Based on the characteristics of integrated virtual prototype technology, the mechanical system sub-model, the hydraulic system sub-model and the control system sub-model of a forging manipula- tor system have been bui...Based on the characteristics of integrated virtual prototype technology, the mechanical system sub-model, the hydraulic system sub-model and the control system sub-model of a forging manipula- tor system have been built using a variety of software, and a forging manipulator mtrltidisciplinary co- simulation model has been also built using a method of simulation models interface. Then the simu- lation and experiment are finished, and the result of the experiment is in good agreement with the re- sult of the simulation. It shows that the co-simulation model established can simulate accurately pa- rameter changes in real time during the moving of the forging manipulator such as displacement, ve- locity and pressure flow, which is of important significance for the optimized design of the forging manipulator system to establish the models.展开更多
A method based on the virtual prototype technology simulating the separation of a launch vehicle from its aircraft in the aircraft wake was proposed based on the internally carried air-launched launch vehicle program....A method based on the virtual prototype technology simulating the separation of a launch vehicle from its aircraft in the aircraft wake was proposed based on the internally carried air-launched launch vehicle program.In this method,the full-scale model of the aircraft,the vehicle and the parachute are constructed.Then,they are imported into the ADAMS software,constraint solutions and driving forces are then added for visual dynamic simulation.The unsteady aerodynamic forces of the vehicle in the aircraft wake are calculated by CFD and the moving grid technique.The forces generated by the parachute can be derived from the Kirchhoff motion equation.Through comparing and analyzing the simulation results under different launch conditions,it has been proven that this method simulates the separation of a launch vehicle from the aircraft in the aircraft wake accurately.It provides the foundation for the aggregate project of internally carried air-launch vehicles,and offers a new referenced method for multi-body dynamic simulation.展开更多
The idea of millimeter-wave (MMW) radiometer virtual prototyping is discussed in this paper. Designing environment, designing method and the main modeling components of virtual MMW radiometer are researched. Important...The idea of millimeter-wave (MMW) radiometer virtual prototyping is discussed in this paper. Designing environment, designing method and the main modeling components of virtual MMW radiometer are researched. Important external parameters, which have significant influence to composing system, are used to components modeling, and then components are taken to buildup virtual MMW radiometer system. Moreover, the effect to output is contrasted whether there is a low-noise amplifier or not.展开更多
This study presented the specified steps of comprehensively analyzing the hydraulic-driven hammer system with the application of the Virtual Prototype Technology.By comparing the simulation results with experimental p...This study presented the specified steps of comprehensively analyzing the hydraulic-driven hammer system with the application of the Virtual Prototype Technology.By comparing the simulation results with experimental phenomena and data,the correctness of simulation analysis conclusion is verified.Meanwhile,by means of its perfect visualization,the internal work process which can not be seen before is simulated.The mechanism of some abnormal phenomena encountered during the experiment is explained.展开更多
As multistage gear transmission systems are complex and precise, the flexibility of shaft can influence the dynamic response of system. In order to study dynamic response of the system, we build the rigid model of gea...As multistage gear transmission systems are complex and precise, the flexibility of shaft can influence the dynamic response of system. In order to study dynamic response of the system, we build the rigid model of gear system and the finite element model of the gear shaft. virtual prototype technology, and a contrast between rigid The rigid-flex coupling model is established with the model and rigid-flex coupling model is constructed. With these methods, the dynamic responses with different rotation speeds and different loading magnitudes are examined. We also analyze the influence of shaft flexibility, rotation speeds and loading magnitudes on the vibration characteristics of gear transmission systems.展开更多
基金Supported by the National Natural Science Foundation of China(No.51575471)Collaborative Innovation Program Topics of Heavy Machinery of Yanshan University(2011 Program,No.ZX01-20140400-01)
文摘Based on the characteristics of integrated virtual prototype technology, the mechanical system sub-model, the hydraulic system sub-model and the control system sub-model of a forging manipula- tor system have been built using a variety of software, and a forging manipulator mtrltidisciplinary co- simulation model has been also built using a method of simulation models interface. Then the simu- lation and experiment are finished, and the result of the experiment is in good agreement with the re- sult of the simulation. It shows that the co-simulation model established can simulate accurately pa- rameter changes in real time during the moving of the forging manipulator such as displacement, ve- locity and pressure flow, which is of important significance for the optimized design of the forging manipulator system to establish the models.
基金Supported by the National Natural Science Foundation Programme of China(No.61374145)
文摘A method based on the virtual prototype technology simulating the separation of a launch vehicle from its aircraft in the aircraft wake was proposed based on the internally carried air-launched launch vehicle program.In this method,the full-scale model of the aircraft,the vehicle and the parachute are constructed.Then,they are imported into the ADAMS software,constraint solutions and driving forces are then added for visual dynamic simulation.The unsteady aerodynamic forces of the vehicle in the aircraft wake are calculated by CFD and the moving grid technique.The forces generated by the parachute can be derived from the Kirchhoff motion equation.Through comparing and analyzing the simulation results under different launch conditions,it has been proven that this method simulates the separation of a launch vehicle from the aircraft in the aircraft wake accurately.It provides the foundation for the aggregate project of internally carried air-launch vehicles,and offers a new referenced method for multi-body dynamic simulation.
文摘The idea of millimeter-wave (MMW) radiometer virtual prototyping is discussed in this paper. Designing environment, designing method and the main modeling components of virtual MMW radiometer are researched. Important external parameters, which have significant influence to composing system, are used to components modeling, and then components are taken to buildup virtual MMW radiometer system. Moreover, the effect to output is contrasted whether there is a low-noise amplifier or not.
文摘This study presented the specified steps of comprehensively analyzing the hydraulic-driven hammer system with the application of the Virtual Prototype Technology.By comparing the simulation results with experimental phenomena and data,the correctness of simulation analysis conclusion is verified.Meanwhile,by means of its perfect visualization,the internal work process which can not be seen before is simulated.The mechanism of some abnormal phenomena encountered during the experiment is explained.
基金the National Natural Science Foundation of China(No.71401173)
文摘As multistage gear transmission systems are complex and precise, the flexibility of shaft can influence the dynamic response of system. In order to study dynamic response of the system, we build the rigid model of gear system and the finite element model of the gear shaft. virtual prototype technology, and a contrast between rigid The rigid-flex coupling model is established with the model and rigid-flex coupling model is constructed. With these methods, the dynamic responses with different rotation speeds and different loading magnitudes are examined. We also analyze the influence of shaft flexibility, rotation speeds and loading magnitudes on the vibration characteristics of gear transmission systems.
