[ Objective] The aim was to discuss the optimum fermentation technology of kiwi wine. [Method] Effects of pH, SO2 concentration, fer- mentation temperature, yeast inoculums amount on the quality of kiwi wine were inve...[ Objective] The aim was to discuss the optimum fermentation technology of kiwi wine. [Method] Effects of pH, SO2 concentration, fer- mentation temperature, yeast inoculums amount on the quality of kiwi wine were investigated by single factor experiment and orthogonal experiment. P, esult] The optimum conditions were as follows： fermentation temperature （22 ℃ ）, yeast inoculums （0.20 g/L）, SO2 concentration （60 mg/L） and pH （3.5）. The kiwi wine produced under these conditions was yellowish green, transparent, moderately acidic with strong fruit flavor and aro- ma. [ Conclusion]The study provided a theoretical foundation for the development and production of deeply processed products of kiwifruit.展开更多
A considerable number of in situ permeability tests in flysch are processed to a depth of 120m with a good spatial distribution. The distribution of permeability values for the different litho-types of this formation,...A considerable number of in situ permeability tests in flysch are processed to a depth of 120m with a good spatial distribution. The distribution of permeability values for the different litho-types of this formation, their comparison and their decrease with depth is discussed. The depth where a permeability of 3 to 5×10-7m/sec can be retained (the limit of a reasonable grouting under a high dam) may be twofold if the geological history of the formation could not contain a compressional tectonic process. This depth may reach 100m in some cases. The differences in the mean values of permeability among the various litho-types are minor, while the presence of siltstones, always present although with varied participation, dramatically controls the global permeability.展开更多
[Objective] The aim was to optimize the sea cucumber peptide yield and its activity. [Method] The impact of VC, VE and leathin on the yield and activity of sea cucumber peptide were investigated by using Glutathione a...[Objective] The aim was to optimize the sea cucumber peptide yield and its activity. [Method] The impact of VC, VE and leathin on the yield and activity of sea cucumber peptide were investigated by using Glutathione as the standard and 1,10-Phenanthroline method. [Result] Under the conditions of 0.1% VC , 0.2% VE and 2.0% leathin, the activity of sea cucumber peptide was about 50% high and the extraction yield of it could reach 7.12%. [Conclusion] The deep processing of sea cucumber provided effective study idea.展开更多
A series of single hole blasting crater experiments and a variable distance multi-hole simultaneous blasting experiment was carried in the Yunfu Troilite Mine,according to the Livingston blasting crater theory.We intr...A series of single hole blasting crater experiments and a variable distance multi-hole simultaneous blasting experiment was carried in the Yunfu Troilite Mine,according to the Livingston blasting crater theory.We introduce in detail,our methodology of data collection and processing from our experiments.Based on the burying depth of the explosives,the blasting crater volume was fitted by the method of least squares and the characteristic curve of the blasting crater was obtained using the MATLAB soft- ware.From this third degree polynomial,we have derived the optimal burying depth,the critical burying depth and the optimal explosive specific charge of the blasting crater.展开更多
In this work, the cutting forces by end milling operation are analyzed. Therefore, the main parameters of cutting force as cutting speed, feed rate and depth of cut also are investigated in our case. The cutting force...In this work, the cutting forces by end milling operation are analyzed. Therefore, the main parameters of cutting force as cutting speed, feed rate and depth of cut also are investigated in our case. The cutting force is modelled and analyzed into mathematical Wolfram simulations in order to compare the results and in the same time achieve the best solutions. Theoretical results are carried out by using the regression method that required fulfilling the critter by Fisher. The number of experiment, measurements and results of cutting force are presented in 2D as well as 3D. In order to verify the accuracy of the 2D diagram, the results for our case is used both two way such as experimental and theoretical method as well as results are compared. In other hands, these results indicate directly that the optimized parameters are capable of machining the workpiece. The obtained measurement results are compared with theoretical methods in Wolfram software.展开更多
Under the context of economic transformation and upgrading and the continued advancement of supplyside reforms in China, the development of the energy industry is confronted with many problems and challenges, such as ...Under the context of economic transformation and upgrading and the continued advancement of supplyside reforms in China, the development of the energy industry is confronted with many problems and challenges, such as insufficient energy investment, a shortage of financing channels,and the low participation of social capital. In order to fully mobilize social capital to invest in energy, enhance energy investment efficiency, expand energy financing channels,and increase the vitality of the energy industry, the state has recently issued the Implementing Opinions on Deepening the Reform of Investment and the Financing System in the Energy Industry( "Opinions"). This paper provides a deep interpretation of this document from the perspectives of the background for the investment and financing system reform in the energy industry,the main content of the reform, the problems and challenges confronting the reform,and the expected effects from the reform, and analyzes the objectives, ideas and problems of the reform, in order to effectively promote the investment and financing system reform in the energy industry.展开更多
According to the characteristics of deep engineering surrounding rock main shaft of No.3 mining district in Jinchuan, electron microscope scanning and rock mechanics test were adopted to analyze the damage features of...According to the characteristics of deep engineering surrounding rock main shaft of No.3 mining district in Jinchuan, electron microscope scanning and rock mechanics test were adopted to analyze the damage features of rock. The software of FLAG3D and Burgers body （Kelvin-Maxwell model） were used to research on rheological theory, and rheological model was modified. The results indicate that the damage of rock mass is very serious, and the rheological characteristics also outstanding; rheological behavior of deep surrounding rocks of the shaft can be taken as superposition of transient and stable rheology; and there exist the most dangerous zone on 100 m higher than 1 063 m level, so it is necessity that works of monitor and corresponding reinforcement should strengthen.展开更多
The miniaturisation context leads to the rise of micro-machining processes. Micro-milling is one of the most flexible and fast of them. Although it is based on the same principles as macro-cutting, it is not a simple ...The miniaturisation context leads to the rise of micro-machining processes. Micro-milling is one of the most flexible and fast of them. Although it is based on the same principles as macro-cutting, it is not a simple scaling-down of it. This down-sizing involves new phenomena in the chip formation, such as the minimum chip thickness below which no chip is formed. This paper presents a review of the current state of the art in this field from an experimental and a numerical point of view. A 2D finite element model is then developed to study the influence of the depth of cut on the chip formation. After the model validation in macro-cutting, it highlights the phenomena reported in literature and allows to perform a minimum chip thickness estimation.展开更多
文摘[ Objective] The aim was to discuss the optimum fermentation technology of kiwi wine. [Method] Effects of pH, SO2 concentration, fer- mentation temperature, yeast inoculums amount on the quality of kiwi wine were investigated by single factor experiment and orthogonal experiment. P, esult] The optimum conditions were as follows： fermentation temperature （22 ℃ ）, yeast inoculums （0.20 g/L）, SO2 concentration （60 mg/L） and pH （3.5）. The kiwi wine produced under these conditions was yellowish green, transparent, moderately acidic with strong fruit flavor and aro- ma. [ Conclusion]The study provided a theoretical foundation for the development and production of deeply processed products of kiwifruit.
