文坛的“磁化”现象

楚山孤在《作家四戒》(《文学报》1994年8月25日)一文中指出:在人际关系方面,作家应该戒“磁”.这个“磁”字可能是北京方言.表面上看起来是亲近,实际上却是粘糊,有点拉拉扯扯,说不清楚.文学有流派,作家有群体.这是在创作实践中自然形成的,尽可发展;而“磁”则不是以文学为基础。

浅析如何让体育教学对小学生产生“磁化”效应

近些年来,笔者对最近几个年级的小学生进行了课上调查,调查的内容主要是,大家是否喜欢上体育课,结果惊人地发现,本应该受到小学生喜爱的体育课,竟然也属于他们"厌学"的课程之一。针对这一问题现状,本文主要探讨如何让体育课吸引学生,对小学生产生"磁化"效应,从而提高小学体育课堂教学的实效性。

Effect of temperature on suspension magnetization roasting of hematite using biomass waste as reductant:A perspective of gas evolution

The magnetization reduction of hematite using biomass waste can effectively utilize waste and reduce CO_(2) emission to achieve the goals of carbon peaking and carbon neutrality.The effects of temperatures on suspension magnetization roasting of hematite using biomass waste for evolved gases have been investigated using TG-FTIR,Py-GC/MS and gas composition analyzer.The mixture reduction process is divided into four stages.In the temperature range of 200-450℃ for mixture,the release of CO_(2),acids,and ketones is dominated in gases products.The yield and concentration of small molecules reducing gases increase when the temperature increases from 450 to 900℃.At 700℃,the volume concentrations of CO,H_(2) and CH_(4) peak at 8.91%,8.90% and 4.91%,respectively.During the suspension magnetization roasting process,an optimal iron concentrate with an iron grade of 70.86%,a recovery of 98.66% and a magnetic conversion of 45.70% is obtained at 700℃.Therefore,the magnetization reduction could react greatly in the temperature range of 600 to 700℃ owing to the suitable reducing gases.This study shows a detail gaseous evolution of roasting temperature and provides a new insight for studying the reduction process of hematite using biomass waste.

从“非典”词群的遴选看词语定型的理据

随着“非典”阴霾的渐渐飘散,我们已经可以回头审视“非典”词群:它们同中有异,各有特色,出现频率不同,使用场合不同,现已形成了“非典”“非典型肺炎”“SARS”三足鼎立的局面。本文通过对“非典”词群三年的跟踪观察和社会调查,对“非典”词群及其相关问题进行了探讨,同时就新词的命名谈了我们的看法。

Evading strength−ductility trade-off of GH605 alloy using magnetic field-assisted undercooling treatment

Undercooling solidification under a magnetic field(UMF)is an effective way to tailor the microstructure and properties of Co-based alloys.In this study,by attributing to the UMF treatment,the strength−ductility trade-off dilemma in GH605 superalloy is successfully overcome.The UMF treatment can effectively refine the grains and increase the solid solubility,leading to the high yield strength.The main deformation mechanism in the as-forged alloy is dislocation slipping.By contrast,multiple deformation mechanisms,including stacking faults,twining,dislocation slipping,and their strong interactions are activated in the UMF-treated sample during compression deformation,which enhances the strength and ductility simultaneously.In addition,the precipitation of hard Laves phases along the grain boundaries can be obtained after UMF treatment,hindering crack propagation during compression deformation.

Preparation and electromagnetic shielding properties of PET/rGO/SWCNT composite fabric

