新能源汽车“换电”模式的实施效果及发展建议——基于珠海“WL”汽车的消费者调查

随着我国“双碳”政策的持续推行,国家大力支持新能源汽车发展,加速汽车行业转型升级,降低污染排放,使得新能源汽车的市场需求不断提高,其中补能是新能源汽车能否长远发展的核心问题。当前,我国的主要补能方式仍然是“充电”,然而该模式已无法充分满足广大车主快速补能续航、减少排队等待时间等需求。因此,推动新能源汽车“换电”模式创新发展呼声不断,不仅得到了政府相关部门的支持,还对新能源汽车自身业务赋能和战略发展、出行便捷等提供了有效渠道。为了探究“换电”模式的实施效果和未来发展前景,本文基于新能源汽车头部企业“WL”公司的消费用户问卷调查结果,结合实地调研与文献比较,分析了珠海市“换电”模式的运行现状、消费者使用评价和该模式存在的主要问题,并提出了提升技术水平以提高换电安全性、持续探索电池换电标准化、推进全方位换电商业模式和完善预约服务体系等政策建议,以供参考。

A Current-Mode DC-DC Buck Converter with High Stability and Fast Dynamic Response

A current-mode DC-DC buck converter with high stability is presented. The loop gain＇s expression of the current-mode converter is derived by employing an advanced model of a current-mode control converter. After analyzing the loop gain＇s expression, which illustrates the method of selecting suitable frequency compensation for the control loop,a novel pole-zero tracking frequency compensation is proposed. Based on theoretical analysis, a DC-DC buck converter with high stability is designed with 0.5μm-CMOS technology. The simulated results reveal that the stability of the converter is independent of the load current and the input voltage. Moreover,the converter provides a full load transient response setting time of less than 5μs and overshoots and undershoots of less than 30mV.

Strongly Gain Coupled DFB Laser Monolithically Integrated with a Self Alignment Spot Size Converter

A new type strongly gain coupled (GC) DFB laser and a new type self alignment spot size converter (SA SSC) are proposed and successfully fabricated.The strongly GC DFB laser is monolithically integrated with the SA SSC with three step epitaxies.A high single mode yield and large side mode suppression ratio is obtained from the strongly GC DFB laser.A near circle far field pattern is obtained by using the SA SSC.

Supersymmetric Sawada-Kotera-Ramani Equation: Bilinear Approach

In this paper, using the Hirota＇s bilineax method, we consider the N = 1 supersymmetric Sawada-Kotera- Ramani equation and obtain the Bazcklund transformation of it. Its one- and two-supersoliton solutions axe obtained and N-supersoliton solutions for N ≥ 3 are given under the condition kiξj = kjξi.

Study on switched reluctance generator

The linear and non-linear math models of the switched reluctance generator (SRG) in generator mode were established in this work. The phase current and energy conversion process during generator operation were simulated by the linear math model. The non-linear math model was used to analyze the characteristics of the SRG operation in self-excitation mode and in separately-excitation mode. Some important findings on how the SRG is operated and controlled were obtained in this study, which provides theoretical basis for further design and experimental study.

Illumination system with compound parabolic retro-reflector for single LCOS panel projection display

In this paper, a new illumination system with ultra high performance (UHP) lamp is proposed for projection display. Parabolic reflector (PR) and compound parabolic retro-reflector (CPR) were jointly used to collect and collimate the light generated from UHP lamp. A polarization converter system (PCS) was used to increase the light efficiency of the projection display system. A beam transformer between PCS and 2f imaging systems was directly used to make the illumination meet the requirement of projection display system. With the consideration of the loss of reflection, the light efficiency in this projection display system was estimated to be 15.6%.

Soliton, Positon and Negaton Solutions of Extended KdV Equation

Darboux transformation （DT） provides us with a comprehensive approach to construct the exact and explicit solutions to the negative extended KdV （eKdV） equation, by which some new solutions such as singular soliton, negaton, and positon solutions are computed for the eKdV equation. We rediscover the soliton solution with finiteamplitude in [A.V. Slyunyaev and E.N. Pelinovskii, J. Exp. Theor. Phys. 89 （1999） 173] and discuss the difference between this soliton and the singular soliton. We clarify the relationship between the exact solutions of the eKdV equation and the spectral parameter. Moreover, the interactions of singular two solitons, positon and negaton, positon and soliton, and two positons are studied in detail.

