Numerous studies evaluated the effects of end-of-pipe control environmental regulations(EER).However,few scholars discussed the effects of process management environmental regulations(PER),such as the China Cleaner Pr...Numerous studies evaluated the effects of end-of-pipe control environmental regulations(EER).However,few scholars discussed the effects of process management environmental regulations(PER),such as the China Cleaner Production Standards(CCPS)implemented by the country's Ministry of Ecology and Environment.Using data on China's manufacturing enterprises,this paper adopts the CCPS policies as quasi-natural experiments and uses differences-in-differences(DID)methods to analyze their effects on enterprise profitability and profit quality,respectively.The results show that:first,the CCPS significantly improve both profitability and profit quality;that is,the implementation of the environmental regulation policy plays a significant role in improving enterprise profit rates and cash flows.Second,for the profitability mediator effects,the short-term Porter effect of CCPS is not significant but shows the opposite during the lag period and significantly reduces the management cost and wage levels,comprehensively promoting enterprise profitability.Third,for the profit quality meditator effects,environmental regulations improve the enterprises'cash flow by reducing management costs and increasing government subsidies;however,its effect on bank credit subsidies is not significant.Fourth,for the moderator effects,the environmental regulations'effect on enterprises profitability and profit quality depends on the strategic interaction among local governments,the scale and ownership of the enterprise,and regional differences.That is,the strategic interaction weakens the effect of environmental regulations on enterprise performance.Environmental regulations have a stronger influence on profitability and profit quality for large-scale,state-owned,and coastal enterprises.展开更多
Acid production with flue gas is a complex nonlinear process with multiple variables and strong coupling.The operation data is an important basis for state monitoring,optimal control,and fault diagnosis.However,the op...Acid production with flue gas is a complex nonlinear process with multiple variables and strong coupling.The operation data is an important basis for state monitoring,optimal control,and fault diagnosis.However,the operating environment of acid production with flue gas is complex and there is much equipment.The data obtained by the detection equipment is seriously polluted and prone to abnormal phenomena such as data loss and outliers.Therefore,to solve the problem of abnormal data in the process of acid production with flue gas,a data cleaning method based on improved random forest is proposed.Firstly,an outlier data recognition model based on isolation forest is designed to identify and eliminate the outliers in the dataset.Secondly,an improved random forest regression model is established.Genetic algorithm is used to optimize the hyperparameters of the random forest regression model.Then the optimal parameter combination is found in the search space and the trend of data is predicted.Finally,the improved random forest data cleaning method is used to compensate for the missing data after eliminating abnormal data and the data cleaning is realized.Results show that the proposed method can accurately eliminate and compensate for the abnormal data in the process of acid production with flue gas.The method improves the accuracy of compensation for missing data.With the data after cleaning,a more accurate model can be established,which is significant to the subsequent temperature control.The conversion rate of SO_(2) can be further improved,thereby improving the yield of sulfuric acid and economic benefits.展开更多
[Objectives]Some Chinese medicinal materials of Jianjin Zhuanggu Paste were microscopically identified,and several active ingredients were studied by thin-layer identification,which provides reference for further impr...[Objectives]Some Chinese medicinal materials of Jianjin Zhuanggu Paste were microscopically identified,and several active ingredients were studied by thin-layer identification,which provides reference for further improving the quality standards of hospital preparations.[Methods]The effective components of Jianjin Zhuanggu Paste were qualitatively identified by thin-layer chromatography(TLC).[Results]The microscopic identification of the three Chinese medicinal materials in Jianjin Zhuanggu Paste showed the microscopic characteristics of Radix Codonopsis,Radix Astragali and Radix Notoginseng.TLC identification showed that there were characteristic spots of Radix Codonopsis,Radix Astragali,Radix Rehmanniae Preparata and Radix Notoginseng in Jianjin Zhuanggu Paste.[Conclusions]This study established the quality standard research method of Jianjin Zhuanggu Paste,which further strengthens the safety standards of hospital preparations,and improves the clinical efficacy of drugs,as well as the quality standards of hospital preparations to a certain extent.展开更多
According to the Annex Technical Regulations for Integrated Curriculum Development(Trial)in Document No.30 of the General Office of the Ministry of Human Resources and Social Security(2012),this paper studies the form...According to the Annex Technical Regulations for Integrated Curriculum Development(Trial)in Document No.30 of the General Office of the Ministry of Human Resources and Social Security(2012),this paper studies the formulation of the curriculum standards for the integration of Chinese medicinal materials production.We focus on the formulation ideas of the curriculum standards for the integration of Chinese medicinal materials production,the formulation process of the curriculum standards for the integration of Chinese medicinal materials production,including the description of typical work tasks,the determination of curriculum objectives,the analysis of study content,the description of referential study tasks,teaching implementation suggestions,assessment and evaluation suggestions,which can provide a reference for the development and research of other related integrated courses.展开更多
