An efficient cycle slip detection method is proposed for high precision positioning and navigation results with global positioning system (GPS),which is based on the assumption of a high sampling interval, measureme...An efficient cycle slip detection method is proposed for high precision positioning and navigation results with global positioning system (GPS),which is based on the assumption of a high sampling interval, measurement errors are so small that they can be ignored in the temporal single difference observables. And ambiguities are ordinarily equal to zero,but could be the number of cycles that have "slipped" if loss-of-lock has occurred.Therefore,cycle slips are estimated as parameters of time-relative positioning observation equations.Because the temporal single difference observables are taken at different epochs and different stations with a single GPS receiver,if time-relative positioning observation equations are linearized as that of conventional relative positioning,the design matrix will be rank defective.To obtain a stable linearization scheme,time-relative positioning observation equations are further analyzed,and the concept of virtual measurement is applied.A sample of data collected on a vehicle test shows that a cycle slip detection approach based on time-relative positioning theory can detect slips at the value of one cycle.The results also indicate if two satellites are so near to each other that they have the same equivalent to satellite-receiver geometry,cycle slip detection will be difficult and may get wrong results.Cycle slips of different satellites also affect detection by satellite-receiver geometry.展开更多
In order to better understand the general tidal features in the venturi-shaped area between Zhenhai and Shenjiamen in the northern coastal region of Zhejiang Province in the East China Sea, the tidal data were obtaine...In order to better understand the general tidal features in the venturi-shaped area between Zhenhai and Shenjiamen in the northern coastal region of Zhejiang Province in the East China Sea, the tidal data were obtained from both the three permanent tide stations of Zhenhai, Dinghai and Shenjiamen, and four temporary tide stations of Mamu, Chuanshan, Guoju and Liuheng, along with the current speed being observed at Luotou Waterway. Results from harmonic analysis show that: (1) The area was dominated by shallow water tides with irregular semi-diurnal features, and the smallest tidal range occurred in the area near a crossing line between Zhenhai and Dinghai stations, indicating that a tidal node existed in the southern Hangzhou Bay; (2) Formulae, HS2/HM2 >0.4 and gM2-(gK1+gO1)=270° (where H and g are harmonic constants), could be used as judging criteria for high and low tidal level diurnal inequalities; (3) The duration difference between ebb and flood tides could be roughly assessed by the ratio of HM4 vs. HM2; and the larger the ratio is, the bigger the duration difference is. At the same time, the duration period could be assessed by 2gM2-gM4, the epoch difference between M2 and M4 tidal constituents. If 2gM2-gM4 <180°, then the ebb duration is longer than the flood duration; if 180°< 2gM2-gM4 <360°, the result is reversed; (4) Taking Dinghai station as a center point, the highest tidal levels and the average high tidal levels, as well as the average tidal ranges at all stations became higher and larger both southeastwards and northwestwards, while the lowest tidal levels and the average low tidal levels appeared to be lower both southeastwards and northwestwards; and (5) The tidal patterns were not all in line with the tidal current patterns. As a conclusion, the smallest tidal range occurred in the narrow part of the venturi-shaped area. Along the both sides of the area, the highest tidal level and tidal range became higher and larger, while the lowest tidal level became lower with the increase of the distance from the narrow throat area. This is somehow different from the theory that the tidal level increases gradually when it moves towards the top narrow area of a V-shaped bay or estuary.展开更多
Metro passenger flow control problem is studied under given total inbound demand in this work,which considers passenger demand control and train capacity supply.Relevant connotations are analyzed and a mathematical mo...Metro passenger flow control problem is studied under given total inbound demand in this work,which considers passenger demand control and train capacity supply.Relevant connotations are analyzed and a mathematical model is developed.The decision variables are boarding limiting and stop-skipping strategies and the objective is the maximal passenger profit.And a passenger original station choice model based on utility theory is built to modify the inbound passenger distribution among stations.Algorithm of metro passenger flow control scheme is designed,where two key technologies of stopping-station choice and headway adjustment are given and boarding limiting and train stopping-station scheme are optimized.Finally,a real case of Beijing metro is taken for example to verify validity.The results show that in the three scenarios with different ratios of normal trains to stop-skipping trains,the total limited passenger volume is the smallest and the systematic profit is the largest in scenario 3.展开更多
