Automatic signature generation approaches have been widely applied in recent traffic classification.However,they are not suitable for LightWeight Deep Packet Inspection(LW_DPI) since their generated signatures are mat...Automatic signature generation approaches have been widely applied in recent traffic classification.However,they are not suitable for LightWeight Deep Packet Inspection(LW_DPI) since their generated signatures are matched through a search of the entire application data.On the basis of LW_DPI schemes,we present two Hierarchical Clustering(HC) algorithms:HC_TCP and HC_UDP,which can generate byte signatures from TCP and UDP packet payloads respectively.In particular,HC_TCP and HC_ UDP can extract the positions of byte signatures in packet payloads.Further,in order to deal with the case in which byte signatures cannot be derived,we develop an algorithm for generating bit signatures.Compared with the LASER algorithm and Suffix Tree(ST)-based algorithm,the proposed algorithms are better in terms of both classification accuracy and speed.Moreover,the experimental results indicate that,as long as the application-protocol header exists,it is possible to automatically derive reliable and accurate signatures combined with their positions in packet payloads.展开更多
In high seismic regions of the world, including Turkey, there are too many low-rise residential buildings made of rigid masonry walls or flexible moment-resistant frames with brittle masonry partitioning walls. During...In high seismic regions of the world, including Turkey, there are too many low-rise residential buildings made of rigid masonry walls or flexible moment-resistant frames with brittle masonry partitioning walls. During even moderate earthquakes, these buildings suffer heavy damages and brittle failures causing hundreds if not thousands of people to lose their lives and homes. Hence it is essential to build a house with lightweight materials that have an earthquake resistance with a proper safety. Recently in some countries such as USA, Italy, China and Turkey; a new building system called 3D wire panel building system use prefabricated lightweight panels to construct low-rise buildings up to three stories. The panels are fabricated from polystyrene, steel, and shotcrete concrete .The lightweight of these panels, easy handling, high construction speed, good heat insulation properties, in addition to their low cost by avoiding formwork and need for skilled workers make it an acceptable construction practice. In the literature, there is no enough information on the design rules of this new building system .This paper presents some hits on the design rules and some applications in Turkey such as construction of a factory, construction of a three story villa and construction of mosque domes.展开更多
MgO/Al2O3 and Fe2O3/MgO/Al2O3 solid bases were prepared through mixing method. After sulfonated cobalt phthalocyanine （CoPcS） being supported on these solid bases, the catalytic performance of these catalysts was ev...MgO/Al2O3 and Fe2O3/MgO/Al2O3 solid bases were prepared through mixing method. After sulfonated cobalt phthalocyanine （CoPcS） being supported on these solid bases, the catalytic performance of these catalysts was evaluated by means of mercaptan oxidation reaction. The samples were characterized by X-ray diffraction （XRD）, CO2 temperature-programmed desorption （CO2-TPD）, FTIR spectroscopy, and X-ray photoelectron spectroscopy （XPS）. Investigation was focused on the effect of Fe2O3 on activity, crystal structure, basicity, and stability of the catalyst and also on the role of Fe2O3 in the mercaptan oxidation processes. Test results have shown that the Fe2O3/MgO/Al2O3- CoPcS catalyst has a higher initial activity and a much longer service life than the MgO/Al2O3-CoPcS catalyst. The increased types of basic sites coupled with an enhanced oxidation ability resulted from the addition of Fe2O3 have contributed to the improvement of the catalytic activity of the MgO/Al2O3-CoPcS catalyst.展开更多
基金supported by the National Key Basic Research Program of China (973 Program) under Grant No. 2011CB302605the National High Technical Research and Development Program of China (863 Program) underGrants No. 2010AA012504,No. 2011AA010705+1 种基金the National Natural Science Foundation of China under Grant No. 60903166the National Science and Technology Support Program under Grants No. 2012BAH37B00,No. 2012-BAH37B01
文摘Automatic signature generation approaches have been widely applied in recent traffic classification.However,they are not suitable for LightWeight Deep Packet Inspection(LW_DPI) since their generated signatures are matched through a search of the entire application data.On the basis of LW_DPI schemes,we present two Hierarchical Clustering(HC) algorithms:HC_TCP and HC_UDP,which can generate byte signatures from TCP and UDP packet payloads respectively.In particular,HC_TCP and HC_ UDP can extract the positions of byte signatures in packet payloads.Further,in order to deal with the case in which byte signatures cannot be derived,we develop an algorithm for generating bit signatures.Compared with the LASER algorithm and Suffix Tree(ST)-based algorithm,the proposed algorithms are better in terms of both classification accuracy and speed.Moreover,the experimental results indicate that,as long as the application-protocol header exists,it is possible to automatically derive reliable and accurate signatures combined with their positions in packet payloads.
文摘In high seismic regions of the world, including Turkey, there are too many low-rise residential buildings made of rigid masonry walls or flexible moment-resistant frames with brittle masonry partitioning walls. During even moderate earthquakes, these buildings suffer heavy damages and brittle failures causing hundreds if not thousands of people to lose their lives and homes. Hence it is essential to build a house with lightweight materials that have an earthquake resistance with a proper safety. Recently in some countries such as USA, Italy, China and Turkey; a new building system called 3D wire panel building system use prefabricated lightweight panels to construct low-rise buildings up to three stories. The panels are fabricated from polystyrene, steel, and shotcrete concrete .The lightweight of these panels, easy handling, high construction speed, good heat insulation properties, in addition to their low cost by avoiding formwork and need for skilled workers make it an acceptable construction practice. In the literature, there is no enough information on the design rules of this new building system .This paper presents some hits on the design rules and some applications in Turkey such as construction of a factory, construction of a three story villa and construction of mosque domes.
文摘MgO/Al2O3 and Fe2O3/MgO/Al2O3 solid bases were prepared through mixing method. After sulfonated cobalt phthalocyanine （CoPcS） being supported on these solid bases, the catalytic performance of these catalysts was evaluated by means of mercaptan oxidation reaction. The samples were characterized by X-ray diffraction （XRD）, CO2 temperature-programmed desorption （CO2-TPD）, FTIR spectroscopy, and X-ray photoelectron spectroscopy （XPS）. Investigation was focused on the effect of Fe2O3 on activity, crystal structure, basicity, and stability of the catalyst and also on the role of Fe2O3 in the mercaptan oxidation processes. Test results have shown that the Fe2O3/MgO/Al2O3- CoPcS catalyst has a higher initial activity and a much longer service life than the MgO/Al2O3-CoPcS catalyst. The increased types of basic sites coupled with an enhanced oxidation ability resulted from the addition of Fe2O3 have contributed to the improvement of the catalytic activity of the MgO/Al2O3-CoPcS catalyst.
