A study was conducted to analyze the deformation mechanism of strongly weathered quartz schist in the Daliangshan Tunnel,located in the western Transverse Mountain area.A large deformation problem was experienced duri...A study was conducted to analyze the deformation mechanism of strongly weathered quartz schist in the Daliangshan Tunnel,located in the western Transverse Mountain area.A large deformation problem was experienced during the tunnel construction.To mitigate this problem,a support system was designed incorporating negative Poisson ratio(NPR)anchor cables with negative Poisson ratio effect.Physical model experiments,field experiments,and numerical simulation experiments were conducted to investigate the compensation mechanical behavior of NPR anchor cables.The large deformations of soft rocks in the Daliangshan Tunnel are caused by a high ground stress,a high degree of joint fracture development,and a high degree of surrounding rock fragmentation.A compensation mechanics support system combining long and short NPR anchor cables was suggested to provide sufficient counter-support force(approximately 350 kN)for the surrounding rock inside the tunnel.Comparing the NPR anchor cable support system with the original support system used in the Daliangshan tunnel showed that an NPR anchor cable support system,combining cables of 6.3 m and 10.3 m in length,effectively prevented convergence of surrounding rock deformation,and the integrated settlement convergence value remained below 300 mm.This study provides an effective scientific basis for resolving large deformation problems in deeply buried soft rocks in western transverse mountain areas.展开更多
Engineering shallow,large-span rock tunnels challenges deformation control and escalates construction costs.This study investigates the excavation compensation method(ECM)and its associated technologies to address the...Engineering shallow,large-span rock tunnels challenges deformation control and escalates construction costs.This study investigates the excavation compensation method(ECM)and its associated technologies to address these issues.Utilizing five key technologies,the ECM effectively modulates radial stress post-excavation,redistributes stress in the surrounding rock,and eliminates tensile stress at the excavation face.Pre-tensioning measures further enhance the rock’s residual strength,establishing a new stability equilibrium.Field tests corroborate the method’s effectiveness,demonstrating a crown settlement reduction of 3–8 mm,a nearly 50%decrease compared to conventional construction approaches.Additionally,material consumption and construction duration were reduced by approximately 30%–35%and 1.75 months per 100 m,respectively.Thus,the ECM represents a significant innovation in enhancing the stability and construction efficiency of large-span rock tunnels,marking a novel contribution to the engineering field.展开更多
To prevent sub-harmonic oscillation and improve the stability and load capacity of the system,a piecewise linear slope compensation circuit is designed. Compared with the traditional design, this circuit provides a co...To prevent sub-harmonic oscillation and improve the stability and load capacity of the system,a piecewise linear slope compensation circuit is designed. Compared with the traditional design, this circuit provides a compensation signal whose slope varies from different duty cycles at - 40-85℃ ,and reduces the negative effect of slope compensation on the system＇s load capacity and transient response. A current mode PWM Boost DC-DC converter employing this slope compensation circuit is implemented in a UMC 0.6μm-BCD process. The results indicate that the circuit works well and effectively,and the load capacity is increased by 20%. The chip area of the piecewise linear slope compensation circuit is 0.01mm^2 ,which consumes only 8μA quiescent current,and the efficiency ranges up to 93%.展开更多
A data gathering system is designed for the interferometric fiber optic gyroscope (IFOG) of land strapdown inertial system. IFOG is tested and the testing curve is given. The test data of IFOG are analyzed with Allan ...A data gathering system is designed for the interferometric fiber optic gyroscope (IFOG) of land strapdown inertial system. IFOG is tested and the testing curve is given. The test data of IFOG are analyzed with Allan variance method and each error coefficient is identified. Furthermore, a random drift error model for IFOG is built by the method of time series analysis. The conclusion provides supports for improving IFOG design and compensating for errors of IFOG in practice.展开更多
Based on error analysis, the influence of error sources on strapdown inertial navigation systems is discussed. And the maximum permissible component tolerances are established. In order to achieve the desired accuracy...Based on error analysis, the influence of error sources on strapdown inertial navigation systems is discussed. And the maximum permissible component tolerances are established. In order to achieve the desired accuracy (defined by circular error probability), the types of appropriate sensors are chosen. The inertial measurement unit (IMU) is composed of those sensors. It is necessary to calibrate the sensors to obtain their error model coefficients of IMU. After calibration tests, the accuracy is calculated by uniform design method and it is proved that the accuracy of IMU is satisfied for the desired goal.展开更多
