An aqueous BiI_(3)-Zn battery with dual mechanisms of Zn^(2+)(de)intercalation and I^(-)/I_(2)redox

The development of aqueous battery with dual mechanisms is now arousing more and more interest.The dual mechanisms of Zn^(2+)(de)intercalation and I^(-)/I_(2)redox bring unexpected effects.Herein,differing from previous studies using Zn I_(2)additive,this work designs an aqueous Bi I_(3)-Zn battery with selfsupplied I^(-).Ex situ tests reveal the conversion of Bi I_(3)into Bi(discharge)and Bi OI(charge)at the 1st cycle and the dissolved I^(-)in electrolyte.The active I^(-)species enhances the specific capacity and discharge medium voltage of electrode as well as improves the generation of Zn dendrite and by-product.Furthermore,the porous hard carbon is introduced to enhance the electronic/ionic conductivity and adsorb iodine species,proven by experimental and theoretical studies.Accordingly,the well-designed Bi I_(3)-Zn battery delivers a high reversible capacity of 182 m A h g^(-1)at 0.2 A g^(-1),an excellent rate capability with 88 m A h g^(-1)at 10 A g^(-1),and an impressive cyclability with 63%capacity retention over 20 K cycles at 10 A g^(-1).An excellent electrochemical performance is obtained even at a high mass loading of 6 mg cm^(-2).Moreover,a flexible quasi-solid-state Bi I_(3)-Zn battery exhibits satisfactory battery performances.This work provides a new idea for designing high-performance aqueous battery with dual mechanisms.

The mechanisms of thermal solidification agent promoting steam diversion in heavy oil reservoirs

At high cycles of steam huff&puff,oil distribution in reservoirs becomes stronger heterogeneity due to steam channeling.Thermal solidification agent can be used to solve this problem.Its solution is a lowviscosity liquid at normal temperature,but it can be solidified above 80℃.The plugging degree is up to 99%at 250℃.The sweep efficiency reaches 59.2%,which is 7.3%higher than pure steam injection.In addition,simultaneous injection of viscosity reducer and/or nitrogen foams can further enhance oil recovery.The mechanism of this technology depends on its strong plugging ability,which changes the flowing pattern of steam to effectively mobilize remaining oil.Viscosity reducer and nitrogen foams further expand the sweep range and extends the effective period.Therefore,thermal solidification agent can plug steam channeling paths and adjust steam flowing direction to significantly enhance oil recovery at high cycles of steam huff&puff.

Designing cost-effective network-on-chip by dual-channel access mechanism

A dual-channel access mechanism to overcome the drawback of traditional single-channel access mechanism for network-on-chip （NoC） is proposed. In traditional single-channel access mechanism, every Internet protocol （IP） has only one chan- nel to access the on-chip network. When the network is relatively idle, the injection rate is too small to make good use of the network resource. When the network is relatively busy, the ejection rate is so small that the packets in the network cannot leave immediately, and thus the probability of congestion is increased. In the dual-channel access mechanism, the injection rate of IP and the ejection rate of the network are increased by using two optional channels in network interface （NI） and local port of routers. Therefore, the communication performance is improved. Experimental results show that compared with traditional single-channel access mechanism, the proposed scheme greatly increases the throughput and cuts down the average latency with reasonable area increase.

Sinusoidal FM Fuze's Channel Leak and Its Jamming Mechanism

Aim To get the theory base of designing FM fuze's jamming signal, its jamming mechanism was studied. Methods A sinusoidal FM fuze was analyzed in time domain and frequency domain and the concept of channel leak was presented. Results It was proved that information channel leak exists in FM fuze because of the nonlinear property of the mixer. The jamming signal was designed based on the channel leak and the jamming mechanism was analyzed in detail. Conclusion This kind of jamming signal can jam the sinusoidal FM fuzes effectively just depending on the jamming signal's feature itself. It's different from the traditional jamming way of simulating echo. Though the sinusoidal FM fuze was just analyzed, the principle is applicable to all FM fuzes. At the same time, it may be used as the reference for FM radar and communication countermeasures.

