Motion control of thrust system for shield tunneling machine

The thrust hydraulic system of the prototype shield machine with pressure and flow compound control scheme was introduced. The experimental system integrated with proportional valves for study was designed. Dynamics modeling of multi-cylinder thrust system and synchronous control design were accomplished. The simulation of the synchronization motion control system was completed in AMESim and Matlab/Simulink software environments. The experiment was conducted by means of master/slave PID with dead band compensating flow and conventional PID regulating pressure. The experimental results show that the proposed thrust hydraulic system and its control strategy can meet the requirements of tunneling in motion and posture control for the shield machine, keeping the non-synchronous error within ±3 mm.

Evaluation of flow behavior in copper electro-refining cell with different inlet arrangements

The arrangement of electrolyte inlet in the copper electro-refining(ER)cell has a great influence on the local flow field,which affects the distribution of electrical current density in consequence.In order to understand the complicated phenomena ofelectrolyte flow behavior in vertical counter electrodes in full-scale copper ER cell,the three-dimensional computational fluiddynamics(CFD)models with four different arrangements of electrolyte inlets,i.e.,single inlet(SI),central bottom inlets(CBI),topside interlaced inlets(TII),and bottom side interlaced inlets(BII),were established to simulate the flow behavior.Simulation resultshave revealed that the parallel injection devices help to improve the electrolyte velocity between electrodes,and while the relativerange of electrolyte velocity in CBI exceeds that of TII and BII,which is more than4times,indicating its severer unequal flowdistribution.Meanwhile,the average velocity of electrolyte in BII is4times larger than that of SI due to its higher turbulenceintensity.Generally,one of the efficient ways to supply fresh copper solution rapidly and uniformly into the inter-electrode space is toadapt the arrangement of BII.By utilizing such an arrangement,the electro-refining under high electrical current density is possible,and the productivity can be increased in sequence.

Effects of reaction parameters on preparation of Cu nanoparticles via aqueous solution reduction method with NaBH_4

The preparation of Cu nanoparticles by the aqueous solution reduction method was investigated. The effects of different reaction parameters on the preparation of Cu nanoparticles were studied. The optimum conditions for preparing well-dispersed nanoparticles were found as follows: 0.4 mol/L NaBH4 was added into solution containing 0.2 mol/L Cu2+, 1.0% gelatin dispersant in mass fraction, and 1.2 mol/L NH3?H2O at pH 12 and 313 K. In addition, a series of experiments were performed to discover the reaction process. NH3?H2O was found to be able to modulate the reaction process. At pH=10, Cu2+ was transformed to Cu(NH3)42+ as precursor after the addition of NH3?H2O, and then Cu(NH3)42+ was reduced by NaBH4 solution. At pH=12, Cu2+ was transformed to Cu(OH)2 as precursor after the addition of NH3?H2O, and Cu(OH)2 was then reduced by NaBH4 solution.

Ionic Liquids: Progress and Prospective

Ionic liquids （ILs） are green solvents that have attracted great attention in recent years due to their unique properties. In this paper the latest progresses in both the fundamental studies and applications of ILs have been summarized, with the emphasis on the topics of physical properties, catalytic reactions, and biochemical engineering. The critical problems in the applications of the ILs have been addresses, and the prospective of the ILs were finally predicted.