With the progress of science and technology and the acceleration of industrialization,the modern industrial park is an important carrier of industrial development.The importance of its standard plant design has become...With the progress of science and technology and the acceleration of industrialization,the modern industrial park is an important carrier of industrial development.The importance of its standard plant design has become increasingly prominent.With the development of new quality productive forces as the background,this research deeply discusses the key points of standard plant design in modern industrial parks.This paper uses literature review and case analysis to systematically analyze the important role of standard plant design in developing new quality productive forces in modern industrial parks and puts forward suggestions for optimizing design.It is found that the rationality,intelligence,and environmental protection of plant design are the key factors affecting the development of new quality productive forces.The paper summarizes the core points of modern industrial park standard plant design to provide a reference for the future development of related industries.展开更多
Separated preparation of prealloys and amorphous alloys results in severe solidification-remelting and beneficial element removal-readdition contradictions,which markedly increase energy consumption and emissions.This...Separated preparation of prealloys and amorphous alloys results in severe solidification-remelting and beneficial element removal-readdition contradictions,which markedly increase energy consumption and emissions.This study offered a novel strategy for the direct production of FePC amorphous soft magnetic alloys via smelting reduction of high-phosphorus iron ore(HPIO)and apatite.First,the thermodynamic conditions and equilibrium states of the carbothermal reduction reactions in HPIO were calculated,and the element content in reduced alloys was theoretically determined.The phase and structural evolutions,as well as element migration and enrichment behaviors during the smelting reduction of HPIO and Ca_(3)(PO_(4))_(2),were then experimentally verified.The addition of Ca_(3)(PO_(4))_(2)in HPIO contributes to the enrichment of the P element in reduced alloys and the subsequent development of Fe_(3)P and Fe_(2)P phases.The content of P and C elements in the range of 1.52 wt% -14.63 wt% and 0.62 wt% -2.47 wt%,respectively,can be well tailored by adding 0-50 g Ca_(3)(PO_(4))_(2)and controlling the C/O mole ratio of 0.8-1.1,which is highly consistent with the calculated results.These FePC alloys were then successfully formed into amorphous ribbons and rods.The energy consumption of the proposed strategy was estimated to be 2.00×10^(8) kJ/t,which is reduced by 30% when compared with the conventional production process.These results are critical for the comprehensive utilization of mineral resources and pave the way for the clean production of Fe-based amorphous soft magnetic alloys.展开更多
China is the biggest country of rice production and consumption in the world;more than 50% of the population feeds chiefly on rice. The quality of rice and its role as a staplefood carry much weight. The rice qualitie...China is the biggest country of rice production and consumption in the world;more than 50% of the population feeds chiefly on rice. The quality of rice and its role as a staplefood carry much weight. The rice qualities are those aspects concerning processing, appearance,cooking, nutrition and safety of the product. The study, formulation and implementation of standardson rice qualities and testing bear heavily on the improving of rice qualities, human health,substitution of rice varieties, promoting quality rice production and regulating rice market.展开更多
The establishment of agricultural products quality and safety cooperation mechanism and the research demonstration center in the Asia-Pacific reg coordinating each other, is not only of great ening cooperation with co...The establishment of agricultural products quality and safety cooperation mechanism and the research demonstration center in the Asia-Pacific reg coordinating each other, is not only of great ening cooperation with countries in Asia-Pacific region and for agricultural production safety of those countries in Asia- Pacific region, but also very necessary for our country to build a responsible image in the quality and safety of agricultural products, protection of the benefit of agriculture-related enterprises, increasing exports, ensuring imported food safety and China's national food security, as Well as nice exploration of establishing the global agricultural' products quality and safety cooperation center.展开更多
The research reviewed standardized production technology of virus-free seed potato, including stem tip isolation, tissue culture seedling production, breeder's seed and protospecies production, and standard potato tu...The research reviewed standardized production technology of virus-free seed potato, including stem tip isolation, tissue culture seedling production, breeder's seed and protospecies production, and standard potato tubers' production, and concluded a set of standardized production technology for virus-free seed potato, in order to provide theoretical references for improving potato yield.展开更多