Industrial sites are selected in many of the developing countries without taking into consideration some pertinent criteria that are directly affecting the sustainability of such industries in the locations after comm...Industrial sites are selected in many of the developing countries without taking into consideration some pertinent criteria that are directly affecting the sustainability of such industries in the locations after commissioning. Industries are located in some areas based on political influence rather than facility availability that support industry's productivity. In this study a criteria model was developed for assessing the present industrial site locations based on predetermined influencing factors called criteria. In the model provision was made for the sorting out of deficient influencing factors for the purpose of upgrading them to the minimum level required called benchmark through periodical allocation of appropriate funds. In validating the model, identified industrial sites located in selected States of Nigeria were surveyed. Data were collected on factors such as power supply, marketability and raw malerial availability which were considered influential to the sustainability of industry's site in the respective areas. Data were analysed for the criteria identified along the line of industrial categories which included large-, medium-, and small-scales. Benchmarks, as well as levels of criteria in the respective regions were determined using statistical weighted averages and the results were used as input to the model. The output results of the model showed that none of the industrial sites located in the selected six States of the South-Western Nigeria were productivity supportive. However, a good performance was achieved in a site with a budget of S13 million (US Dollars) for the upgrading of the deficient facilities in the next three years.展开更多
Small WWTP (wastewater treatment plants) are frequently located, by necessity, in remote and isolated sites, which increases the difficulty of its energy supply. This paper describes a case study which is a step by ...Small WWTP (wastewater treatment plants) are frequently located, by necessity, in remote and isolated sites, which increases the difficulty of its energy supply. This paper describes a case study which is a step by step procedure concerning the evaluation of the wind potential of sites that are dependent of in-situ energy generation, as well as, on the utilization of the potential wind energy in Magoito WWTP. The adopted methodology comprised the collection of one year of in-situ wind data and its validation by comparison with historical data of more than 10 years of a nearby anemometric station. The data provided by the two anemometric stations was statistically treated and allowed the analysis of the results from the two stations. These results are promising in terms of wind availability and velocity. Finally, the study comprised the simulation of the local wind conditions for a considerable larger area in order to find the best site for locating a wind turbine.展开更多
A weather station is proposed especially designed for developing countries, and to meet the standards of the international scientific community making research on the earth system. The station would measure in situ se...A weather station is proposed especially designed for developing countries, and to meet the standards of the international scientific community making research on the earth system. The station would measure in situ several ECV (essential climate variables). These data may enable an agricultural breakthrough in countries lacking meteorological infrastructure, help in climate change monitoring, and facilitate diffusion of wind energy. A pre-feasibility analysis is presented. It appears interesting that the station is supplied by a social enterprise. A research to establish the best shelter design using computational fluid dynamics is also reported. The criterion is the accuracy with which the surface air temperature is reproduced inside the shelter. A design following recommendations by the WMO (World Meteorological Organization), a smaller design with identical geometry, and two alternative small designs are analyzed. All four designs are simulated in PVC, natural rubber and wood, with and without white paint coating. The smaller shelters perform better. The influence of the material, dimensions and design is smaller than that of the white paint. Shelters made of PVC or rubber, and/or in alternative designs, may be more interesting if other criteria are considered, like whether logistics, manufacturing, etc. are more sustainable, easier and/or cheaper.展开更多
