The taxonomy characteriazation and cadmium （Cd） biosorption of the high Cd-resistant fungus M1 were investigated. The internal transcribed spacers （ITS） region and β-tubulin genes of the strain were amplified, se...The taxonomy characteriazation and cadmium （Cd） biosorption of the high Cd-resistant fungus M1 were investigated. The internal transcribed spacers （ITS） region and β-tubulin genes of the strain were amplified, sequenced and analyzed by molecular biology technology. The Cd biosorption assay was performed by shaking flask. Fourier transform infrared spectroscopy was used to analyze the mycelium. The similarity of gene sequences and phylogenetic trees show the very close relation between the strain and Paecilomyces lilacinus, and the fungus M1 was identified as P. Lilacinus. The initial pH 6 and Cd concentration about 100 mg/L are optimum. Zn and Mn have a little effect on the Cd biosorption of the strain, while Cu and Pb present obvious effects. FTIR analysis shows that the fungus adsorbs Cd by esters, anhydride, and amide. With the preferable absorption capacity, fungus M1 is considered to have good prospects in bioremediation.展开更多
Applied Immobilized algae bacteria (ABI) to remove ammonia of freshwater aquaculture wastewater. Temperature (T),PH,light intensity (I),dissolved oxygen (DO) and filling rate five factors plays important role in the p...Applied Immobilized algae bacteria (ABI) to remove ammonia of freshwater aquaculture wastewater. Temperature (T),PH,light intensity (I),dissolved oxygen (DO) and filling rate five factors plays important role in the process of ammonia nitrogen removal ,related data between ammonia removal and five factors was received through multi-factor orthogonal test,and established relations model between the five factor and nitrogen removal. The results show that five-factors had significant effect on AR,and the best combinations for removing AR was temperature 30 ℃,pH=7.0,light intensity 6 000 lux,dissolved oxygen 5.0 mg/L and the fill rate 10%. According to the experimental data,equation model was proposed and coefficient of determination R2 =0.864 8,P<0.05. Samples T-test was done between the model predictions and the actual measured values.Test results showed that the significant difference of overall mean value sig. (2-tailed) was 0.978 (P>0.05),it Shows that had no significant difference between model predictions and the actual measured value,and model had a high degree of fitting.展开更多
Small modular reactors(SMRs) are beneficial in providing electricity power safely and viable for specific applications such as seawater desalination and heat production. Due to its inherent safety feature, the modular...Small modular reactors(SMRs) are beneficial in providing electricity power safely and viable for specific applications such as seawater desalination and heat production. Due to its inherent safety feature, the modular high temperature gas-cooled reactor(MHTGR) is considered as one of the best candidates for SMR-based nuclear power plants. Since its dynamics presents high nonlinearity and parameter uncertainty, it is necessary to develop adaptive power-level control, which is beneficial to safe, stable, and efficient operation of MHTGR and is easy to be implemented. In this paper, based on the physically-based control design approach, an adaptive outputfeedback power-level control is proposed for MHTGRs. This control can guarantee globally bounded closedloop stability and has a simple form. Numerical simulation results show the correctness of the theoretical analysis and satisfactory regulation performance of this control.展开更多
基金Project(50925417)supported by the National Funds for Distinguished Young Scientist,ChinaProject(2012BAC09B04)supported by the National Key Technology Research and Development Program,China+2 种基金Project supported by the Post-doctoral Program of Central South University,ChinaProjects(31100082,61171061)supported by the National Natural Science Foundation of ChinaProject(2012SK4028)supported by the Science and Technology Program of Hunan Province,China
文摘The taxonomy characteriazation and cadmium （Cd） biosorption of the high Cd-resistant fungus M1 were investigated. The internal transcribed spacers （ITS） region and β-tubulin genes of the strain were amplified, sequenced and analyzed by molecular biology technology. The Cd biosorption assay was performed by shaking flask. Fourier transform infrared spectroscopy was used to analyze the mycelium. The similarity of gene sequences and phylogenetic trees show the very close relation between the strain and Paecilomyces lilacinus, and the fungus M1 was identified as P. Lilacinus. The initial pH 6 and Cd concentration about 100 mg/L are optimum. Zn and Mn have a little effect on the Cd biosorption of the strain, while Cu and Pb present obvious effects. FTIR analysis shows that the fungus adsorbs Cd by esters, anhydride, and amide. With the preferable absorption capacity, fungus M1 is considered to have good prospects in bioremediation.
基金Supported by the National Natural Science Foundation of China(No.30972260)~~
文摘Applied Immobilized algae bacteria (ABI) to remove ammonia of freshwater aquaculture wastewater. Temperature (T),PH,light intensity (I),dissolved oxygen (DO) and filling rate five factors plays important role in the process of ammonia nitrogen removal ,related data between ammonia removal and five factors was received through multi-factor orthogonal test,and established relations model between the five factor and nitrogen removal. The results show that five-factors had significant effect on AR,and the best combinations for removing AR was temperature 30 ℃,pH=7.0,light intensity 6 000 lux,dissolved oxygen 5.0 mg/L and the fill rate 10%. According to the experimental data,equation model was proposed and coefficient of determination R2 =0.864 8,P<0.05. Samples T-test was done between the model predictions and the actual measured values.Test results showed that the significant difference of overall mean value sig. (2-tailed) was 0.978 (P>0.05),it Shows that had no significant difference between model predictions and the actual measured value,and model had a high degree of fitting.
文摘Small modular reactors(SMRs) are beneficial in providing electricity power safely and viable for specific applications such as seawater desalination and heat production. Due to its inherent safety feature, the modular high temperature gas-cooled reactor(MHTGR) is considered as one of the best candidates for SMR-based nuclear power plants. Since its dynamics presents high nonlinearity and parameter uncertainty, it is necessary to develop adaptive power-level control, which is beneficial to safe, stable, and efficient operation of MHTGR and is easy to be implemented. In this paper, based on the physically-based control design approach, an adaptive outputfeedback power-level control is proposed for MHTGRs. This control can guarantee globally bounded closedloop stability and has a simple form. Numerical simulation results show the correctness of the theoretical analysis and satisfactory regulation performance of this control.
