北京地铁“环线”电动车辆的技术改造

介绍了北京地铁“环线”(二期工程 )多年来对国产电动客车电气系统、风动门、风源系统的改进以及斩波调压车技术改造的内容和过程。从北京地铁使用国产地铁车辆的经验 。

Differential utilization of cyclic, orthorhombic α- and chain-like polymeric μ-sulfur by Acidithiobacillus ferrooxidans

The differential utilization of cyclic, orthorhombic α-sulfur （α-S） and chain-like polymeric g-sulfur （μ-S） by Acidithiobacillus ferrooxidans was investigated. The growth and sulfur oxidation results indicated that utilization of μ-S by A. ferrooxidans was clearly different from α-S. Even if the planktonic cells were produced, the fall of pH and the rise of sulfate concentration were the same after 300 h on each substrate, the speeds of the planktonic cells increase, pH decrease and sulfate concentration increase in the earlier cultivation stage were faster on polymeric sulfur compared with the orthorhombic form. The adsorption capacity of the cells was higher on μ-S than on α-S, The results of SEM, DRIFTS and XRD analyses indicated that the surfaces of α-S and μ -S were modified differently by cells. Differential expression of 11 selected sulfur adsorption-activation and metabolism relevant genes was detected by RT-qPCR. The results showed that the expression of the hydrophobic substrate transport proteins and the sulfur metabolism related proteins was up-regulated, and the adsorption and activation related proteins were down-regulated when the cells were grown on μS, suggesting that μ-S could be more easily bio-adapted and activated than α-S.

Review of Kelvin's Equation and Its Modification in Characterization of Mesoporous Materials

Physical and mathematical models as well as calculation methods of nitrogen bed on porous media have been introduced to evaluate the structural parameters of mesoporous materials. Kelvin＇s equation is a link between the relative adsorbate pressure, the mean pore radius, and pore capillarity on the basis of macroscopic capillary condensation. However, Kelvin＇s equation has been identified that it underestimates the calculated pore size of a material especially in the boundary of pore size which is between 2 and 4 nm.Various modifications on Kelvin＇s equation were mentioned in order to develop a new model to improve the accuracy of pore size calculation. The problems on conventional mathematical models were analyzed and discussed. A number of calculation methods on physisorption and pore size, especially fundamental theories of physisorption, basis of models and their deficiencies are reviewed. It can provide guidance on developing a modified Kelvin＇s equation for pore size calculation.

Key Techniques of Frequency Synthesizer for WLAN Receivers

Several key techniques for a PLL-type frequency synthesizer for WLAN receivers are studied. Its structure is analyzed and the main parameters are proposed. A monolithic LC-tuned voltage controlled oscillator （LCVCO） with low phase noise is fabricated with TSMC 0.18μm RF （radio frequency） CMOS technology. The measured phase noise is - ll7dBc/Hz at 4MHz off the center frequency of 4. 189GHz. A down-scaling circuit with low power dissipation was fabricated in a TSMC 0.18μm mixed-signal CMOS process. The measured results show that the IC can work well under a 1.8V power supply. Its total power dissipation is only 13mW.

An Optimal Model for Carbon Sinks of CDM Project to Build a New Countryside Based on Cyclic Economy under Uncertainty

Based on the status and characteristics of Clean Development Mechanism （CDM） renewable energy project and the mode of cyclic economy, aimed at achieving the maximum capacity of carbon sinks in the system, Lvjin Jiayuan—New Countryside Distripark CDM project in Wuchuan County was taken as an example for developing an interval linear programming （ILP） model to optimize the crops planting scheme and cows breeding scheme by using interval optimal method. The case showed that the optimized crops planting scheme and cows breeding scheme obtained from the optimal model was reasonable with relatively preferable overall performance. In the context of meeting economic benefits and fertilizer, electricity demand, [231 287.8, 273 312.7] t of CO2 could be absorbed and fixed, which had increased by [12.94, 33.46]% compared with the feasibility scheme of case project and provided technical support for making the decision in CDM project.

