The lime-depressed pyrite from Cu differential flotation tailings with acid mine drainage(AMD)as a natural activator was recovered.The effect of AMD on lime-depressed pyrite flotation was investigated by a series of l...The lime-depressed pyrite from Cu differential flotation tailings with acid mine drainage(AMD)as a natural activator was recovered.The effect of AMD on lime-depressed pyrite flotation was investigated by a series of laboratory flotation tests and surface analytical techniques.Flotation test results indicated that AMD could effectively activate the pyrite flotation with a sodium butyl xanthate(SBX)collector,and a high-quality sulfur concentrate was obtained.Pulp ion concentration analysis results indicated that AMD facilitated desorption of Ca^(2+)and adsorption of Cu^(2+)on the depressed-pyrite surface.Adsorption measurements and contact angle analysis results confirmed that adding AMD improved the adsorption amount of SBX collector on the pyrite surface and increased the contact angle by 31°.Results of Raman spectroscopy and X-ray photoelectron spectroscopy analysis indicated that AMD treatment promoted the formation of hydrophobic species(S^(0) hydrophobic entity and copper sulfides)and the removal of hydrophilic calcium and iron species on the pyrite surface,which reinforced the adsorption of collector.The findings of the present research provide important theoretical basis and technical support for a cleaner production of copper sulfide ores.展开更多
Ordovician limestone water is coal mines. In this paper, we analyze the the main source of water inrush in North China characteristic of three kinds of nonlinear seismic attributes, such as the largest lyapunov expone...Ordovician limestone water is coal mines. In this paper, we analyze the the main source of water inrush in North China characteristic of three kinds of nonlinear seismic attributes, such as the largest lyapunov exponent,fractal dimension and entropy and introduce their calculation methods. Taking the 81st and 82nd coal districts in the Xutuan coal mine as examples, we extract the three seismic attributes based on the 3D prestack migration seismic data of this area, which can display the Ordovician limestone fracture distribution in the mine. We comprehensively analyzed the three nonlinear seismic attributes and compared the results with transient electromagnetic exploration results and determined the possible Ordovician limestone aquosity distribution. This demonstrated that the nonlinear seismic attributes technology is an effective approach to predict the aquosity of Ordovician limestone.展开更多
The capacities of two arbuscular mycorrhizal (AM) fungi, Glomusmosseae and Glomus versiforme, to mineralize added organic P werestudied in a sterilized clacareous soil. Mycorrhizal (inoculated witheither of the AM fun...The capacities of two arbuscular mycorrhizal (AM) fungi, Glomusmosseae and Glomus versiforme, to mineralize added organic P werestudied in a sterilized clacareous soil. Mycorrhizal (inoculated witheither of the AM fungi) and non-mycorrhizal red clover (Trifoliumpratense L.) plants were grown for eight weeks in pots with upperroot, central hyphal and lower soil compartments. The hyphal and soilcompartments received either organic P (as Na-phytte) or inorganic P(as KH_2PO_4) at the rate of 50 mg P kg^-1. No P was added to theroot compartments.展开更多
Dust suppression in coal mines is a worldwide problem which has not been solved effectively. The applica-tion of negative pressure secondary dust removal (NPSDR) is a breakthrough in the coal mine safety field. In thi...Dust suppression in coal mines is a worldwide problem which has not been solved effectively. The applica-tion of negative pressure secondary dust removal (NPSDR) is a breakthrough in the coal mine safety field. In this paper,NPSDR technology and ultrasonic dust suppression systems are introduced. High pressure water is supplied to the NPSDR device which is mounted on the shearer. A negative pressure field is formed in the device. At the same time,the dusty air around the shearer drum will be sucked into,and purged from,the NPSDR device by the negative pressure field. An ultrasonic dust suppression system uses water and compressed air to produce micron sized droplets which suppress respirable coal dust effectively. The NPSDR technology can be used for shearer dust suppression while ultra-sonic dust suppression can be applied in areas such as the transportation positions. These dust suppression methods have the following advantages: high efficiency,wide applicability,simple structure,high reliability and low cost.展开更多
