“技术聚合”模式驱动下的中国民营书店发展趋势研究——从符号传播学视域解读“新零售”营销模式

当前,中国民营书店营销模式已从"O2O"进入到"新零售"阶段,然而,这两种营销模式概念中存在的争议,已成为困扰民营书店理论创新的瓶颈。本文通过移植符号传播学中的"元传播"理论,尝试对两种营销模式进行跨学科解读,通过分析发现,"新零售"模式的核心是技术驱动力。这种高度强调"技术聚合"的模式特征,不仅是目前民营书店行业发展的动力,而且已成为行业的"元传播"范本,并由此发展出了"精准分类与有效转化""及时跟进与无缝配合"这两种具体的操作原则。

Research on the imaging of concrete defect based on the pulse compression technique

When the synthetic aperture focusing technology （SAFT） is used for the detection of the concrete, the signal-to-noise ratio （SNR） and detection depth are not satisfactory. Therefore, the application of SAFT is usually limited. In this paper, we propose an improved SAFT technique for the detection of concrete based on the pulse compression technique used in the Radar domain. The proposed method first transmits a linear frequency modulation （LFM） signal, and then compresses the echo signal using the matched filtering method, after which a compressed signal with a narrower main lobe and higher SNR is obtained. With our improved SAFT, the compressed signals are manipulated in the imaging process and the image contrast is improved. Results show that the SNR is improved and the imaging resolution is guaranteed compared with the conventional short-pulse method. From theoretical and experimental results, we show that the proposed method can suppress noise and improve imaging contrast, and can also be used to detect multiple defects in concrete.

Fabricating multifunctional polymeric nanofilm capable of resisting corrosion and activating copper surface by electrochemical and hydrolysis-condensation approach

A multifunctional polymeric nanofilm of triazinedithiolsilane monosodium salt, which can resist corrosion and activatecopper surface concurrently, was prepared by galvanostatic technique and the following hydrolysis-condensation approach.Electrochemical tests were carried out to evaluate the resistant ability of nanofilm. The changes of functional groups atop thenanofilms were monitored with Fourier transform infrared spectroscopy （FT-IR） and contact angles （CA） simultaneously. Thechemical composition and the morphology of the polymeric nanofilm were investigated by X-ray photoelectron spectroscopy （XPS）and scanning electron microscope （SEM）, respectively. The results reveal that the preferentially developed disulfide units protect thecopper during the whole preparation process, and the subsequently hydrolyzed nanofilms without/with heating shape into newinterface phases bearing the multifunctionality. This multifunctional interface （the polymeric nanofilm on copper surface） opens upthe possibilities for other OH-containing reagents to be anchored onto copper surface in demanding researches or industrialapplications.

Function of chloride intracellular channel 1 in gastric cancer cells

AIM:To investigate the effect of chloride intracellular channel 1(CLIC1) on the cell proliferation,apoptosis,migration and invasion of gastric cancer cells.METHODS:CLIC1 expression was evaluated in human gastric cancer cell lines SGC-7901 and MGC-803 by real time polymerase chain reaction(RT-PCR).Four segments of small interference RNA(siRNA) targeting CLIC1 mRNA and a no-sense control segment were designed by bioinformatics technology.CLIC1 siRNA was selected using Lipofectamine 2000 and transfected transiently into human gastric cancer SGC-7901 and MGC-803 cells.The transfected efficiency was observed under fluorescence microscope.After transfection,mRNA expression of CLIC1 was detected with RT-PCR and Western blotting was used to detect the protein expression.Proliferation was examined by methyl thiazolyl tetrazolium and apoptosis was detected with flow cytometry.Polycarbonate membrane transwell chamber and Matrigel were used for the detection of the changes of invasion and migration of the two cell lines.RESULTS:In gastric cancer cell lines SGC-7901 and MGC-803,CLIC1 was obviously expressed and CLIC1 siRNA could effectively suppress the expression of CLIC1 protein and mRNA.Proliferation of cells transfected with CLIC1 siRNA3 was enhanced notably,and the highest proliferation rate was 23.3%(P = 0.002) in SGC-7901 and 35.55%(P = 0.001) in MGC-803 cells at 48 h.The G2/M phase proportion increased,while G0/G1 and S phase proportions decreased.The apoptotic rate of the CLIC1 siRNA3 group obviously decreased in both SGC-7901 cells(62.24%,P = 0.000) and MGC-803 cells(52.67%,P = 0.004).Down-regulation of CLIC1 led to the inhibition of invasion and migration by 54.31%(P = 0.000) and 33.62%(P = 0.001) in SGC-7901 and 40.74%(P = 0.000) and 29.26%(P = 0.002) in MGC-803.However,there was no significant difference between the mock group cells and the negative control group cells.