Backlash Nonlinear Compensation of Servo Systems Using Backpropagation Neural Networks

Aim To eliminate the influences of backlash nonlinear characteristics generally existing in servo systems, a nonlinear compensation method using backpropagation neural networks(BPNN) is presented. Methods Based on some weapon tracking servo system, a three layer BPNN was used to off line identify the backlash characteristics, then a nonlinear compensator was designed according to the identification results. Results The simulation results show that the method can effectively get rid of the sustained oscillation(limit cycle) of the system caused by the backlash characteristics, and can improve the system accuracy. Conclusion The method is effective on sloving the problems produced by the backlash characteristics in servo systems, and it can be easily accomplished in engineering.

Adaptive Nonlinear PID Control and Rule-Based Compensation for Systems with Backlash

The control of dynamic nonlinear systems with unknown backlash was considered. By using an efficient approach to estimate the unknown backlash parameters, a rule? based backlash compensator was presented for canceling the effect of backlash. Adaptive nonlinear PID controller together with rule? based backlash compensator was developed and a satisfactory tracking performance was achieved. Simulation results demonstrated the effectiveness of the proposed method.

Radial Based Probabilistic Roadmap Motion Planning Method in Sparse Environment

A new dynamic path planning method in high dimensional workspace, radial based probabilistic roadmap motion (RBPRM) planning method, is presented. Different from general probabilistic roadmap motion planning methods, it uses straight lines as long as possible to construct a path graph, so the final path obtained from the graph is relatively shorter and straighter. Experimental results show the efficiency of the algorithm in finding shorter paths in sparse environment.

A Novel ADC Architecture for Digital Voltage Regulator Module Controllers

The design and implementation of a novel ADC architecture called ring-ADC for digital voltage regulator module controllers are presented. Based on the principle of voltage-controlled oscillators＇ transform from voltage to frequency,the A/D conversion of ring-ADC achieves good linearity and precise calibration against process variations compared with the delay-line ADC. A differential pulse counting discriminator also helps decrease the power consumption of the ring-ADC. It is fabricated with a Chartered 0.35μm CMOS process, and the measurement results of the integral and differential nonlinearity performance are 0.92LSB and 1.2LSB respectively. The maximum gain error measured in ten sample chips is ± 3.85%. With sampling rate of 500kHz and when the voltage regulator module （VRM） works in steady state, the ring-ADC＇s average power consumption is 2.56mW. The ring-ADC is verified to meet the requirements for digital VRM controller application.

Experimental study on dynamic modulus of thermosetting epoxy asphalt mixture for steel deck pavement

In order to study the dynamic performance of the thermosetting epoxy asphalt mixture（EAM）, an experimental program on the dynamic modulus E is conducted. First, E of the EAM under different temperatures and frequencies are tested through the simple performance test（SPT）, and the effects of temperatures and frequencies on the dynamic modulus of the EAM are analyzed. Secondly, the static modulus of the EAM and the dynamic modulus of other two ordinary mixtures are tested and compared to E of the EAM. Finally the dynamic modulus master curve is constructed using the time-temperature superposition principle. The results show that the E values increase with the increase in the test frequency while on the other hand, the E values decrease with the increase in the test temperature. It also can be seen from the results that the dynamic modulus corresponding to the actual vehicle mode is significantly greater than the static modulus, and the dynamic modulus of the EAM is greater than that of SBS mixtures and the common hot mixed asphalt （HMA）. The study results can provide a theoretical basis for the design and mechanical analysis of the steel deck pavement.

