乡村基层治理“网格化”:模式、架构、效果和法制保障

乡村基层治理“网格化”模式是体现中国特色纠纷解决措施的中国之治,也是实现社会风险化解的精准治理。依据萨维尼法律关系理论,可以发现乡村基层治理“网格化”模式包含着不同的法律关系,有着不同的主体权能。为实现党的十九大报告及十九届四中全会中提出的创新社会治理,提高社会治理水平。应当完善有关立法如人民调解法,建立专业独立的司法体系,加强群众和社会监督,依法规范公权力,防止出现侵权现象和滥用权力现象,使体现东方智慧的新型乡村治理模式焕发鲜活的生命力,助推中华民族伟大复兴。

基于“网格+”的社区重大疫情联防联控机制研究

社区基层网格化治理的工作经验在新冠疫情防控中体现出了重要作用,同时也反映出疫情防控与社区综合治理在"专业性与综合性""强制性与柔性""跨域性与局域性""突发性与常态化"之间的矛盾。面对重大疫情等公共卫生危机,应谋划社区网格治理的升级版,以"网格+"为基本理念,建设"网格+部门"的专群结合体系,形成社区疫情防控专业化合力;打造"网格+服务"的参与性治理路径,强化社区疫情防控人性温度;构筑"网格+联动"的应急处置机制,增强疫情防控整体效能;探索"网格+智控"的辅助治理模式,提升疫情防控精准化水平。

A FVCOM-Based Unstructured Grid Wave, Current,Sediment Transport Model,I.Model Description and Validation

An effort was made to couple FVCOM (a three-dimensional (3D),unstructured grid,Finite Volume Coastal Ocean Model) and FVCOM-SWAVE (an unstructured grid,finite-volume surface wave model) for the study of nearshore ocean processes such as tides,circulation,storm surge,waves,sediment transport,and morphological evolution.The coupling between FVCOM and FVCOM-SWAVE was achieved through incorporating 3D radiation stress,wave-current-sediment-related bottom boundary layer,sea surface stress parameterizations,and morphology process.FVCOM also includes a 3D sediment transport module.With accurate fitting of irregular coastlines,the model provides a unique tool to study sediment dynamics in coastal ocean,estuaries,and wetlands where local geometries are characterized by inlets,islands,and intertidal marsh zones.The model was validated by two standard benchmark tests: 1) spectral waves approaching a mild sloping beach and 2) morphological changes of seabed in an idealized tidal inlet.In Test 1,model results were compared with both analytical solutions and laboratory experiments.A further comparison was also made with the structured grid Regional Ocean Model System (ROMS),which provides an insight into the performance of the two models with the same open boundary forcing.

Frequency-Feedback Based Islanding Detection Algorithm for Micro-Grid

The unintentional islanding of micro-grid may cause negative impacts on distribution loads and distributed generations,so it must be detected within the acceptable duration.In this paper a new islanding detection algorithm is proposed.This algorithm introduces the frequency feedback method by the reactive power compensation to derive the frequency continuous shift. Accordingly,the islanding can be detected by monitoring the frequency within 0.1 s.The simulation results prove that this algorithm has extremely small non-detection zone,and meanwhile it presents an excellent islanding detection speed as well.

Damage Pattern Recognition of Spatially Distributed Slope Damages and Rainfall Using Optimal GIS Mesh Dimensions

Damage assessment for slopes using geographical information system(GIS) has been actively carried out by researchers working on several government organizations and research institutes in Korea. In this study, 596 slope damages were examined to identify the types of damage associated with dip angles, dip directions, and heavy rainfall resulting from typhoons in South Korea. Heavy rainfall of 100 mm to 300 mm resulted in 80% at the investigated slope damages. A GIS database was developed for highways, rainfall, soil or rock geometry, and types of damage. A grid of rainfall intensity was generated from the records of maximum daily rainfall. Contours for slope damages and heavy rainfall using optimal GIS mesh dimensions were generated to visualize damage patterns and show substantially strong correlation of rainfall with slope damages. The combination of remote sensing with the GIS pattern recognition process described in this work are being expanded for a new generation of emergency response and rapid decision support systems.

Numerical simulation and analysis of solid-liquid two-phase threedimensional unsteady flow in centrifugal slurry pump

Based on RNG k-ε turbulence model and sliding grid technique, solid-liquid two-phase three-dimensional(3-D) unsteady turbulence of full passage in slurry pump was simulated by means of Fluent software. The effects of unsteady flow characteristics on solid-liquid two-phase flow and pump performance were researched under design condition. The results show that clocking effect has a significant influence on the flow in pump, and the fluctuation of flow velocity and pressure is obvious, particularly near the volute tongue, at the position of small sections of volute and within diffuser. Clocking effect has a more influence on liquid-phase than on solid-phase, and the wake-jet structure of relative velocity of solid-phase is less obvious than liquid-phase near the volute tongue and the impeller passage outlet. The fluctuation of relative velocity of solid-phase flow is 7.6% smaller than liquid-phase flow at the impeller outlet on circular path. Head and radial forces of the impeller are 8.1% and 85.7% of fluctuation, respectively. The results provide a theoretical basis for further research for turbulence, improving efficient, reducing the hydraulic losses and wear. Finally, field tests were carried out to verify the operation and wear of slurry pump.