A low voltage bandgap reference with curvature compensation is presented. Using current mode structure, the proposed bandgap circuit has a minimum voltage of 900mV. Compensated through the VEB linearization technique,...A low voltage bandgap reference with curvature compensation is presented. Using current mode structure, the proposed bandgap circuit has a minimum voltage of 900mV. Compensated through the VEB linearization technique, this bandgap reference can reach a temperature coefficient of 10ppmFC from 0 to 150℃. With a 1.1V supply voltage,the supply current is 43μA and the PSRR is 55dB at DC frequency. This bandgap reference has been verified in a UMC 0.18μm mixed mode CMOS technology and occupies 0. 186mm^2 of chip area.展开更多
A bandgap voltage reference is presented with a piecewise linear compensating circuit in order to reduce the temperature coefficient.The basic principle is to divide the whole operating temperature range into some su...A bandgap voltage reference is presented with a piecewise linear compensating circuit in order to reduce the temperature coefficient.The basic principle is to divide the whole operating temperature range into some sub ranges.At different temperature sub ranges the bandgap reference can be compensated by different linear functions.Since the temperature sub range is much narrower than the whole range,the compensation error can be reduced significantly.Theoretically,the precision can be improved unlimitedly if the sub ranges are narrow enough.In the given example,with only three temperature sub ranges,the temperature coefficient of a conventional bandgap reference drops from 1 5×10 -5 /℃ to 2×10 -6 /℃ over the -40℃ to 120℃ temperature range.展开更多
This research was to introduce the characteristics of and countermeasures for ecological compensation. From the analysis of the current situation of ecological compensation, a series of characteristics of ecological c...This research was to introduce the characteristics of and countermeasures for ecological compensation. From the analysis of the current situation of ecological compensation, a series of characteristics of ecological compensation in resource exploitation and economic development were elaborated. The principles and practical issues are complex in ecological compensation, and the corresponding object, entity, financial system of ecological compensation are the keys to set up compensation mechanism, and studying of ecosystem service function and ecological footprint calculation are important ways to quantitatively assess ecological compensation, and are also important foundations for establishing calculation system of green GDP. Advocating the benefit compensation mechanism of ecological economy and enclosing ecological compensation principle are important ways for establishing the new environmental management pattern and manifesting social justice and the ecological civilization ideas. This research proposed some views of and approaches to ecological compensation mechanism for constructing natural resource development and utilization.The establishment of ecological compensation is an important approach to prevent the imbalance of resource allocation, the system guarantee for sustainable development, and the important basis of saving resources.展开更多
Signal to noise ratio （SNR） and resolution are two important but contradictory characteristics used to evaluate the quality of seismic data. For relatively preserving SNR while enhancing resolution, the signal purit...Signal to noise ratio （SNR） and resolution are two important but contradictory characteristics used to evaluate the quality of seismic data. For relatively preserving SNR while enhancing resolution, the signal purity spectrum is introduced, estimated, and used to define the desired output amplitude spectrum after deconvolution. Since a real reflectivity series is blue rather than white, the effects of white reflectivity hypothesis on wavelets are experimentally analyzed and color compensation is applied after spectrum whitening. Experiments on real seismic data indicate that the cascade of the two processing stages can improve the ability of seismic data to delineate the geological details.展开更多
On the basis of analysis of the present situation of the ecological benefit compensation in China and foreign countries, this paper discusses the necessity, principle and approach of establishing the compensation mech...On the basis of analysis of the present situation of the ecological benefit compensation in China and foreign countries, this paper discusses the necessity, principle and approach of establishing the compensation mechanism of forest ecological benefit, as well as compensation standard in order to provide scientific basis for further perfecting the compensation mechanism of forest ecological engineering benefit in China. It is suggested that setting up the compensation mechanism of forest ecological benefit can not only provide the steady funds source of managing and protecting forest resources, but resolve radically the dynamic and mechanism problems of commonweal forest ecological engineering construction, which will produce a widespread and profound influence on China forestry and ecological construction.展开更多
