Investigation of Heavy Metal Contents in Traditional Chinese Herbal Medicine Peristrophe roxburghiana Collected from Northwest of Guangxi

Objective] This study was conducted to evaluate the product quality and safety of Peristrophe roxburghiana_ col ected from different places in Hechi City, northwest of Gunagxi, so as to provide basic data for further development and uti-lization of the characteristic plant resource P. roxburghiana. [Method] Contents of 9 kinds of heavy metals including Cd, Mn, Pb, Zn and Cu in the herb were deter-mined by the method of wet digestion-flame atomic absorption spectrophotometry and atomic fluorescence spectrometry, respectively. [Results] Heavy metal contents of Cd, Mn, Pb, Fe, Cu, Zn, As, Hg and Se were 1.62-17.25, 8.93-142.53, 4.37-18.43, 103.7-242.81, 2.55-5.35, 85.40-146.30, 0.07-0.54, 0.00-0.08 and 0.00-0.47 mg/kg, respectively. According to the national food safety standards and Green Trade Standards of lmporting ＆amp; Exporting Medicinal plants ＆amp; Preparations, the heavy metal contents of the P. roxburghiana_samples col ected from different coun-ties in Hechi City exceeded standards or at the critical values. Among which, Cd, Pb and Zn contents of the samples are seriously higher than the standards. [Con-clusion] Therefore, the impact of soil heavy metal pol ution on the safety of edible plants in the northwest of Guangxi should be highly concerned.

Investigation and Analysis of Pesticide Residues in Citrus from Parts of Hubei Province

The analysis of pesticide residues in Citrus from Yichang, Danjiangkou, Zigui and Xingshan in Hubei Province was accomplished by UPLC-MS and GC-MS. The results showed that the detection rate of pesticide residues in Citrus reticulate was 91.9%. The detection rate of banned pesticides was 1.6%. The detection rate of restricted pesticides was 9.5%. The detection rate of allowed pesticides was 68.3%. The detection rate of unregistered pesticides was 15.9%. The pesticide used in citrus was relatively common. Because of the banned and restricted pesticides were both in the control degree, on the whole, the quality and security of Citrus reticulata was safe.

Design and Implementation of Traceability Management System of Agricultural Products Quality and Safety Based on Domestic Basic Software of China

[Objective] To establish the traceability mechanism of agricultural products safety, and the application of promote domestic based software in the supervision area of agricultural products quality and safety. [Method] Through the analysis on the circulation characteristics of agricultural products, like fruits, vegetables, livestock and poultry, the agricultural products quality safety management and traceability query business component libraries were designed. Based on the run-time-supporting environment provided by domestic based software, traceability management system of agricultural products quality and safety was constructed. [Result] The traceability management system provided the information interaction and comprehensive management platform of agricultural product quality and safety based on domestic based software for the government, enterprises and consumers. [Conclusion] Through the application demonstration, the quality control and information traceability of full circulation of agricultural products was achieved effective and reliably, and the management level of agricultural products quality and safety was improved.

Evaluation on Soil Heavy Metal Pollution of Agricultural Habitat Environment in Xi'an City

[Objective] This study aimed to understand and grasp the soil heavy metal pollution status of agricultural habitat environment in Xi＇an City. [Method] The soil heavy metal pollution status of pollution-free agricultural products-producing areas in 9 counties （districts） of Xi＇an City was investigated. A total of 609 soil samples were collected, and their Cd, Hg, As, Pb and Cr contents were determined. In addition, the heavy metal pollution status of the collected soil samples was evaluated by Nemerow index method. [Result] The pollution in Baqiao, Chang＇an; Gaoling, Lan- tian, Lintong and Yanliang was of grade I, belonging to clean level; the pollution in Hu County, Weiyang and Zhouzhi was of grade II, near the warning line, belong to relatively clean level. There was no large-area soil heavy metal pollution overall. The investigated areas could be used as production bases of pollution-free agricultural products and even high-quality agricultural products. However, the heavy met- als contents in some individual areas exceeded relevant soil environmental quality standards, and they should be avoided or forbidden during regional planning and selection of production area. [Conclusion] Soil heavy metal pollution of agricultural habitat environment in Xi＇an City is generally at good status. Targeting at the future development plan of Xi＇an City, feasible and scientific suggestions are put forward.

Thoughts on Establishment of the Agricultural Products Quality and Safety(Standards) Cooperation Center in Asia-Pacific Region

The establishment of agricultural products quality and safety cooperation mechanism and the research demonstration center in the Asia-Pacific reg coordinating each other, is not only of great ening cooperation with countries in Asia-Pacific region and for agricultural production safety of those countries in Asia- Pacific region, but also very necessary for our country to build a responsible image in the quality and safety of agricultural products, protection of the benefit of agriculture-related enterprises, increasing exports, ensuring imported food safety and China＇s national food security, as Well as nice exploration of establishing the global agricultural＇ products quality and safety cooperation center.

What is the optimal treatment for appendiceal mass formed after acute perforated appendicitis?