We propose the design of an observation station to establish a reliable datum for displacement and deformation analysis at the first working-face subsidence observation station of Liuzhuang Mine. The design considers ...We propose the design of an observation station to establish a reliable datum for displacement and deformation analysis at the first working-face subsidence observation station of Liuzhuang Mine. The design considers various geologic and mining con-ditions. Having analyzed the aims of the joint survey and the comprehensive survey, we propose design principles, and work modes, for adopting GPS technology as the position measuring technique to be used in these two stages. Baseline vectors and spatial ad-justments of the GPS network were calculated after study of data processing and quality estimation methods. A coordinate system transformation and error estimates of the transformed GPS network data are discussed. The error estimates in all stages show that the GPS control network of the observation station has sufficient accuracy and is highly efficient. The network thus provides a reli-able datum for analyzing the laws of surface displacement and deformation induced by mining.展开更多
As a well known DNA photolesion product, the special UV induced pyrimidine dimmer called spore photoproduct (SP), has aroused strong research interests. The SP formation was reported solely between two adjacent thym...As a well known DNA photolesion product, the special UV induced pyrimidine dimmer called spore photoproduct (SP), has aroused strong research interests. The SP formation was reported solely between two adjacent thymidine residues. It remains unclear in pervious experimental observations why there is an absence of the cytosine-derived SP-like photoprod- uct formation at the cytosine containing DNA strand, although the cytosine residue holds great similarity to thymine in terms of molecular structure. From a theoretical perspec- tive, we have explored this issue in this work by means of density functional theory at the B3LYP/6-311++G(d,p) //B3LYP/6-31G(d,p) level for the DNA dinucleotide fragment, cy- tosine phosphate thymine (CpT). Key factors blocking the formation of the SP-like product between two adjacent cytosine and thymidine residues are revealed. Instead of undergoing photochemical SP reaction, a photophysical deactivation pathway back to the ground state turns out to be favorable for the CpT dinucleotide fragment.展开更多
Five mobile digital seismic stations were set up by the Earthquake Administration of Yunnan Province near the epicenter of the main shock after the Ning'er M6. 4 earthquake on June 3, 2007. In this paper, the aftersh...Five mobile digital seismic stations were set up by the Earthquake Administration of Yunnan Province near the epicenter of the main shock after the Ning'er M6. 4 earthquake on June 3, 2007. In this paper, the aftershock sequence of the Ning'er M6. 4 earthquake is relocated by using the double difference earthquake location method. The data is from the 5 mobile digital seismic stations and the permanent Simao seismic station. The results show that the length of the aftershock sequence is 40kin and the width is 30km, concentrated obviously at the lateral displacement area between the Pu'er fault and the NNE-trending faults, with the majority occurring on the Pu'er fault around the main shock. The depths of aftershocks are from 2kin to 12km, and the predominant distribution is in the depth of 8 ~ 10km. The mean depth is 7. 9kin. The seismic fault dips to the northwest revealed from the profile parallel to this aftershock sequence, which is identical to the dip of the secondary fault of the NE-trending Menglian-Mojiang fault in the earthquake area. There are more earthquakes concentrated in the northwest segment than in the southeast segment, which is perhaps related to the underground medium and faults. The depth profile of the earthquake sequence shows that the relocated earthquakes are mainly located near the Pu'er fault and the seismic faults dip to the southwest, consistent with the dip of the west branch of the Pu'er fault. In all, the fault strike revealed by earthquake relocations matches well with the strike in the focal mechanism solutions. The main shock is in the top of the aftershock sequence and the aftershocks are symmetrically distributed, showing that faulting was complete in both the NE and SW directions.展开更多