Simple shear extrusion versus equal channel angular pressing:A comparative study on the microstructure and mechanical properties of an Mg alloy

Two severe plastic deformation(SPD)techniques of simple shear extrusion(SSE)and equal channel angular pressing(ECAP)were employed to process an extruded Mg-6Gd-3Y-1.5Ag(wt%)alloy at 553 K for 1,2,4 and 6 passes.The microstructural evolutions were studied by electron back scattered diffraction(EBSD)analysis and transmission electron microscopy(TEM).The initial grain size of 7.5μm in the extruded alloy was reduced to about 1.3μm after 6 SPD passes.Discontinuous dynamic recrystallization was suggested to be operative in both SSE and ECAP,with also a potential contribution of continuous dynamic recrystallization at the early stages of deformation.The difference in the shear strain paths of the two SPD techniques caused different progression rate of dynamic recrystallization(DRX),so that the alloys processed by ECAP exhibited higher fractions of recrystallization and high angle grain boundaries(HAGBs).It was revealed that crystallographic texture was also significantly influenced by the difference in the strain paths of the two SPD methods,where dissimilar basal plane texture components were obtained.The compression tests,performed along extrusion direction(ED),indicated that the compressive yield stress(CYS)and ultimate compressive strength(UCS)of the alloys after both SEE and ECAP augmented continuously by increasing the number of passes.ECAP-processed alloys had lower values of CYS and UCS compared to their counterparts processed by SSE.This difference in the mechanical responses was attributed to the different configurations of basal planes with respect to the loading direction(ED)of each SPD technique.

Fiber cladding dual channel surface plasmon resonance sensor based on S-type fiber

Fiber cladding surface plasmon resonance(SPR)sensors have few structures,and a clad SPR sensor based on S-type fiber is proposed in this paper.This new type of fiber cladding SPR sensor was formed by electrofusing an S-shaped structure on the fiber to couple the light in the fiber core to the cladding.In this paper,the effects of fiber parameters on the performance of the sensor were studied by simulation and experiment.Based on the conclusion that the smaller the core diameter is,the closer the working band of the SPR resonance is to long wavelengths,and that the geometric characteristics mean that a multimode fiber can receive the fiber cladding light from a small core diameter few-mode fiber,a dual channel SPR sensor with a double S-type fiber cascade was proposed.In the refractive index detection range of 1.333–1.385refractive index units(RIU),the resonant working band of channel I is 627.66 nm–759.78 nm,with an average sensitivity of 2540.77 nm/RIU,and the resonant working band of channel II is 518.24 nm–658.2 nm,with an average sensitivity of2691.54 nm/RIU.The processing method for the S-type fiber cladding SPR sensor is simple,effectively solving the problem of this type of SPR sensor structure and the difficult realization of a dual channel.The sensor is expected to be used in the fields of medical treatment and biological analysis.

Hybrid Channel Access Mechanism Based on Coexistence Scenario of NR-Unlicensed

With the rapid development of 5G NR(New Radio),the explosive increment of traffic amount is calling the utilization of unlicensed band.3GPP has proposed LAA(Licensed Assisted Access)to use LTE in unlicensed band and pointed out that NR-U(NR-Unlicensed)can reuse most designs of it.However,the existing channel access mechanism of LAA is conservative under the coexistence scenario of NR-U,which leads to the waste of time resource.To address the problem this paper proposes a hybrid channel access mechanism to take advantage of the LBT(Listen-Before-Talk)mechanism of LAA when channel is quite busy and transmit directly with reduced power when it is relatively idle.The channel busy degree is judged by a series of periodically updated adaptive thresholds.System-level simulation verifies that under the coexistence scenario of NR-U the proposed mechanism can achieve higher UPT(User Perceived Throughput)and lower delay than other channel access mechanisms.