Prediction of the Mooring Force of a 2-D Floating Oil Storage Tank

A Constrained Interpolation Profile （CIP）-based model is developed to predict the mooring force of a two-dimensional floating oil storage tank under wave conditions, which is validated against to a newly performed experiment. In the experiment, a box-shaped floating oil storage apparatus is used. Computations are performed by an improved CIP-based Cartesian grid model, in which the THINC/SW scheme （THINC： tangent of hyperbola for interface capturing; SW： Slope Weighting）, is used for interface capturing. A multiphase flow solver is adopted to treat the water-air-body interactions. The Immersed Boundary Method （IBM） is implemented to treat the body surface. Main attention is paid to the sum force of mooring line and velocity field around the body. It is found that the sum force of the mooring line increases with increasing wave amplitude. The body suffers from water wave impact and large body motions occur near the free surface. The vortex occurs near the sharp edge, i.e., the sharp bottom comers of the float- ing oil storage tank and the vortex shedding can be captured by the present numerical model. The present model could be further improved by including turbulence model which is currently under development. Comparison between the computational mooring forces and the measured mooring forces is presented with a reasonable agreement. The developed numerical model can predict the mooring line forces very well.

Correlation Analysis of Gridding of Earthquakes in Datong and Its Surrounding Areas and Implication for Earthquake Prediction

On the basis of the earthquake （gL I〉3.0） catalog in North China from 1970 to 2009, the pattern of temporal and spatial distribution of medium-small earthquakes in Datong and its surrounding areas is studied by correlation analysis with a focus on its anomaly before moderate and strong earthquakes. With different spatial scales, temporal scales and time steps, the spatial distribution of earthquakes is converted to a sequence, then the correlation coefficients between the spatial distribution of medium-small earthquakes in a long-term and a longer time are calculated for the analysis of anomalies before moderate and strong earthquakes. In the study region center on the epicenter of the 1989 Datong- Yanggao earthquake （Ms5. 9） within a radius of less than 0.8~, with the time length of 3600 days, the longer time length of 3700 days, and the time step of 100 days, the correlation coefficient from 1980 to 2009 is steady between 0.94 and 1.00, but there were anomalies with values less than 0. 94 in the 2 years before the 1989 Datong-Yanggao earthquake （Ms 5.9）, the 1991 Datong earthquake （ Ms 5.8） and 1999 Hunyuan earthquake （Ms 5. 6 ）, which indicates the spatial distribution of a medium-small earthquake is very different from steady background seismicity. The implication for earthquake prediction from the anomaly of the correlation coefficient is also discussed with the three conclusions： （1） Before moderate and strong earthquakes in Datong and its surrounding areas, the obvious change of spatial distribution patterns of medium-small earthquake can be a kind of seismic precursor of the 2-year time scale for the prediction of an earthquake＇s time. （2） As the study region is restricted within a radius of less than 0. 8~, the result of correlation analysis is also good for the prediction of an earthquake＇s location. （3） The method of correlation analysis in this paper helps recognize the anomaly of spatial distribution of medium-small earthquake.

Biologically inspired model of path integration based on head direction cells and grid cells

Some neurons in the brain of freely moving rodents show special firing pattern. The firing of head direction cells(HDCs) and grid cells(GCs) is related to the moving direction and distance, respectively. Thus, it is considered that these cells play an important role in the rodents' path integration. To provide a bionic approach for the vehicle to achieve path integration, we present a biologically inspired model of path integration based on the firing characteristics of HDCs and GCs. The detailed implementation process of this model is discussed. Besides, the proposed model is realized by simulation, and the path integration performance is analyzed under different conditions. Simulations validate that the proposed model is effective and stable.

Accurate modelling of the crush behaviour of thin tubular columns using material point method

In this paper,we apply the material point method(MPM),also known as a meshfree method,to examine the crush behaviour of thin tubular columns.Unlike the finite element method,randomly-distributed-weak-particle triggers were used to account for the deformation behaviour of collapse modes.Both symmetric and asymmetric modes of deformation and their associated mean collapse loads are determined for an elasto-plastic constitutive law describing the tubular columns.Attention was devoted to the accuracy and the convergence of the MPM simulation,which is determined by the number of the particles and the size of the background cells used in our explicit solver.Furthermore,a novel contact approach was adopted to establish the crush behaviour of the tubular columns.Two aspects of the work were accordingly examined,including three different crush velocities(5,10 and 15 m/s) and varied geometrical features of the tube(t/d and l/d) based on the deformation history.The results of our model,which were compared with existing analytical predictions and experimental findings,identify the critical geometric features of the tubular columns that would dictate the deformation mode as being either progressive collapse or following Euler's buckling mode.

Verification on Spray Simulation of a Pintle Injector for Liquid Rocket Engine

The pintle injector used for a liquid rocket engine is a newly re-attracted injection system famous for its wide throttle ability with high efficiency. The pintle injector has many variations with complex inner structures due to its moving parts. In order to study the rotating flow near the injector tip, which was observed from the cold flow experiment using water and air, a numerical simulation was adopted and a verification of the numerical model was later conducted. For the verification process, three types of experimental data including velocity distributions of gas flows, spray angles and liquid distribution were all compared using simulated results. The numerical simulation was performed using a commercial simulation program with the Eulerian multiphase model and axisymmetric two dimensional grids. The maximum and minimum velocities of gas were within the acceptable range of agreement, however, the spray angles experienced up to 25% error when the momentum ratios were increased. The spray density distributions were quantitatively measured and had good agreement. As a result of this study, it was concluded that the simulation method was properly constructed to study specific flow characteristics of the pintle injector despite having the limitations of two dimensional and coarse grids.