劳动法执行中的“次标准”——基于2006-2010年对珠江三角洲农民工的调查

基于对中山大学社会学与社会工作系2006-2010年间关于珠三角农民工的三次大规模问卷调查数据的比较分析发现,劳动法并未能够有效保护大多数农民工的劳动权利。劳动法执行过程中已经形成了"次标准",即在劳动法规定的强制性劳动标准之外,劳动法的执行过程产生了一个资方、劳动者和政府等相关方基于默契共同遵守的标准。该标准通常低于法定劳动标准,并将违法形塑为常态和长期趋势。"次标准"是法律文本与法律实践长期分离的结果,造成这种分离的原因在于两者分别应对不同的需要,法律文本满足意识形态需要,法律实践则满足现实需要。

Challenges using electronic nursing routine data for outcome analyses:A mixed methods study

Objectives To explore the challenges of secondary use of routinely collected data for analyzing nursing-sensitive outcomes in Austrian acute care hospitals.Method A convergent parallel mixed methods design was performed.We conducted a quantitative representative survey with nursing managers from 32 Austrian general acute care hospitals and 11 qualitative semi-structured interviews with nursing quality management experts.Both results were first analyzed independently and afterward merged in the discussion.Results On average,76%of nursing documentation is already electronically supported in the surveyed Austrian hospitals.However,existing nursing data is seldom used for secondary purposes such as nursing-sensitive outcome analyses.This is due to four major reasons:First,hospitals often do not have a data strategy for the secondary use of routine data.Second,hospitals partly lack the use of standardized and uniform nursing terminologies,especially for nursing evaluation.Third,routine nursing data is often not documented correctly and completely.Fourth,data on nursing-sensitive outcomes is usually collected in specific documentation forms not integrated into routine documentation.Conclusion The awareness of the possibilities for secondary use of nursing data for nursing-sensitive outcome analyses in Austrian hospitals is still in its infancy.Therefore,nursing staff and nursing management must be trained to understand how to collect and process nursing data for nursing-sensitive outcome analyses.Further studies would be interesting in order to determine the factors that influence the decision-making processes for the secondary use of nursing data for outcome analyses.

Congestion aware routing algorithm for delay-disruption tolerance networks

There were many contradictory evaluation criteria to select next-hop in the delay-disruption tolerance networks(DTN).To solve this problem,an attribute hierarchical model was proposed,in which the predefined criteria were summarized as static identity attributes,forwarding desire attributes and delivery capability attributes(IDC).Based on this model,a novel multi-attributes congestion aware routing(MACAR) scheme with uncertain information for next-hop selection was presented,by adopting an decision theory to aggregate attributes with belief structure and computing partial ordering relations.The simulation results show that MACAR presents higher successful delivery rate,lower average delay and effectively alleviate congestion.

An Overview of the Analytic Hierarchy Process （AHP） and Its Applications to Determine Benchmarking Criteria in Industrial Companies

This paper determines benchmarking criteria from the actors＇ point of view, who are involved in benchmarking processes within four Libyan industrial companies （LICs）. It also describes an application of the analytic hierarchy process （AHP）, which can help an organization to determine its benchmarking criteria. It presents a structured hierarchy for assessing the key capabilities using the AHP. The hierarchy is illustrated using the four main criteria that manufacturing companies will consider when carrying out benchmarking. AHP and benchmarking techniques make the implementation and analysis studies more effective, easy, and applicable to companies. Further, AHP is used to calculate the relative weights of criteria, sub-criteria, and specific sub-criteria, to prioritize them, and finally to select the important benchmarking criteria within each of the four companies investigated. The overall findings suggest that quality control is the most important criterion considered to be benchmarked in companies Q and R. Meanwhile, cost control is considered as the most important criterion to be benchmarked in companies S and T1.

Comparative analysis on soil engineering classifications of China and America

Based on China National Standard of Soil Engineering Classification (GB/T 50145-2007) and the Unified Soil Classification System of American Society for Testing Materials (ASTM D-2478), two kinds of soil laboratory engineering classification methods were discussed and analyzed from the aspects of the definition in particle fraction, classification of soil type and evaluation standard for soil gradation. There is a same limit of fine grains fraction in the two standards, and there are three main types of soil in GB/T 50145-2007 and two in ASTM D-2487. Different evaluation standards of gradation are put forward for gravels and sands in ASTM D-2487. Same criteria of A line, B line and controlling value of plastic index are in the plasticity chart of both standards.

