“数理设计” 中国古代建筑设计理论与方法初探

有辉煌成就的出国古代建筑，有没有设计理论?这是极少讨论和没有回答的问题。有人说：“中国古代建房只是师傅传徒弟，根本没有设计或理论”。或者说：“建筑设计理论在古代根本不受重视”．事实如何呢?试想一下像长安城．故宫，

Adaptive polarization i mage fusion based on regional energy dynamic weighted average

According to the principle of polarization imaging and the relation between Stokes parameters and the degree of linear polarization, there are much redundant and complementary information in polarized images. Since man-made objects and natural objects can be easily distinguished in images of degree of linear polarization and images of Stokes parameters contain rich detailed information of the scene, the clutters in the images can be removed efficiently while the detailed information can be maintained by combining these images. An algorithm of adaptive polarization image fusion based on regional energy dynamic weighted average is proposed in this paper to combine these images. Through an experiment and simulations,most clutters are removed by this algorithm. The fusion method is used for different light conditions in simulation, and the influence of lighting conditions on the fusion results is analyzed.

Automatic relational database compression scheme design based on swarm evolution

Compression is an intuitive way to boost the performance of a database system. However, compared with other physical database design techniques, compression consumes large amount of CPU power. There is a trade-off between the re- duction of disk access and the overhead of CPU processing. Automatic design and adaptive administration of database systems are widely demanded, and the automatic selection of compression schema to compromise the trade-off is very important. In this paper, we present a model with novel techniques to integrate a rapidly convergent agent-based evolution framework, i.e. the SWAF (SWarm Algorithm Framework), into adaptive attribute compression for relational database. The model evolutionally consults statistics of CPU load and IO bandwidth to select compression schemas considering both aspects of the trade-off. We have im- plemented a prototype model on Oscar RDBMS with experiments highlighting the correctness and efficiency of our techniques.

A version management model of PDM system and its realization

Based on the key function of version management in PDM system, this paper discusses the function and the realization of version management and the transitions of version states with a workflow. A directed aeyclic graph is used to describe a version model. Three storage modes of the directed acyelic graph version model in the database, the bumping block and the PDM working memory are presented and the conversion principle of these three modes is given. The study indicates that building a dynamic product structure configuration model based on versions is the key to resolve the problem. Thus a version model of single product object is built. Then the version management model in product structure configuration is built and the application of version management of PDM syster is presented as a case.

Study on How to Design Knitted Fabric Pattern with Mathematical Theory

To improve design capabilities for the knitted fabric pattern,a preliminary study is carried out for the design method.Based on mathematical theory,pattern could be created automatically by computer with inputting different parameters for mathematical functions.The knitted fabric simulation is realized by M1 CAD pattern preparation system of STOLL Company.In the pattern,different color unit is replaced by obverse stitch with different color,or by obverse stitch and reverse stitch with the same color separately,after that the effects of knitted fabrics could be simulated.Designing with this method,it would not only help to acquire a great of diversity patterns,but also improve design efficiency and save cost.

A Survey on Information-Centric Networking: Rationales, Designs and Debates

The basic function of the Internet is to delivery data(what) to serve the needs of all applications. IP names the attachment points(where) to facilitate ubiquitous interconnectivity as the current way to deliver data. The fundamental mismatch between data delivery and naming attachment points leads to a lot of challenges, e.g., mapping from data name to IP address, handling dynamics of underlying topology, scaling up the data distribution, and securing communication, etc. Informationcentric networking(ICN) is proposed to shift the focus of communication paradigm from where to what, by making the named data the first-class citizen in the network, The basic consensus of ICN is to name the data independent from its container(space dimension) and session(time dimension), which breaks the limitation of point-to-point IP semantic. It scales up data distribution by utilizing available resources, and facilitates communication to fit diverse connectivity and heterogeneous networks. However, there are only a few consensuses on the detailed design of ICN, and quite a few different ICN architectures are proposed. This paper reveals the rationales of ICN from the perspective of the Internet evolution, surveys different design choices, and discusses on two debatable topics in ICN, i.e.,self-certifying versus hierarchical names, and edge versus pervasive caching. We hope this survey helps clarify some mis-understandings on ICN and achieve more consensuses.

A structural design of multilevel decomposition and domain mapping

An integrated optimization design was described using multilevel decomposition technique on the base of the parametric distribution and independent axiom at the stages of lower level. Based on Pareto optimum solution, the detailed parameters at lower level can be defined into the independent axiom. The suspension design was used as the simulation example. In an axiomatic design for the optimization design, the uncoupled and decoupled designs between functional requirements and design parameters are generally needed. But using the design sensitivity(or screening) of design parameters, the approximate uncoupled design is developed on behalf of the decoupled and coupled designs. Successive design parameters were applied to the suspension of torsion beam axle. The structural performance increases by 18%. The kinematic and compliance performance increases by 6% within the feasible ranges.