Facing increasingly strict environmental regulations on transportation fuels, China National Petroleum Corporation (CNPC), the second largest supplier of petroleum products in China, needs to upgrade its transportat...Facing increasingly strict environmental regulations on transportation fuels, China National Petroleum Corporation (CNPC), the second largest supplier of petroleum products in China, needs to upgrade its transportation fuels. Using the scenario-based analysis method, this paper analyzes how the output and emission related properties, including cetane number, and sulfur and aromatics contents of diesel produced by CNPC, will vary with changes in the configuration of diesel production units in the next 5-10 years. The results showed that, to upgrade its diesel, CNPC needs to adjust its diesel pool by decreasing the share of fluid catalytic cracking (FCC) diesel and increasing the shares of hydrocracking (HDC) and hydrotreating (HDT) diesel. Furthermore, to produce ultra-low-sulfur diesel, straight-run diesel as well as poor diesel blendstocks such as FCC diesel and coker diesel should be hydrotreated before being blended into finished diesel. Developing highly efficient HDC and HDT catalysts and corresponding processes is the key to CNPC economically producing more and cleaner diesel.展开更多
Facing increasingly strict environmental regulations on transportation fuels, China National Petroleum Corp. (CNPC), the second largest supplier of petroleum products in China, needs to upgrade its transportation fu...Facing increasingly strict environmental regulations on transportation fuels, China National Petroleum Corp. (CNPC), the second largest supplier of petroleum products in China, needs to upgrade its transportation fuels. Using the scenario-based analysis method, this paper analyzes how the emission related properties, including antiknock index, and sulfur, olefin, benzene and aromatics contents of gasoline produced by CNPC, vary with the change in the configuration of gasoline production units in the future 5-15 years. The results showed that for CNPC to upgrade its gasoline, the share of fluid catalytic cracking (FCC) naphtha must be reduced, but just increasing reformate or alkylate and isomerate will result in excessive increase in benzene and aromatics contents or a great loss of gasoline octane number. Therefore, CNPC should suitably control the capacity of its FCC units and increase the capacity of reformer, alkylation and isomerization units. Most importantly, CNPC should dramatically expand the capacity of its hydrotreating or non-hydrotreating gasoline upgrading units to decrease the olefin and sulfur contents in FCC gasoline that takes a dominant share of about 80% in the gasoline pool of China.展开更多
The low cost and high efficient clean steels metallur- gy has been focused much attention in China. Among the factors affecting the cleanliness and consequent quali- ty of steel products, refractories are one of the k...The low cost and high efficient clean steels metallur- gy has been focused much attention in China. Among the factors affecting the cleanliness and consequent quali- ty of steel products, refractories are one of the key fac- tors. Meanwhile the restriction of resource, energy and environment is getting stronger, thus the improvement of refractories becontes much more important. In this paper, refractories selection principle Jbr clean steel production according to their thermodynamic features was ex- plained; refractories for tundLsh and flow control in con- tinuous casting, which play important roles in prohibi- ring secondary contamination of molten steel, were intro- duced. Moreover, new development of low-carbon and carbon-free refractory materials was also described.展开更多
Phosphorus is an essential element in agricultural production and chemical industry. However, since the risk of casualties and economic loss by mining accidents, the application of clean and safe production in phospho...Phosphorus is an essential element in agricultural production and chemical industry. However, since the risk of casualties and economic loss by mining accidents, the application of clean and safe production in phosphorus mines encounters great challenges. For this purpose, a man-machine-environment system composed of evaluation indexes was established, and the grading standards of indexes were defined. Firstly, the measurements of 39 qualitative indexes were obtained through the survey data. According to the measured values of 31 quantitative indexes, the measurements of quantitative indexes were calculated by linear measurement function(LM) and other three functions. Then the singleindex measurement evaluation matrixes were established. Secondly, the entropy weight method was used to determine the weights of each index directly. The analytic hierarchy process(AHP) was also applied to calculate the weights of index and index factor hierarchies after the established hierarchical model. The weights of system hierarchies were given by the grid-based fuzzy Borda method(GFB). The comprehensive weights were determined by the combination method of AHP and GFB(CAG). Furthermore, the multi-index comprehensive measurement evaluation vectors were obtained.Thirdly, the vectors were evaluated by the credible degree recognition(CDR) and the maximum membership(TMM)criteria. Based on the above functions, methods, and criteria, 16 combination evaluation methods were recommended.Finally, the clean and safe production grade of Kaiyang phosphate mine in China was evaluated. The results show that the LM-CAG-CDR is the most reasonable method, which can not only determine the clean and safe production grade of phosphorus mines, but also improve the development level of clean and safe mining of phosphorus mines for guidance.In addition, some beneficial suggestions and measures were also proposed to advance the clean and safe production grade of Kaiyang phosphorus mine.展开更多
The paper describes the importance of clean production of steel and the relationships amongst sustaining development of steel industry, environment protection and the role of refractories in the clean production of st...The paper describes the importance of clean production of steel and the relationships amongst sustaining development of steel industry, environment protection and the role of refractories in the clean production of steel. The main achievements and main shortcomings in the clean production of China ' s steel industry have been reviewed together with the introduction of the policy supporting system and the future development of clean production in China ' s steel industry.展开更多