Direct Synthesis of High Purity Silicon Wires by Electrorefining in Molten KF-NaF Eutectic

The electrochemical synthesis silicon wires by electrorefining metallurgical grade silicon in thermally dried and pre-electrolyzed molten KF-NaF eutectic were studied at temperatures 800-900 ℃ using cyclic voltammetry and ac impedance. One oxidation peak at -0.14 V could be attributed to the reaction of Si to Si4＋. A cathodic peak occurred at -0.56 V in the cyclic voltammogram and one response semicircle in the ac impedance spectrum was observed, supporting a one-step electrochemical reduction process of Si4＋-→Si. The electrochemical reaction of silicon was controlled by the diffusion process. The purity of electrorefined silicon wires was up to 99.999% by ICP-MS analysis.

Effects of polyaniline on electrochemical properties of composite inert anodes used in zinc electrowinning

In order to search for a suitable anode material used in zinc electrowinning in place of Pb-Ag alloy,Al/Pb-PANI（polyaniline）-WC（tungsten carbide） composite inert anodes were prepared on aluminum alloy substrate by double pulse electrodeposition（DPE） of PANI and WC particles with Pb2＋ from an original plating bath.Thereafter,anodic polarization curves,cyclic voltammetry curves and Tafel polarization curves for the composite inert anodes obtained under different PANI concentrations in the original plating bath were measured,and the microstructural features were also investigated by scanning electron microscopy（SEM）.The results show that Al/Pb-PANI-WC composite inert anode obtained under PANI concentration of 20 g/L in the original plating bath possesses uniform microstructures and composition distributions,higher electrocatalytic activity,better reversibility of electrode reaction and corrosion resistance in a synthetic zinc electrowinning electrolyte of 50 g/L Zn2＋,150 g/L H2SO4 at 35 °C.Compared with Pb-1%Ag alloy,the overpotential of oxygen evolutions for the composite inert anode are decreased by 185 mV and 166 mV,respectively,under 500 A/m2 and 1000 A/m2.

An Analog Equalizer and Baseline-Wander Cancelle rfor 100/1000Base-TX Transceiver

A frequency-domain equalizer with a mixed-signal adaptive control loop and a novel baseline wander （BLW） canceller are proposed. The equalizer is independent of channel-modeling accuracy,and its control loop is intrinsically stable. An AGC function is incorporated into the equalizer without an extra AGC circuit. The proposed BLW canceller uses a peak detector to monitor the BLW and full feedback method to accomplish BLW canceling. High canceling accuracy and robust performance are achieved. The circuits are tested in 0.25μm CMOS technology. Better performance and smaller silicon area are achieved compared with results in the literature.

A Study on the Multi-Compartment Linear Circulation Pharmacokinetic Model for the Targeting Drug Delivery System

By analyzing the observed phenomena and the data collected in the study, a multi-compartment linear circulation model for targeting drug delivery system was developed and the function formulas of the drug concentration-time in blood and target organ by computing were figured out. The drug concentration-time curve for target organ can be plotted with reference to the data of drug concentration in blood according to the model. The pharmacokinetic parameters of the drug in target organ could also be obtained. The practicability of the model was further checked by the curves of drug concentration-time in blood and target organ(liver) of liver-targeting nanoparticles in animal tests. Based on the liver drug concentration-time curves calculated by the function formula of the drug in target organ, the pharmacokinetic behavior of the drug in target organ(liver) was analyzed by statistical moment, and its pharmacokinetic parameters in liver were obtained. It is suggested that the (relative targeting index( can be used for quantitative evaluation of the targeting drug delivery systems.

Enhancing corrosion resistance of 7150 Al alloy using novel three-step aging process