基金Project(41941018)supported by the National Natural Science Foundation of China for the Special Project FundingProject(22-JKCF-08)supported by the Study on in-situ Stress Database and 3D in-situ Stress Inversion Technology of Highway Tunnel in Shanxi Province,China+1 种基金Project(2022-JKKJ-6)supported by the Study on Disaster Mechanism and NPR Anchor Cable Prevention and Control of Coal Mining Caving Subsidence in Operating Tunnel in Mountainous Area,ChinaProject(BBJ2024032)supported by the Fundamental Research Funds for the Central Universities(PhD Top Innovative Talents Fund of CUMTB),China。
文摘A study was conducted to analyze the deformation mechanism of strongly weathered quartz schist in the Daliangshan Tunnel,located in the western Transverse Mountain area.A large deformation problem was experienced during the tunnel construction.To mitigate this problem,a support system was designed incorporating negative Poisson ratio(NPR)anchor cables with negative Poisson ratio effect.Physical model experiments,field experiments,and numerical simulation experiments were conducted to investigate the compensation mechanical behavior of NPR anchor cables.The large deformations of soft rocks in the Daliangshan Tunnel are caused by a high ground stress,a high degree of joint fracture development,and a high degree of surrounding rock fragmentation.A compensation mechanics support system combining long and short NPR anchor cables was suggested to provide sufficient counter-support force(approximately 350 kN)for the surrounding rock inside the tunnel.Comparing the NPR anchor cable support system with the original support system used in the Daliangshan tunnel showed that an NPR anchor cable support system,combining cables of 6.3 m and 10.3 m in length,effectively prevented convergence of surrounding rock deformation,and the integrated settlement convergence value remained below 300 mm.This study provides an effective scientific basis for resolving large deformation problems in deeply buried soft rocks in western transverse mountain areas.
基金Projects(42377148,51674265)supported by the National Natural Science Foundation of ChinaProject(2018YFC0603705)supported by the National Key Research and Development Program of China。
文摘Engineering shallow,large-span rock tunnels challenges deformation control and escalates construction costs.This study investigates the excavation compensation method(ECM)and its associated technologies to address these issues.Utilizing five key technologies,the ECM effectively modulates radial stress post-excavation,redistributes stress in the surrounding rock,and eliminates tensile stress at the excavation face.Pre-tensioning measures further enhance the rock’s residual strength,establishing a new stability equilibrium.Field tests corroborate the method’s effectiveness,demonstrating a crown settlement reduction of 3–8 mm,a nearly 50%decrease compared to conventional construction approaches.Additionally,material consumption and construction duration were reduced by approximately 30%–35%and 1.75 months per 100 m,respectively.Thus,the ECM represents a significant innovation in enhancing the stability and construction efficiency of large-span rock tunnels,marking a novel contribution to the engineering field.
文摘To prevent sub-harmonic oscillation and improve the stability and load capacity of the system,a piecewise linear slope compensation circuit is designed. Compared with the traditional design, this circuit provides a compensation signal whose slope varies from different duty cycles at - 40-85℃ ,and reduces the negative effect of slope compensation on the system＇s load capacity and transient response. A current mode PWM Boost DC-DC converter employing this slope compensation circuit is implemented in a UMC 0.6μm-BCD process. The results indicate that the circuit works well and effectively,and the load capacity is increased by 20%. The chip area of the piecewise linear slope compensation circuit is 0.01mm^2 ,which consumes only 8μA quiescent current,and the efficiency ranges up to 93%.
文摘A data gathering system is designed for the interferometric fiber optic gyroscope (IFOG) of land strapdown inertial system. IFOG is tested and the testing curve is given. The test data of IFOG are analyzed with Allan variance method and each error coefficient is identified. Furthermore, a random drift error model for IFOG is built by the method of time series analysis. The conclusion provides supports for improving IFOG design and compensating for errors of IFOG in practice.
文摘Based on error analysis, the influence of error sources on strapdown inertial navigation systems is discussed. And the maximum permissible component tolerances are established. In order to achieve the desired accuracy (defined by circular error probability), the types of appropriate sensors are chosen. The inertial measurement unit (IMU) is composed of those sensors. It is necessary to calibrate the sensors to obtain their error model coefficients of IMU. After calibration tests, the accuracy is calculated by uniform design method and it is proved that the accuracy of IMU is satisfied for the desired goal.