Graphene oxide(GO)with excellent dispersion ability can assist the dispersion of single-walled carbon nanotube(SWCNT)and promote the formation of uniform and stable GO/SWCNT coating liquid.The highly conductive polyethylene terephthalate/reduced graphene oxide/SWCNT(PET/rGO/SWCNT)electromagnetic shielding composite fabric was successfully prepared by anchoring rGO/SWCNT on PET fabric via dip-coating piror to low-temperature thermal reduction.The results showed that the carboxyl groups and hydroxyl groups formed of hydrophilic-treated PET were conducive to the formation of hydrogen bonds with that of GO,which enhanced the interaction between PET fabric and GO/SWCNT coating;the loading of GO/SWCNT increased with the number of dip-coating,the unit area loading of rGO/SWCNT in the final composite fabric was 2.7 mg/cm^(2) after 10 dip-coating cycles and thermal reduction;the PET/rGO/SWCNT composite fabric had a continuous and dense conductive network,with a conductivity of up to 41.6 S/m and the average electromagnetic interference shielding effectiveness in X-band was 22 dB;the flexible PET/rGO/SWCNT composite fabric was not only easy to process,but also exhibited excellent conductivity and shielding efficiency,showing great potential in the application of electromagnetic shielding fabrics.

Local existence and uniqueness of solutions to the evolutionary model for magnetoviscoelasticity

In this paper,we prove the local existence and uniqueness of solutions to the evolutionary model for magnetoviscoelasticity in R^(2),R^(3).This model consists of an incompressible Navier-Stokes,a regularized system for the evolution of the deformation gradient and the Landau-Lifshitz-Gilbert system for the dynamics of the mag-netization.Our approach depends on approximating the system with a sequence of perturbed systems.

Research progress of permanent ferrite magnet materials

Permanent ferrite magnet materials are extensively employed due to their exceptional magnetic properties and cost-effectiveness.The fast development in electromobile and household appliance industries contributes to a new progress in permanent ferrite materials.This paper reviews the deveolpement and progress of permanent ferrite magnet industry in recent years.The emergence of new raw material,the advancement of perparation methods and manufacturing techniques,and the potential applications of permanent ferrite materials are introduced and discussed.Specifically,nanocrystallization plays a crucial role in achieving high performance at a low cost and reducing reliance on rare earth resources,and therefore it could be a promising development trendency.

“四化”教学模式初探

“四化”教学模式初探李景华在大变化、大动荡、大洗礼的新的历史发展时期，思想政治课教学面临着前所未有的新矛盾。突出的矛盾是教学实效与教者的初衷相背离，学生对思想政治课往往“学而不信，知而不行”。我认为，造成思想政治课教学低效的原因，除了社会大气候的影响...

磁流体在矿井提升机滑动轴承铁谱监测中的应用

在利用铁谱技术对提升机滑动轴承运行状态进行故障监测时 ,非铁磁性颗粒的沉积是个问题 ,通过对某矿井提升机故障监测的实例来阐述磁流体在解决这一问题中的重要应用 ,提出磁流体的“磁化”作用 ,并指出磁流体“磁化”非铁磁性颗粒时具有选择性 .

Dynamic experiments on flocculation and sedimentation of argillized ultrafine tailings using fly-ash-based magnetic coagulant

In order to accelerate the sedimentation of super-large-scale argillized ultrafine tailings with bad features such as low settling velocity, muddy overflow water, and large flocculant dosage, a fly-ash-based magnetic coagulant （FAMC） was used in a dynamic experimental device. To obtain the best possible combination of the impact factors （magnetic intensity, FAMC dosage, flocculant dosage, and feed speed） for minimum overflow turbidity, a response surface methodology test coupled with a four-factor five-level central composite design was conducted. The synergy mechanism of FAMC and flocculant was analyzed based on the potential measurement and scanning electron microscopy. The results show that the flocculant dosage, overflow turbidity, and solid content can be reduced by 50%, 90%, and 80%, while the handling capacity per unit and efficiency of backfill and dry stacking can be promoted by 20%, 17%, and 13%, respectively, with a magnetic intensity of 0.3 T, FAMC dosage of 200 mL/t, flocculant dosage of 30 g/t, and feed speed of 0.6 t/（m^2·h）. Therefore, synergy of FAMC and flocculant has obvious efficiency in saving energy and protecting the environment by allowing 70×10^6 t/a of argillized ultrafine tailings slurry to be disposed safely and efficiently with a cost saving of more than 53×106 Yuan/a, which gives it great promise for use in domestic and foreign mines.

