意象与结构的微妙诗韵——论埃兹拉·庞德“超位法”中的俳句美学

英美意象派代表人物埃兹拉·庞德提出的著名的“超位法”,吸收了日本俳句的美学原则。他的诗歌通过意象之间的轻柔叠合而复现瞬间的情绪,是对俳句审美意蕴的模仿,而二分句的形式则是对俳句中“基底层”与“干涉层”在结构上的呼应。比较分析庞德“超位法”与日本俳句的具体联系,有助于探索东西方诗学互鉴的限度与新的可能。

Life detection and location methods using UWB impulse radar in a coal mine

An ultra-wideband impulse radar was studied for the detection of buried life in coal mines. An improved Empirical Mode Decomposition (EMD) method based on a cross-correlation filter was proposed for reduction of multipath and noise interference. Multipath interference was first removed by cross-corre- lation filtering. Then the delays of each pulse in every echo were summed. An EMD algorithm was used for noise reduction for the total delay of each echo. The corresponding EMD results of every echo were then summed and averaged. Finally, evidence for the existence of buried life and their position were obtained from amplitude-frequency curves of the averaged EMD results. Detailed simulation experi- ments are presented to validate the effectiveness of this proposed method. The experimental results show that this method can efficiently eliminate multipath interference and reduce noise interference in echoes, which makes detection and location of buried life in coal mines more accurate.

The radial self-positioning algorithm of intelligent ultrasonic probe array in oil/gas pipeline

The working principle of the pipeline intelligent pig and the structure of ultrasonic probe array used to detect defects in oil/gas pipeline are introduced. The effects of the array＇ s radial position in pipe on defect resolution are analyzed. The causes leading to radial positioning error are investigated. An algo- rithm for the radial self-positioning is presented. The experimental results show that the radial self-positioning algorithm can eliminate the array＇ s space position error effectively and improve the defect resolution.

Long Distance GIL PD Fault Localization Method Based on Amplitude Difference and Time Difference Calculation of UHF Coupling Signal

In the long distance GIL under certain conditions, this paper researches and realizes detection of PD characters and accurate fault localization through UHF coupling sensors at different positions of the GIL pipeline. The main methods for the detection are UHF signal amplitude difference （DOA） and time difference （TOF）. We analyze the localization error by using TE and TEM component and high order TE mode component in electromagnetic coaxial wave guide theory. Research and field test prove the DOA detection error can meet the requirements of real-time online diagnosis and for history tracking analysis. The error of TOF detection method can be controlled within 3% and can be applied to the site.

Supersolid Phase in One-Dimensional Hard-Core Boson Hubbard Model with a Superlattice Potential

The ground state of the one-dimensional hard-core boson Hubbard model with a superlattice potential is studied by quantum Monte Carlo methods. We demonstrate that besides the CDW phase and the Mott insulator phase, the supersolid phase emerges due to the presence of the superlattice potential, which reflects the competition with the hopping term. We also study the densities of sublattices and have a clear idea about the distribution of the bosons on the lattice.

Efficient One-Step Generation of Cluster State with Charge Qubits in Circuit QED

t We propose theoretical schemes to generate highly entangled cluster state with superconducting qubits in a circuit QED architecture. Charge qubits are located inside a superconducting transmission line, which serves as a quantum data bus. We show that large clusters state can be efficiently generated in just one step with the longrange Ising-like unitary operators. The quantum operations which are generally realized by two coupling mechanisms： either voltage coupling or current coupling, depend only on global geometric features and are insensitive not only to the thermal state of the transmission line but also to certain random operation errors. Thus high-fidelity one-way quantum computation can be achieved.