A new proof for the correctness of the F5 algorithm

In 2002, Faugere presented the famous F5 algorithm for computing GrSbner basis where two cri- teria, syzygy criterion and rewritten criterion, were proposed to avoid redundant computations. He proved the correctness of the syzygy criterion, but the proof for the correctness of the rewritten criterion was left. Since then, F5 has been studied extensively. Some proofs for the correctness of F5 were proposed, but these proofs are valid only under some extra assumptions. In this paper, we give a proof for the correctness of F5B, an equivalent version of F5 in Buchberger＇s style. The proof is valid for both homogeneous and non-homogeneous polynomial systems. Since this proof does not depend on the computing order of the S-pairs, any strategy of selecting S-pairs could be used in F5B or F5. Furthermore, we propose a natural and non-incremental variant of F5 where two revised criteria can be used to remove almost all redundant S-pairs.

OSCILLATION CRITERIA FOR NONLINEAR SECOND ORDER ELLIPTIC DIFFERENTIAL EQUATIONS

The second order elliptic differential equations are considered in an exterior domain Ω Rn, n≥2, where p can chang sign. Some new sufficient conditions for the oscillation of solutions of (1.1) and (1.2) are established.

Aerodynamic Loading Distribution Effects on the Overall Performance of Ultra-High-Lift LP Turbine Cascades

The present paper reports the results of an experimental investigation aimed at comparing aerodynamic perform- ance of three low-pressure turbine cascades for several Reynolds numbers under steady and unsteady inflows. This study is focused on finding design criteria useful to reduce both profile and secondary losses in the aero-engine LP turbine for the different flight conditions. The baseline blade cascade, characterized by a standard aerodynamic loading （Zw=1.03）, has been compared with two Ultra-High-Lift profiles with the same Zweifel number （Zw=1.3 for both cascades）, but different velocity peak positions, leading to front and mid-loaded blade cascade configurations. The aerodynamic flow fields downstream of the cascades have been experimentally in- vestigated for Reynolds numbers in the range 70000〈Re〈300000, where lower and upper limits are typical of cruise and take-off/landing conditions, respectively. The effects induced by the incoming wakes at the reduced frequency ./＋=0.62 on both profile and secondary flow losses for the three different cascade designs have been studied. Total pressure and velocity distributions have been measured by means of a miniaturized 5-hole probe in a tangential plane downstream of the cascade for both inflow conditions. The analysis of the results allows the evaluation of the aerodynamic performance of the blade cascades in terms of profile and secondary losses and the understanding of the effects of loading distribution and Zweifel number on secondary flows. When operating un- der unsteady inflow, contrarily to the steady case, the mid-loaded cascade has been found to be characterized by the lowest profile and secondary losses, making it the most attractive solution for the design of blades working in real conditions where unsteady inflow effects are present.

A disposable cobalt-based phosphate sensor based on screen printing technology

Screen printing is a promising technology because of its simplicity, low-cost, high reproducibility, and efficiency in large-scale production. In this work, a cobalt-based phosphate sensor was successfully fabricated using the screen printing technology for the determination of phosphate concentration in the aqueous solution. The disposable sensor consists of a fully integrated cobalt （Co） electrode, which is a layer of carbon conductive ink （C） physically doped with Co powder, and Ag/AgCI reference electrode. The SEM images show that the morphology of the Co electrode changes after exposure to the phosphate solution, indicating that the expendable reaction exists during the measurement. At the Co/C ratio of 1：99, the cobalt-based phosphate sensor shows phosphate-selective potential response in the range of 10-4 to 10-1 mol/L, yielding a detection limit of lxl0-5 mol/L and a slope of over 30 mV/decade in acidic solution （pH 4.5） for HzPO4-. The proposed screen-printed sensor also ex- hibited significant reproducibility with a small repeated sensing deviation （i.e., relative standard deviation （R.S.D.） of 0.5%） on a single sensor and a small electrode-to-electrode deviation （i.e., R.S.D. 〈 3.2%）. The recovery study of HzPO4- in real wastewater samples gave values from 95.4% to 101.8%, confirming its application potential in the measurement of phosphate in real samples. Apart from its high selectivity, sensitivity, and stability comparable with a conventional bulk Co-wire electrode, the proposed phosphate sensor still yields many other advantages, such as low price, compactness, ease of use, and the possibility of integration with other analytical devices such as flow injection analysis.