职专数学教学谈

本文主要介绍在职专数学教学中的做法和体会。

Die design for cold precision forging of bevel gear based on finite element method

The finite element analysis （FEA） software Ansys was employed to study the stress state of the dies of both plane and non-plane parting face structures with uniform interference and the die of plane parting face structure with non-uniform interference. Considering the symmetry of the die, a half gear tooth model of the two-ring assembled die with 2.5 GPa inner pressure was constructed. Four paths were defined to investigate the stress state at the bottom comer of the die where stress concentration was serious. FEA results show that the change of parting face from non-plane to plane can greatly reduce the stress at the teeth tips of the die so that the tip fracture is avoided. The interference structure of the die is the most important influencing factor for the stress concentration at the bottom comer. When non-uniform interference is adopted the first principal stress at the comer on the defined paths of the die is much lower than that with uniform interference. The bottom hole radius is another important influencing factor for the comer stress concentration. The first principal stress at the comer of the plane parting face die with non-uniform interference is reduced from 2.3 to 1.9 GPa when the hole radius increases from 12.5 to 16.0 mm. The optimization of the die structure increases the life of the die from 100 to 6 000 hits.

Analysis of International Migrant Workers： Case Study of Worker of Madura Origin

As international migrant workers, they should equip themselves with appropriate knowledge and skills to compete with other overseas workers in the global job market. This means that international migrant workers need to improve their quality and ability. In addition, it also requires a high work and motivation to produce a satisfactory performance. Capabilities like cognitive, affective, and psychomotor abilities are needed to support performance Information related to three abilities also motivation is important from international migrant workers from the island of Madura to be analyzed. Based on the results of qualitative research using interview technique and observation on three informants who had worked abroad as nursing, baby sitter, and housekeeper whose data validity of interview result is measured using triangulation method, it shows different ability in working on his job （though having the same motivation） resulted different performance. Low performance due to lack of ability in cognitive, affective, and psychomotor aspects resulted in workers who could not compete with other workers. The evidence came from the lack of contract extension for low-performing workers. It is therefore recommended for prospective international migrant workers to equip themselves with sufficient capacity through trainings undertaken by government training center （Balai Latihan Kerja/BLK）

The Effects of Land Use and Landscape Position on Labile Organic Carbon and Carbon Management Index in Red Soil Hilly Region,Southern China

Labile organic carbon （LOC） and carbon management index （CMI）, which are sensitive factors to the changes of environment, can improve evaluating the effect of land management practices changes on soil quality. The objective of this study was to investigate the effects of land use types and landscape positions on soil quality as a function of L0C and CMI. A field study in a small watershed in the red soil hilly region of southern China was conducted, and soil samples were collected from four typical lands （pine forest （PF） on slope land, barren hill （BH） on slope land, citrus orchard （C0） on terrace land and Cinnarnornum Camphora （CC） on terrace land） at a sampling depth of 20 cm. Soil nutrients, soil organic carbon （SOC）, L0C and CMI were measured. Results showed that the L0C and CMI correlated to not only soil carbon but also soil nutrients, and the values of LOC and CMI in different land use types followed the order CC 〉 PF 〉 CO 〉 BH at the upper- slope, while CO 〉 CC 〉 BH 〉 PF at mid-slope and down-slope. With respect to slope positions, the values of LOC and CMI in all the lands were followed the order： upper-slope 〉 down-slope 〉 mid- slope. As whole, the mean values of LOC and CMI in different lands followed the order CC 〉 CO 〉 PF 〉 BH. High CMI and LOC content were found in the terrace lands with broadleaf vegetations. These results indicated that the terracing and appropriate vegetations can increase the carbon input and lability and decrease soil erosion. However, the carbon pools and CMI in these lands were significantly lower than that in reference site. This suggested that it may require a long time for the soil to return to a high~ quality. Consequently, it is an efficient way to adopt the measures of terracing and appropriate vegetations planting in improving the content of LOC and CMI and controlling water and soil loss in fragile ecosystems.

Direct Urca Processes with Hyperon-Hyperon Interactions

With a weak hyperon-hyperon （YY） interaction deduced from the new experimental data of AA potential, this paper has performed a calculation of the direct Urca （DURCA） processes in the framework of the relativistic mean field theory （RMFT） including σ＊ and φ mesons, in comparison with the results calculated with the strong YY interaction and with no （σ＊ ,φ ） mesons included. In neutron star matter, the weak YY interaction supplies the additional repulsive interaction between hyperons while the strong YY interaction supplies the attractive one. With the weak YY interaction, the effective masses of hyperons are larger than those with the strong YY interaction while smaller than those with no （σ＊ ,φ） mesons included. The threshold star masses for the DURCA processes involving nucleons and A are not sensitive to the strength of the YY interaction. The weak YY interaction leads to larger threshold masses for the DURCA process involving [1]1 and [1]0 than the other two cases. The process involving [1]0 can take place in the neutron star only when the weak YY interaction is used. The weak YY interaction is able to bring in the agreement with the observation of the neutron star with larger mass and faster cooling than the strong YY interaction.

Empirical Study on the Measurement of the High-Tech Industry Efficiency in China--Based on the Data of China＇s 31 Provinces （Including Municipalities and Autonomous Regions）

To evaluate the relative effectiveness of the input and output of the high-tech industry in China＇s 31 provinces （including municipalities and autonomous regions）, DEA evaluation model was constructed using data envelopment analysis （DEA）, and DEA evaluation model was solved using Deap2.1 software, for the purpose of obtaining the DEA efficiency and the non-DEA efficiency in all the provinces （including municipalities and autonomous regions）. Then, the comprehensive efficiency, technical efficiency, scale efficiency, scale return, and projection analysis were analyzed. Finally, the provinces of the non-DEA efficiency are sorted according to three efficiencies, and also a goal of improvement is proposed for the purpose of expanding technology investment in the provinces of the DEA efficiency.

Determination of a U-Notch Stress Concentration Factor Using Thermoelasticity

This paper uses the TSA （therrnoelastic stress analysis） technique to determine the stress concentration factor （Kt） of a U-notch in an aluminum plate, and then compares the results with those obtained from a FEA （finite elements analysis） of the same specimen. In order to do so, it devises a calculation procedure to extrapolate the thermoelastic data near the tip of the notch and then applies the resulting algorithm to seven distinct experiments that had different loading frequencies, mean loads and load ranges. The overall positive results suggest that the technique may be suitable for Kt measurements in real-world structures. A discussion about the calibration factor of the thermoelastic data is included by confronting the calibration results using independent tensile uniaxial tests and using the U-notch TSA and FEA paired specimen data.

A NOTE ON THE NESTEDNESS PROPERTY FOR ORDERED MEDIAN PROBLEMS IN TREE NETWORKS

The nestedness property has become an increasingly important means for devising efficient algorithms for network location problems.There have been attempts to explore the nestedness property of network location problems with some special cases of the convex ordered median objectives.However,there is little research on the nestedness property for those problems with the concave ordered median objectives.This paper constructs a tree network T and shows that the nestedness property cannot hold for the concave ordered median problem,which fills a gap in the research on the nestedness property.Finally,the authors pose an open problem on identifying the nestedness property for the continuous strategic ordered median problem.

Corrected-loss estimation for Error-in-Variable partially linear model

We consider an Error-in-Variable partially linear model where the covariates of linear part are measured with error which follows a normal distribution with a known covariance matrix. We propose a corrected-loss estimation of the covariate effect. The proposed estimator is asymptotically normal. Simulation studies are presented to show that the proposed method performs well with finite samples, and the proposed method is applied to a real data set.