Detection of metastatic cancer cells in mesentery of colorectal cancer patients

AIM To detect the existence of isolated cancer cells in the mesentery of colorectum(named as Metastasis V), and investigate its clinical significance in colorectal cancer(CRC) patients.METHODS Sixty-three CRC patients who received radical excision between January 2012 and September 2015 were included. All the patients underwent laparoscopyassisted radical colorectomy or proctectomy [with complete mesocolic excision(CME) or total mesorectal excision(TME)] with R0 dissections at the Department of Gastrointestinal Surgery, Tongji Hospital, Tongji Medical College, Huazhong University of Science and Technology. The location and size of the primary lesions were recorded immediately after the tumor was removed, with the surrounding mesenterium completely separated along the intestinal wall. Each dissected mesentery sample was analyzed for hematoxylin-eosin staining and immunohistochemistry using cytokeratin 19 antibody. Image Pro Plus Software 6.0(Media Cybernetics, CA, United States) was usedto semi-quantitatively measure the concentration of the cytokeratin 19 immunohistochemistry. The correlation between metastasis found in mesentery and clinicopathological characteristics was examined. The prognosis of patients was also evaluated by preoperative serum CEA level.RESULTS Metastasis V was detected in 14 of 63(22.2%) CRC patients who underwent laparoscopy-assisted radical colorectomy or proctectomy(with CME or TME) with R0 dissection in our hospital between January 2012 and September 2015. There was no significant difference in age, gender, tumor size, and tumor location in patients with Metastasis V(P > 0.05). Metastasis V was more likely to occur in poorly differentiated tumor(5/11; 45.5%) than moderately(8/46; 17.4%) and welldifferentiated one(1/6; 16.7%). The Metastasis V in N2 stage(9/14; 64.3%) was more frequent that in the N0 stage(3/35; 8.6%) or N1 stages(2/14; 14.3%). In addition, Metastasis V was positively related to the tumor invasive depth(T1:0/1, 0%; T2:1/12, 8.3%; T3:7/39, 17.9%; T4:6/11, 54.5%). Furthermore, preoperative serum CEA level in Metastasis V-positive patients was significantly higher than in Metastasis V-negative patients(4.27 ng/m L vs 3.00 ng/m L).CONCLUSION Metastasis V might be associated with a poor prognosis of CRC patients.

Enrichment of Semi-Volatile Organic Acids from Aqueous Solutions by Multiple-Effect Membrane Distillation

Multiple-effect membrane distillation （MEMD） process for enriching semi-volatile organic acids from their individual aqueous solutions was performed by using a hollow fiber-based air gap membrane distillation （AGMD） module with the function of internal heat recovery. Aqueous solutions of glyoxylic acid, glycolic acid, lactic acid, pyrnvic acid, malonic acid and glutaric acid were used as model feed. For a feed of 1% （mass fraction）, each acid could be enriched for 8--20 times, which depended on the surface tension of the concentrate. The operation performance of MEMD process was characterized by permeation flux J, performance ratio PR and acid rejection rate R. The effects of cold feed-in temperature, heated feed-in temperature, feed-in volumetric flow rate and feed-in concen- tration on MEMD performance were experimentally evaluated. Maximum values of J, PR and R were 4.8 L/（h-m2）, 9.84 and 99.93%, respectively. Moreover, MEMD process demonstrated a fairly good stability in a long-term experiment lasting for 30 d when aqueous solution of 4% （mass fraction） lactic acid was used as a feed.

Measurement and correlation of solid–liquid phase equilibria for binary and ternary systems consisting of N-vinylpyrrolidone, 2-pyrrolidone and water

The solid–liquid equilibria(SLE)for binary and ternary systems consisting of N-Vinylpyrrolidone(NVP),2-Pyrrolidone(2-P)and water are measured.The phase diagrams of NVP(1)+2-P(2),NVP(1)+water(2),NVP(1)+2-P(2)+1 wt%water(3)and NVP(1)+2-P(2)+2 wt%water(3)are identified as simple eutectic type with the eutectic points at 263.75 K(x_(1E)=0.5427),251.65 K(x_(1E)=0.3722),260.25 K(x_(1E)=0.5031)and256.55 K(x_(1E)=0.4684),respectively.The phase diagram of 2-P(1)+water(2)has two eutectic points(x_(1E)=0.1236,T_E=259.15 K and x_(1E)=0.7831,T_E=286.15 K)and one congruent melting point(x_(1C)=0.4997,T_C=303.55 K)because of the generation of a congruently melting addition compound:2-P·H_2O.The ideal solubility and the UNIFAC models were applied to predict the SLE,while the Wilson and NRTL models were employed in correlating the experimental data.The best correlation of the SLE data has been obtained by the Wilson model for the binary system of NVP+2-P.The UNIFAC model gives more satisfactory predictions than the ideal solubility model.