Implementation of a Controlled-Phase Gate and Deutsch-Jozsa Algorithm with Superconducting Charge Qubits in a Cavity

Based on superconducting quantum interference devices （SQUIDs） coupled to a cavity, we propose a scheme for implementing a quantum controlled-phase gate （QPG） and Deutsch-Jozsa （D J） algorithm by a controllable interaction. In the present scheme, the SQUID works in the charge regime, and the cavity field is ultilized as quantum data-bus, which is sequentially coupled to only one qubit at a time. The interaction between the selected qubit and the data bus, such as resonant and dispersive interaction, can be realized by turning the gate capacitance of each SQUID. Especially, the bus is not excited and thus the cavity decay is suppressed during the implementation of DJ algorithm. For the QPG operation, the mode of the bus is unchanged in the end of the operation, although its mode is really excited during the operations. Finally, for typical experiment data, we analyze simply the experimental feasibility of the proposed scheme. Based on the simple operation, our scheme may be realized in this solid-state system, and our idea may be realized in other systems.

Design of a Dedicated Reconfigurable Multiplier in an FPGA

We design a reconfigurable pipelined multiplier embedded in an FPGA. This design is based on the modified Booth algorithm and performs 18 × 18 signed or 17 × 17 unsigned multiplication. We propose a novel method for circuit optimization to reduce the number of partial products. A new layout floorplan design of the multiplier block is reported to comply with the constraints imposed by the tile-based FPGA chip design. The multiplier can be configured as synchronous or asynchronous. Its operation can also be configured as pipelined for high-frequency operation. This design can be easily extended for different input and output bit-widths. We employ a novel carry look-ahead adder circuit to generate the final product. The transmission-gate logic is used for the low-level circuits throughout the entire multiplier for fast logic operations. The design of the multiplier block is based on SMIC 0.13μm CMOS technology using full-custom design methodology. The operation of the 18 × 18 multiplier takes 4. lns. The two-stage pipelined operation cycle is 2.5ns. This is 29.1% faster than the commercial multiplier and is 17.5% faster than the multipliers reported in other academic designs. Compared with the distributed LUT-based multiplier,it demonstrates an area efficiency ratio of 33 ： 1.

A fast automatic recognition and location algorithm for fetal genital organs in ultrasound images

Severe sex ratio imbalance at birth is now becoming an important issue in several Asian countries. Its leading immediate cause is prenatal sex-selective abortion following illegal sex identification by ultrasound scanning. In this paper, a fast automatic recognition and location algorithm for fetal genital organs is proposed as an effective method to help prevent ultrasound technicians from unethically and illegally identifying the sex of the fetus. This automatic recognition algorithm can be divided into two stages. In the 'rough' stage, a few pixels in the image, which are likely to represent the genital organs, are automatically chosen as points of interest (POIs) according to certain salient characteristics of fetal genital organs. In the 'fine' stage, a specifically supervised learning framework, which fuses an effective feature data preprocessing mechanism into the multiple classifier architecture, is applied to every POI. The basic classifiers in the framework are selected from three widely used classifiers: radial basis function network, backpropagation network, and support vector machine. The classification results of all the POIs are then synthesized to determine whether the fetal genital organ is present in the image, and to locate the genital organ within the positive image. Experiments were designed and carried out based on an image dataset comprising 658 positive images (images with fetal genital organs) and 500 negative images (images without fetal genital organs). The experimental results showed true positive (TP) and true negative (TN) results from 80.5% (265 from 329) and 83.0% (415 from 500) of samples, respectively. The average computation time was 453 ms per image.

Mott insulator-superfluid phase transition in a detuned multi-connected Jaynes-Cummings lattice

The connectivity and tunability of superconducting quantum devices provide a rich platform to build quantum simulators and study novel many-body physics. Here we study quantum phase transition in a detuned multi-connected Jaynes-Cummings lattice, which can be constructed with superconducting circuits. This model is composed of alternatively connected qubits and cavity modes.Using a numerical method, we show that by varying the detuning between the qubits and the cavities, a phase transition from the superfluid phase to the Mott insulator phase occurs at commensurate fillings in a one-dimensional array. We study the phase transition in lattices with symmetric and asymmetric couplings, respectively.