Based on a novel triazine compound,the properties of tanned leather and commercial feasibility in pilot scale have been investigated.Then this novel approach tanning was compared with conventional chrome tanning:in th...Based on a novel triazine compound,the properties of tanned leather and commercial feasibility in pilot scale have been investigated.Then this novel approach tanning was compared with conventional chrome tanning:in the condition of less-salt pickling and chrome free,the physicochemical properties including thermal stability and mechanical strength were analyzed.Meanwhile,the surface roughness and fiber dispersion were evaluated as well.The results show that the thermal stability and mechanical strength of the triazine compound tanned leather are similar to conventional chrome tanned leather,the fiber bundle is well-dispersed and much evener than that of chrome treating.The optimized tanning approach has obvious reduction in environmental impact and leads an excellent biodegradability of tanning liquor.In industrial application,the cost of materials and water treatment are reduced effectively.The production of chrome free leather can encourage the sustainable development of leather industry and protects ecological environment in some extent.展开更多
Clean Production is the best method for iron-steel making industry to eliminate pollution thoroughly. In order to achieve this object, smelting reduction technology should play the key role. Furthermore, process integ...Clean Production is the best method for iron-steel making industry to eliminate pollution thoroughly. In order to achieve this object, smelting reduction technology should play the key role. Furthermore, process integration method can be used to solve the problem of residual gas utilization by integrating smelting reduction process with direct reduced iron unit, gasoline, methanol or dimethyl ether synthesis unit, etc. A new smelting reduction process has been proposed which can be constructed on the present plant site. Since this process can directly treat the lump coal and iron ore fines, it reduces st6ps necessary in traditional blast furnace process and Corex smelting reduction process.展开更多
Eco-city development is a healthy process towards sustainable development, within the carrying capacity of local ecosystem through changing production mode, consumption behavior and decision instrument based on ecolog...Eco-city development is a healthy process towards sustainable development, within the carrying capacity of local ecosystem through changing production mode, consumption behavior and decision instrument based on ecological economics and system engineering. The key to its planning is an ecological integration to make trade-off between economic wealth and environmental health, between material and spiritual civilization, between natural and human eco-cybernetics. Integration, demonstration, citizens’ participation and scientists’ and technician’s catalyzing are the key instruments for the implementation of the ecocity plan. "Clean production" and "ecological industry" are key elements in comprehensive development towards an eco-city. Beyond the technical and management questions, how to interlink production, consumption and reduction at the local and regional level, the spatial and urban dimension should be considered in order to perform an integrative urban eco-space.展开更多
The Ironmaking Plant of Tangshan Iron & Steel Co.Ltd.takes clean production as its orientation. It decreases silicon to smelt through increasing the entering furnace sinter ratio,stabilizing coke quality by tackli...The Ironmaking Plant of Tangshan Iron & Steel Co.Ltd.takes clean production as its orientation. It decreases silicon to smelt through increasing the entering furnace sinter ratio,stabilizing coke quality by tackling key problems,increasing coal injection ratio,as well as keeping the blast furnace smooth running and so on.The energy consumption of sinter working procedure has been greatly reduced through optimizing the ore blender structure,enhancing the quality of fuel and flux,increasing the quicklime amount,reclaiming the remaining heat of the annulus cooling system and deepening the material layer to sinter.We have achieved the repetition economy and the secondly resource has been used synthetically with advanced producing technics.The environment around the plant has been greatly improved by preventing,monitoring and fathering the moving pollution root,at the same time,the economy and environment development in phase has been greatly accelerated.展开更多
We investigated the neutral Higgs boson pair production at the CERN Large Hadron Collider (LHC) in the SM with four families. We found that the gluon-gluon fusion mode is the most dominant one in producing neutral Hig...We investigated the neutral Higgs boson pair production at the CERN Large Hadron Collider (LHC) in the SM with four families. We found that the gluon-gluon fusion mode is the most dominant one in producing neutral Higgs boson pair at the LHC, and it can be used to probe the trilinear Higgs coupling. If the heavy quarks of the fourth generation really exist within the SM, they can manifest their effect on the cross section of the Higgs pair production process at the LHC. Our numerical results show that there will be neutral Higgs boson pair production events per year if the next generation heavy quarks really exist, while there will be only events produced per year if there are only three families in the SM.展开更多
The standardized production technical regulations of a new maize variety Jingdan No.15 are introduced from all aspects of land preparation,sowing,fertilization,intercropping,plant protection,interplanting,and harvesting.