Oil Import and Export in China

Domestic economic growth slowed down and supply exceeded demand in oil market in 2015, so the growth of refineries＂ processing volume was limited. Nevertheless, the gradual decontrol of market and the storage requirement under low oil price, crude oil imports hit a record high of 335.5 million tons, with the growth rate approximating 9%. Refined oil exports soared and imports decreased, which made China become a net refined oil exporter for the first time for 24 years, and net imports reached 6.22 million tons. Robust requirement on chemical raw materials propelled imported liquefied petroleum gas market to go on expanding. Imports exceeded 12 ,zillion tons in 2015, thus China leaped into the world＇s largest liquefied petroleum gas importer. In 2016, oil consumption growth would be kept at lower level. However, China would further decontrol crude oil import and refined oil export permits and put incremental storage capacity, into use. Therefore, crude oil imports would continue to rise up, and refined oil exports may hit a new historic high. hnported liquefied petroleum gas market will enter into a stage of stable growth after two years rapid development.

Determination of Hg in soil by ultrasonic slurry sampling hydride generation atomic fluorescence spectrometry

Ultrasonic aided slurry sampling hydride generation atomic fluorescence spectrometry （USS-HG-AFS） was developed for the determination of Hg in soil samples from a sewage-irrigated farm. 500 mg grounded soil was suspended in agar solution by an ultrasound water bath before the HG-AFS determination. The results for the reference material of soil （serial number GBW-07411） agreed satisfactorily with the certified values. Results obtained by the developed procedure compared well with those after traditional acid digestion of samples. The detection limit are 6.7ngL-1 for Hg respectively, with average relative standard deviation values of 6.4% for analysis of a series of soil samples of different origin. The recoveries of the anatytes varied in the range from 95 to 107%. This observation has stimulated interest in fast, accurate and sensitive analytical methods for determination of metals in soil.

Simplified Wave Models Applicability to Shallow Mud Flows Modeled as Power-Law Fluids

Simplified wave models- such as kinematic,diffusion and quasi-steady- are widely employed as a convenient replacement of the full dynamic one in the analysis of unsteady open-channel flows,and especially for flood routing.While their use may guarantee a significant reduction of the computational effort,it is mandatory to define the conditions in which they may be confidently applied.The present paper investigates the applicability conditions of the kinematic,diffusion and quasisteady dynamic shallow wave models for mud flows of power-law fluids.The power-law model describes in an adequate and convenient way fluids that at low shear rates fluids do not posses yield stress,such as clay or kaolin suspensions,which are frequently encountered in Chinese rivers.In the framework of a linear analysis,the propagation characteristics of a periodic perturbation of an initial steady uniform flow predicted by the simplified models are compared with those of the full dynamic one.Based on this comparison,applicability criteria for the different wave approximations for mud flood of power-law fluids are derived.The presented results provide guidelines for selecting the appropriate approximation for a given flow problem,and therefore they may represent a useful tool for engineering predictions.

Influence of temperature on mechanical stimulation threshold of typical liquid propellant

In order to study the variation of temperature to mechanical stimulation threshold of typical liquid propellants(ADN-based HAN-based and nitromethane),the critical impact energy and critical friction of three propellants under different temperatures were studied by using BAM fall hammer impact sensitivity tester and BAM friction sensitivity tester.Experiments show that under 80℃,60℃,40℃and 20℃,the critical impact energy of HAN-based are 20 J,15 J,15 J,15 J;the critical impact energy of nitromethane are 2 J,2 J,2 J,2 J;and the critical impact energy of ADN-based are<1 J,3 J,7.5 J,15 J.It reveals that HAN-based propellant has the highest critical impact energy,while nitromethane propellant has the lowest critical impact energy.ADN-based propellant has a notable decrease on its critical impact energy with temperature decreasing,indicating that temperature has a significant effect on impact sensitivity of ADN-based propellant.The critical friction of three samples are all higher than 360 N at 80℃,60℃,40℃and 20℃,which shows that the samples are not sensitive to friction,and temperature has no significant effect on the critical friction of three samples.The mechanical stimulations that may be encountered during the production and use of liquid propellants are analyzed,which takes certain working conditions and the temperature coupling effect into consideration,thereby providing support for safety management of liquid propellants during production and storage process.

Fault diagnosis of rocket engine ground testing bed with self-organizing maps(SOMs)

To solve the fault diagnosis problem of liquid propellant rocket engine ground testing bed,a fault diagnosis approach based on self-organizing map(SOM)is proposed.The SOM projects the multidimensional ground testing bed data into a two-dimensional map.Visualization of the SOM is used to cluster the ground testing bed data.The out map of the SOM is divided to several regions.Each region is represented for one fault mode.The fault mode of testing data is determined according to the region of their labels belonged to.The method is evaluated using the testing data of a liquid-propellant rocket engine ground testing bed with sixteen fault states.The results show that it is a reliable and effective method for fault diagnosis with good visualization property.