Accurate detection and picking of the P-phase onset time in noisy microseismic data from underground mines remains a big challenge. Reliable P-phase onset time picking is necessary for accurate source location needed ...Accurate detection and picking of the P-phase onset time in noisy microseismic data from underground mines remains a big challenge. Reliable P-phase onset time picking is necessary for accurate source location needed for planning and rescue operations in the event of failures. In this paper, a new technique based on the discrete stationary wavelet transform (DSWT)and higher order statist!cs, is proposed for processing noisy data from underground mines. The objectives of this method are to (1) Improve manual detection and tPicking of P-phase onset; and (ii) provide an automatic means of detecting and picking P-phase onset me accurately. The DSWT is first used to filter the signal over several scales. The manual P-phase onset detection and picking are then obtained by computing the signal energy across selected scales with frequency bands that capture the signal of interest. The automatic P-phase onset, on the other hand, is achieved by using skewness- and kurtosis-based criterion applied to selected scales in a time-frequency domain. The method was tested using synthetic and field data from an underground limestone mine. Results were compared with results obtained by using the short-term to long-term average (STA/LTA) ratio and that by Reference Ge et al. (2009). The results show that the me!hod provides a more reliable estimate of the P-phase onset arrival than the STA]LTA method when the signal to noise ratio is very low. Also, the results obtained from the field data matched accurately with the results from Reference Ge et al. (2009).展开更多
The grain refinement of the as-cast AZ31 alloys by limestone particles was investigated by grain refining tests and microstructure observations. The results show that the limestone particles have a good grain refining...The grain refinement of the as-cast AZ31 alloys by limestone particles was investigated by grain refining tests and microstructure observations. The results show that the limestone particles have a good grain refining potency, which is deeply related to the addition level of limestone and melting temperature. The optimal addition level and melting temperature are 2.0%(mass fraction) and 720 ℃, respectively. The average grain size of AZ31 alloy is reduced from(556±60) to(236±22) μm. The sound grain refining by raw limestone particles has a good anti-fading capacity without any significant grain coarsening in a 40 min holding time. The concerned grain refining mechanism should be attributed to the inoculated Al-C and Al-C/Al-Mn-(Fe) nuclei. Ultrasonic treatment can enhance the grain refining efficiency of limestone particles through cavitation-enhanced nucleation mechanism.展开更多
The current research was investigated the mechanism of coal demineralization and the effect of leaching parameters on high ash coal and study the characterization of pre and post-treated coal. The two high ash Indian ...The current research was investigated the mechanism of coal demineralization and the effect of leaching parameters on high ash coal and study the characterization of pre and post-treated coal. The two high ash Indian coal selected from Mahanadi Coalfield Limited, Odisha, pulverized to 375, 230 and 180 gm particle size were undergone simultaneous acid and alkali treatment at a different concentration, temperature and time. The percent demineralization was increased with decrease the size of the particle and rises with leaching parameters. The investigation suggested 180 μm particle size offers efficient demineralization for both coals at 30% NaOH and 30% H2SO4 concentration. The alkali leaching leads to obtaining the demineralization 46% and 42% whereas acid treatment resulted in 34% and 32% of the original coal samples. The extent of demineralization was improved the calorific value of coal. Besides, the degree of demineralization was proved from the FTIR, XRF and FESEM-EDX analysis results. FTIR analysis result showed that the peak intensity of mineral band decreased by the leaching effect and the degree of demineralization was significantly obtained to large extent by the X-ray Fluorescence spectrometer; which elucidates major minerals removed from coal by the leaching effect of acid and alkali solution.展开更多
The effect of removing pyrite and ash ffom fine coal with electrostatic separator is determined by the electric property of coal, the distribution of corona ion and etectrostatic field, and the disperse and even feed....The effect of removing pyrite and ash ffom fine coal with electrostatic separator is determined by the electric property of coal, the distribution of corona ion and etectrostatic field, and the disperse and even feed. The dielectric constant of coal and mineral matter is studied in this paper and the amendment has been made to survey theory. The oscillogram is adopted to study the distribution of corona ion and electrostatic field.The paper details the study of remoing pyrite and ash from fine coal, and the test results demonstrate the high efficiency of removing pyrite and ash with electrostatic separator.展开更多
The generally used methods of forecasting coal requirement quantity include the analogy method, the outside push method and the cause effect analysis method. However, the precision of forecasting results using these m...The generally used methods of forecasting coal requirement quantity include the analogy method, the outside push method and the cause effect analysis method. However, the precision of forecasting results using these methods is lower. This paper uses the grey system theory, and sets up grey forecasting model GM (1, 3) to coal requirement quantity. The forecasting result for the Chinese coal requirement quantity coincides with the actual values, and this shows that the model is reliable. Finally, this model are used to forecast Chinese coal requirement quantity in the future ten years.展开更多
