The redundancy technology for the aircraft multi-channel DC electrical power supply system is studied. In this system, the key loads can obtain power from seven sources. The direct current bus power control unit （DC ...The redundancy technology for the aircraft multi-channel DC electrical power supply system is studied. In this system, the key loads can obtain power from seven sources. The direct current bus power control unit （DC BPCU） is put forward to manage the power supply system automatically. The redundancy innovation is also applied in both hardware and software of DC BPCU. Furthermore, redundancy fault diagnosis is discussed through the existing parts. Experiments and applications show that the proposed aircraft DC power supply system possesses many advantages of high reliability, high automation and so on.展开更多
Mixed-weight least-squares (MWLS) predictive control algorithm, compared with quadratic programming (QP) method, has the advantages of reducing the computer burden, quick calculation speed and dealing with the case in...Mixed-weight least-squares (MWLS) predictive control algorithm, compared with quadratic programming (QP) method, has the advantages of reducing the computer burden, quick calculation speed and dealing with the case in which the optimization is infeasible. But it can only deal with soft constraints. In order to deal with hard constraints and guarantee feasibility, an improved algorithm is proposed by recalculating the setpoint according to the hard constraints before calculating the manipulated variable and MWLS algorithm is used to satisfy the requirement of soft constraints for the system with the input constraints and output constraints. The algorithm can not only guarantee stability of the system and zero steady state error, but also satisfy the hard constraints of input and output variables. The simulation results show the improved algorithm is feasible and effective.展开更多
Most of the bauxite resources in China are kaolinite-diaspore bauxite of middle to low grade, with a fine dissemination, and are difficultly separated. Direct flotation de-silication has been shown to be an effec- tiv...Most of the bauxite resources in China are kaolinite-diaspore bauxite of middle to low grade, with a fine dissemination, and are difficultly separated. Direct flotation de-silication has been shown to be an effec- tive method for de-silication of diaspore. In this study the effect of different factors, including pulp tem- perature, density, pH value, depressant, and collector dosage, on direct flotation of diaspore were investigated by laboratory experiments. The optimum conditions were identified and the flotation perfor- mance was improved. The results show that under optimum conditions （a pulp temperature around 40℃, a pulp density from 30% to 33g, a pH value from 9.0 to 10.0, an air flow rate of 0.5 m3/（m2 rain）, a dispersant level from 35 to 70 g/t, and a collector level around 1000 g/t） an AI/Si ratio of 6.97 is obtained starting from an initial Al/Si ratio of about 4.71. The recovery of A1203 under these conditions was 86.94%.展开更多
The evolution of microstructure on aging of an （α＋β） titanium alloy （Ti-5A1-5Mo-5V-1Cr-1Fe） in the β and （α＋β） solution-treated and quenched conditions was investigated, The presence of very fine to phase...The evolution of microstructure on aging of an （α＋β） titanium alloy （Ti-5A1-5Mo-5V-1Cr-1Fe） in the β and （α＋β） solution-treated and quenched conditions was investigated, The presence of very fine to phase was detected by electron diffraction for samples aged below 400 ℃. The fine a aggregates are uniformly formed within fl grains by nucleating at the to particles or β/ω interfaces. At higher temperature, the formation of to phase is avoided and the a lamellae are precipitated at the preferred site of grain boundary and then within the matrix. The highest hardness values are found when the alloys are aged at 450 ℃ for fl condition and 350 ℃ for （α＋β） condition.展开更多
文摘The redundancy technology for the aircraft multi-channel DC electrical power supply system is studied. In this system, the key loads can obtain power from seven sources. The direct current bus power control unit （DC BPCU） is put forward to manage the power supply system automatically. The redundancy innovation is also applied in both hardware and software of DC BPCU. Furthermore, redundancy fault diagnosis is discussed through the existing parts. Experiments and applications show that the proposed aircraft DC power supply system possesses many advantages of high reliability, high automation and so on.
基金National Key Basic Research and Development(No.2002CB312200)
文摘Mixed-weight least-squares (MWLS) predictive control algorithm, compared with quadratic programming (QP) method, has the advantages of reducing the computer burden, quick calculation speed and dealing with the case in which the optimization is infeasible. But it can only deal with soft constraints. In order to deal with hard constraints and guarantee feasibility, an improved algorithm is proposed by recalculating the setpoint according to the hard constraints before calculating the manipulated variable and MWLS algorithm is used to satisfy the requirement of soft constraints for the system with the input constraints and output constraints. The algorithm can not only guarantee stability of the system and zero steady state error, but also satisfy the hard constraints of input and output variables. The simulation results show the improved algorithm is feasible and effective.
基金financial support from the National Key Technology R&D Program in the 11th Five Year Plan of China (No. 2008BAB31B02)the National Natural Science Foundation of China (No. 51174205)
文摘Most of the bauxite resources in China are kaolinite-diaspore bauxite of middle to low grade, with a fine dissemination, and are difficultly separated. Direct flotation de-silication has been shown to be an effec- tive method for de-silication of diaspore. In this study the effect of different factors, including pulp tem- perature, density, pH value, depressant, and collector dosage, on direct flotation of diaspore were investigated by laboratory experiments. The optimum conditions were identified and the flotation perfor- mance was improved. The results show that under optimum conditions （a pulp temperature around 40℃, a pulp density from 30% to 33g, a pH value from 9.0 to 10.0, an air flow rate of 0.5 m3/（m2 rain）, a dispersant level from 35 to 70 g/t, and a collector level around 1000 g/t） an AI/Si ratio of 6.97 is obtained starting from an initial Al/Si ratio of about 4.71. The recovery of A1203 under these conditions was 86.94%.
基金Project (50634030) supported by the National Natural Science Foundation of ChinaProject (2007DS04014) supported by the Program of Science and Technology of Shandong Province,ChinaProject supported by the Open Research Fund from the State Key Laboratory of Rolling and Automation,Northeastern University, China
文摘The evolution of microstructure on aging of an （α＋β） titanium alloy （Ti-5A1-5Mo-5V-1Cr-1Fe） in the β and （α＋β） solution-treated and quenched conditions was investigated, The presence of very fine to phase was detected by electron diffraction for samples aged below 400 ℃. The fine a aggregates are uniformly formed within fl grains by nucleating at the to particles or β/ω interfaces. At higher temperature, the formation of to phase is avoided and the a lamellae are precipitated at the preferred site of grain boundary and then within the matrix. The highest hardness values are found when the alloys are aged at 450 ℃ for fl condition and 350 ℃ for （α＋β） condition.