Formation Mechanism and Sedimentary Pattern of Abandoned Channels

Accurately identifying and quantitatively describing abandoned channels in meandering rivers are of great significance for improving hydrocarbon recovery. By using modern deposition analogy, field outcrop analysis, a dense well spacing, core observations and a review of the literature, this paper studied the formation process and space–time amalgamation of abandoned channels in meandering river. The results reveal that formation mechanisms of abandoned channels include chute cutoff patterns(shoal-cutting, ditch-scouring and embayment-eroding patterns) and neck cutoff patterns. The chute cutoff pattern forms a gradually abandoned channel, while the neck cutoff pattern forms a suddenly abandoned channel. From upstream to downstream, the sedimentary pattern of the abandoned channel transforms from a chute cutoff pattern to a neck cutoff pattern, where the main controlling factors transition from the grain size and gradient to the flow and vegetation. An abandoned channel formed by a chute cutoff pattern consists mainly of siltstone, fine sandstone and thin gravel layers, which form a lithological-physical barrier. The abandoned channel formed by a neck cutoff pattern consists mainly of mudstone and argillaceous siltstone, forming a lithological barrier. Based on the amalgamation and structure of the reservoir architectural elements, the abandoned channel can be divided into three planar sedimentary patterns(crescent, semilune and horseshoe) for a single channel and five vertical sedimentary patterns for composite channels.

Improved Blending Attention Mechanism in Visual Question Answering

Visual question answering(VQA)has attracted more and more attention in computer vision and natural language processing.Scholars are committed to studying how to better integrate image features and text features to achieve better results in VQA tasks.Analysis of all features may cause information redundancy and heavy computational burden.Attention mechanism is a wise way to solve this problem.However,using single attention mechanism may cause incomplete concern of features.This paper improves the attention mechanism method and proposes a hybrid attention mechanism that combines the spatial attention mechanism method and the channel attention mechanism method.In the case that the attention mechanism will cause the loss of the original features,a small portion of image features were added as compensation.For the attention mechanism of text features,a selfattention mechanism was introduced,and the internal structural features of sentences were strengthened to improve the overall model.The results show that attention mechanism and feature compensation add 6.1%accuracy to multimodal low-rank bilinear pooling network.

Significant improvements in mechanical properties of AA5083 aluminum alloy using dual equal channel lateral extrusion

Dual equal channel lateral extrusion (DECLE), as a severe plastic deformation (SPD) process, was employed forimproving the mechanical properties of AA5083 aluminum alloy. Several experiments were conducted to study the influences of theroute type, namely A and B, and pass number on mechanical properties of the material. The process was conducted up to 6 passeswith decreasing process temperature, specifically from 573 to 473 K. Supplementary experiments involving metallography, hardnessand tensile tests were carried out in order to evaluate the effects of the process variables. The hardness measurements exhibitedreasonably uniform distributions within the product with a maximum increase of 64% via a 6-pass operation. The yield and ultimatestrengths also amended 107% and 46%, respectively. These significant improvements were attributed to the severe shear deformationof grains and decreasing pass temperature, which intensified the grain refinement. TEM images showed an average grain sizereduction from 100 μm for the annealed billet to 200 nm after 6 passes of DECLE. Finally, the experimental findings for routes A andB were compared and discussed and some important conclusions were drawn.

Channel characteristics and formation mechanism of Ganjiang River

Relative straight channel of the middle and upper reaches of Ganjiang has been formed due to thecontraction of mountains and hills being composed of bedrocks on both banks of the river. But however, At the lower reaches, branching channel predominates due to limited contracting force of the river banks as the evolution and development of branching channels are closely related with locations and controle effect of nodal points. There are sufficient water containing less sediments in Ganjiang River where the sharp rise and fall of the flow discharge makes the grain size of the particles rather coars. Gravels mingled with sand dominate the channel bed and components of central bars are also much coarser than those in sandy bed of the middle and lower reaches of the Yangtze River.