A limestone mine in Ohio has had instability problems that have led to massive roof falls extending to the surface. This study focuses on the role that weak, moisture-sensitive floor has in the instability issues.Prev...A limestone mine in Ohio has had instability problems that have led to massive roof falls extending to the surface. This study focuses on the role that weak, moisture-sensitive floor has in the instability issues.Previous NIOSH research related to this subject did not include analysis for weak floor or weak bands and recommended that when such issues arise they should be investigated further using a more advanced analysis. Therefore, to further investigate the observed instability occurring on a large scale at the Ohio mine, FLAC3 D numerical models were employed to demonstrate the effect that a weak floor has on roof and pillar stability. This case study will provide important information to limestone mine operators regarding the impact of weak floor causing the potential for roof collapse, pillar failure, and subsequent subsidence of the ground surface.展开更多
Based on various ultrasonic loss mechanisms, the formula of the cumulative mass percentage of minerals with different particle sizes was given, with which the particle size distribution was integrated into an ultrason...Based on various ultrasonic loss mechanisms, the formula of the cumulative mass percentage of minerals with different particle sizes was given, with which the particle size distribution was integrated into an ultrasonic attenuation model. And then the correlations between the ultrasonic attenuation and the pulp density, and the particle size were obtained. The derived model was combined with the experiment and the analysis of experimental data to determine the inverse model relating ultrasonic attenuation coefficient with size distribution. Finally, an optimization method of inverse parameter, genetic algorithm was applied for particle size distribution. The results of inverse calculation show that the precision of measurement was high.展开更多
Several typical ash samples from a 0.25 MW test furnace fired black liquor coal slurry were selected for investigation. The phases and compounds containing sodium in ash samples were acquired from X-ray diffraction an...Several typical ash samples from a 0.25 MW test furnace fired black liquor coal slurry were selected for investigation. The phases and compounds containing sodium in ash samples were acquired from X-ray diffraction analyses. As well, detailed analyses of the amounts of major mineral elements along thickness gradients of representative ash samples were carried out. The elements, including Na, Si, A1, S and C1 were analyzed by the advanced electron probe microanalyzer equipment, which provid evidence and interpretation for the analytical results of XRD. The findings indicate that the occurrence form of sodium has experi- enced important changes during the combustion of black liquor coal slurry, which translated into nepheline, thenardite, sodium sulfate, sodium chloride, sodium silicoaluminate, hanyne and other phases containing sodium, from NaOH, Na2CO3 and Na2S in raw fuel. Of all the sodium compounds, nepheline, thenardite and sodium sulfate are the most important forms of Na in solid com- bustion residues. Such a transformation of Na during the combustion of black liquor coal slurry resulted in a considerable impact on ash deposition and is not only different from the raw coal and papermaldng black liquors, but is also affected by local circum- stances in the combustion furnace. Amounts of Na, S and C1 in ash deposits from low temperature zones were larger than those from high temperature zones. Our findings should provide important theoretical instructions for industrial applications of black liquor coal slurry.展开更多
Studied forecasting and controlling the blasting fragmentation by using artifi- cial neural network for multi-ingredients. At the same time, according to the characteris- tic of multi-parameters input to network model...Studied forecasting and controlling the blasting fragmentation by using artifi- cial neural network for multi-ingredients. At the same time, according to the characteris- tic of multi-parameters input to network model, the gray correlation theory was employed to find out key factors, which can not only save time of computation and parameters in- put, but improve the stability of the model.展开更多
Wear particles of ultrahigh molecular weight polyethylene (UHMWPE) are the main cause of long-term failure of total joint replacements. Therefore, increasing its wear resistance or bioactivity will be very useful in...Wear particles of ultrahigh molecular weight polyethylene (UHMWPE) are the main cause of long-term failure of total joint replacements. Therefore, increasing its wear resistance or bioactivity will be very useful in order to obtain high quality artificial joints. In our study, UHMWPE composites filled with the bovine bone hydroxyapatite (BHA) were prepared by the method of compression moulding. A ball-on-disc wear test was carried out with a Universal Micro-Tribometer to investigate the friction and wear behavior of a Si3N4 ceramic ball, cross-sliding against the UHMWPE/BHA composites with human plasma lubrication. At the same time, the profiles of the worn grooves on the UHMWPE/BHA surface were scanned. The experimental results indicate that the addition of BHA to UHMWPE had a significant effect on the biotribological behavior of UHMWPE cross-sliding against the Si3N4 ceramic ball. The addition of BHA powder enhanced the hardness and modulus of elasticity of these composites and decreased the friction coefficients and wear rates under conditions of human plasma lubrication. When the added amount of BHA powders was up to 20%-30%, UHMWPE/BHA composites demonstrated the designed performance of the mechanical properties and biotribological behavior.展开更多