文摘A considerable number of in situ permeability tests in flysch are processed to a depth of 120m with a good spatial distribution. The distribution of permeability values for the different litho-types of this formation, their comparison and their decrease with depth is discussed. The depth where a permeability of 3 to 5×10-7m/sec can be retained (the limit of a reasonable grouting under a high dam) may be twofold if the geological history of the formation could not contain a compressional tectonic process. This depth may reach 100m in some cases. The differences in the mean values of permeability among the various litho-types are minor, while the presence of siltstones, always present although with varied participation, dramatically controls the global permeability.
文摘[Objective] The aim was to optimize the sea cucumber peptide yield and its activity. [Method] The impact of VC, VE and leathin on the yield and activity of sea cucumber peptide were investigated by using Glutathione as the standard and 1,10-Phenanthroline method. [Result] Under the conditions of 0.1% VC , 0.2% VE and 2.0% leathin, the activity of sea cucumber peptide was about 50% high and the extraction yield of it could reach 7.12%. [Conclusion] The deep processing of sea cucumber provided effective study idea.
文摘A series of single hole blasting crater experiments and a variable distance multi-hole simultaneous blasting experiment was carried in the Yunfu Troilite Mine,according to the Livingston blasting crater theory.We introduce in detail,our methodology of data collection and processing from our experiments.Based on the burying depth of the explosives,the blasting crater volume was fitted by the method of least squares and the characteristic curve of the blasting crater was obtained using the MATLAB soft- ware.From this third degree polynomial,we have derived the optimal burying depth,the critical burying depth and the optimal explosive specific charge of the blasting crater.
文摘In this work, the cutting forces by end milling operation are analyzed. Therefore, the main parameters of cutting force as cutting speed, feed rate and depth of cut also are investigated in our case. The cutting force is modelled and analyzed into mathematical Wolfram simulations in order to compare the results and in the same time achieve the best solutions. Theoretical results are carried out by using the regression method that required fulfilling the critter by Fisher. The number of experiment, measurements and results of cutting force are presented in 2D as well as 3D. In order to verify the accuracy of the 2D diagram, the results for our case is used both two way such as experimental and theoretical method as well as results are compared. In other hands, these results indicate directly that the optimized parameters are capable of machining the workpiece. The obtained measurement results are compared with theoretical methods in Wolfram software.
文摘Under the context of economic transformation and upgrading and the continued advancement of supplyside reforms in China, the development of the energy industry is confronted with many problems and challenges, such as insufficient energy investment, a shortage of financing channels,and the low participation of social capital. In order to fully mobilize social capital to invest in energy, enhance energy investment efficiency, expand energy financing channels,and increase the vitality of the energy industry, the state has recently issued the Implementing Opinions on Deepening the Reform of Investment and the Financing System in the Energy Industry( "Opinions"). This paper provides a deep interpretation of this document from the perspectives of the background for the investment and financing system reform in the energy industry,the main content of the reform, the problems and challenges confronting the reform,and the expected effects from the reform, and analyzes the objectives, ideas and problems of the reform, in order to effectively promote the investment and financing system reform in the energy industry.
基金Supported by the National Natural Science Foundation of China(50874042)Key Projects in the National Science & Technology Pillar Program in the Eleventh Five-Year Plan Period(2008BAB32B01)
文摘According to the characteristics of deep engineering surrounding rock main shaft of No.3 mining district in Jinchuan, electron microscope scanning and rock mechanics test were adopted to analyze the damage features of rock. The software of FLAG3D and Burgers body （Kelvin-Maxwell model） were used to research on rheological theory, and rheological model was modified. The results indicate that the damage of rock mass is very serious, and the rheological characteristics also outstanding; rheological behavior of deep surrounding rocks of the shaft can be taken as superposition of transient and stable rheology; and there exist the most dangerous zone on 100 m higher than 1 063 m level, so it is necessity that works of monitor and corresponding reinforcement should strengthen.
文摘The miniaturisation context leads to the rise of micro-machining processes. Micro-milling is one of the most flexible and fast of them. Although it is based on the same principles as macro-cutting, it is not a simple scaling-down of it. This down-sizing involves new phenomena in the chip formation, such as the minimum chip thickness below which no chip is formed. This paper presents a review of the current state of the art in this field from an experimental and a numerical point of view. A 2D finite element model is then developed to study the influence of the depth of cut on the chip formation. After the model validation in macro-cutting, it highlights the phenomena reported in literature and allows to perform a minimum chip thickness estimation.