文摘A low voltage bandgap reference with curvature compensation is presented. Using current mode structure, the proposed bandgap circuit has a minimum voltage of 900mV. Compensated through the VEB linearization technique, this bandgap reference can reach a temperature coefficient of 10ppmFC from 0 to 150℃. With a 1.1V supply voltage,the supply current is 43μA and the PSRR is 55dB at DC frequency. This bandgap reference has been verified in a UMC 0.18μm mixed mode CMOS technology and occupies 0. 186mm^2 of chip area.
文摘A bandgap voltage reference is presented with a piecewise linear compensating circuit in order to reduce the temperature coefficient.The basic principle is to divide the whole operating temperature range into some sub ranges.At different temperature sub ranges the bandgap reference can be compensated by different linear functions.Since the temperature sub range is much narrower than the whole range,the compensation error can be reduced significantly.Theoretically,the precision can be improved unlimitedly if the sub ranges are narrow enough.In the given example,with only three temperature sub ranges,the temperature coefficient of a conventional bandgap reference drops from 1 5×10 -5 /℃ to 2×10 -6 /℃ over the -40℃ to 120℃ temperature range.
基金Supported by National Key Project of Scientific and Technical Supporting Programs Funded by Ministry of Science&Technology(2006BAD26B0902)National Program on Key Basic Research Project(973program)(2006CB705809)+2 种基金Knowledge Innovation Program of the Chinese Academy of Sciences(KSCX-YW-09)Program of Soft Sciences from China Meteorological Administration(QR2008-39)Scientific Re-search Fund of Nanjing University of Information Science and Technology(20070105)~~
文摘This research was to introduce the characteristics of and countermeasures for ecological compensation. From the analysis of the current situation of ecological compensation, a series of characteristics of ecological compensation in resource exploitation and economic development were elaborated. The principles and practical issues are complex in ecological compensation, and the corresponding object, entity, financial system of ecological compensation are the keys to set up compensation mechanism, and studying of ecosystem service function and ecological footprint calculation are important ways to quantitatively assess ecological compensation, and are also important foundations for establishing calculation system of green GDP. Advocating the benefit compensation mechanism of ecological economy and enclosing ecological compensation principle are important ways for establishing the new environmental management pattern and manifesting social justice and the ecological civilization ideas. This research proposed some views of and approaches to ecological compensation mechanism for constructing natural resource development and utilization.The establishment of ecological compensation is an important approach to prevent the imbalance of resource allocation, the system guarantee for sustainable development, and the important basis of saving resources.
基金supported by the National Natural Science Foundation of China(Grant No.41174117)PetroChina Innovation Foundation(Grant No.2010D-5006-0301)
文摘Signal to noise ratio （SNR） and resolution are two important but contradictory characteristics used to evaluate the quality of seismic data. For relatively preserving SNR while enhancing resolution, the signal purity spectrum is introduced, estimated, and used to define the desired output amplitude spectrum after deconvolution. Since a real reflectivity series is blue rather than white, the effects of white reflectivity hypothesis on wavelets are experimentally analyzed and color compensation is applied after spectrum whitening. Experiments on real seismic data indicate that the cascade of the two processing stages can improve the ability of seismic data to delineate the geological details.
基金this study was supported by National Forestry Sci-ence and Technology Support Program (No.2006BAD03A15)Key laboratory of Forest Silvculture of the State Forestry Ministration’ Sus-tentation Fund
文摘On the basis of analysis of the present situation of the ecological benefit compensation in China and foreign countries, this paper discusses the necessity, principle and approach of establishing the compensation mechanism of forest ecological benefit, as well as compensation standard in order to provide scientific basis for further perfecting the compensation mechanism of forest ecological engineering benefit in China. It is suggested that setting up the compensation mechanism of forest ecological benefit can not only provide the steady funds source of managing and protecting forest resources, but resolve radically the dynamic and mechanism problems of commonweal forest ecological engineering construction, which will produce a widespread and profound influence on China forestry and ecological construction.