Preparation and Characterization of Non-porous Superparamagnetic Microspheres with Epoxy Groups by Dispersion Polymerization

Non-porous superparamagnetic polymer microspheres with epoxy groups were prepared by dispersion polymerization of glycidyl methacrylate (GMA) in the presence of magnetic iron oxide (Fe3O4) nanoparticles coated with oleic acid. The polymerization was carried out in the ethanol/water medium using polyvinylpyrrolidone (PVP) and 2,2’-azobisisobutyronitrile (AIBN) as stabilizer and initiator, respectively. The magnetic microspheres obtained were characterized with scanning electron microscopy (SEM), vibrating sample magnetometry (VSM) and Fourier transform infrared spectroscopy (FTIR). The results showed that the magnetic microspheres had an average size of-1μm with superparamagnetic characteristics. The saturation magnetization was found to be 4.5emu.g-1. There was abundance of epoxy groups with density of 0.028 mmol·g^-1 in microspheres. The magnetic PGMA microspheres have extensive potential uses in magnetic bioseparation and biotechnology.

Feedforward Variable Structural Proportional-Integral-Derivative for Temperature Control of Polymerase Chain Reaction

To track the rapidly changing temperature profiles of thermal cycling of polymerase chain reaction （PCR） accurately, an innovative feedforward variable structural proportional-integral-derivative （FVSPID） controller was developed. Based on the step response test data of the heat block, a reduced first order model was estabfished at different operating points. Based on the reduced model, the FVSPID controller combined a feedforward path with the variable structural proportional-integral-derivative （PID） control. The modified feedforward action provided directly the optimal predictive power for the desired setpoint to speed up the dynamic response. To cooperate with the feedforward action, a variable structural PID was applied, where the P mode was used in the case of the largest errors to speed up response, whereas the PD mode was used in the case of larger errors to suppress overshoot, and finally the PID mode was applied for small error conditions to eliminate the steady state offset. Experimental results illustrated that compared to the conventional PID controller, the FVSPID controller can not only reduce the time taken to complete a standard PCR protocol, but also improve the accuracy of gene amplification.

A New Quenching Process and Tower to Improve the Recovery of Acrylonitrile

Quenching process and design of the quenching tower in acrylonitrile production in China were studied in order to decrease the polymerization loss of acrylonitrile in the quenching tower. Based on the research of acrylonitrile polymerization in the quenching tower, a new quenching process was proposed to avoid the disadvantages of the original process. Two kinds of internals were installed to improve the performance of the quenching tower. Through a series of air-flow and real-flow model experiments, the new quenching process and new design were showed to be successful in enhancing the mass and heat transfer in the vapor-liquid system and decreasing the loss of acrylonitrile.Industrial application showed satisfactory results of decrease of the acrylonitrile loss in the quenching tower by about 4.5% and increase of the acrylonitrile recovery of the whole plant by more than 4%.

Molecular Imprinted Membrane with High Flux by Surface Photo-grafting Copolymerization

Molecular imprinted polymer membranes (MIM) combine the merits of molecular imprint and membrane technology. In this work, a very thin of imprinted polymer that can specifically and selectively absorb the basic template (adenine) was grafted on the surface of polyvinylidene fluoride membrane by photo-grafting copolymerization. Because the molecular imprinted polymer is grafted on the surface of the matrix membrane without blocking the membrane pores, the resultant MIMs have high flux as microfiltration membrane (0.26 mol·m^-2·h^-1 of template and flux for distilled water was 3.6 ml·mim^-1·cm^-2 at 0.8 MPa). Moreover, the MIMs can absorb/desorb template molecules rapidly. Usually, it only takes several minutes for MIMs to absorb more than 75% of the template (adenine) in aqueous solution. And the influences of the type and amount of the functional monomers, the amount of the cross-linker on the absorption capability are discussed to determine the optimal preparation conditions。

Overview on Environmental Comprehensive Management System Established in Imitation of Biome

Environmental comprehensive management system, called “the bionic community”, can be established in imitation of biome, which can transform the wastes generated in a certain field into the raw materials of other field. The establishment of the bionic community includes two aspects, i.e., the matching technique and the management system. The main matching technique is the preparation of composite materials made of various wastes. This new kind of material can be divided into four types: polymer matrix, silicate matrix, metal matrix and carbon matrix(or ceramic matrix). The environmental comprehensive management system is formed by organizing a trans-trades joint-management business entity with the products of composite material made of wastes at the core.