基金This study is supported by the Dengfeng Strategy of the key discipline construction project,“Environmental Technology Economics”,at the Chinese Academy of Social Sciences[Grant number.2017-ZXKHJ]the National Social Science Fund Youth Fund Project:“Research on the effect Mechanism and Heterogeneity of Environmental Regulation on the Formation of Zombie Enterprises”[Grant number.19CJY028]+1 种基金General Project funded by the National Social Science Foundation:Economic Mechanism Analysis and Management Innovation System Study in Rural Water Environment Issues[Grant Number.10BJY064]the project funded by the Basic Business Fund of High Learning Institutions of the Central Government:Obstacles and Countermeasures to Spatial Integration of Economic Growth:with Yangtze River Economic Belt as an example[Grant number.20156322020201].
文摘Numerous studies evaluated the effects of end-of-pipe control environmental regulations(EER).However,few scholars discussed the effects of process management environmental regulations(PER),such as the China Cleaner Production Standards(CCPS)implemented by the country's Ministry of Ecology and Environment.Using data on China's manufacturing enterprises,this paper adopts the CCPS policies as quasi-natural experiments and uses differences-in-differences(DID)methods to analyze their effects on enterprise profitability and profit quality,respectively.The results show that:first,the CCPS significantly improve both profitability and profit quality;that is,the implementation of the environmental regulation policy plays a significant role in improving enterprise profit rates and cash flows.Second,for the profitability mediator effects,the short-term Porter effect of CCPS is not significant but shows the opposite during the lag period and significantly reduces the management cost and wage levels,comprehensively promoting enterprise profitability.Third,for the profit quality meditator effects,environmental regulations improve the enterprises'cash flow by reducing management costs and increasing government subsidies;however,its effect on bank credit subsidies is not significant.Fourth,for the moderator effects,the environmental regulations'effect on enterprises profitability and profit quality depends on the strategic interaction among local governments,the scale and ownership of the enterprise,and regional differences.That is,the strategic interaction weakens the effect of environmental regulations on enterprise performance.Environmental regulations have a stronger influence on profitability and profit quality for large-scale,state-owned,and coastal enterprises.
基金supported by the National Natural Science Foundation of China(61873006)Beijing Natural Science Foundation(4204087,4212040).
文摘Acid production with flue gas is a complex nonlinear process with multiple variables and strong coupling.The operation data is an important basis for state monitoring,optimal control,and fault diagnosis.However,the operating environment of acid production with flue gas is complex and there is much equipment.The data obtained by the detection equipment is seriously polluted and prone to abnormal phenomena such as data loss and outliers.Therefore,to solve the problem of abnormal data in the process of acid production with flue gas,a data cleaning method based on improved random forest is proposed.Firstly,an outlier data recognition model based on isolation forest is designed to identify and eliminate the outliers in the dataset.Secondly,an improved random forest regression model is established.Genetic algorithm is used to optimize the hyperparameters of the random forest regression model.Then the optimal parameter combination is found in the search space and the trend of data is predicted.Finally,the improved random forest data cleaning method is used to compensate for the missing data after eliminating abnormal data and the data cleaning is realized.Results show that the proposed method can accurately eliminate and compensate for the abnormal data in the process of acid production with flue gas.The method improves the accuracy of compensation for missing data.With the data after cleaning,a more accurate model can be established,which is significant to the subsequent temperature control.The conversion rate of SO_(2) can be further improved,thereby improving the yield of sulfuric acid and economic benefits.
基金Supported by The Self-financing Project of Guangxi Zhuang Autonomous Region Administration of Traditional Chinese Medicine(GZZC2020496)Wuzhou Science and Technology Planning Project(201902214)Scientific Research Project of Health Commission of Wuzhou(WZWS-Z2023036).
