The main objective of this work is to propose new mixture response parameters and to compare correlations with rut depths and sensitivity of permanent deformation response parameters based on field extracted cores and...The main objective of this work is to propose new mixture response parameters and to compare correlations with rut depths and sensitivity of permanent deformation response parameters based on field extracted cores and lab-mixed duplicates. A new "mix-confined" test is developed and four new parameters for this test are proposed. Correlation coefficients with rut depths and coefficients of variation (sensitivity) are compared between the four new and two existing parameters. Some parameters are recommended to be used for the newly developed test. The results show that, newly developed test can capture the changes of permanent deformation of asphalt mixtures. Only one new parameter (D1 of Stephen Price model) and one existing parameter (flow number, Fn ) have strong correlations with rut depths of asphalt pavements (R2 greater than 0.7) and have relative small sensitivity (coefficient of variation, COV, less than 30%). For polymer modified asphalt mixtures, the parameter D1 rather than Fn should be used. These findings can be used to check the permanent deformation of asphalt mixture during the mix design.展开更多
Using seawater in concrete can be considered as one of the sustainable approaches in construction industry not only to save the freshwater resource but also to promote the use of abandoned seawater resource, especiall...Using seawater in concrete can be considered as one of the sustainable approaches in construction industry not only to save the freshwater resource but also to promote the use of abandoned seawater resource, especially in the construction at the uninhabited area close to the sea where the procurement of fresh water is difficult. In this study, durability against chloride attack of seawater mixed concrete with different replacement ratio of BFS （blast furnace slag） and FA （fly ash） is discussed and the life time until the occurrence of corrosion crack is evaluated. The results show that： （1） Chloride penetration rate of seawater mixed specimens with BFS and FA is lower than that of freshwater mixed OPC （ordinary Portland cement） specimens; （2） Oxygen permeability of seawater mixed specimens with BFS and FA is almost the same or lower than that of freshwater mixed OPC specimens; （3） Total life time （corrosion incubation period and propagation period） of seawater mixed specimens with BFS and FA is almost the same or only slightly shorter than that of freshwater mixed OPC specimens. From the results, it was confirmed that the usage of seawater in concrete mixing is feasible in concrete with the appropriate BFS and FA replacement ratio.展开更多
This paper proposes a moving ratio test, which is a modified version of ratio test by involving a bandwidth parameter, to detect multiple changes in persistence, and to determine the direction of switch. The asymptoti...This paper proposes a moving ratio test, which is a modified version of ratio test by involving a bandwidth parameter, to detect multiple changes in persistence, and to determine the direction of switch. The asymptotic distribution as well as its consistency are established. In order to estimate the change points, the authors propose a two step estimate approach. Simulations illustrate the performance of the test and estimate procedures in finite samples. An application to the analysis of Sweden/US foreign exchange rate demonstrates the validity of the procedure in practice.展开更多
基金Project(08Y038) supported by Jiangsu Transportation Engineering Construction Bureau,China
文摘The main objective of this work is to propose new mixture response parameters and to compare correlations with rut depths and sensitivity of permanent deformation response parameters based on field extracted cores and lab-mixed duplicates. A new "mix-confined" test is developed and four new parameters for this test are proposed. Correlation coefficients with rut depths and coefficients of variation (sensitivity) are compared between the four new and two existing parameters. Some parameters are recommended to be used for the newly developed test. The results show that, newly developed test can capture the changes of permanent deformation of asphalt mixtures. Only one new parameter (D1 of Stephen Price model) and one existing parameter (flow number, Fn ) have strong correlations with rut depths of asphalt pavements (R2 greater than 0.7) and have relative small sensitivity (coefficient of variation, COV, less than 30%). For polymer modified asphalt mixtures, the parameter D1 rather than Fn should be used. These findings can be used to check the permanent deformation of asphalt mixture during the mix design.
文摘Using seawater in concrete can be considered as one of the sustainable approaches in construction industry not only to save the freshwater resource but also to promote the use of abandoned seawater resource, especially in the construction at the uninhabited area close to the sea where the procurement of fresh water is difficult. In this study, durability against chloride attack of seawater mixed concrete with different replacement ratio of BFS （blast furnace slag） and FA （fly ash） is discussed and the life time until the occurrence of corrosion crack is evaluated. The results show that： （1） Chloride penetration rate of seawater mixed specimens with BFS and FA is lower than that of freshwater mixed OPC （ordinary Portland cement） specimens; （2） Oxygen permeability of seawater mixed specimens with BFS and FA is almost the same or lower than that of freshwater mixed OPC specimens; （3） Total life time （corrosion incubation period and propagation period） of seawater mixed specimens with BFS and FA is almost the same or only slightly shorter than that of freshwater mixed OPC specimens. From the results, it was confirmed that the usage of seawater in concrete mixing is feasible in concrete with the appropriate BFS and FA replacement ratio.
基金supported by the National Natural Science Foundation of China under Grant Nos.61065009 and 60972150
文摘This paper proposes a moving ratio test, which is a modified version of ratio test by involving a bandwidth parameter, to detect multiple changes in persistence, and to determine the direction of switch. The asymptotic distribution as well as its consistency are established. In order to estimate the change points, the authors propose a two step estimate approach. Simulations illustrate the performance of the test and estimate procedures in finite samples. An application to the analysis of Sweden/US foreign exchange rate demonstrates the validity of the procedure in practice.