Surface Loess Susceptibility Anomalies Directly Indicating Oil and Gas Reservoirs

It is a fact that the near surface loess has magnetic susceptibility anomalies in oil and gas areas. Why these anomalies occur and whether they have any significant value for the exploration of oil and gas reservoirs are questions that geophysicists are mostly concerned about and study. We analyze the cause of the formation of surface loess susceptibility anomalies in oil and gas areas, process the observations of the susceptibility of loess samples taken from an oil and gas area in western China with proper mathematical methods, and determine the background value of loess susceptibility. These results are used to determine oil and gas prospect areas with a numeric evaluation factor based on the susceptibility anomalies. Actual oil wells have verified that using the susceptibility anomalies to indicate the location of oil and gas reservoirs is valid.

Fe_(75)Zr_3Si_(13)B_9 magnetic materials prepared by spark plasma sintering

Fe75Zr3Si13B9 magnetic amorphous powders were fabricated by mechanical alloying. Bulk amorphous and nanocrystalline alloys with 20 mm in diameter and 7 mm in height were fabricated by the spark plasma sintering technology at different sintering temperatures. The phase composition, glass transition temperature （Tg）, onset crystallization temperature （Tx）, peak temperature （Tp） and super-cooled liquid region （ΔTx） of Fe75Zr3Si13B9 amorphous powders were analyzed by X-ray diffraction （XRD） and differential scanning calorimetry （DSC）. The phase transition, microstructure, mechanical properties and magnetic performance of the bulk alloys were discussed with X-ray diffractometer, scanning electron microscope （SEM）, Gleeble 3500 and vibration sample magnetometer （VSM）, respectively. It is found that with the increase in the sintering temperature at the pressure of 500 MPa, the density, compressive strength, micro-hardness and saturation magnetization of the sintering samples improved significantly, the amorphous phase began to crystallize gradually. Finally, the desirable amorphous and nanocrystalline magnetic materials at the sintering temperature of 863.15 K and the pressure of 500 MPa have a density of 6.9325 g/cm3, a compressive strength of 1140.28 MPa and a saturation magnetization of 1.28 T.

Corrosion behavior of T2 copper in 3.5% sodium chloride solution treated by rotating electromagnetic field

Copper is susceptible to producing corrosion problems in corrosive environments, which leads to serious safety problems. Thus, investigating the corrosion behavior of copper is of great significance. The effects of rotating electromagnetic field on corrosion behavior of T2 copper in 3.5% sodium chloride solution with electrochemical measurements were investigated. The results showed that rotating electromagnetic field changed properties of 3.5% sodium chloride solution by increasing the values of temperature and pH and decreasing the values of conductivity and dissolved oxygen. The rotating electromagnetic field improved the corrosion resistance of T2 copper. The corrosion products of T2 copper in treated 3.5% sodium chloride solution were composed of Cu20 and CuCl. The low corrosion rate of T2 copper was resulted from the decrease of dissolved oxygen in 3.5% sodium chloride solution treated by rotating electromagnetic field.

Changes in magnetic susceptibility and grain size of Holocene sediments of the Pearl River estuary and climate changes reflected by them

Through the Pearl River Estuary Wan Qing-sha W2 core AMS 14^C dating of sediments, combining with paleomagnetic test, pollen analysis, and comprehensive comparison with other relevant records, the regional framework of Holocene age was established. Using the combined feature grain size and magnetic susceptibility proxies for the environment, climate change information in the area since about 6 000 cal yr BP was obtained. The result showed the area since the middle Holocene had experienced three stages climate changes of warm and dry - cool and wet temperature and humidity South area of China in the late Holocene climate （especially rainfall） had important changes, corresponding to the Northern Hemisphere solar radiation reducing, air temperature decreasing, Asian monsoon weakening, and it had close ties with activities to strengthen El Nino - Southern Oscillation events.

Effects of Magnetized Water on Seed Germination of Welsh Onion (Allium fistulosum L.)

With Welsh Onion seeds employed as materials, effects of magnetized water on seed Germination were studied. The results showed the treatment of magnetized water soaking for 4 h promoted water absorption rate and amylase ac- tivities of seeds significantly, which accelerated the transformation process of en- dosperm starch to soluble sugar, resulting in emergence of 36 hours in advance under low temperature condition. Germination rate and germination potential of magnetized water soaking were higher than the contrast by 6.7% and 10.0%, which helped cultivate vigorous seedling.