PREPARATION OF POLYELECTROLYTE MULTILAYER COATED MICROBUBBLES FOR USE AS ULTRASOUND CONTRAST AGENT

Objeelive To prepare and characterize polyelectrolyte multilayer film coated microbubbles for use as ultrasound contrast agent （UCA） and evaluate its effects in ultrasonic imaging on normal rabbit＇s fiver parenchyma. Methods Perfluorocarbon （PFC）-containing microbubbles （ST68-PFC） were prepared by sonication based on suffactant （ Span 60 and Tween 80）. Subsequently, the resulting ST68-PFC microbubbles were coated using oppositely charged polyelectrolytes by microbubble-templated layer-by-layer self-assembly technique via electrostatic interaction. The enhancement effects in ultrasonic imaging on normal rabbit＇s liver parenchyma were assessed. Results The obtained microbubbles exhibited a narrow size distribution. The polyelectrolytes were successfully assembled onto the surface of ST68-PFC microbubbles. In vivo experiment showed that polyelectrolyte multilayer film coated UCA effectively enhanced the imaging of rabbit＇s liver parenchyma. Conclusions The novel microbubbles UCA coated with polyelectrolyte multilayer, when enabled more function, has no obvious difference in enhancement effects compared with the pre-modified microbubbles. The polymers with chemically active groups （ such as amino group and carboxyl group） can be used as the outermost layer for attachment of targeting ligands onto microbubbles, allowing selective targeting of the microbubbles to combine with desired sites.

Pyrolysis Process in Aramid Fibers Investigated by Py-GC/MS & TGA-DTA/MS

Poly （ m-phenylene isophthalamine） （PMIA） and Poly（ p-phenylene terphthalamine） （PPTA） are among the most important high-temperature resistant aramid fibers. The pyrolysis behaviors of these two fibers under inert gases were studied using pyrolysis-gas chromatography/mass spectrometry （Py-GC/MS） and thermogravimetric analysis coupled with mass spectrometry （ TGA-DTA/MS ）. The pyrolysis processes of PMIA and PPTA are distinguishing, and the stepwise pyrolysates reflect these differences. A mechanism system of pyrolysis is suggested, which involving hydrolysis and homolysis, At low pyrolysis temperatures, hydrolysis is a primary reaction, and it is very noticeable in the first-step pyrolysis region of PMIA. Elevating pyrolysis temperature, homolysis is enhanced and keep a large advantage in the high temperature range. On the other hand, at higher temperatures, carbonization happens and the homolysis and carbonization of PPTA are emphasized more than of PMIA.

DIFFERENTIATION OF PSEUDOCONDYLOMA OF VULVA AND CONDYLOMA ACUMINATA BY DOT BLOT HYBRIDIZATION AND POLYMERASE CHAIN REACTION

This study differentiated pseudocondyloma of vulva from condyloma acuminata using dot blot hybridization and polymerase chain reaction (PCR). A total of 27 cases of pseudocondyloma of vulva and 65 cases of condyloma acuminata were selected for the study. The genital lesions were examined clinically and were biopsied. Each biopsy was subjected to histological examination and HPV DNA analysis by dot blot hybridization and PCR. Dot blot analysis detected HPV DNA in 19(82. 6%) out of 23 cases of condyloma acuminata and 2(25% ) out of 8 cases pseudocondyloma of vulvae (P<0. 05). PCR detected HPV DNA in 51 (92. 7%) out of 55 cases of condyloma acuminata , compared with none in 23 cases of pseudocondyloma (P<0.001 ). HPV DNA was present in the majority of condyloma acuminata specimens. HPV 6 and 11 were the predominant types. Peudocondyloma is probably not associated with HPV. PCR was the most sensitive and useful technique for HPV DNA detection.

