解读“生产物流”

中国制造业经过20余年市场经济的洗礼以及与跨国公司的艰苦碰撞,多数决策者已经学会了诸如品牌推广、渠道拓展、价格大战、服务经济等争战城池的战略战术。然而,当市场的成长速度放缓,当竞争对手势均力敌,单纯凭借销售整合、产品整合保持并增长利润额的时代正让位于生产物流的重新整合,获取最大化的利润空间。

Biomass, litterfall and the nutrient fluxes in Chinese fir stands of different age in subtropical China

Chinese fir (Cunninghamia lanceolata (Lamb.) Hook.), a fast-growing, ever-green conifer tree with high yield and excellent quality, is the most important tree species of timber plantations in subtropical China. We investigated the characteristics of biomass, litterfall and nutrient fluxes in the 8, 14 and 24 year-old stands, representing the young, middle-aged and mature stands. The results showed that Chinese fir plantations in central Fujian province had high productivity, and the proportion of stem mass in total biomass was between 50%-70%. Chinese fir was low nutrient-return tree species with litterfall. Nutrient withdrawal from senescing needles was a strong age-dependence for nitrogen, phosphorous and potassium in Chinese fir. With a management system of such short-rotation and continuously pure-crop planting, harvesting timber can lead to great nutrient loss, which may be one of the causes for site degradation.

Research on shipbuilding production logistics system combining MRP-Ⅱ with JIT

Shipbuilding production management and logistics control are studied so as to find an advanced shipbuilding production logistics management style.The necessity and feasibility to integrate MRP-Ⅱ(manufacture resource planning)and JIT(just-in-time)are researched properly following the comparison of MRP-Ⅱ and JIT and the analysis of shipbuilding production characteristics.A shipbuilding logistics system combining MRP-Ⅱ with JIT is set up and discussed according to a master production schedule(MPS),MRP and workshop-floor production control.The system is able to simplify the shipbuilding production plan,balance the workshop production,stabilize the supply,and inspire positivity and creativity so as to raise the shipbuilding production management level.

Impact of material and energy flow variation-based iron /steel ratio on production cost

This paper establishes a model for the production cost of iron and steel enterprise.The variation rule of the production cost versus the iron/steel ratio for two cases, namely,fixed steel production and a fixed amount of molten iron,is analyzed,and the concept of a steel scrap threshold price is proposed.According to the analysis results,when the steel scrap unit price exceeds the steel scrap threshold price, an increase in the iron/steel ratio can reduce the production cost,and vice versa.When the gap between the steel scrap unit price and the steel scrap threshold price is relatively large, the impact of the iron/steel ratio on the production cost is more prominent.According to the calculation example,when steel production is fixed （284 358 t/month）and the steel scrap unit price is 263.2 yuan/t more than the steel scrap threshold price,an increase of 0.01 in the iron/steel ratio causes a monthly production cost reduction of approximately 750 000 yuan （2.63 yuan/t）.When the amount of molten iron is fixed （270 425 t/month）and the steel scrap unit price is 140.7 yuan/t more than the threshold price,an increase of 0.01 in the iron/steel ratio causes a monthly production cost reduction of approximately 430 000 yuan （1.5 yuan/t）.The results indicate that iron and steel enterprise should adjust the production strategy in time when the scrap price fluctuates, and then the production cost will be reduced.

Rheological and Structural Properties of Sea Cucumber Stichopus japonicus During Heat Treatment

Changes in tissue structure, rheological properties and water content of raw and heated sea cucumber meat were studied. Sea cucumber Stichopus japonicus was heated at 25℃, 70℃ and 100℃ water for 5 min. The structural changes were observed using a light microscope and the rheological parameters （rupture strength, adhesive strength and deformation） determined using a texture meter. Microscopic photograph revealed that the structural change of heated meat was greater than that of raw meat. The rupture strength, adhesive strength and deformation of raw meat were smaller than those of the heated meat. Meanwhile, rheological parameters showed positive correlation with heating temperature. These changes are mainly caused by thermal denaturation and gelatinization of collagen during heating. These changes were also evidenced in observations using a light microscope and differential scanning calorimetry.

Postharvest Losses in the Wheat Logistics Chain： A Brazilian Case Study

This paper highlighted the losses occurring along the wheat supply chain in Rio Grande do Sul （RS）, Brazil, which accounts for almost half of the domestic wheat production. Based on a field research, a questionnaire was applied to representative agents in the market. Then the wheat supply chain in the state of RS was characterized and loss rates in each stage of that chain were quantified. Typically, losses during transportation in the domestic market account for about 11.8% of the total amount of wheat grain that leaves the farms. Losses during harvest and storage in cooperatives, which account for 93.2% of total losses, stand out in this context. Transportation operations account for 6.8% of total losses in the analyzed flow. Based on the results obtained in this study, strategies are suggested to reduce food losses in different links of the logistics chain, such as to evidence and quantify the wheat losses, to manage losses and set reduction targets and to give attention to transportation service levels.

Physical Effectiveness of Soil and Water Conservation Technologies in Drought Prone Areas of Western and Central Uganda

The effect of soil and water conservation （SWC） practices on controlling surface runoff and soil loss was studied in drought prone banana growing areas of Uganda, during the two major rainy seasons of 2014. The study was conducted at two sites-- Ntungamo （Southwest） and Sembabule （Central）, with comparable slopes of about 13%-25%. The treatments included mulch, manure, manure ＋ mulch and a control with no conservation. Results indicated that conservation practices of mulch and manure ＋ mulch significantly reduced surface runoff and soil loss by about 72%-85%, when compared to farmers＇ up-and-down cultivation practice （control）. It was also observed that significantly greater amounts of soil loss occurred from manure and control plots than the ones with mulch. Thus, the combination of manure and mulch is recommended for uptake by crop farmers in the study areas, if they are to overcome drought stress and adapt to changes in climate. More research is needed to quantify nutrient losses resulting from runoff under the different SWC techniques. Modeling such effects is essential in assessing the impacts of SWC practices on soil and crop productivity.