Increasing production and disposal of coal fly ash (CFA) is a matter of serious environment concern. However, CFA contains various beneficial metals and mineral matters whose demand is increasing in the industrializ...Increasing production and disposal of coal fly ash (CFA) is a matter of serious environment concern. However, CFA contains various beneficial metals and mineral matters whose demand is increasing in the industrialized world, while natural supplies are diminishing. Therefore, recovery of these potential resources from CFA can be an alternative way to save mineral resources, as well as to reduce the environmental burden of CFA disposal. There are numerous methods developed for the recovery of beneficial products from CFA. Based on the US patents and journal literatures, the present review describes the recovery status and technologies of major elements such as Al, Si, Fe and Ti, and trace elements such as V, Ga, Ge, Se, Li, Mo, U, Au, Ag, Pt groups and rare earth elements (REEs) and other beneficial products such as magnetic materials, cenospheres, and unburned carbon from CFA. It also highlights the recovery efficiency and drawbacks for their extraction, and suggests future research to develop satisfactory results in terms of selective recovery and purification.展开更多
The components of dust-suppressant were determined based on the analysis on characteristics and mechanisms of road dust raising in open-pit mines. The components were initially selected from moisture agent, coagulatio...The components of dust-suppressant were determined based on the analysis on characteristics and mechanisms of road dust raising in open-pit mines. The components were initially selected from moisture agent, coagulation agent and surfactant. The optimal formulation was determined based on orthogonal test and using the water loss rate as the evaluation index. The performances of moisture releasing and adsorption, wind resistance of optimal formulation in the natural environment were tested. The results show that the formula obtained in experiments provide a good performance of moisture absorption and water retention, and it also had a good dust preventing and controlling performance due to its high surface strength and consolidation under dry conditions. It has good application prospects considering the wide variety of sources for materials and the simple preparation process.展开更多
The sulfide passivation film produced on the surface seriously prevents further reaction in the process of using monoclinic pyrrhotite(MPr)to treat heavy metal ions in wastewater.Ultrasonic technology was introduced t...The sulfide passivation film produced on the surface seriously prevents further reaction in the process of using monoclinic pyrrhotite(MPr)to treat heavy metal ions in wastewater.Ultrasonic technology was introduced to assist MPr to recover the copper ions.XPS result proves that CuS products exist on the surface of MPr.XRD and SEM results show that the CuS on the particles’surface is stripped under ultrasonic condition.The kinetics results indicate that the reaction under both conventional and ultrasonic conditions conform to the Avrami model.The reaction process changes from diffusion control to chemical reaction control under the ultrasonic condition as the solid layer is stripped off.The presence of ultrasonic significantly reduces the acidity and temperature required for the reaction and enhances the utilization efficiency of MPr;by controlling the amount of MPr,the removal rates of copper and arsenic in copper smelting dust leachate exceed 99%and 95%,respectively.展开更多
The time-dependent rheological behaviors of alkali-activated cement(AAC)are expected to be precisely controlled,in order to meet the requirements of modern engineering practices.In this paper,the effects of activator,...The time-dependent rheological behaviors of alkali-activated cement(AAC)are expected to be precisely controlled,in order to meet the requirements of modern engineering practices.In this paper,the effects of activator,including the Na_(2)O concentration and SiO_(2)/Na_(2)O(S/N)molar ratio,on the rheological behavior of alkali-activated slag fly ash pastes were investigated.The small amplitude oscillatory shear(SAOS)and shear test were used to evaluate the structural build-up and flowability of pastes.Besides,zeta potential measurement,calorimetric test and thermogravimetric analysis(TGA)were carried out to reveal the physico-chemical mechanisms behind the rheological evolution of fresh pastes.It was found that high Na_(2)O concentration and low S/N molar ratio improved the flowability and structural build-up rate of paste.Moreover,the structural build-up of alkali-activated slag-fly ash pastes consists of two stages,which is controlled by the dissolution of solid reactants and formation of C-(A)-S-H gels,respectively.展开更多