A Magnetron Power Supply with Transition-Mode Zero-Voltage-Switching Inverter

This paper presents a transition-mode zero-voltage-switching inverter for the cooker magnetron of household microwave ovens. The inverter drives a leakage transformer to generate the required high voltage and stabilized current. For achieving zero-voltage switching, a transition-mode driver L6561 is utilized to detect the ending of transformer resonance and drive an insulated-gate-bipolar-transistor. As transistor is conducted, rectified direct-current voltage drives the transformer. While transistor is cut off, transformer resonates with a parallel capacitor. Transistor conduction time and magnetron power are controlled with a 16-bit digital signal controller dsPIC30F4011. For widening the working range, transistor conduction time is set to be inversely changed with line-frequency input voltage. To demonstrate the analysis and design of this paper, a 1 kW inverter circuit is built. Experimental results show the feasibility and usefulness of the designed magnetron power supply.

Research on EV Battery Swapping System and Standards Requirements

Combined with the perspective of State Grid Corporation of China （SGCC）, the paper researches the EV battery swapping mode and its advantages, analyses standards requirements of battery swapping system and proposes the corresponding standards system

Loop Compensator Design for DCM Peak-Current-Mode Control DC-DC Buckboost Converter

An analytic closed-form based loop compensator for direct current-direct current （DC-DC） buckboost converter in discontinuous conduction with peak current-mode control is proposed to increase efficiency of the desired process through systemization. As a result, the process saves a lot of computation time that can be translated into design cost savings. Finally, the output voltage regulation in the presence of audio susceptibility and output impedance is shown for verifying.

Reliability Comparison of MPPT Converter in DCM and CCM Operation

The reliability plays an important role in power electronic systems by which the number of system failures, repair costs, guarantee and etc. are estimated. In this paper first, a boost Maximum Power Point Tracker （MPPT） converter is simulated in Discontinues Conduction Mode （DCM） and Continuous Conduction Mode （CCM） under different output power ratings. For these simulations, all of the inherent parameters of MOSFET and diodes are applied according to the actual types. Then, reliability calculation is done based on MIL-HDBK-217 handbook. Results have shown that the MPPT converter would have better performance from reliability point of view in CCM operating mode.

A New Zero-Voltage Transition Power Factor Corrected Single-Phase Single-Stage AC-to-DC Converter

This paper presents a new ZVT （zero-voltage transition） single-stage ac-to-dc converter using PWM （pulse width modulation） and HF （high frequency） transformer isolation with capacitive output filter. In this converter a front-end power factor corrected boost stage integrates with a cascaded dc-to-dc bridge HF converter. The front-end boost converter operates in discontinuous current mode and ensures natural power factor correction with very simple control. The auxiliary circuit of this topology deals with very small power and is placed out of the main power path. As a result, the auxiliary circuit components have smaller power rating as opposed to main converter components. Also, output rectifier voltage is clamped to output voltage due to capacitive output filter. Identification and analyses of different operating modes of this converter are presented. Based on these analyses design example of a 50 kHz, 48 V, 1 kW ac-to-dc converter is presented. PSPICE simulation results of the designed converter are presented and explained to verify the performance of this converter.

Research on Electric Drive for Small Vehicles

This paper presents an electric drive system whose motor is connected to a battery by means of a buck DC/DC converter. This motor is further connected to an ultracapacitor by means of a boost DC/DC converter. First, operation and break processes are studied when the converters are switched off as well as when they are switched on in current limitation mode. Then, a comparative analysis of the results in the two operation modes is done.

Magnetization switching modes in nanopillar spin valve under the external field

The current-induced magnetic switching is studied in Co/Cu/Co nanopillar with an in-plane magnetization traversed under the perpendicular-to-plane external field.Magnetization switching is found to take place when the current density exceeds a threshold.By analyzing precessional trajectories,evolutions of domain walls and magnetization switching times under the perpendicular magnetic field,there are two different magnetization switching modes:nucleation and domain wall motion reversal;uniform magnetization reversal.The first mode occurs at lower current density,which is realized by the formation of the reversal nucleus and domain wall motion;while the second mode occurs through complete magnetization reversal at higher current density.Furthermore,the switching time reduces as the spin-polarized current density increases,which can also be grouped into two reversal modes.