Several new demands have been put forward for the application of the Beijing continuous GNSS observations due to some particular reasons, such as the limited coverage of the observation network, the different construc...Several new demands have been put forward for the application of the Beijing continuous GNSS observations due to some particular reasons, such as the limited coverage of the observation network, the different construction and management criterion executed by different units and the intense interference resulting from human activity. In this paper, necessary processing of data is carried out, including more accurate calculation, corrections to the replacement, outliers and relocation of equipment, and elimination of linear trends in the E-component for every station. The E-components of the 16 available stations showed a lower sawtooth wave anomaly (slowly westward propagating) before the 2011 Tohoku Mw9. 0 earthquake, a coseismic step rebound (rapid eastward propagating) and a post-seismic D-shaped recovery. These steps constituted a complete earthquake process which was rarely seen before in the GNSS observations and provides a good example for further study. Moreover, the rapid eastward propagating during the earthquake is not influenced by the size of the given normal values, which may play a significant role in earthquake forecasting and early warning.展开更多
Abnormal disturbances, s uch as sharp pulses, w ere observed by vertical pendulum tiltmeters in Wudu, Hanzhong and Ningshaan seismic stations on August 6, 2008.According to the time and spatial location of the anomali...Abnormal disturbances, s uch as sharp pulses, w ere observed by vertical pendulum tiltmeters in Wudu, Hanzhong and Ningshaan seismic stations on August 6, 2008.According to the time and spatial location of the anomalies,we build a"source precursor"propagator to calculate possible focal region by aid of quasi-Newton least squares and grid search methods. The calculated focal region is located at the aftershock area of the Wenchuan earthquake on the northern section of Longmenshan fault zone,which may be related to the 54km-away M S5. 0 Pingwu-Beichuan earthquake,with starting time of about thirty three hours before the earthquake.展开更多
The mining area deformation monitoring theory and method using precise point positioning (PPP) ambi- guity resolution (AR) were studied, and an ambiguity fixing model with satellite and receiver combina- tion phas...The mining area deformation monitoring theory and method using precise point positioning (PPP) ambi- guity resolution (AR) were studied, and an ambiguity fixing model with satellite and receiver combina- tion phase delay (CPD) was proposed for zero-differenced PPP ambiguity fixing and its corresponding formula derivation was given. The data processing results for I h at six IGS stations in China show that 93% of ambiguities can be fixed within 10 min and all ambiguities can be fixed within 15 min. After ambi- guity fixing, the positioning accuracy is improved by more than 85% in the E and N directions, with abso- lute positioning accuracy reaching millimeter level, and it was improved by 70% in the U direction, reaching centimeter level; the proposed zero-differenced ambiguity fixing model can effectively improve the convergence rate and positioning accuracy in PPP. Data monitoring continuously conducted for half a year at four COPS stations of Shanxi China Coal Pingshuo Group validated the feasibility of using PPP in mining area deformation monitoring.展开更多
Objective:Nephron-sparing surgery(NSS) for small renal masses offers a similar functional and oncological outcome to that of radical surgery.Laparoendoscopic single-site surgery(LESS) emerges as an advanced alternativ...Objective:Nephron-sparing surgery(NSS) for small renal masses offers a similar functional and oncological outcome to that of radical surgery.Laparoendoscopic single-site surgery(LESS) emerges as an advanced alternative for reduced invasiveness and improves cosmesis;LESS is developing quickly and its indications have been expanded,but still in its infancy.The aim of this paper is to report our preliminary experience in transumbilical LESS partial nephrectomy(LESS-PN),so as to assess its utility, safety and efficacy.Methods:From August 2009 to October 2010,3 patients underwent transumbilical LESS-PN via a novel multi-channel TriPort by a single experienced urologist in our institution.Patient demographics,perioperative and follow-up data were prospectively collected and analyzed.Results:All the three procedures were successfully completed.A 5-mm ancillary trocar was utilized in all 3 cases.The mean operative duration was 226.3(210-254 min) with an estimated blood loss of 56.7 ml (20-100 ml).Mean warm ischemia time was 35.7 min(19-48 min).One patient was transfused due to postoperative bleeding. The recovery was uneventful and mean length of postoperative stay was 13 days(12-14 days).At the latest follow-up,all patients remained symptom-free and had normal renal function without evidence of recurrence,and they were delighted for a hidden transumbilical scar.Conclusion:Transumbilical LESS-PN is a feasible and safe procedure albeit extremely technically challenging.Surgical outcomes at a median follow-up of 2 years are promising,while currently it should be reserved for highly selected patients with favorable tumor anatomy and performed by a very experienced laparoscopic surgeon.展开更多