Oil–water pre-separation with a novel axial hydrocyclone

A novel hydrocyclone with guide vanes, named as axial hydrocyclone(AHC), is designed to tackle the problem of oil–water separation faced by most mature oilfields. Optimal design of the AHC is carried out by using numerical methods. The effects of guide vanes, cone angle, tapered angle and overflow pipe on the oil–water separation are discussed in this paper. The results show that a double swirling flow is generated in the tapered section where oil–water separation occurs. Both the cylindrical and the tapered section have important influences on AHC performance. On the basis of single factor results, response surface methodology is employed to optimize the AHC design. The experimental results indicate that the novel AHC has an excellent performance for the oil–water separation.

A New Elliptical Cross-Section Mathematical Model of Woven Fabric Based on Jacobian Transformation

In order to give a true reflection of the spatial structure of woven fabric, a circular mathematical model is established based on the Peirce＇s model and the principle of the coordinate transformation. The circular model uses arcs and tangent lines as the yarn flexion shape and selects the circle as the yarn cross-section. Then, a new elliptical cross-section mathematical model is rapidly built by the Jaeobian transformation of the circular model. The Matiab software is used for the 3D simulation. It is shown that 3D simulations of woven fabrics with different weft and warp yarn counts, weft and warp densities, structure phases, weaves and flattening coefficients are successfully realized by Matiab basing on the elliptical mathematical model.

DATA BYPASSING ARCHITECTURE AND CIRCUIT DESIGN FOR 32-BIT DIGITAL SIGNAL PROCESSOR

This paper presents a design method of ByPassing Unit(BPU) in 32-bit Digital Signal Processor(DSP)-MD32. MD32 is realized in 0,18μm technology, 1.8V and 200 MHz working clock. It focuses on the Reduced Instruction Set Computer(RISC) architecture and DSP computation capability thoroughly, extends DSP with various addressing modes in a customized DSP pipeline stage architecture. The paper also discusses the architecture and circuit design of bypassing logic to fit MD32 architecture. The parallel execution of BPU with instruction decode in architecture level is applied to reduce time delay. The optimization of circuit that serial select with priority is analyzed in detail, and the result shows that about half of time delay is reduced after this optimization. Examples show that BPU is useful for improving the DSP's performance.The forwarding logic in MD32 realizes 8 data channels feedback and meets the working clock limit.

Analysis of key technologies and development of integrated digital processing system for cast blasting design

Casting blast can greatly reduce the stripping cost and improve the production capacity of opencast coal mines. Key technologies including high bench blasting, inclined hole, millisecond blasting, pre-splitting blasting and casting blast parameters determination which have influence on the effect of casting blast have been researched with the combination of the ballistic theory and experience in mines. The integrated digital processing system of casting blast was developed in order to simplify the design process of casting blast, improve working efficiency and veracity of design result and comprehensively adopt the software programming method and the theory of casting blast. This system has achieved five functions, namely, the 3D visualization graphics management, the intelligent management of geological information, the intelligent design of casting blast, the analysis and prediction of the blasting effect and the automatic output of the design results. Long-term application in opencast coal mines has shown that research results can not only reduce the specific explosive consumption and improve the blasting effect, but also have high value of popularization and application.

THE DESIGN OF VMEBUS BRIDGE CONTROLLER WITH SHARC BUS

Targeting at the high expense and inflexibility to realize VMEbus bridge controller by professional Integrated Circuit (IC), this paper presents a scheme of adopting CPLD/FPGA (Complicated Programmable Logic Device/Field Programmable Gate Array) to design bridge controller between VMEbus and local bus. SHARC DSP (Digital Signal Processor) bus is an example. It has functions of nearly entire master/slave interface of VMEbus, and can act as DMA (Direct Memory Access) controller and perform block transfer in DMA or master processor initiative way without length limit. External circuit of the design is very simple. In comparison with special ICs, it has high performance to price ratio and can be easily applied to local buses of other processors with quite a little modification.

Web-services-based Integration Design of PDM and DNC Systems

In a networked manufacturing environment, product data integration is the foundation of collaborative manufacturing among manufacturing enterprises. It is very important to build an effective integration mechanism for product data sharing of manufacturing enterprises in geographically dispersed, heterogeneous system platform. In order to integrate enterprise level product data management (PDM) system and shop floor level distributed numerical control (DNC) system, based on the description of Web services technology, a Web-services-based integration approach is presented for facilitating seamless sharing of product data between PDM and DNC systems in a networked manufacturing environment. In order to verify the validity of the proposed approach, an example-based integration development has been implemented with Java 2 Software Development Kit and Java Web Services Developer Pack in Windows 2000 Professional environment.