The mineral stability and solute activities of soil solution extracted from selected horizons of seven studied pedons of Alfisols in Kentucky, USA, and the relationship between distribution of iron-manganese concretio...The mineral stability and solute activities of soil solution extracted from selected horizons of seven studied pedons of Alfisols in Kentucky, USA, and the relationship between distribution of iron-manganese concretions and the restrictive layers were investigated. The results showed that the genesis and development of these soils and mineral weathering trends were strongly influenced by the depth of bedrock and the presence of perched water tables at lithic (limestone) interfaces due to the dissolution and buffering effect of limestone bedrock. The extractable Mg/Ca ratio as depth function and soil depth above bedrock could be used as indices of weathering and degree of soil development. Maximum iron-manganese concretion accumulation was found to occur in the horizon overlying clay horizon (>40% clay) with a sharp increase in clay content (>10%), which suggested that zones of Fe-Mn concretion accumulation in soils of the Inner Bluegrass Region appeared to be a sensitive genetic indicator of argillic horizons with restrictive permeability.展开更多
基金financially supported from the National Natural Science Foundation of China(No.52164021)the Natural Science Foundation of Yunnan Province,China(No.2019FB078)。
文摘The lime-depressed pyrite from Cu differential flotation tailings with acid mine drainage(AMD)as a natural activator was recovered.The effect of AMD on lime-depressed pyrite flotation was investigated by a series of laboratory flotation tests and surface analytical techniques.Flotation test results indicated that AMD could effectively activate the pyrite flotation with a sodium butyl xanthate(SBX)collector,and a high-quality sulfur concentrate was obtained.Pulp ion concentration analysis results indicated that AMD facilitated desorption of Ca^(2+)and adsorption of Cu^(2+)on the depressed-pyrite surface.Adsorption measurements and contact angle analysis results confirmed that adding AMD improved the adsorption amount of SBX collector on the pyrite surface and increased the contact angle by 31°.Results of Raman spectroscopy and X-ray photoelectron spectroscopy analysis indicated that AMD treatment promoted the formation of hydrophobic species(S^(0) hydrophobic entity and copper sulfides)and the removal of hydrophilic calcium and iron species on the pyrite surface,which reinforced the adsorption of collector.The findings of the present research provide important theoretical basis and technical support for a cleaner production of copper sulfide ores.
文摘Ordovician limestone water is coal mines. In this paper, we analyze the the main source of water inrush in North China characteristic of three kinds of nonlinear seismic attributes, such as the largest lyapunov exponent,fractal dimension and entropy and introduce their calculation methods. Taking the 81st and 82nd coal districts in the Xutuan coal mine as examples, we extract the three seismic attributes based on the 3D prestack migration seismic data of this area, which can display the Ordovician limestone fracture distribution in the mine. We comprehensively analyzed the three nonlinear seismic attributes and compared the results with transient electromagnetic exploration results and determined the possible Ordovician limestone aquosity distribution. This demonstrated that the nonlinear seismic attributes technology is an effective approach to predict the aquosity of Ordovician limestone.
基金National Key Basic Research Support Foundation (NKBRSF) of China(No. G1999011807) the Joint Open Laboratory of Soil and Environment between the Institute of Soil Science of the Chinese Academy of Sciences and Hong Kong Baptist University.
文摘The capacities of two arbuscular mycorrhizal (AM) fungi, Glomusmosseae and Glomus versiforme, to mineralize added organic P werestudied in a sterilized clacareous soil. Mycorrhizal (inoculated witheither of the AM fungi) and non-mycorrhizal red clover (Trifoliumpratense L.) plants were grown for eight weeks in pots with upperroot, central hyphal and lower soil compartments. The hyphal and soilcompartments received either organic P (as Na-phytte) or inorganic P(as KH_2PO_4) at the rate of 50 mg P kg^-1. No P was added to theroot compartments.
文摘Dust suppression in coal mines is a worldwide problem which has not been solved effectively. The applica-tion of negative pressure secondary dust removal (NPSDR) is a breakthrough in the coal mine safety field. In this paper,NPSDR technology and ultrasonic dust suppression systems are introduced. High pressure water is supplied to the NPSDR device which is mounted on the shearer. A negative pressure field is formed in the device. At the same time,the dusty air around the shearer drum will be sucked into,and purged from,the NPSDR device by the negative pressure field. An ultrasonic dust suppression system uses water and compressed air to produce micron sized droplets which suppress respirable coal dust effectively. The NPSDR technology can be used for shearer dust suppression while ultra-sonic dust suppression can be applied in areas such as the transportation positions. These dust suppression methods have the following advantages: high efficiency,wide applicability,simple structure,high reliability and low cost.