High dose glargine alters the expression profiles of microRNAs in pancreatic cancer cells

AIM: To investigate the effect of high dose glargine on the expression profiles of microRNAs in human pancreatic cancer cells. METHODS: Real-time polymerase chain reaction array (RT-PCR) was applied to investigate miRNAs differentially expressed in Sw1990 cells treated with or without 100 IU/L glargine. Stem-loop RT-PCR was used to confirm the results of the array assay in Sw1990 and Panc-1 cells. The effects of miR-95 on cell growth, apoptosis, invasion and migration abilities were respectively examined by CCK8 assay, apoptosis assay, Matrigel invasion and migration assay in Sw1990 and Panc-1 cells. Nude mice xenograft models with Sw1990 cells were built to investigate pancreatic cancer growth in vivo after transfection by the lentivirus pGLV3-GFP-miR-95. RESULTS: Ten miRNAs were significantly up-regulated and 2 miRNAs down-regulated in glargine treated Sw1990 cells when compared with non-treated cells (2.48-fold changes on average, P < 0.01). miR-95, miR-134 and miR-34c-3p are the top three miRNAs regulated by glargine (3.65-fold, 2.67-fold and 2.60-fold changes respectively, P < 0.01) in Sw1990 cells. Stem-loop RT-PCR confirmed that high dose glargine up-regulated the expression of miR-95 and miR-134 in both Sw1990 and Panc-1 cells. The most obvious change is the apparent increase of miR-95. Forced expression of miR-95 significantly increased cell proliferation (Sw1990: 2.510 ± 0.129 vs 2.305 ± 0.187, P < 0.05; Panc-1: 2.439 ± 0.211 vs 2.264 ± 0.117, P < 0.05), invasion (Sw1990: 67.90 ± 12.33 vs 47.30 ± 5.89, P < 0.01; Panc-1: 37.80 ± 8.93 vs 30.20 ± 5.14, P < 0.01), migration (Sw1990: 101 ± 6.00 vs 51.20 ± 8.34, P < 0.01; Panc-1: 91.80 ± 9.22 vs 81.50 ± 7.47, P < 0.01) and inhibited cell apoptosis (Sw1990: 22.05% ± 1.92% vs 40.32% ± 1.93%, P < 0.05; Panc-1: 20.17% ± 0.85% vs 45.60% ± 1.43%, P < 0.05) when compared with paired negative controls, whereas knockdown of miR-95 obtained the opposite effect. Nude mice xenograft models confirmed that miR-95 promoted the growth of pancreatic cancer in vivo when compared with negative control (tumor volume: 373.82 ± 23.67 mLvs 219.69 ± 17.82 mL,P < 0.05). CONCLUSION: These observations suggested that mod- ulation of miRNA expression may be an important mechanism underlying the biological effects of glargine.

Preparation and mechanical properties of polypropylene fiber reinforced calcined kaolin-fly ash based geopolymer

To improve the environmental benefits and solve the problems of large shrinkage and high brittleness, the partial replacement of calcined kaolin by fly ash as a raw material for geopolymer synthesis and the influences of polypropylene (PP) fiber on the mechanical properties and volume stability were investigated. The results show that compressive strength of the geopolymer containing 33.3%(mass fraction) fly ash by steam curing at 80 ℃ for 6 d is improved by 35.5%. The 3-day compressive strength, flexural strength and impacting energy of geopolymers containing 0.05%PP fiber increase by 67.8%, 36.1% and 6.25%, while the shrinkage and modulus of compressibility decrease by 38.6% and 31.3%, respectively. The results of scanning electron microscopy (SEM) and the appearances of crack growths confirm that PP fiber can offer a bridging effect over the harmful pores and defects and change the expanding ways of cracks, resulting in a great improvement of strength and toughness.

Properties of Nanokaolin and Its Rubber Composites

A kind of nanokaolin powder with a thickness of 20-50nm and an average diameter of 300nm is produced through combined procedure of purification, delamination, surface modification and pulverization. The application experiments in butadiene rubber (BR), ethylene-propylene diene methylene (EPDM), and natural rubber (NR) indicates that this nano-kaolin powder material is much better than precipitated silica in reinforcement, while in styrene-butadiene rubber (SBR) it is close to precipitated silica. Nanokaolin is of superiority in elasticity, elongation at break, anti-flexure property.

Down-regulation of STAT3 expression by vector-based small interfering RNA inhibits pancreatic cancer growth

AIM:To evaluate the effect of RNA interference (RNAi) mediated silence of signal transduction and activation of transcription (STAT)3 on the growth of human pancreatic cancer cells both in vitro and in vivo.METHODS:STAT3 specific shRNA was used to silence the expression of STAT3 in pancreatic cancer cell line SW1990.The anti-growth effects of RNAi against STAT3 were studied in vitro and in experimental cancer xenografts in nude mice.The potential pathways involved in STAT3 signaling were detected using reverse transcription polymerase chain reaction and western blotting.RESULTS:The expression of the STAT3 was inhibited using RNAi in SW1990 cells.RNAi against STAT3 inhibited cell proliferation,induced cell apoptosis and significantly reduced the levels of CyclinD1 and Bcl-xL when compared with parental and control vector-transfected cells.In vivo experiments showed that RNAi against STAT3 inhibited the tumorigenicity of SW1990 cells and significantly suppressed tumor growth when it was directly injected into tumors.CONCLUSION:STAT3 signaling pathway plays an important role in the progression of pancreatic cancer,and silence of STAT3 gene using RNAi technique may be a novel therapeutic option for treatment of pancreatic cancer.