文摘An efficient cycle slip detection method is proposed for high precision positioning and navigation results with global positioning system (GPS),which is based on the assumption of a high sampling interval, measurement errors are so small that they can be ignored in the temporal single difference observables. And ambiguities are ordinarily equal to zero,but could be the number of cycles that have "slipped" if loss-of-lock has occurred.Therefore,cycle slips are estimated as parameters of time-relative positioning observation equations.Because the temporal single difference observables are taken at different epochs and different stations with a single GPS receiver,if time-relative positioning observation equations are linearized as that of conventional relative positioning,the design matrix will be rank defective.To obtain a stable linearization scheme,time-relative positioning observation equations are further analyzed,and the concept of virtual measurement is applied.A sample of data collected on a vehicle test shows that a cycle slip detection approach based on time-relative positioning theory can detect slips at the value of one cycle.The results also indicate if two satellites are so near to each other that they have the same equivalent to satellite-receiver geometry,cycle slip detection will be difficult and may get wrong results.Cycle slips of different satellites also affect detection by satellite-receiver geometry.
基金Supported by Study on the Temporal and Spatial Distributions of Temperature and Salinity in Xiangshan Bay and the Northern Zhejiang Coastal Waters in the East China Sea of the Education Department of Zhejiang Provincial Government of China (Project No. 20061134)Study on Environment Dynamics and Nutrient Circulation in Xiangshan Bay and its Surrounding Areas in the East China Sea of the Second Institute of Oceanography, State Oceanic Administration, China (Project No. SOED0605)
文摘In order to better understand the general tidal features in the venturi-shaped area between Zhenhai and Shenjiamen in the northern coastal region of Zhejiang Province in the East China Sea, the tidal data were obtained from both the three permanent tide stations of Zhenhai, Dinghai and Shenjiamen, and four temporary tide stations of Mamu, Chuanshan, Guoju and Liuheng, along with the current speed being observed at Luotou Waterway. Results from harmonic analysis show that: (1) The area was dominated by shallow water tides with irregular semi-diurnal features, and the smallest tidal range occurred in the area near a crossing line between Zhenhai and Dinghai stations, indicating that a tidal node existed in the southern Hangzhou Bay; (2) Formulae, HS2/HM2 >0.4 and gM2-(gK1+gO1)=270° (where H and g are harmonic constants), could be used as judging criteria for high and low tidal level diurnal inequalities; (3) The duration difference between ebb and flood tides could be roughly assessed by the ratio of HM4 vs. HM2; and the larger the ratio is, the bigger the duration difference is. At the same time, the duration period could be assessed by 2gM2-gM4, the epoch difference between M2 and M4 tidal constituents. If 2gM2-gM4 <180°, then the ebb duration is longer than the flood duration; if 180°< 2gM2-gM4 <360°, the result is reversed; (4) Taking Dinghai station as a center point, the highest tidal levels and the average high tidal levels, as well as the average tidal ranges at all stations became higher and larger both southeastwards and northwestwards, while the lowest tidal levels and the average low tidal levels appeared to be lower both southeastwards and northwestwards; and (5) The tidal patterns were not all in line with the tidal current patterns. As a conclusion, the smallest tidal range occurred in the narrow part of the venturi-shaped area. Along the both sides of the area, the highest tidal level and tidal range became higher and larger, while the lowest tidal level became lower with the increase of the distance from the narrow throat area. This is somehow different from the theory that the tidal level increases gradually when it moves towards the top narrow area of a V-shaped bay or estuary.