文摘Accurate detection and picking of the P-phase onset time in noisy microseismic data from underground mines remains a big challenge. Reliable P-phase onset time picking is necessary for accurate source location needed for planning and rescue operations in the event of failures. In this paper, a new technique based on the discrete stationary wavelet transform (DSWT)and higher order statist!cs, is proposed for processing noisy data from underground mines. The objectives of this method are to (1) Improve manual detection and tPicking of P-phase onset; and (ii) provide an automatic means of detecting and picking P-phase onset me accurately. The DSWT is first used to filter the signal over several scales. The manual P-phase onset detection and picking are then obtained by computing the signal energy across selected scales with frequency bands that capture the signal of interest. The automatic P-phase onset, on the other hand, is achieved by using skewness- and kurtosis-based criterion applied to selected scales in a time-frequency domain. The method was tested using synthetic and field data from an underground limestone mine. Results were compared with results obtained by using the short-term to long-term average (STA/LTA) ratio and that by Reference Ge et al. (2009). The results show that the me!hod provides a more reliable estimate of the P-phase onset arrival than the STA]LTA method when the signal to noise ratio is very low. Also, the results obtained from the field data matched accurately with the results from Reference Ge et al. (2009).
基金Project(2016YFB0301104)supported by National Key Research and Development Program of China
文摘The grain refinement of the as-cast AZ31 alloys by limestone particles was investigated by grain refining tests and microstructure observations. The results show that the limestone particles have a good grain refining potency, which is deeply related to the addition level of limestone and melting temperature. The optimal addition level and melting temperature are 2.0%(mass fraction) and 720 ℃, respectively. The average grain size of AZ31 alloy is reduced from(556±60) to(236±22) μm. The sound grain refining by raw limestone particles has a good anti-fading capacity without any significant grain coarsening in a 40 min holding time. The concerned grain refining mechanism should be attributed to the inoculated Al-C and Al-C/Al-Mn-(Fe) nuclei. Ultrasonic treatment can enhance the grain refining efficiency of limestone particles through cavitation-enhanced nucleation mechanism.
文摘The current research was investigated the mechanism of coal demineralization and the effect of leaching parameters on high ash coal and study the characterization of pre and post-treated coal. The two high ash Indian coal selected from Mahanadi Coalfield Limited, Odisha, pulverized to 375, 230 and 180 gm particle size were undergone simultaneous acid and alkali treatment at a different concentration, temperature and time. The percent demineralization was increased with decrease the size of the particle and rises with leaching parameters. The investigation suggested 180 μm particle size offers efficient demineralization for both coals at 30% NaOH and 30% H2SO4 concentration. The alkali leaching leads to obtaining the demineralization 46% and 42% whereas acid treatment resulted in 34% and 32% of the original coal samples. The extent of demineralization was improved the calorific value of coal. Besides, the degree of demineralization was proved from the FTIR, XRF and FESEM-EDX analysis results. FTIR analysis result showed that the peak intensity of mineral band decreased by the leaching effect and the degree of demineralization was significantly obtained to large extent by the X-ray Fluorescence spectrometer; which elucidates major minerals removed from coal by the leaching effect of acid and alkali solution.
文摘The effect of removing pyrite and ash ffom fine coal with electrostatic separator is determined by the electric property of coal, the distribution of corona ion and etectrostatic field, and the disperse and even feed. The dielectric constant of coal and mineral matter is studied in this paper and the amendment has been made to survey theory. The oscillogram is adopted to study the distribution of corona ion and electrostatic field.The paper details the study of remoing pyrite and ash from fine coal, and the test results demonstrate the high efficiency of removing pyrite and ash with electrostatic separator.
文摘The generally used methods of forecasting coal requirement quantity include the analogy method, the outside push method and the cause effect analysis method. However, the precision of forecasting results using these methods is lower. This paper uses the grey system theory, and sets up grey forecasting model GM (1, 3) to coal requirement quantity. The forecasting result for the Chinese coal requirement quantity coincides with the actual values, and this shows that the model is reliable. Finally, this model are used to forecast Chinese coal requirement quantity in the future ten years.
基金conducted as part of the research program of the Office of Mine Safety and Health Research of the National Institute for Occupational Safety and Health(NIOSH)
文摘A limestone mine in Ohio has had instability problems that have led to massive roof falls extending to the surface. This study focuses on the role that weak, moisture-sensitive floor has in the instability issues.Previous NIOSH research related to this subject did not include analysis for weak floor or weak bands and recommended that when such issues arise they should be investigated further using a more advanced analysis. Therefore, to further investigate the observed instability occurring on a large scale at the Ohio mine, FLAC3 D numerical models were employed to demonstrate the effect that a weak floor has on roof and pillar stability. This case study will provide important information to limestone mine operators regarding the impact of weak floor causing the potential for roof collapse, pillar failure, and subsequent subsidence of the ground surface.