We read with great interest the editorial article by Meshikhes AWN published in issue 25 of World J Gastroenterol 2011.The article described the advantages of emergency laparoscopic appendectomy compared with interval appendectomy as a new safe treatment modality for the appendiceal mass.The author concluded that the emergency laparoscopic appendectomy was a safe treatment modality for the appendiceal mass,and might prove to be more cost-effective than conservative treatment,with no need for interval appendectomy.However,we would like to highlight certain issues regarding the possibility of percutaneous catheter drainage to successfully treat the appendiceal mass,with no need for appendectomy,too.

Combinative Approaches of Chemistry, Pharmacology and Toxicology for the Optimal Pharmaceutical Preparation of an Anti-arthritic Chinese Medicine Formulation QFJBT

Objective Qing Fu Juan Bi Tang(QFJBT)is an anti-arthritic Chinese medicine formula consisting of five herbs:Aconiti Lateralis Radix Praeparata(Fu Zi,附子),Sinomenii Caulis(Qing Feng Teng,青风藤),Astragali Radix(Huang Qi,黄芪),Paeoniae Radix Alba(Bai Shao,白芍)and Moutan Cortex(Mu Dan Pi,牡丹皮),which have well-established histories of use for treatment of rheumatic and arthritic diseases.We intended to establish the optimized and standardized pharmaceutical procedures and manufacturing processes for the pilot production of QFJBT to develop it as a novel botanical drug product for treatment of rheumatoid arthritis(RA).Methods The combinative approaches of chemical assessment,toxicological and pharmacological evaluation were explored to define the pharmaceutical preparation of QFJBT.Results The optimized and standardized pharmaceutical procedures and manufacturing processes for the pilot production of QFJBT were established in terms of greatest chemical contents of bioactive constituents,potent anti-inflammatory and antinociceptive activities,and favorable safety profile.Quality analysis of the pilot product of QFJBT by high-performance liquid chromatography(HPLC)demonstrated that the chromatographic fingerprint profiles of three batches of QFJBT were basically identical and the contents of four characteristic and bioactive markers were relatively consistent.General toxicological studies showed a favorable safety profile of QFJBT.The maximum tolerated single dose of QFJBT was determined in both sexes of rats to be 33.63 g/kg body weight which is equivalent to 346 times of clinical dose.In the chronic oral toxicity study,the results of laboratory investigation showed that QFJBT at doses of 3.89,6.80 and 9.72 g/kg body weight(equivalent to 40,70 and 100-fold clinical doses,respectively)caused no changes in all hematological parameters and blood biochemical parameters of rats.No mortality or specific toxic responses were observed in animals after three months of repeated dosing with QFJBT.Conclusion The optimized and standardized pharmaceutical and manufacturing processes for the production of QFJBT have been successfully screened and identified through established rigorous in-process controls.

Physical Layer Security in MIMO Wiretap Channels with Antenna Correlation

To investigate the impact of antenna correlation on secrecy performance in MIMO wiretap channels with Nakagami-m fading, the expressions of secrecy outage probability and positive secrecy probability were derived. Diversity order and array gain were also achieved for further insight. The study was based on the information theory that physical layer security can be guaranteed when the quality of the main channel is higher than that of the eavesdropper's channel. Monte Carlo simulations well validated the numerical results of analytic expressions. It was shown that antenna correlation is detrimental to secrecy performance when average SNR of the main channel is at medium and high level. Interestingly, when average SNR of the main channel reduces to low level, the effect of antenna correlation becomes benefi cial to secrecy performance.

MECHANISM ON PROGRESSIVE INTRUSION OF PRESSURE WATER UNDER COAL SEAMS INTO PROTECTIVE AQUICLUDE AND ITS APPLICATION IN PREDICTION OF WATER INRUSH

This article proposes a water inrush mechanism of progressive intrusion of pressure water up into the coal floor aquiclude according to injection tests and observations. A numerical model and a criterion of water inrush are established based on the mechanism. The theory is succesSfully used in predictions of water inrush.

Exploration of Factors Influencing Oolong Quality and Control Technology in Anxi County

In the research, harmful substances to oolong in Anxi were introduced and production environment, agricultural residual, heavy metal and rare earth ele-ments of oolong in Anxi were analyzed. Furthermore, the factors influencing oolong quality were explored, and the control measures for guaranteeing oolong safety were proposed.

Discussions and Recommendations for Supervision of Vegetable Quality and Safety in Miyun County

Vegetable is a pillar industry of agriculture in Miyun County. Improving vegetable quality and ensuring consumers rest assured in consumption are essential for promoting increase of agricultural efficiency and farmers＇ income, and also the necessity for promoting sustainable development of vegetable industry. This paper elaborated current situations of vegetable production and quality and safety in Miyun County, summarized practice and exploration in supervision of vegetable quality and safety, and came up with recommendations for reinforcing supervision of vegetable quality and safety in view of weak points.