Adsorption behavior and adsorption mechanism of Cu(Ⅱ) ions on amino-functionalized magnetic nanoparticles

Amino-functionalized magnetic nanoparticle （NH2-MNP） were prepared by a sol-gel approach. The adsorption behavior of Cu（II） ions on NH2-MNP was discussed systematically by batch experiments. The effects of initial Cu（II） ions concentration, time, pH and temperature were investigated. In kinetic studies, the pseudo-second-order model was successfully employed, and the pseudo-first-order model substantiated that Cu（II） adsorption on NH2-MNP was a diffusion-based process. Langmuir model and Dubinin-Radushkevich model （R2〉0.99） were more corresponded with the adsorption isotherm data of Cu（II） ions than Freundlich model. The adsorption capacity was increased with the increment of temperature and pH. NH2-MNP remains excellent Cu（II） recoveries after reusing five adsorption and desorption cycles, making NH2-MNP a promising candidate for repetitively removing heavy metal ions from environmental water samples. According to the results obtained from adsorption activation energy and thermodynamic studies, it can be inferred that the main adsorption mechanism between absorbent and Cu（II） ions is ion exchange-surface complexation.

Magnetocaloric effect in Ni-Mn-In-Co microwires prepared by Taylor-Ulitovsky method

Ni-Mn-In-Co microwires with diameter of 30-100 μm are prepared by glass-coated metal filaments（Taylor–Ulitovsky） method. The effects of magnetic field on martensite transformation temperature in the as-prepared and annealed microwires are investigated using a physical property measurement system（PPMS）. Magnetocaloric effect（MCE） attributed to field-induced austenite transformation in the as-prepared and annealed microwires is analyzed indirectly from the isothermal magnetization（M-B） curves. The as-prepared microwire has a 7-layer modulated martensite structure（7M） at room temperature. The changes of austenite starting temperature induced by an external magnetic field（ΔAs/ΔB） in the as-prepared and annealed microwires are-1.6 and-4 K/T, respectively. Inverse martensite to austenite transformation exists in annealed microwires when an external magnetic field is applied at temperatures near As. The entropy change（ΔS） obtained in the annealed microwires is 3.0 J/（kg·K）, which is much larger than that in the as-prepared microwires 0.5 J/（kg·K）. The large entropy change and low price make Ni-Mn-In-Co microwires a potential working material in magnetic refrigeration.

Influence of the Electric Field on the Properties of the Bound Magnetopolaron in GaAs Semiconductor Quantum Wells

The influence of the electric field on the properties of the bound magnetopolaron in an infinite-depth GaAs semiconductor quantum well is investigated using the linear-combination operator and the unitary transformation method. The relationships between the polaron＇s ground state energy and the Coulomb bound potential, electric field, magnetic field, and well-width are derived and discussed. Our numerical results show that the absolute value of the polaron＇s ground state energy increases as the electric field and the Coulomb bound potential increase, and decreases as the well-width and the magnetic field strength increase. When the well-width is small,the quantum size effect is significant.

Recovery of iron from waste ferrous sulphate by co-precipitation and magnetic separation

Magnetite concentrate was recovered from ferrous sulphate by co-precipitation and magnetic separation. In co-precipitation process, the effects of reaction conditions on iron recovery were studied, and the optimal reaction parameters are proposed as follows： n（CaO）/n（Fe2＋） 1.4：1, reaction temperature 80 ℃, ferrous ion concentration 0.4 mol/L, and the final mole ratio of Fe3＋ to FJ＋ in the reaction solution 1.9-2.1. In magnetic separation process, the effects of milling time and magnetic induction intensity on iron recovery were investigated. Wet milling played an important part in breaking the encapsulated magnetic phases. The results showed that the mixed product was wet-milled for 20 min before magnetic separation, the grade and recovery rate of iron in magnetite concentrate were increased from 51.41% and 84.15% to 62.05% and 85.35%, respectively.