基金Project supported by Technology Development and Research Special Foundation of National Science Research Academicand Institute , China
文摘Based on various ultrasonic loss mechanisms, the formula of the cumulative mass percentage of minerals with different particle sizes was given, with which the particle size distribution was integrated into an ultrasonic attenuation model. And then the correlations between the ultrasonic attenuation and the pulp density, and the particle size were obtained. The derived model was combined with the experiment and the analysis of experimental data to determine the inverse model relating ultrasonic attenuation coefficient with size distribution. Finally, an optimization method of inverse parameter, genetic algorithm was applied for particle size distribution. The results of inverse calculation show that the precision of measurement was high.
基金Projects 2004CB217701 supported by the National Basic Research Program of China 2005-1 by the Scientific Research Foundation of the Ministry ofEducation of Hebei Province
文摘Several typical ash samples from a 0.25 MW test furnace fired black liquor coal slurry were selected for investigation. The phases and compounds containing sodium in ash samples were acquired from X-ray diffraction analyses. As well, detailed analyses of the amounts of major mineral elements along thickness gradients of representative ash samples were carried out. The elements, including Na, Si, A1, S and C1 were analyzed by the advanced electron probe microanalyzer equipment, which provid evidence and interpretation for the analytical results of XRD. The findings indicate that the occurrence form of sodium has experi- enced important changes during the combustion of black liquor coal slurry, which translated into nepheline, thenardite, sodium sulfate, sodium chloride, sodium silicoaluminate, hanyne and other phases containing sodium, from NaOH, Na2CO3 and Na2S in raw fuel. Of all the sodium compounds, nepheline, thenardite and sodium sulfate are the most important forms of Na in solid com- bustion residues. Such a transformation of Na during the combustion of black liquor coal slurry resulted in a considerable impact on ash deposition and is not only different from the raw coal and papermaldng black liquors, but is also affected by local circum- stances in the combustion furnace. Amounts of Na, S and C1 in ash deposits from low temperature zones were larger than those from high temperature zones. Our findings should provide important theoretical instructions for industrial applications of black liquor coal slurry.
文摘Studied forecasting and controlling the blasting fragmentation by using artifi- cial neural network for multi-ingredients. At the same time, according to the characteris- tic of multi-parameters input to network model, the gray correlation theory was employed to find out key factors, which can not only save time of computation and parameters in- put, but improve the stability of the model.
基金support from Na-tional Nature Science Foundation of China (50535050) Program for New Century Excellent Talents in University (NCET-06-0479).
文摘Wear particles of ultrahigh molecular weight polyethylene (UHMWPE) are the main cause of long-term failure of total joint replacements. Therefore, increasing its wear resistance or bioactivity will be very useful in order to obtain high quality artificial joints. In our study, UHMWPE composites filled with the bovine bone hydroxyapatite (BHA) were prepared by the method of compression moulding. A ball-on-disc wear test was carried out with a Universal Micro-Tribometer to investigate the friction and wear behavior of a Si3N4 ceramic ball, cross-sliding against the UHMWPE/BHA composites with human plasma lubrication. At the same time, the profiles of the worn grooves on the UHMWPE/BHA surface were scanned. The experimental results indicate that the addition of BHA to UHMWPE had a significant effect on the biotribological behavior of UHMWPE cross-sliding against the Si3N4 ceramic ball. The addition of BHA powder enhanced the hardness and modulus of elasticity of these composites and decreased the friction coefficients and wear rates under conditions of human plasma lubrication. When the added amount of BHA powders was up to 20%-30%, UHMWPE/BHA composites demonstrated the designed performance of the mechanical properties and biotribological behavior.
文摘Increasing production and disposal of coal fly ash (CFA) is a matter of serious environment concern. However, CFA contains various beneficial metals and mineral matters whose demand is increasing in the industrialized world, while natural supplies are diminishing. Therefore, recovery of these potential resources from CFA can be an alternative way to save mineral resources, as well as to reduce the environmental burden of CFA disposal. There are numerous methods developed for the recovery of beneficial products from CFA. Based on the US patents and journal literatures, the present review describes the recovery status and technologies of major elements such as Al, Si, Fe and Ti, and trace elements such as V, Ga, Ge, Se, Li, Mo, U, Au, Ag, Pt groups and rare earth elements (REEs) and other beneficial products such as magnetic materials, cenospheres, and unburned carbon from CFA. It also highlights the recovery efficiency and drawbacks for their extraction, and suggests future research to develop satisfactory results in terms of selective recovery and purification.