基金Projects(RCS2015ZZ002,RCS2014ZT25)supported by State Key Laboratory of Rail Traffic Control&Safety,ChinaProject(2015RC058)supported by Beijing Jiaotong University,China
文摘Metro passenger flow control problem is studied under given total inbound demand in this work,which considers passenger demand control and train capacity supply.Relevant connotations are analyzed and a mathematical model is developed.The decision variables are boarding limiting and stop-skipping strategies and the objective is the maximal passenger profit.And a passenger original station choice model based on utility theory is built to modify the inbound passenger distribution among stations.Algorithm of metro passenger flow control scheme is designed,where two key technologies of stopping-station choice and headway adjustment are given and boarding limiting and train stopping-station scheme are optimized.Finally,a real case of Beijing metro is taken for example to verify validity.The results show that in the three scenarios with different ratios of normal trains to stop-skipping trains,the total limited passenger volume is the smallest and the systematic profit is the largest in scenario 3.
文摘Industrial sites are selected in many of the developing countries without taking into consideration some pertinent criteria that are directly affecting the sustainability of such industries in the locations after commissioning. Industries are located in some areas based on political influence rather than facility availability that support industry's productivity. In this study a criteria model was developed for assessing the present industrial site locations based on predetermined influencing factors called criteria. In the model provision was made for the sorting out of deficient influencing factors for the purpose of upgrading them to the minimum level required called benchmark through periodical allocation of appropriate funds. In validating the model, identified industrial sites located in selected States of Nigeria were surveyed. Data were collected on factors such as power supply, marketability and raw malerial availability which were considered influential to the sustainability of industry's site in the respective areas. Data were analysed for the criteria identified along the line of industrial categories which included large-, medium-, and small-scales. Benchmarks, as well as levels of criteria in the respective regions were determined using statistical weighted averages and the results were used as input to the model. The output results of the model showed that none of the industrial sites located in the selected six States of the South-Western Nigeria were productivity supportive. However, a good performance was achieved in a site with a budget of S13 million (US Dollars) for the upgrading of the deficient facilities in the next three years.
文摘Small WWTP (wastewater treatment plants) are frequently located, by necessity, in remote and isolated sites, which increases the difficulty of its energy supply. This paper describes a case study which is a step by step procedure concerning the evaluation of the wind potential of sites that are dependent of in-situ energy generation, as well as, on the utilization of the potential wind energy in Magoito WWTP. The adopted methodology comprised the collection of one year of in-situ wind data and its validation by comparison with historical data of more than 10 years of a nearby anemometric station. The data provided by the two anemometric stations was statistically treated and allowed the analysis of the results from the two stations. These results are promising in terms of wind availability and velocity. Finally, the study comprised the simulation of the local wind conditions for a considerable larger area in order to find the best site for locating a wind turbine.
文摘A weather station is proposed especially designed for developing countries, and to meet the standards of the international scientific community making research on the earth system. The station would measure in situ several ECV (essential climate variables). These data may enable an agricultural breakthrough in countries lacking meteorological infrastructure, help in climate change monitoring, and facilitate diffusion of wind energy. A pre-feasibility analysis is presented. It appears interesting that the station is supplied by a social enterprise. A research to establish the best shelter design using computational fluid dynamics is also reported. The criterion is the accuracy with which the surface air temperature is reproduced inside the shelter. A design following recommendations by the WMO (World Meteorological Organization), a smaller design with identical geometry, and two alternative small designs are analyzed. All four designs are simulated in PVC, natural rubber and wood, with and without white paint coating. The smaller shelters perform better. The influence of the material, dimensions and design is smaller than that of the white paint. Shelters made of PVC or rubber, and/or in alternative designs, may be more interesting if other criteria are considered, like whether logistics, manufacturing, etc. are more sustainable, easier and/or cheaper.