Experimental Study of Double Diffusion in Binary Solution

Application of temperature gradient to a binary solution can work as a separation process like freezing desalination. Initial salinity is an important parameter on the final composition of the water obtained. In this paper, the authors study experimentally the effect of the concentration in aqueous solution on the double diffusion with phase change. NaCI-H20 solution at different salinity is frozen in a rectangular cavity to obtain ice becoming fresh water. Temperature, concentration and rate growth of the interface ice/brine are presented. Three concentrations are tested： 0.02%, 1% and 3.5%.

Effect of water on extractive desulfurization of fuel oils using ionic liquids： A COSMO-RS and experimental study

When evaluating ionic liquids （ILs） for extractive desulfurization （EDS） of fuel oils, the inevitable presence of water in the system may have a significant and in many cases strongly negative effect. However, few studies have considered this particular issue and a promoted water effect on EDS is scarcely reported. In this work, COSMO-RS was firstly employed to calculate the capacity and selectivity for EDS of various IL/H20 mixtures, which cover different IL characters and a wide water concentration range. Experiments were then conducted with a representative IL [C4MIM]IH2P04], whose stable and even promoted extraction performance with a small amount of water was suggested by COSMO-RS. Through analyses of the desulfurization ratio, the cross- solubility and the water content in the desulfurized fuel, the promoted effect of water within a certain range （〈 10 wt%） was experimentally demonstrated. Moreover, such effect of water was explained combining the viscosity, the solvent-solute interactions and the COSMO-RS based analysis.

Trace element composition of magnetite from the Xinqiao Fe–S(–Cu–Au) deposit, Tongling, Eastern China: constraints on fluid evolution and ore genesis

The Xinqiao deposit is one of several polymetallic deposits in the Tongling ore district. There are two types of mineralization in the Xinqiao： skarn-type and stratiform-type. The skarn-type mineralization is characterized by iron oxides such as magnetite and hematite, whereas stratiform-type mineralization is characterized by massive sulfides with small amounts of magnetite and hematite. We defined three types of ores within the strati- form-type mineralization by the mineral assemblages and ore structures. Type Ⅰ ore is represented by magnetite crosscut by minor calcite veins. Type Ⅱ is a network ore composed of magnetite and crosscutting pyrite. Type Ⅲ is a massive ore containing calcite and hematite. Type Ⅰ magnetite is characterized by highly variable trace element content, whereas Type Ⅱ magnetite has consistently higher Si, Ti, V, and Nb. Type Ⅲ magnetite contains more In, Sn, and As than the other two types. Fluid-rock interaction, oxygen fugacity （fO2）, and temperature （T） are the main factors controlling element variation between the different magnetite types. Type I magnetite was formed by more extensive fluid-rock interaction than the other two types at moderate fO2 and T conditions. Type Ⅱ magnetite is thought to have formed in relatively low fO2 and high-Tenvironments, and Type Ⅲ in relatively high fOe and moderate-T environments. Ca ＋ Al ＋ Mn and Ti ＋ V discrimination diagrams show that magnetite in the Xin qiao deposit is hydrothermal in origin and is possibly linked with skarn.

Effect of Using Baker＇s Yeast and Exogenous Digestive Enzymes as Growth Promoters on Growth, Feed Utilization and Hematological Indices of Nile tilapia, Oreochromis niloticus Fingerlings