The Effect of Discharge Power on the Atmospheric Pressure Non-equilibrium Ar/O_2/TiCl_4 Plasma Deposition of TiO_2 Film

Deposition of TiO2 film from atmospheric pressure non- equilibrium Ar/O2/TiCl4 plasma was done to study the effect of discharge power during the film deposition process in this paper. TiO2 films with kinds of morphologies and controlled crystallization were deposited from mixtures of TiCl4 and O2 on quartz substrate by one step process. Scanning electron microscope （SEM） and transmission electron microscope （TEM） were used to analyze the morphology and crystallization of the deposited TiO2 films. It was found that the discharge power played a key role in the morphology and crystallization of the deposited TiO2 film whether the flow of TiCl4was large or small. When the flow of TiCl4 was large, the deposited TiO2 film was amorphous particles at low discharge power and was multi-crystalline at high discharge power. When the flow of TiCl4 was small, the deposited TiO2 film became more compact and the crystallization was enhanced as the discharge power increased. The dependence of the discharge current and the applied voltage with the discharge power indicated that it was a glow discharge. The gas temperature which increases with the discharge power is one of the main causes that affect the morphology and crystallization of the deposited film.

Biomarker Records of Phytoplankton Productivity and Community Structure Changes in the Central Yellow Sea Mud Area During the Mid-Late Holocene

The Yellow Sea （YS） environmental and ecological changes during the Holocene are driven by the interactions between the Yellow Sea Warm Current （YSWC）, the East Asian Winter Monsoon （EAWM） and the Kuroshio Current （KC）. We report marine biomarker records of brassicasterol, dinosterol and C37 alkenones in core ZY1 and core ZY2 from the South Yellow Sea （SYS） to reconstruct the spatial/temporal variations and possible mechanisms of phytoplankton primary productivity and community structure changes during the Mid-late Holocene. The contents of the corresponding biomarkers in the two cores are similar, and they also reveal broadly similar temporal trends. From 6kyr to 3kyr, the biomarker contents in the two cores were relatively low with small oscillations, followed by a distinct increase at about 3 kyr indicating productivity increases caused by a stronger EAWM. The alkenone/brassicasterol ratio （A/B） is used as a community structure proxy, which also showed higher values in both cores since 3 kyr, indicating increased haptophyte contribution to total productivity. It is proposed that the YS community structure has been mainly influenced by the YSWC, with stronger YSWC influences causing an increase in haptophyte contribution since 3 kyr. Some differences of the biomarker records between ZY2 and ZYI suggest spatial variations in response to YSWC and KC forcing. When the KC was intensified during the periods of 6-4.2kyr and 1.7-0kyr, the YSWC extended eastward, exerting more influence on core ZY1. On the other hand, when the KC weakened during 4.2-1.7 kyr, the YSWC extended westward, exerting more influence on the ZY2.

Heat Transfer Validation and Comparative Evaluation of Biochar Yield from Pyrolysis Cook Stove

The developing world still largely depends on biomass, such as wood, animal dung and agricultural waste for domestic fuel sources that are typically burned in traditional stoves. Ethiopia has different biomass resource for biochar production, through pyrolysis cook stove co-producing biochar. Coffee husks are the major solid residues from the handling and processing of coffee in the study area. This study was to evaluate the biochar co-producing pyrolysis cook stove with respect to heat transfer through the bed and biochar yield. From allothermal type of pyrolysis cook stove, the stove design was selected for both the computational fluid dynamic （CFD） simulation and experimental measurements. ANSYS 14.5 was used for CFD simulation of the wood combustion. The production of biochar from coffee husk, corncob and sawdust at different heating times, bed and stove surface temperature were undertaken. Bulk density, pH and surface area of the biochar were measured. While good agreement between simulation and experimental result was obtained in the conduction phase during pyrolysis, deviation between the two on account of the effect of volatile gas in changing the temperature trend within the biomass bed was noticed. Within the biomass type, the maximum mean biochar yield （38.91%） was seen from coffee husk. In the case of different stove designs, the minimum mean biochar yield （27.11%） was found from normal Anila stove. The pH of biochar is found to be significantly affected by the type of biomass （9.83 mean for corncob and coffee husk, 6.43 mean for sawdust）, heating time （9.19 mean for 90 min and 8.01 mean for 30 min） and stove type （9.52 mean for normal Anila and 8.01 mean for flangeless Anila continuous feeding type）. In fact, the type of biomass is observed to significantly affect the bulk density and surface area ofbiochar.

Study on the Self-supporting Logistics Mode based on B2C E-commerce Enterprises

Taking B2C E-commerce enterprises as the center, it can be divided into a set of logistics activities upstream supply chain logistics producer to B2C e-commerce enterprises, and the B2C e-commerce enterprise logistics to client consumer, and the paper focuses on the study of self-supporting logistics for the E-commerce enterprise. According to the development status of current B2C electronic commerce enterprise in our country and logistics, the paper study B2C electric business enterprise how to correctly choose the logistics mode and how to promote the business logistics operation level.