Performance and Safety Improvement of Induction Motors based on Testing and Evaluation Standards

The induction motor,which converts electrical energy into mechanical energy,has been recognized as the cornerstone of industrialization.The rotor of an induction motor can be either a squirrel cage rotor or a wound-type rotor,both existing as magnetless topologies.Three-phase squirrel cage induction motors are frequently utilized in industrial drives because they are dependable,have high starting torque,are selfstarting and affordable.Single-phase induction motors,on the other hand,are commonly used for small loads such as domestic appliances in form of modest fans,pumps and electric power tools.In South Africa,there have been reports of fires and explosions resulting in live and property loss because of induction motors that have not been thoroughly tested or are incorrectly labelled in terms of ratings,electrical safety and performance.The goal of this study is targeted at preventing end-user injuries and failures caused by non-compliant induction motors,by evaluating locally manufactured/imported induction motors based on tests and evaluation from standards(IEC and SANS).The study is conducted using experimental procedures at the Explosion Prevention Technology and Rotating Machines(EPT and RM)laboratory,South African Bureau of Standards(SABS),South Africa.The main finding from the study shows differences in the nameplate characteristics of various induction motors which could have detrimental effects such as production and operational downtime in their end-use industries,at later stages.

ETSI-ITU Symposium on ICT Sustainability:Standards Driving Environmental Innovation

The symposium will bring together industry leaders,policymakers,researchers and stakeholders to explore the crucial role of standards in promoting sustainable ICT practices.Standards guide the development of technologies that minimize environmental impact and enhance energy efficiency.

Dialogue on standards:directions and difficulties of standardization discipline construction

To probe into the directions and difficulties of standardization discipline construction in China,China Standardization Press organized a pertinent dialogue on July 10.During the event,Yu Xinli,President of China Association for Standardization,was invited as the moderator.Several standardization experts including Song Mingshun,Mai Lyubo,Qiang Yi,Cao Lili,and Huang Manxue from the China Standardization Expert Committee and renowned universities and research institutes in the country were invited as guests to give their insightful views.

Review on the Development of Cosmetic Industry from the Perspective of Group Standards

From the perspective of group standards, the dynamics of the cosmetic industry in the past few years were briefly reviewed and analyzed, including the number of group standards published, types of group standards, groups, and geographical distribution of the groups. The large number of participating groups and the wide range of geographical distribution indicated that group standards could play a positive role in the sustained and positive development of cosmetic industry. The future development of cosmetic industry was also prospected。

Study on Quality Standards of Jianjin Zhuanggu Paste

[Objectives]Some Chinese medicinal materials of Jianjin Zhuanggu Paste were microscopically identified,and several active ingredients were studied by thin-layer identification,which provides reference for further improving the quality standards of hospital preparations.[Methods]The effective components of Jianjin Zhuanggu Paste were qualitatively identified by thin-layer chromatography(TLC).[Results]The microscopic identification of the three Chinese medicinal materials in Jianjin Zhuanggu Paste showed the microscopic characteristics of Radix Codonopsis,Radix Astragali and Radix Notoginseng.TLC identification showed that there were characteristic spots of Radix Codonopsis,Radix Astragali,Radix Rehmanniae Preparata and Radix Notoginseng in Jianjin Zhuanggu Paste.[Conclusions]This study established the quality standard research method of Jianjin Zhuanggu Paste,which further strengthens the safety standards of hospital preparations,and improves the clinical efficacy of drugs,as well as the quality standards of hospital preparations to a certain extent.

Effect of building energy efficiency standards on carbon emission efficiency in commercial buildings

The building sector plays a crucial role in the worldwide shift toward achieving net-zero emissions.Building energy efficiency standards(BEESs)are highly effective policies for reducing carbon emissions.Therefore,exploring the provincial variations in carbon emission efficiency(CEE)in the building sector and identifying the effect of BEESs on CEE is crucial.This study focuses on commercial buildings in China and applies a difference in differences model to evaluate the impact of BEESs on the CEE of commercial buildings.The slacks-based measure–data envelopment analysis model is employed to assess the CEE of commercial buildings in 30 Chinese provinces from 2000 to 2019.Furthermore,heterogeneous tests are used to explore how climate characteristics and economic conditions affect the efficiency of BEESs.The results indicate that BEESs positively influence the CEE of commercial buildings.Specifically,a 1%increase in the intensity of BEESs causes a 0.1484%increase in the CEE of commercial buildings.Moreover,the impact of BEESs is particularly pronounced in the southern and western provinces.This study provides valuable scientific evidence for governments to enhance BEESs implementation.

Formulation of Work-Study Combined and Result-Oriented Integrated Curriculum Standards

According to the Annex Technical Regulations for Integrated Curriculum Development(Trial)in Document No.30 of the General Office of the Ministry of Human Resources and Social Security(2012),this paper studies the formulation of the curriculum standards for the integration of Chinese medicinal materials production.We focus on the formulation ideas of the curriculum standards for the integration of Chinese medicinal materials production,the formulation process of the curriculum standards for the integration of Chinese medicinal materials production,including the description of typical work tasks,the determination of curriculum objectives,the analysis of study content,the description of referential study tasks,teaching implementation suggestions,assessment and evaluation suggestions,which can provide a reference for the development and research of other related integrated courses.