文摘[Objectives]Some Chinese medicinal materials of Jianjin Zhuanggu Paste were microscopically identified,and several active ingredients were studied by thin-layer identification,which provides reference for further improving the quality standards of hospital preparations.[Methods]The effective components of Jianjin Zhuanggu Paste were qualitatively identified by thin-layer chromatography(TLC).[Results]The microscopic identification of the three Chinese medicinal materials in Jianjin Zhuanggu Paste showed the microscopic characteristics of Radix Codonopsis,Radix Astragali and Radix Notoginseng.TLC identification showed that there were characteristic spots of Radix Codonopsis,Radix Astragali,Radix Rehmanniae Preparata and Radix Notoginseng in Jianjin Zhuanggu Paste.[Conclusions]This study established the quality standard research method of Jianjin Zhuanggu Paste,which further strengthens the safety standards of hospital preparations,and improves the clinical efficacy of drugs,as well as the quality standards of hospital preparations to a certain extent.
基金Supported by Scientific Research Fund Project of Yunnan Provincial Department of Education (2023J2034).
文摘According to the Annex Technical Regulations for Integrated Curriculum Development(Trial)in Document No.30 of the General Office of the Ministry of Human Resources and Social Security(2012),this paper studies the formulation of the curriculum standards for the integration of Chinese medicinal materials production.We focus on the formulation ideas of the curriculum standards for the integration of Chinese medicinal materials production,the formulation process of the curriculum standards for the integration of Chinese medicinal materials production,including the description of typical work tasks,the determination of curriculum objectives,the analysis of study content,the description of referential study tasks,teaching implementation suggestions,assessment and evaluation suggestions,which can provide a reference for the development and research of other related integrated courses.
文摘With the progress of science and technology and the acceleration of industrialization,the modern industrial park is an important carrier of industrial development.The importance of its standard plant design has become increasingly prominent.With the development of new quality productive forces as the background,this research deeply discusses the key points of standard plant design in modern industrial parks.This paper uses literature review and case analysis to systematically analyze the important role of standard plant design in developing new quality productive forces in modern industrial parks and puts forward suggestions for optimizing design.It is found that the rationality,intelligence,and environmental protection of plant design are the key factors affecting the development of new quality productive forces.The paper summarizes the core points of modern industrial park standard plant design to provide a reference for the future development of related industries.
基金financially supported by the National Natural Science Foundation of China(Nos.52174217 and 52304354)the China Postdoctoral Science Foundation(No.2020M682495)。
文摘Separated preparation of prealloys and amorphous alloys results in severe solidification-remelting and beneficial element removal-readdition contradictions,which markedly increase energy consumption and emissions.This study offered a novel strategy for the direct production of FePC amorphous soft magnetic alloys via smelting reduction of high-phosphorus iron ore(HPIO)and apatite.First,the thermodynamic conditions and equilibrium states of the carbothermal reduction reactions in HPIO were calculated,and the element content in reduced alloys was theoretically determined.The phase and structural evolutions,as well as element migration and enrichment behaviors during the smelting reduction of HPIO and Ca_(3)(PO_(4))_(2),were then experimentally verified.The addition of Ca_(3)(PO_(4))_(2)in HPIO contributes to the enrichment of the P element in reduced alloys and the subsequent development of Fe_(3)P and Fe_(2)P phases.The content of P and C elements in the range of 1.52 wt% -14.63 wt% and 0.62 wt% -2.47 wt%,respectively,can be well tailored by adding 0-50 g Ca_(3)(PO_(4))_(2)and controlling the C/O mole ratio of 0.8-1.1,which is highly consistent with the calculated results.These FePC alloys were then successfully formed into amorphous ribbons and rods.The energy consumption of the proposed strategy was estimated to be 2.00×10^(8) kJ/t,which is reduced by 30% when compared with the conventional production process.These results are critical for the comprehensive utilization of mineral resources and pave the way for the clean production of Fe-based amorphous soft magnetic alloys.
文摘China is the biggest country of rice production and consumption in the world;more than 50% of the population feeds chiefly on rice. The quality of rice and its role as a staplefood carry much weight. The rice qualities are those aspects concerning processing, appearance,cooking, nutrition and safety of the product. The study, formulation and implementation of standardson rice qualities and testing bear heavily on the improving of rice qualities, human health,substitution of rice varieties, promoting quality rice production and regulating rice market.
文摘The establishment of agricultural products quality and safety cooperation mechanism and the research demonstration center in the Asia-Pacific reg coordinating each other, is not only of great ening cooperation with countries in Asia-Pacific region and for agricultural production safety of those countries in Asia- Pacific region, but also very necessary for our country to build a responsible image in the quality and safety of agricultural products, protection of the benefit of agriculture-related enterprises, increasing exports, ensuring imported food safety and China's national food security, as Well as nice exploration of establishing the global agricultural' products quality and safety cooperation center.