A Multi-View Gait Recognition Method Using Deep Convolutional Neural Network and Channel Attention Mechanism

In many existing multi-view gait recognition methods based on images or video sequences,gait sequences are usually used to superimpose and synthesize images and construct energy-like template.However,information may be lost during the process of compositing image and capture EMG signals.Errors and the recognition accuracy may be introduced and affected respectively by some factors such as period detection.To better solve the problems,a multi-view gait recognition method using deep convolutional neural network and channel attention mechanism is proposed.Firstly,the sliding time window method is used to capture EMG signals.Then,the back-propagation learning algorithm is used to train each layer of convolution,which improves the learning ability of the convolutional neural network.Finally,the channel attention mechanism is integrated into the neural network,which will improve the ability of expressing gait features.And a classifier is used to classify gait.As can be shown from experimental results on two public datasets,OULP and CASIA-B,the recognition rate of the proposed method can be achieved at 88.44%and 97.25%respectively.As can be shown from the comparative experimental results,the proposed method has better recognition effect than several other newer convolutional neural network methods.Therefore,the combination of convolutional neural network and channel attention mechanism is of great value for gait recognition.

A TRUST MECHANISM-BASED CHANNEL ASSIGNMENT AND ROUTING SCHEME IN COGNITIVE WIRELESS MESH NETWORKS WITH INTRUSION DETECTION

Cognitive Wireless Mesh Networks(CWMN) is a novel wireless network which combines the advantage of Cognitive Radio(CR) and wireless mesh networks.CWMN can realize seamless in-tegration of heterogeneous wireless networks and achieve better radio resource utilization.However,it is particularly vulnerable due to its features of open medium,dynamic spectrum,dynamic topology,and multi-top routing,etc..Being a dynamic positive security strategy,intrusion detection can provide powerful safeguard to CWMN.In this paper,we introduce trust mechanism into CWMN with intrusion detection and present a trust establishment model based on intrusion detection.Node trust degree and the trust degree of data transmission channels between nodes are defined and an algorithm of calcu-lating trust degree is given based on distributed detection of attack to networks.A channel assignment and routing scheme is proposed,in which selects the trusted nodes and allocates data channel with high trust degree for the transmission between neighbor nodes to establish a trusted route.Simulation re-sults indicate that the scheme can vary channel allocation and routing dynamically according to network security state so as to avoid suspect nodes and unsafe channels,and improve the packet safe delivery fraction effectively.

Numerical Investigation on the Propagation Mechanism of Steady Cellular Detonations in Curved Channels

The propagation mechanism of steady cellular detonations in curved channels is investigated numerically with a detailed chemical reaction mechanism, The numerical results demonstrate that as the radius of the curvature decreases, detonation fails near the inner wall due to the strong expansion effect. As the radius of the curvature increases, the detonation front near the inner wall can sustain an underdriven detonation. In the case where deto- nation fails, a transverse detonation downstream forms and re-initiates the quenched detonation as it propagates toward the inner wall. Two kinds of propagation modes exist as the detonation is propagating in the curved channel. One is that the detonation fails first, and then a following transverse detonation initiates the quenched detonation and this process repeats itself. The other one is that without detonation failure and re-initiation, a steady detonation exists which consists of an underdriven detonation front near the inner wall subject to the diffraction and an overdriven detonation near the outer wall subject to the compression.