文摘We propose the design of an observation station to establish a reliable datum for displacement and deformation analysis at the first working-face subsidence observation station of Liuzhuang Mine. The design considers various geologic and mining con-ditions. Having analyzed the aims of the joint survey and the comprehensive survey, we propose design principles, and work modes, for adopting GPS technology as the position measuring technique to be used in these two stages. Baseline vectors and spatial ad-justments of the GPS network were calculated after study of data processing and quality estimation methods. A coordinate system transformation and error estimates of the transformed GPS network data are discussed. The error estimates in all stages show that the GPS control network of the observation station has sufficient accuracy and is highly efficient. The network thus provides a reli-able datum for analyzing the laws of surface displacement and deformation induced by mining.
文摘As a well known DNA photolesion product, the special UV induced pyrimidine dimmer called spore photoproduct (SP), has aroused strong research interests. The SP formation was reported solely between two adjacent thymidine residues. It remains unclear in pervious experimental observations why there is an absence of the cytosine-derived SP-like photoprod- uct formation at the cytosine containing DNA strand, although the cytosine residue holds great similarity to thymine in terms of molecular structure. From a theoretical perspec- tive, we have explored this issue in this work by means of density functional theory at the B3LYP/6-311++G(d,p) //B3LYP/6-31G(d,p) level for the DNA dinucleotide fragment, cy- tosine phosphate thymine (CpT). Key factors blocking the formation of the SP-like product between two adjacent cytosine and thymidine residues are revealed. Instead of undergoing photochemical SP reaction, a photophysical deactivation pathway back to the ground state turns out to be favorable for the CpT dinucleotide fragment.
基金sponsored by the Joint Earthquake Science Foundation,China (200804)
文摘Five mobile digital seismic stations were set up by the Earthquake Administration of Yunnan Province near the epicenter of the main shock after the Ning'er M6. 4 earthquake on June 3, 2007. In this paper, the aftershock sequence of the Ning'er M6. 4 earthquake is relocated by using the double difference earthquake location method. The data is from the 5 mobile digital seismic stations and the permanent Simao seismic station. The results show that the length of the aftershock sequence is 40kin and the width is 30km, concentrated obviously at the lateral displacement area between the Pu'er fault and the NNE-trending faults, with the majority occurring on the Pu'er fault around the main shock. The depths of aftershocks are from 2kin to 12km, and the predominant distribution is in the depth of 8 ~ 10km. The mean depth is 7. 9kin. The seismic fault dips to the northwest revealed from the profile parallel to this aftershock sequence, which is identical to the dip of the secondary fault of the NE-trending Menglian-Mojiang fault in the earthquake area. There are more earthquakes concentrated in the northwest segment than in the southeast segment, which is perhaps related to the underground medium and faults. The depth profile of the earthquake sequence shows that the relocated earthquakes are mainly located near the Pu'er fault and the seismic faults dip to the southwest, consistent with the dip of the west branch of the Pu'er fault. In all, the fault strike revealed by earthquake relocations matches well with the strike in the focal mechanism solutions. The main shock is in the top of the aftershock sequence and the aftershocks are symmetrically distributed, showing that faulting was complete in both the NE and SW directions.
基金funded by Research Foundation for Veteran Experts of China Earthquake Administration(201346)the Natural Science Foundation of Beijing Municipality(8041001,8092012)
文摘Several new demands have been put forward for the application of the Beijing continuous GNSS observations due to some particular reasons, such as the limited coverage of the observation network, the different construction and management criterion executed by different units and the intense interference resulting from human activity. In this paper, necessary processing of data is carried out, including more accurate calculation, corrections to the replacement, outliers and relocation of equipment, and elimination of linear trends in the E-component for every station. The E-components of the 16 available stations showed a lower sawtooth wave anomaly (slowly westward propagating) before the 2011 Tohoku Mw9. 0 earthquake, a coseismic step rebound (rapid eastward propagating) and a post-seismic D-shaped recovery. These steps constituted a complete earthquake process which was rarely seen before in the GNSS observations and provides a good example for further study. Moreover, the rapid eastward propagating during the earthquake is not influenced by the size of the given normal values, which may play a significant role in earthquake forecasting and early warning.