基金Supported by Special Fund for Agro-scientific Research in the Public Interest(201503127)~~
文摘The research reviewed standardized production technology of virus-free seed potato, including stem tip isolation, tissue culture seedling production, breeder's seed and protospecies production, and standard potato tubers' production, and concluded a set of standardized production technology for virus-free seed potato, in order to provide theoretical references for improving potato yield.
文摘Facing increasingly strict environmental regulations on transportation fuels, China National Petroleum Corporation (CNPC), the second largest supplier of petroleum products in China, needs to upgrade its transportation fuels. Using the scenario-based analysis method, this paper analyzes how the output and emission related properties, including cetane number, and sulfur and aromatics contents of diesel produced by CNPC, will vary with changes in the configuration of diesel production units in the next 5-10 years. The results showed that, to upgrade its diesel, CNPC needs to adjust its diesel pool by decreasing the share of fluid catalytic cracking (FCC) diesel and increasing the shares of hydrocracking (HDC) and hydrotreating (HDT) diesel. Furthermore, to produce ultra-low-sulfur diesel, straight-run diesel as well as poor diesel blendstocks such as FCC diesel and coker diesel should be hydrotreated before being blended into finished diesel. Developing highly efficient HDC and HDT catalysts and corresponding processes is the key to CNPC economically producing more and cleaner diesel.
文摘Facing increasingly strict environmental regulations on transportation fuels, China National Petroleum Corp. (CNPC), the second largest supplier of petroleum products in China, needs to upgrade its transportation fuels. Using the scenario-based analysis method, this paper analyzes how the emission related properties, including antiknock index, and sulfur, olefin, benzene and aromatics contents of gasoline produced by CNPC, vary with the change in the configuration of gasoline production units in the future 5-15 years. The results showed that for CNPC to upgrade its gasoline, the share of fluid catalytic cracking (FCC) naphtha must be reduced, but just increasing reformate or alkylate and isomerate will result in excessive increase in benzene and aromatics contents or a great loss of gasoline octane number. Therefore, CNPC should suitably control the capacity of its FCC units and increase the capacity of reformer, alkylation and isomerization units. Most importantly, CNPC should dramatically expand the capacity of its hydrotreating or non-hydrotreating gasoline upgrading units to decrease the olefin and sulfur contents in FCC gasoline that takes a dominant share of about 80% in the gasoline pool of China.
文摘The low cost and high efficient clean steels metallur- gy has been focused much attention in China. Among the factors affecting the cleanliness and consequent quali- ty of steel products, refractories are one of the key fac- tors. Meanwhile the restriction of resource, energy and environment is getting stronger, thus the improvement of refractories becontes much more important. In this paper, refractories selection principle Jbr clean steel production according to their thermodynamic features was ex- plained; refractories for tundLsh and flow control in con- tinuous casting, which play important roles in prohibi- ring secondary contamination of molten steel, were intro- duced. Moreover, new development of low-carbon and carbon-free refractory materials was also described.
基金Project(51974362) supported by the National Natural Science Foundation of ChinaProject(2282020cxqd055) supported by the Fundamental Research Funds for the Central Universities,ChinaProject(2021-QYC-10050-25631) supported by the Department of Emergency Management of Hunan Province,China。
文摘Phosphorus is an essential element in agricultural production and chemical industry. However, since the risk of casualties and economic loss by mining accidents, the application of clean and safe production in phosphorus mines encounters great challenges. For this purpose, a man-machine-environment system composed of evaluation indexes was established, and the grading standards of indexes were defined. Firstly, the measurements of 39 qualitative indexes were obtained through the survey data. According to the measured values of 31 quantitative indexes, the measurements of quantitative indexes were calculated by linear measurement function(LM) and other three functions. Then the singleindex measurement evaluation matrixes were established. Secondly, the entropy weight method was used to determine the weights of each index directly. The analytic hierarchy process(AHP) was also applied to calculate the weights of index and index factor hierarchies after the established hierarchical model. The weights of system hierarchies were given by the grid-based fuzzy Borda method(GFB). The comprehensive weights were determined by the combination method of AHP and GFB(CAG). Furthermore, the multi-index comprehensive measurement evaluation vectors were obtained.Thirdly, the vectors were evaluated by the credible degree recognition(CDR) and the maximum membership(TMM)criteria. Based on the above functions, methods, and criteria, 16 combination evaluation methods were recommended.Finally, the clean and safe production grade of Kaiyang phosphate mine in China was evaluated. The results show that the LM-CAG-CDR is the most reasonable method, which can not only determine the clean and safe production grade of phosphorus mines, but also improve the development level of clean and safe mining of phosphorus mines for guidance.In addition, some beneficial suggestions and measures were also proposed to advance the clean and safe production grade of Kaiyang phosphorus mine.