Clinical efficacy and safety of double-channel anastomosis and tubular gastroesophageal anastomosis in gastrectomy

BACKGROUND With the continuous progress of surgical technology and improvements in medical standards,the treatment of gastric cancer surgery is also evolving.Proximal gastrectomy is a common treatment,but double-channel anastomosis and tubular gastroesophageal anastomosis have attracted much attention in terms of surgical options.Each of these two surgical methods has advantages and disadvantages,so it is particularly important to compare and analyze their clinical efficacy and safety.AIM To compare the surgical safety,clinical efficacy,and safety of double-channel anastomosis and tubular gastroesophageal anastomosis in proximal gastrectomy.METHODS The clinical and follow-up data of 99 patients with proximal gastric cancer who underwent proximal gastrectomy and were admitted to our hospital between January 2018 and September 2023 were included in this retrospective cohort study.According to the different anastomosis methods used,the patients were divided into a double-channel anastomosis group(50 patients)and a tubular gastroesophageal anastomosis group(49 patients).In the double-channel anastomosis,Roux-en-Y anastomosis of the esophagus and jejunum was performed after proximal gastric dissection,and then side-to-side anastomosis was performed between the residual stomach and jejunum to establish an antireflux barrier and reduce postoperative gastroesophageal reflux.In the tubular gastroesophageal anastomosis group,after the proximal end of the stomach was cut,tubular gastroplasty was performed on the distal stump of the stomach and a linear stapler was used to anastomose the posterior wall of the esophagus and the anterior wall of the stomach tube.The main outcome measure was quality of life 1 year after surgery in both groups,and the evaluation criteria were based on the postgastrectomy syndrome assessment scale.The greater the changes in body mass,food intake per meal,meal quality subscale score,and total measures of physical and mental health score,the better the condition;the greater the other indicators,the worse the condition.The secondary outcome measures were intraoperative and postoperative conditions,the incidence of postoperative long-term complications,and changes in nutritional status at 1,3,6,and 12 months after surgery.RESULTS In the double-channel anastomosis cohort,there were 35 males(70%)and 15 females(30%),33(66.0%)were under 65 years of age,and 37(74.0%)had a body mass index ranging from 18 to 25 kg/m2.In the group undergoing tubular gastroesophageal anastomosis,there were eight females(16.3%),21(42.9%)individuals were under the age of 65 years,and 34(69.4%)had a body mass index ranging from 18 to 25 kg/m2.The baseline data did not significantly differ between the two groups(P>0.05 for all),with the exception of age(P=0.021).The duration of hospitalization,number of lymph nodes dissected,intraoperative blood loss,and perioperative complication rate did not differ significantly between the two groups(P>0.05 for all).Patients in the dual-channel anastomosis group scored better on quality of life measures than did those in the tubular gastroesophageal anastomosis group.Specifically,they had lower scores for esophageal reflux[2.8(2.3,4.0)vs 4.8(3.8,5.0),Z=3.489,P<0.001],eating discomfort[2.7(1.7,3.0)vs 3.3(2.7,4.0),Z=3.393,P=0.001],total symptoms[2.3(1.7,2.7)vs 2.5(2.2,2.9),Z=2.243,P=0.025],and other aspects of quality of life.The postoperative symptoms[2.0(1.0,3.0)vs 2.0(2.0,3.0),Z=2.127,P=0.033],meals[2.0(1.0,2.0)vs 2.0(2.0,3.0),Z=3.976,P<0.001],work[1.0(1.0,2.0)vs 2.0(1.0,2.0),Z=2.279,P=0.023],and daily life[1.7(1.3,2.0)vs 2.0(2.0,2.3),Z=3.950,P<0.001]were all better than those of the tubular gastroesophageal anastomosis group.The group that underwent tubular gastroesophageal anastomosis had a superior anal exhaust score[3.0(2.0,4.0)vs 3.5(2.0,5.0),Z=2.345,P=0.019]compared to the dual-channel anastomosis group.Hemoglobin,serum albumin,total serum protein,and the rate at which body mass decreased one year following surgery did not differ significantly between the two groups(P>0.05 for all).CONCLUSION The safety of double-channel anastomosis in proximal gastric cancer surgery is equivalent to that of tubular gastric surgery.Compared with tubular gastric surgery,double-channel anastomosis is a preferred surgical technique for proximal gastric cancer.It offers advantages such as less esophageal reflux and improved quality of life.