Analysis of Standards and Effects of Police Indirect Court of Human Rights——Taking“Akbay and Others v.Germany”as an Example

The European Court of Human Rights(ECtHR)has ruled that illegal indirect entrapment must meet three criteria simultaneously.This mixed standard requires that the previous direct entrapment violates the“essentially passive,”subsequent indirect entrapment satisfies the“reasonable foreseeability,”and police entrapment of secondary defendants to commit crimes is considered“decisive.”The legal consequences of indirect entrapment are distinguished between general indirect entrapment and illegal indirect entrapment.The basic position of the ECtHR on the consequences of illegal indirect entrapment has shifted from supporting mitigating penalties to recognizing procedural dismissal,and general indirect entrapment is considered a mitigating factor in sentencing.Against the backdrop of increasing internationalization of criminal justice standards,the above criteria and positions have strong implications for the improvement of relevant rules in China.

Teaching Reform and Practice of Functional Experiment Based on the Cultivation of Excellent Medical Talents

In order to cultivate excellent clinical medical talents with a solid foundation, strong literacy, refined skills, excellent communication abilities, innovative thinking, and a strong focus on practicality, functional experiments have undergone a series of reforms in areas such as constructing new curriculum systems, improving teaching content, updating teaching equipment, introducing new teaching models, and enhancing teaching evaluation systems.

Unexpected Twinning and Phase-Transition of the Indentation Standards, Their Transition Energies, and Scientific Dichotomy

The general use of aluminium as an indentation standard for the iteration of contact heights for the determination of ISO-14577 hardness and elastic modulus is challenged because of as yet not appreciated phase-changes in the physical force-depth standard curve that seemed to be secured by claims from 1992. The physical and mathematical analyses with closed formulas avoid the still world-wide standardized energy-law violation by not reserving 33.33% (h2 belief) (or 20% h3/2 physical law) of the loading force and thus energy for all not depth producing events but using 100% for the depth formation is a severe violation of the energy law. The not depth producing part of the indentation work cannot be done with zero energy! Both twinning and structural phase-transition onsets and normalized phase-transition energies are now calculated without iterations but with physically correct closed arithmetic equations. These are reported for Berkovich and cubecorner indentations, including their comparison on geometric grounds and an indentation standard without mechanical twinning is proposed. Characteristic data are reported. This is the first detection of the indentation twinning of aluminium at room temperature and the mechanical twinning of fused quartz is also new. Their disqualification as indentation standards is established. Also, the again found higher load phase-transitions disqualify aluminium and fused quartz as ISO-ASTM 14577 (International Standardization Organization and American Society for Testing and Materials) standards for the contact depth “hc” iterations. The incorrect and still world-wide used black-box values for H- and Er-values (the latter are still falsely called “Young’s moduli” even though they are not directional) and all mechanical properties that depend on them. They lack relation to bulk moduli from compression experiments. Experimentally obtained and so published force vs depth parabolas always follow the linear FN = kh3/2 + Fa equation, where Fa is the axis-cut before and after the phase-transition branches (never “h2” as falsely enforced and used for H, Er and giving incorrectly calculated parameters). The regression slopes k are the precise physical hardness values, which for the first time allow for precise calculation of the mechanical qualities by indentation in relation to the geometry of the indenter tip. Exactly 20% of the applied force and thus energy is not available for the indentation depth. Only these scientific k-values must be used for AI-advises at the expense of falsely iterated indentation hardness H-values. Any incorrect H-ISO-ASTM and also the iterated Er-ISO-ASTM modulus values of technical materials in artificial intelligence will be a disaster for the daily safety. The AI must be told that these are unscientific and must therefore be replaced by physical data. Iterated data (3 and 8 free parameters!) cannot be transformed into physical data. One has to start with real experimental loading curves and an absolute ZerodurR standard that must be calibrated with standard force and standard length to create absolute indentation results. .

Analysis of Standards Establishment for the Testing of Electrical Appliances

As science and technology continue to develop,power equipment has become an indispensable part of industrial production and daily life.Whether it is the precise automation machinery utilized on production lines or the convenient electrical appliances found in households,their functionality relies heavily on electrical technology.Nonetheless,without stringent safety and performance assurances,these devices could potentially endanger lives and property.Thus,this paper explores the development strategy for establishing a standardized system within the electrical testing service industry,aiming to ensure safety and reliability.