基金funded by the Shaanxi Natural Science Foundation as a Subproject of the Project Entitled "Research on Origin of the Large-amplitude Deformation Anomaly in Hancheng and Qianxian Seismic Stations and the Seismic Hazard of Strong Earthquake in the Guanzhong Region"(2014JM2-4039)
文摘Abnormal disturbances, s uch as sharp pulses, w ere observed by vertical pendulum tiltmeters in Wudu, Hanzhong and Ningshaan seismic stations on August 6, 2008.According to the time and spatial location of the anomalies,we build a"source precursor"propagator to calculate possible focal region by aid of quasi-Newton least squares and grid search methods. The calculated focal region is located at the aftershock area of the Wenchuan earthquake on the northern section of Longmenshan fault zone,which may be related to the 54km-away M S5. 0 Pingwu-Beichuan earthquake,with starting time of about thirty three hours before the earthquake.
基金Financial support from the National Natural Science Foundation of China (No. 41074010)the Jiangsu Innovation Works Fund of Postgraduate (No. CXZZ11-0299)the Project Funded by the Priority Academic Program Development of Jiangsu Higher Education Institutions (PAPD)
文摘The mining area deformation monitoring theory and method using precise point positioning (PPP) ambi- guity resolution (AR) were studied, and an ambiguity fixing model with satellite and receiver combina- tion phase delay (CPD) was proposed for zero-differenced PPP ambiguity fixing and its corresponding formula derivation was given. The data processing results for I h at six IGS stations in China show that 93% of ambiguities can be fixed within 10 min and all ambiguities can be fixed within 15 min. After ambi- guity fixing, the positioning accuracy is improved by more than 85% in the E and N directions, with abso- lute positioning accuracy reaching millimeter level, and it was improved by 70% in the U direction, reaching centimeter level; the proposed zero-differenced ambiguity fixing model can effectively improve the convergence rate and positioning accuracy in PPP. Data monitoring continuously conducted for half a year at four COPS stations of Shanxi China Coal Pingshuo Group validated the feasibility of using PPP in mining area deformation monitoring.
基金Supported by the Military Major Project for Clinical High-tech and Innovative Technology of China(2010gxjs057)the Municipal Hospitals' Project for Emerging and Frontier Technology of Shanghai(SHDC12010115)the Project for the Key Discipline of Shanghai
文摘Objective:Nephron-sparing surgery(NSS) for small renal masses offers a similar functional and oncological outcome to that of radical surgery.Laparoendoscopic single-site surgery(LESS) emerges as an advanced alternative for reduced invasiveness and improves cosmesis;LESS is developing quickly and its indications have been expanded,but still in its infancy.The aim of this paper is to report our preliminary experience in transumbilical LESS partial nephrectomy(LESS-PN),so as to assess its utility, safety and efficacy.Methods:From August 2009 to October 2010,3 patients underwent transumbilical LESS-PN via a novel multi-channel TriPort by a single experienced urologist in our institution.Patient demographics,perioperative and follow-up data were prospectively collected and analyzed.Results:All the three procedures were successfully completed.A 5-mm ancillary trocar was utilized in all 3 cases.The mean operative duration was 226.3(210-254 min) with an estimated blood loss of 56.7 ml (20-100 ml).Mean warm ischemia time was 35.7 min(19-48 min).One patient was transfused due to postoperative bleeding. The recovery was uneventful and mean length of postoperative stay was 13 days(12-14 days).At the latest follow-up,all patients remained symptom-free and had normal renal function without evidence of recurrence,and they were delighted for a hidden transumbilical scar.Conclusion:Transumbilical LESS-PN is a feasible and safe procedure albeit extremely technically challenging.Surgical outcomes at a median follow-up of 2 years are promising,while currently it should be reserved for highly selected patients with favorable tumor anatomy and performed by a very experienced laparoscopic surgeon.