Dual Instinct and Structural Theories: DSM-5-TR

The genetic based Dual Instinct Theory is determined by evolutionary history. Aggression is required for survival and sex for propagation of species. Aggressive and sexual drive derivatives with their corresponding defence mechanisms are combined with biologically based stages of infant/child development and the functional entity of Structural Theory. This model of human nature is the applied to the diagnostic categories of DSM-5-TR. Objectives: To follow the innate Dual Instinct Theory from life to death and through Artificial Intelligence;connect it with biological stages of development of the Structural Theory and illustrate its manifestations in DSM-5-TR classifications. Method: Review of selected published literature. Applying the principle of focus and cognition of informed clinical observation of innate drive derivatives in conjunction with The Structural Theory. Both theories are functional entities with no structures involved. Sigmund Freud’s biologically based stages of development;oral, anal, genital pubic, adult, and geriatric along with a variety of unconscious, automatic, and persistent defense mechanisms are selectively folded into diagnosis listed in the manual.

Dual Mechanism and Reform Path of the Irrigation and Water Conservancy

The operating mechanism of farmland water conservancy in China was analyzed from the perspective of anthropology, and its dual mechanism characteristics and rules were exposed. The dual mechanism took different focus at different periods, thus there were some defaults. To carry out community-based water conservancy with the support of collective economy was an effective way to cope with the severe drought in the context of degraded dual mechanism.

Deformation mechanism at impact test of Al-11% Si alloy processed by equal-channel angular pressing with rotary die

Al-11%Si(mass fraction)alloy was transformed into a ductile material by equal-channel angular pressing(ECAP)with a rotary die.Two mechanisms at impact test,slip deformation by dislocation motion and grain boundary sliding,were discussed.The ultrafine grains with modified grain boundaries and the high content of fine particles(<1μm)were necessary for attaining high absorbed energy.The results contradict the condition of slip deformation by dislocation motion and coincide with that of grain boundary sliding.Many fine zigzag lines like a mosaic were observed on the side surface of the tested specimens.These observed lines may show grain boundaries appeared by the sliding of grains.

Application of Dual Attention Mechanism in Chinese Image Captioning

Objective: The Chinese description of images combines the two directions of computer vision and natural language processing. It is a typical representative of multi-mode and cross-domain problems with artificial intelligence algorithms. The image Chinese description model needs to output a Chinese description for each given test picture, describe the sentence requirements to conform to the natural language habits, and point out the important information in the image, covering the main characters, scenes, actions and other content. Since the current open source datasets are mostly in English, the research on the direction of image description is mainly in English. Chinese descriptions usually have greater flexibility in syntax and lexicalization, and the challenges of algorithm implementation are also large. Therefore, only a few people have studied image descriptions, especially Chinese descriptions. Methods: This study attempts to derive a model of image description generation from the Flickr8k-cn and Flickr30k-cn datasets. At each time period of the description, the model can decide whether to rely more on images or text information. The model captures more important information from the image to improve the richness and accuracy of the Chinese description of the image. The image description data set of this study is mainly composed of Chinese description sentences. The method consists of an encoder and a decoder. The encoder is based on a convolutional neural network. The decoder is based on a long-short memory network and is composed of a multi-modal summary generation network. Results: Experiments on Flickr8k-cn and Flickr30k-cn Chinese datasets show that the proposed method is superior to the existing Chinese abstract generation model. Conclusion: The method proposed in this paper is effective, and the performance has been greatly improved on the basis of the benchmark model. Compared with the existing Chinese abstract generation model, its performance is also superior. In the next step, more visual prior information will be incorporated into the model, such as the action category, the relationship between the object and the object, etc., to further improve the quality of the description sentence, and achieve the effect of “seeing the picture writing”.

Analysis and Design of Conjugate Cam Shedding Mechanism with Dual Driving Shafts

The principle of conjugate cam shedding mechanism forthe outside tappets with dual driving shafts is discussed,and its design conditions and parameters are studied,giving the results of practical calculations finally.