The effects of a novel three-step aging process （T76＋T6） on the electrochemical corrosion behavior of 7150 extruded aluminum alloy were evaluated and compared with those of the conventional retrogression and re-aging process （T77）. The open circuit potential （OCP）, cyclic polarization and electrochemical impedance spectra （EIS） of the A1 alloys were measured after treatment in three solutions （3.5% NaCl （mass fraction）; 10 mmol/L NaCl ＋ 0.1 mol/L Na2SO4; 4 mol/L NaCl ＋ 0.5 mol/L KNO3 ＋ 0.1 mol/L HNO3）. The parameters including the corrosion potential, pitting potential, pit transition potential and steepness, and potential differences were extensively discussed to evaluate the corrosion behavior of the Al alloys. The electrochemical and scanning electron microscopy （SEM） data show that compared with the 7150-T77 Al alloy, the T76 ＋ T6 aged 7150 A1 alloy exhibits better resistance to pitting corrosion, inter-granular corrosion （IGC） and exfoliation corrosion, which is attributed to further coarsening and inter-spacing of the grain boundary particles （GBPs） as revealed by transmission electron microscopy. Furthermore, the hardness tests indicate that an attractive combination of strength and corrosion resistance was obtained for the 7150 Al alloy with T76 ＋ T6 treatment.

Channel＇s Concurrence and Quantum Teleportation

Concurrence can measure the entanglement property of a system. If the channel is a pure state, positive concurrence state can afford the good performance in the teleportation process. If the channel ia a mixed state, positive concurrence state cannot assure the good performance in the teleportation. The conditions of the positive concurrence and the quantum teleportation in the Heisenberg spin ring is derived.

Key Environmental Factors Monitoring System of Low-power Greenhouse Based on WSN Technology

A low-power environmental monitoring system based on WSN technology is proposed to effectively monitor the environmental status and ensure the healthy growth of greenhouse crops in the greenhouse. The system performs dynamic mon- itoring on the environmental data of temperature, humidity, illumination, soil tempera- ture and humidity of the greenhouse, and it reduces the energy consumption by us- ing solar energy and lithium battery as the power supply mode and dynamic power management algorithm combined with improved routing protocol. Stable and reliable, the system could effectively monitor the key environmental factors in the green- house, making it of certain promotion value.

Establishment of Reverse-transcription Loopmediated Isothermal Amplification Method for Detection of Wheat Streak Mosaic Virus

A reverse-transcription loop-mediated isothermal amplification （RT-LAMP） method was established for the detection of wheat streak mosaic virus （WSMV）. Ac-cording to the conservative regions of the genes that encode the coat protein of WSMV, 2 pairs of primers were designed. Final y, the 1st pair of primers was select-ed through the specificity test. The sensitivity test showed the sensitivity of RT-LAMP method was 10 times higher than that of RT-PCR. In addition, the amplifica-tion of target gene could be judged visual y from the presence of fluorescence （cal-cein） in the final reaction system. The RT-LAMP method, established in this study, was rapid, easy, specific and sensitive. Moreover, it did not require sophisticated equip-ment. The RT-LAMP was suitable for the rapid detection of WSMV.

Wavelet neural network based fault diagnosis in nonlinear analog circuits

The theories of diagnosing nonlinear analog circuits by means of the transient response testing are studled. Wavelet analysis is made to extract the transient response signature of nonlinear circuits and compress the signature dada. The best wavelet function is selected based on the between-category total scatter of signature. The fault dictionary of nonlinear circuits is constructed based on improved back-propagation（BP） neural network. Experimental results demonstrate that the method proposed has high diagnostic sensitivity and fast fault identification and deducibility.

The first complete mitogenome of Cyclommatus stag beetles(Coleoptera: Lucanidae) with the phylogenetic implications

The first complete mitogenome of Cyclommatus stag beetles, Cyclommatus vitalisi（Coleoptera： Lucanidae） is sequenced using the next generation sequening. The genomic structure is a closed circular molecule with 17,853 bp in length, comprising 13 protein-coding genes, 22 transfer RNA genes（t RNAs）, 2 ribosomal RNAs（r RNAs） and a control region. The sequence has neither a gene rearrangement nor a non-coding region. The nucleotide composition is A（36. 31%）, C（21. 48%）, T（31. 20%） and G（11. 01%）, with overall AT content of 73. 61%. The phylogenetic analysis of 13 stag beetles and another three scarab beetles show that Cyclommatus vitalisi shares a close ancestry with Lucanus mazama and Lucanus fortunei.