Study on life-cycle risk management of high earth-rock dam project

Based on advanced computer technology, internet of things （lOT） technology, project management con- cept and professional technology and combined with the innovative theories, methods and techniques in earlier hy- dropower projects, the life-cycle risk management system of high earth-rock dam project for Nuozhadu project was developed. The system mainly includes digital dam, three-dimensional design, construction quality monito- ring, safety assessment and warning, etc, to integrally manage and analyze the dam design, constructional quality and safety monitoring information. It realized the dynamic updates of the comprehensive information and the safe- ty quality monitoring in the project life cycle, and provided the basic platform for the scientific management of the construction and operation safety of high earth-rock dam. Application in Nuozhadu earth-rock dam showed that construction safety monitoring and warning greatly helped accelerate the construction progress and improve project quality, and provided a new way for the quality safety control of high earth-rock dam.

Model of Integrated Management System for Quality and Food Safety of Biscuit Products

The revised version of ISO 9001：2015 places a demand before many food producers to face the problem of updating the old or developing new food quality and safety management systems. In order to help the organizations in this endeavor, this paper presents a model for planning and implementation of IMS （integrated management system） for quality and food safety, using the example of biscuit products manufacturing, and explains its conception. The integrative approach is based on the synergetic effect between the mutually related business processes. It has been established that the introduction of the model can help the biscuit producers in efficiently addressing such challenges as limited resources, increasing competition, as well as higher expectations of customers and other stakeholders.

Food Physics and Food Safety- Some Aspects in Food Processing and Food Quality Control

The article deals with special questions of some aspects of food safety and application of methods of food physics in food processing and also in food quality control and quality assurance. The role of food safety has developed significantly in the last 2 decades, so today the production and processing of safe and quality food is of primary importance. Modem food production is based on principles of GAP and GMP （including GHP） and different methods and tools for quality control and assurance （IFS, HACCP, ISO-9000, ISO-9000/2010, ISO-22000, TQM）. There are different techniques and methods to produce safe food and to control the quality of the foodstuffs. The modem, up-to-date technologies and measurement techniques involve the application of many physical methods - high pressure, pulsing electrical field, microwave, non-destructive techniques （e.g., INAA, NMR, NIR-NIT, PAS）, radiation treatments as well. Using radiation technologies （of course not only nuclear ones） it is possible to fulfil some very important expectations of modem food processing, e.g., decrease of microbial contamination, improvement of sensory properties, increase of storability of food products.

Research on Application of RFID Technology in the Agricultural Product Quality and Safety Traceability System

Through the study of individual identification technology, the paper put forward the identification scheme for two-dimensional code ear tag ＋ RFID electronic tag, namely using Ministry of agriculture regulations two-dimensional code ear tag to identify individual animal in the breeding stage, and record the basic information and breeding, using the RFID electronic identification tag to record slaughter quarantine information; phase, and finally the ear tag code, RFID electronic tag and product number should be encode relatively to generate tracing code in the final agricultural products, realize the smooth flow of the information flow from the breeding stage to the final product. For fruits and vegetables, agricultural products are adopted the common identification for orchard （greenhouse） numbers units.

Research on Contract Management and Control in the Process of Project Cost

In the current economic situation, strengthening the contract management of the construction cost has a beautifully role. At the same time, according to construction project cost management, the scientific management of the contract, can promote the reasonable and balanced investment cost allocation in the quality and safety and other aspects of the project, so that the construction project can obtain higher added value, and to further promote China＇ s economic construction and accelerate the pace of the city. This paper first briefly elaborates our construction project cost of the contract management on the present situation, and some problems are analyzed and discussed, and then puts forward some suggestions on the measures and countermeasures for cost management of construction engineering contract.

Toward Energy-Efficient and Trustworthy eHealth Monitoring System

The rapid technological convergence between Internet of Things （loT）, Wireless Body Area Networks （WBANs） and cloud computing has made e-healthcare emerge as a promising application domain, which has significant potential to improve the quality of medical care. In particular, patient-centric health monitoring plays a vital role in e-healthcare service, involving a set of important operations ranging from medical data collection and aggregation, data transmission and segregation, to data analytics. This survey paper firstly presents an architectural framework to describe the entire monitoring life cycle and highlight the essential service components. More detailed discussions are then devoted to {／em data collection} at patient side, which we argue that it serves as fundamental basis in achieving robust, efficient, and secure health monitoring. Subsequently, a profound discussion of the security threats targeting eHealth monitoring systems is presented, and the major limitations of the existing solutions are analyzed and extensively discussed. Finally, a set of design challenges is identified in order to achieve high quality and secure patient-centric monitoring schemes, along with some potential solutions.

How PDCA cycle implementation improved surgical time-out compliance rate

Objective： To explore the effect of PDCA-cycle in improving time-out compliance rate and improvement in quality and safety management of surgery. Methods： We improved time-out compliance rate by using PDCA-cycle （a quality improvement tools）. Data were collected before and after the implementation of PDCA-cycle. The results were analyzed. Results： After implementation of PDCA-cycle, over all time-out compliance rate was increased from 80% to 99.8% （P=0.000）. The compliance rate of identifying patient, performing site marking before surgery, verification of correct-site and correct procedure were increased from 85.1%, 79.2%, 89.7% and 89.1% to 99.8%, 99.9%, 100% and 100% （P〈0.05） respectively. Conclusion： Our study validated the PDCA-cycle methodology improves time-out compliance rate, and it is one of the most effective quality improvement tools for hospital management.