文摘The components of dust-suppressant were determined based on the analysis on characteristics and mechanisms of road dust raising in open-pit mines. The components were initially selected from moisture agent, coagulation agent and surfactant. The optimal formulation was determined based on orthogonal test and using the water loss rate as the evaluation index. The performances of moisture releasing and adsorption, wind resistance of optimal formulation in the natural environment were tested. The results show that the formula obtained in experiments provide a good performance of moisture absorption and water retention, and it also had a good dust preventing and controlling performance due to its high surface strength and consolidation under dry conditions. It has good application prospects considering the wide variety of sources for materials and the simple preparation process.
基金the National Key Scientific Research Project,China(Nos.2018YFC1901601,2018YFC1901602)the Fundamental Research Funds for the Central Universities of Central South University,China(No.2021zzts0307)+2 种基金the National Natural Science Foundation of China(No.51804340)the Innovation-driven Plan of Central South University,China(No.2018CX036)the Collaborative Innovation Center for Clean and Efficient Utilization of Strategic Metal Mineral Resources,China,and Key Laboratory of Hunan Province for Clean and Efficient Utilization of Strategic Calcium-containing Mineral Resources,China(No.2018TP1002).
文摘The sulfide passivation film produced on the surface seriously prevents further reaction in the process of using monoclinic pyrrhotite(MPr)to treat heavy metal ions in wastewater.Ultrasonic technology was introduced to assist MPr to recover the copper ions.XPS result proves that CuS products exist on the surface of MPr.XRD and SEM results show that the CuS on the particles’surface is stripped under ultrasonic condition.The kinetics results indicate that the reaction under both conventional and ultrasonic conditions conform to the Avrami model.The reaction process changes from diffusion control to chemical reaction control under the ultrasonic condition as the solid layer is stripped off.The presence of ultrasonic significantly reduces the acidity and temperature required for the reaction and enhances the utilization efficiency of MPr;by controlling the amount of MPr,the removal rates of copper and arsenic in copper smelting dust leachate exceed 99%and 95%,respectively.
基金Project(2017 YFB 0310100)supported by National Key R&D Program of ChinaProjects(51778629,51922109)supported by the National Natural Science Foundation of ChinaProjects(2020 zzts 617,2020 CX 011)supported by the Innovation-Driven Project of Central South University,China。
文摘The time-dependent rheological behaviors of alkali-activated cement(AAC)are expected to be precisely controlled,in order to meet the requirements of modern engineering practices.In this paper,the effects of activator,including the Na_(2)O concentration and SiO_(2)/Na_(2)O(S/N)molar ratio,on the rheological behavior of alkali-activated slag fly ash pastes were investigated.The small amplitude oscillatory shear(SAOS)and shear test were used to evaluate the structural build-up and flowability of pastes.Besides,zeta potential measurement,calorimetric test and thermogravimetric analysis(TGA)were carried out to reveal the physico-chemical mechanisms behind the rheological evolution of fresh pastes.It was found that high Na_(2)O concentration and low S/N molar ratio improved the flowability and structural build-up rate of paste.Moreover,the structural build-up of alkali-activated slag-fly ash pastes consists of two stages,which is controlled by the dissolution of solid reactants and formation of C-(A)-S-H gels,respectively.
基金Project (No. Y97D02061) supported by the Natural Science Foundation of Shandong Province, China.
文摘The mineral stability and solute activities of soil solution extracted from selected horizons of seven studied pedons of Alfisols in Kentucky, USA, and the relationship between distribution of iron-manganese concretions and the restrictive layers were investigated. The results showed that the genesis and development of these soils and mineral weathering trends were strongly influenced by the depth of bedrock and the presence of perched water tables at lithic (limestone) interfaces due to the dissolution and buffering effect of limestone bedrock. The extractable Mg/Ca ratio as depth function and soil depth above bedrock could be used as indices of weathering and degree of soil development. Maximum iron-manganese concretion accumulation was found to occur in the horizon overlying clay horizon (>40% clay) with a sharp increase in clay content (>10%), which suggested that zones of Fe-Mn concretion accumulation in soils of the Inner Bluegrass Region appeared to be a sensitive genetic indicator of argillic horizons with restrictive permeability.