The present study was conducted to evaluate the effect of baker yeast, Saccharomyces cerevisiae （SC） and exogenous digestive enzymes （pepsin, papain and a-amylase, EDE） dietary supplementation on growth performance, feed utilization and hematological indices of Nile tilapia, Oreochromis niloticus fingerlings. A total of 630 Nile tilapia fingerlings with an average body weight of 26.4 ± 0.2 g were divided in the seven experimental net-pen treatments （three replicates each）. The experiment was conducted for 119 days. Seven isonitrogenous （26.50%） digestible protein and isocaloric （13.40 MJ kgl） digestible energy experimental diets were formulated. The control diet had no SC and EDE added. Diets 2-3 each contained SC at levels of 2 and 4 g 100 g diet-t, respectively, while diets 4-5 each contained EDE at levels of （0.64, 1.28, 0.16） and （1.28, 2.56, 0.32） g 100 gdiefI of pepsin, papain and a-amylase, respectively. Diet 6 contained mixture of SC and EDE at levels of 1 g yeast and 0.32, 0.64, 0.08 g of pepsin, papain and a-amylase, respectively 100 gdiet1 and diet D7 contained 2 g yeast and 0.64, 1.28, 0.16 g of pepsin, papain and a-amylase, respectively 100 g dietl. Growth performance and feed utilization efficiency of Nile tilapia were significantly （P 〈 0.05） higher in all treatments receiving SC and/or EDE supplemented-diets than the control diet which suggests that the addition of SC and EDE enhanced the growth performance. Red blood cells counts, hematocrit and hemoglobin were significantly （P 〈 0.05） highest in all treatments receiving mixture of SC and EDE supplemented-diets （D6 ＋ D7）. The same trend was observed for total plasma protein and total plasma globulin levels. The results of present study suggested that Nile tilapia fingerlings fed diets containing the mixture of I g yeast, SC and 0.32, 0.64, 0.08 g of pepsin, papain and a-amylase, respectively 100 gdiet^-1, for 119 days had enhanced growth performance, diet utilization efficiency and hematological indices.

A new adding method of foaming agent used for foam dust suppression in underground coal mines

To realize a stable addition of foaming agent used for foam technology, a new adding method using the jet cavitation was introduced, and its performance was investigated experimentally under different operating conditions. Experimental results show that the bubble region in the jet device has a constant vapor pressure, which creates a good condition for liquid absorption, while it shrinks with increasing outlet pressure. The liquid absorption amount keeps unchanged when the outlet pressure is lower than a critical value. The critical outlet pressure increases by 40% with decreasing cavitation absorption amount, which is especially suitable for mini-flow quantitative addition of foaming agent used for foam dust suppression. Its effectiveness on suppressing mine dust was evaluated in a heading face of underground coal mines. Field application indicates that the reliable and simple foaming system adopting the new adding method makes a marked dust suppression effect. The working environment of heading face is significantly improved, ensuring the safe tunneling and personal security.

Phenolic Antioxidants in Cypriot Wines as a Tool for Their Varietal Discrimination： Preliminary Results

A total of 56 wines from different vintages and wine-growing regions of Cyprus were used to analyze six biologically interesting phenolic antioxidants （gallic acid, catechin, vanillic acid, epicatechin, coumaric and feroulic acid） by high performance liquid chromatography. The study includes red and white Cypriot authentic wines from local and imported varieties that were produced under the same vinification conditions at a Model Winery. Results extracted after the chemometric analysis of the measured concentrations show a strong relationship of the phenolic antioxidative capacity with the variety of the wines and gallic acid followed by vanillic acid found in the highest concentrations of the other antioxidants studied. Comparing the concentrations found with bibliographic data for wines from other countries, it was found that, the concentration levels of vanillic and ferulic acid were significantly higher for Cypriot wines.

Mixing Characteristics of Pulsed Air-assist Liquid Jet into an Internal Subsonic Cross-flow

Penetration depth,spray dispersion angle,droplet sizes in breakup processes and atomization processes are very important parameters in combustor of air-breathing engine.These processes will enhance air/fuel mixing inside the combustor.Experimental results from the pulsed air-assist liquid jet injected into a cross-flow are investigated.And experiments were conducted to a range of cross-flow velocities from 42～136 m/s.Air is injected with 0～300kPa,with air-assist pulsation frequency of 0～20Hz.Pulsation frequency was modulated by solenoid valve.Phase Doppler Particle Analyzer(PDPA) was utilized to quantitatively measuring droplet characteristics.High-speed CCD camera was used to obtain injected spray structure.Pulsed air-assist liquid jet will offer rapid mixing and good liquid jet penetration.Air-assist makes a very fine droplet which generated mist-like spray.Pulsed air-assist liquid jet will introduce additional supplementary turbulent mixing and control of penetration depth into a cross-flow field.The results show that pulsation frequency has an effect on penetration,transverse velocities and droplet sizes.The experimental data generated in these studies are used for a development of active control strategies to optimize the liquid jet penetration in subsonic cross-flow conditions and predict combustion low frequency instability.