文摘The paper describes the importance of clean production of steel and the relationships amongst sustaining development of steel industry, environment protection and the role of refractories in the clean production of steel. The main achievements and main shortcomings in the clean production of China ' s steel industry have been reviewed together with the introduction of the policy supporting system and the future development of clean production in China ' s steel industry.
文摘Based on a novel triazine compound,the properties of tanned leather and commercial feasibility in pilot scale have been investigated.Then this novel approach tanning was compared with conventional chrome tanning:in the condition of less-salt pickling and chrome free,the physicochemical properties including thermal stability and mechanical strength were analyzed.Meanwhile,the surface roughness and fiber dispersion were evaluated as well.The results show that the thermal stability and mechanical strength of the triazine compound tanned leather are similar to conventional chrome tanned leather,the fiber bundle is well-dispersed and much evener than that of chrome treating.The optimized tanning approach has obvious reduction in environmental impact and leads an excellent biodegradability of tanning liquor.In industrial application,the cost of materials and water treatment are reduced effectively.The production of chrome free leather can encourage the sustainable development of leather industry and protects ecological environment in some extent.
文摘Clean Production is the best method for iron-steel making industry to eliminate pollution thoroughly. In order to achieve this object, smelting reduction technology should play the key role. Furthermore, process integration method can be used to solve the problem of residual gas utilization by integrating smelting reduction process with direct reduced iron unit, gasoline, methanol or dimethyl ether synthesis unit, etc. A new smelting reduction process has been proposed which can be constructed on the present plant site. Since this process can directly treat the lump coal and iron ore fines, it reduces st6ps necessary in traditional blast furnace process and Corex smelting reduction process.
文摘Eco-city development is a healthy process towards sustainable development, within the carrying capacity of local ecosystem through changing production mode, consumption behavior and decision instrument based on ecological economics and system engineering. The key to its planning is an ecological integration to make trade-off between economic wealth and environmental health, between material and spiritual civilization, between natural and human eco-cybernetics. Integration, demonstration, citizens’ participation and scientists’ and technician’s catalyzing are the key instruments for the implementation of the ecocity plan. "Clean production" and "ecological industry" are key elements in comprehensive development towards an eco-city. Beyond the technical and management questions, how to interlink production, consumption and reduction at the local and regional level, the spatial and urban dimension should be considered in order to perform an integrative urban eco-space.
文摘The Ironmaking Plant of Tangshan Iron & Steel Co.Ltd.takes clean production as its orientation. It decreases silicon to smelt through increasing the entering furnace sinter ratio,stabilizing coke quality by tackling key problems,increasing coal injection ratio,as well as keeping the blast furnace smooth running and so on.The energy consumption of sinter working procedure has been greatly reduced through optimizing the ore blender structure,enhancing the quality of fuel and flux,increasing the quicklime amount,reclaiming the remaining heat of the annulus cooling system and deepening the material layer to sinter.We have achieved the repetition economy and the secondly resource has been used synthetically with advanced producing technics.The environment around the plant has been greatly improved by preventing,monitoring and fathering the moving pollution root,at the same time,the economy and environment development in phase has been greatly accelerated.
基金The project supported in part by National Natural Science Foundation of China
文摘We investigated the neutral Higgs boson pair production at the CERN Large Hadron Collider (LHC) in the SM with four families. We found that the gluon-gluon fusion mode is the most dominant one in producing neutral Higgs boson pair at the LHC, and it can be used to probe the trilinear Higgs coupling. If the heavy quarks of the fourth generation really exist within the SM, they can manifest their effect on the cross section of the Higgs pair production process at the LHC. Our numerical results show that there will be neutral Higgs boson pair production events per year if the next generation heavy quarks really exist, while there will be only events produced per year if there are only three families in the SM.
基金Supported by Special Funds for China Agriculture Research System(CARS-02)National Key Research and Development Plan(2018YFD0100103-2)。
文摘The standardized production technical regulations of a new maize variety Jingdan No.15 are introduced from all aspects of land preparation,sowing,fertilization,intercropping,plant protection,interplanting,and harvesting.