Design of Parallel Electrical Resistance Tomography System for Measuring Multiphase Flow

ERT(electrical resistance tomography) is effective method for visualization of multiphase flows,offering some advantages of rapid response and low cost,so as to explore the transient hydrodynamics.Aiming at this target,a fully programmable and reconfigurable FPGA(field programmable gate array)-based Compact PCI(peripheral component interconnect) bus linked sixteen-channel ERT system has been presented.The data acquisition system is carefully designed with function modules of signal generator module;Compact PCI transmission module and data processing module(including data sampling,filtering and demodulating).The processing module incorporates a powerful FPGA with Compact PCI bus for communication,and the measurement process management is conducted in FPGA.Image reconstruction algorithms with different speed and accuracy are also coded for this system.The system has been demonstrated in real time(1400 frames per second for 50 kHz excitation) with signal-noise-ratio above 62 dB and repeatability error below 0.7%.Static experiments have been conducted and the images manifested good resolution relative to the actual object distribution.The parallel ERT system has provided alternative experimental platform for the multiphase flow measurements by the dynamic experiments in terms of concentration and velocity.

Efficient XML Query and Update Processing Using A Novel Prime-Based Middle Fraction Labeling Scheme

XML data can be represented by a tree or graph and the query processing for XML data requires the structural information among nodes. Designing an efficient labeling scheme for the nodes of Order-Sensitive XML trees is one of the important methods to obtain the excellent management of XML data. Previous labeling schemes such as region and prefix often sacrifice updating performance and suffer increasing labeling space when inserting new nodes. To overcome these limitations, in this paper we propose a new labeling idea of separating structure from order. According to the proposed idea, a novel Prime-based Middle Fraction Labeling Scheme(PMFLS) is designed accordingly, in which a series of algorithms are proposed to obtain the structural relationships among nodes and to support updates. PMFLS combines the advantages of both prefix and region schemes in which the structural information and sequential information are separately expressed. PMFLS also supports Order-Sensitive updates without relabeling or recalculation, and its labeling space is stable. Experiments and analysis on several benchmarks are conducted and the results show that PMFLS is efficient in handling updates and also significantly improves the performance of the query processing with good scalability.

Design and Research of Big Data Processing Platform

This paper introduces the operational characteristics of the era of big data and the current era of big data challenges, and exhaustive research and design of big data analytics platform based on cloud computing, including big data analytics platform architecture system, big data analytics platform software architecture, big data analytics platform network architecture big data analysis platform unified program features and so on. The paper also analyzes the cloud computing platform for big data analysis program unified competitive advantage and development of business telecom operators play a certain role in the future.

A Generalized Equation of State for High-Pressure Liquids

An equation of state （EOS） for high-pressure liquids, i.e., Tait EOS, is deduced according to isothermal 1 3V compressibility KT= -1/V· （2V/2p）T·.Based on the equation, a generalized EOS for high pressure-liquids is established by using the reduced state principle and introducing a characteristic parameter-configuration factor ξ. Reasonably satisfactory P-V-T data for many organic compounds, including some polar components, were calculated by using the equation.

A statistical hiding algorithm based on self-similar network traffic

Although the encryption of network packets significantly increases privacy, the density of the traffic can still provide useful information to the observer, and maybe results in the breach of confidentiality. In this paper, we address issues related to hiding information in self-similar network, which is proved to be similar with modern communication network. And a statistical hiding algorithm is proposed for traffic padding. The figures and the comparison of Hurst Parameters before and after traffic padding, show the effective performance of the algorithm.

Experimental study on remodeling strength of granular materials under different loads and lengths of time

Remodeled clay and sand rock specimens were prepared by designing lateral confinement and water drainage experiments based on the stress exerted on granular materials in a waste dump.An in situ test was conducted in an internal waste dump;the physical and mechanical parameters of the remodeled rock mass dumped at different time and depths were measured.Based on statistics,regression analysis was performed with regard to the shearing stress parameters acquired from the two tests.Other factors,such as remodeling pressure(burial depth),remodeling time(amount of time since waste was dumped),and the corresponding functional relationship,were determined.Analysis indicates that the cohesion of the remodeled clay and its remodeling pressure are correlated by a quadratic function but are not correlated with remodeling time length.In situ experimental results indicate that the shear strength of reshaped granular materials in the internal dump is positively correlated with burial depth but poorly correlated with time length.Cohesion Cand burial depth H follow a quadratic function,specifically for a short time since waste has been dumped.As revealed by both in situ and laboratory experiments,the remodeling strength of granular materials varies in a certain pattern.The consistency of such materials verifies the reliability of the remodeling experimental program.

Organizational Data Management： Proposing a Metadata-Driven Data Warehouse （DW） Model

Discussing the matter of organizational data management implies, almost automatically, the concept of data warehousing as one of the most important parts of decision support system （DSS）, as it supports the integration of information management by aggregating all data formats and provisioning external systems with consistent data content and flows, together with the metadata concept, as one of the easiest ways of integration for software and database systems. Since organizational data management uses the metadata channel for creating a bi-directional flow, when correctly managed, metadata can save both time and resources for organizations. This paperI will focus on providing theoretical aspects of the two concepts, together with a short brief over a proposed model of design for an organizational management tool.