western North Pacific Tropical Cyclone Intensity Guidance Evaluations Using an Alternative Verification Technique

In this study,six intensity forecast guidance techniques from the East China Regional Meteorological Center are verified for the 2008 and 2009 typhoon seasons through an alternative forecast verification technique.This technique is used to verify intensity forecasts if those forecasts call for a typhoon to dissipate or if the real typhoon dissipates.Using a contingency table,skill scores,chance,and probabilities are computed.It is shown that the skill of the six tropical cyclone intensity guidance techniques was highest for the 12-h forecasts,while the lowest skill of all the six models did not occur in 72-h forecasting.For both the 2008 and 2009 seasons,the average probabilities of the forecast intensity having a small error(6 m s-1) tended to decrease steadily.Some of the intensity forecasts had small skill scores,but the associated probabilities of the forecast intensity errors > 15 m s-1 were not the highest.

CLINICAL ASSESSMENT OF BIPLANAR TRANSESOPHAGEAL ECHOCARDIOGRAPHY──A REPORT OF 125 CASES

One hundred and twenty-five patients with cardiovascular disease were examined by biplanar transesophageal echocardiography (BTEE), including 67 with rheumatic heart disease (7 monitored during operation), 22 with aortic diseases, 20 with congenital heart diseases. and 16 with other kinds of heart disease. The results showed that BTEE was not influenced by corpulent and pulmonary emphysema and was better than transthoracic echocardiography at imaging the interatrial septum, left atrium and left atrial appendage, thoracic aorta, and mitral artificial valve and at intraoperative monitoring. BTEE was also better than single-plane transesophageal echocardiography,because BTEE could be used to observe the heart and thoracic aorta in transverse and longitudinal planes, thus enlarging the transmission 'window' as well as allowing the entire lesion to be imaged.This study suggests that BTEE will have good prospects in clinical application.

Bioassay-Guided Extraction of Crude Fucose-Containing Sulphated Polysaccharides from Sargassum fusiforme with Response Surface Methodology

The response surface methodology(RSM) combined with bioassays was employed to optimize the extraction process of crude fucose-containing sulphated polysaccharides(c FCSP) from Sargassum fusiforme. The central composite design(CCD) was used with four variables, five levels, and four responses. The four variables were p H value of hydrochloric acid solution, extraction temperature(℃), ratio of liquid to raw material(m L g^(-1)), and extraction time(h), respectively. Chemical and bioassay indices were used in combination as the response parameters, which included the yield of c FCSP, fucose content, proliferation rate of spleen cells, and lipopolysaccharide-induced proliferation of splenocytes. The experimental data were fitted to a second-order polynomial equation using multiple regression analysis, and examined using the appropriate statistical methods. The best extraction conditions were as follows: the p H value of hydrochloric acid solution was 3.50; the extraction temperature was 100℃; the ratio of liquid to raw material was 15.00 m L g^(-1) and the extraction time was 2.50 h. The experimental yield was close to the predicted from the model. The extract could promote spleen lymphocyte proliferation, especially the lipopolysaccharide-induced lymphocyte proliferation in vitro, which suggested that its immunomodulatory effect on B lymphocytes. Therefore, c FCSP extracted from S. fusiforme could be utilized as an immunostimulant in functional foods and pharmaceutical industry in future.