License Assisted Access-WiFi Coexistence with TXOP Backoff for LTE in Unlicensed Band

License assisted access(LAA) was proposed as a solution to the challenge of satisfying high throughput requirement in cellular network with limited licensed band. LAA uses long term evolution(LTE) carrier aggregation technique to combine licensed and unlicensed bands, specifically 5 GHz Wi Fi band, in order to achieve high data rates. However, LAA has several critical concerns for services provision on 5 GHz unlicensed band. In this article, an overview of the techniques concerning the coexistence of LTE and Wi Fi on the same unlicensed band is presented. We first present several general approaches including power control of LTE evolved Node B(e NB), carrier selection, LTE duty cycling, self clear to send(CTS) and request to send/CTS(RTS/CTS), and listen before talk(LBT). Then, we focus on LBT techniques for LAA-Wi Fi coexistence and discuss how LBT based coexistence solutions can dynamically respond to the variations in network load and ensure fair coexistence in a distributed manner. Based on the LBT mechanism, we also present a fairness-aware LAA-WiF i coexisting scheme with TXOP(transmitted in a single transmission opportunity) backoff for LAA e NB. Finally, the performances of various LBT solutions for LAA-Wi Fi coexistence are evaluated using Markov chain analytical model.

Enhanced permeation performance of polyether-polyamide block copolymer membranes through incorporating ZIF-8 nanocrystals

Membrane-based CO_2 separation is a promising alternative in terms of energy and environmental issues to other conventional techniques. Polyether-polyamide block copolymer(Pebax) membranes are promising for CO_2 separation because of their excellent selectivity, but limited by their moderate gas permeability. In this study,fresh-prepared zeolitic imidazolate framework-8(ZIF-8) nanocrystals were integrated into the Pebax?1657matrices to form mixed matrix membranes. The resulting membrane exhibits significantly improved CO_2permeability(as high as 300% increase), without the sacrifice of the selectivity, to the pristine polymer membrane. Several physical characterization techniques were employed to confirm the good interfacial interaction between ZIF-8 fillers and Pebax matrices. The effect of added ZIF-8 fillers on the transport mechanism through MMMs is also explored. Mixed-gas permeation for both CO_2/N_2 and CO_2/CH_4 was also evaluated. The separation performance for CO_2/CH_4 mixtures on the ZIF-8/Pebax MMMs is very close to the Roberson upper bound, and thus is technologically attractive for purification of natural gas.

Modeling of Pervaporation Separation Benzene from Dilute Aqueous Solutions Through Polydimethylsiloxane Membranes

A modified solution-diffusion model was established based on Flory-Huggins thermodynamic theory and Fujita's free volume theory. This model was used for description of the mass transfer of removal benzene from dilute aqueous solutions through polydimethylsiloxane (PDMS) membranes. The effect of component concentration on the interaction parameter between components, that of the polymer membrane on the selectivity to benzene, and that of feed concentration and temperature on the permeation flux and separation factor of benzene/water through PDMS membranes were investigated. Calculated pervaporation fluxes of benzene and water were compared with the experimental results and were in good agreement with the experimental data.

Built-up Effect of Core Material for Microencapsulated Flame Retardant Containing Dimethyl Methyl Phosphate

The flame retardants containing organophosphorus compounds have extensively been used in the flame retarding of polymer materials. Among others, dimethyl methyl phosphate (DMMP) was applied in flame retarding of polyurethane owing to its so much merit. However, the water-soluble property of DMMP restricted its application in textile fabric. The flame retarding system containing DMMP will be microencapsulated to form a novel flame retardant that could be used in textiles. We have studied the built–up effect of DMMP with some inorganic compounds to improve the afterflame and afterglow suppression in the flame retarding system. The experimental data indicated that inorganic compounds containing various non-metal elements P, N, B and metal ions Mg2+, Al3+, Ca2+, Zn2+, Cu2+, Mn4+ could be applied in flame retarding systems as additives to effectively suppress afterflame or afterglow.