The effect of high-fidelity simulation in medical nursing based on the healthcare simulation standards of best practice

Background:High-fidelity simulation has been demonstrated to make great progress in learning.However,there is still ongoing exploration on how to fully harness the advantages of this teaching method and enhance its effectiveness.This study conducted high-fidelity simulation in medical nursing based on the Healthcare Simulation Standards of Best Practice and evaluated its effect.Methods:The study was conducted from September 2019 to June 2020.A total of 82 undergraduate nursing students from a university in Shanghai participated in the high-fidelity simulation in medical nursing.The simulation design scale,educational practices in simulation scale,and students’satisfaction and self-confidence were used to evaluate the effect.Results:The mean score of simulation design scale was 4.06±0.63 with the mean scores of all dimensions being over 3.0.The mean score of educational practices in simulation scale was 4.14±0.56 with the mean scores of all dimensions being over 4.0.The mean scores of students’satisfaction and self-confidence were 4.07±0.72 and 3.89±0.58,respectively.Conclusion:Students reported high levels of simulation design and educational practices in simulation.They were also satisfied with learning and reported high levels of self-confidence.Some key points need to be considered so that the learning effects might be optimized.

Preliminary Study on Overseas Applicability of Chinese Architectural Design Standards:Taking China-Aided Construction Projects in Asia Since the Belt and Road Initiative as Examples

This research takes China-aided construction projects in Asia since the Belt and Road Initiative as examples to explore the applicability of Chinese architectural design standards in other Asian countries.So far,the standards demonstrated the highest applicability in South Asia is the best followed by Southeast Asia.Chinese architectural design standards for educational buildings showed the highest applicability,followed by office,medical,and sports buildings.This study puts forward some strategies to improve the applicability of Chinese architectural design standards.These strategies include integrating regionalism and local cultural traditions,optimizing energy efficiency,and aligning designs with local usage habits.This study serves as a reference for similar projects in the future.

Analysis of The Impact of Excellent Event Management on the Safety of Patients and Clinical Caregivers

Objective: To investigate the impact of excellent event management in improving patient safety and nursing staff care satisfaction. Methods: The study was analyzed by retrospective comparison, and routine management from January 2022 to December 2022 was set as the control group, and excellent event management from January 2023 to January 2024 was set as the study group. The differences in nursing outcomes between both groups were compared. Results: The rate of adverse events in the study group (0.61%) was lower than that in the control group (0.96%), and the rate of excellent events in the study group (2.57%) was higher than that in the control group (0.97%) (P < 0.05). Meanwhile, the satisfaction level of nursing safety in the study group reached 98.81%, which was much higher than in the control group (92.21%) (P < 0.05). Conclusion: Nursing excellent event management had a positive impact on improving patient care safety satisfaction, reducing the rate of adverse events, and increasing the rate of reporting excellent events.

环的左Excellent扩张与左总体维数

利用环和模范畴的有关理论,研究环的左Excellent扩张与左总体维数,证明了当环S是环R的左Excel-lent扩张时,lgdS=lgdR,并推广了有关的结论.

Study on Designing Standards System Framework of Hainan National Breeding and Multiplication

A preliminary feasibility study was set up for the HNBM standard system. By introducing the set theory and basic methods of the solid geometry and adopting the Verman three-dimensional structure ideology innovatively, the standards system of Hainan National Breeding and Multiplication (HNBM) was studied with the four-dimensional structure and integration by combining with the time dimension. The four-dimensional structure standards system will be useful for guiding the construction of the HNBM standards system, carrying on the division of labor and realizing the dynamic development of the standards system. The standards set of HNBM helps to computer programming and information management.

Excellent扩张与Smach积

设Ｒ是有单位元的环，Ｓ是Ｒ的Ｅｘｃｅｌｌｅｎｔ扩张，Ｇ是有限群且｜Ｇ｜￣（－１）∈Ｒ．证明了Ｒ是右余半遗传环（ＱＦ－３环，ＧＶ－环）当且仅当Ｓ是右余半遗传环（ＱＦ－３环，ＧＶ－环），也当且仅当Ｓｍａｃｈ积Ｒ＃Ｇ是右余半遗传环（ＱＦ－３环，ＧＶ－环）．

Quality Evaluation and Standards Development of Liquid Spawn of Pleurotus eryngii

With four Pleurotus eryng# varieties as test materials, the mycelium pelletdensity, dry weight and diameter, fermentation broth pH value, and deoxidized sugar content were determined during their liquid fermentation to investigate the growth of mycelia and changes in fermentation broth. In addition, the sensory, biochemical and microbiological indicators of excellent P. eryngii mycelia were determined by sensory tests, microscope morphology observation and mycelium pellet back-inoculation tests. The results showed that the standards for high-quality liquid spawn of P. eryngii were as follows： bacterial liquid was light yellow and clarifiedwith rich bitter almond flavor but no bacterial contamination; mycelium pellets were visible, white and uniform with burrs on the surface, diameter 〈2.5 mm and concentration of 80%-100%; mycelium pellets were stout, and there were 3--4 clamp connectionsper visual field under the microscope; fermentation time was generally 120-144 h.

Optimization on Identification Standards and Artificial Inoculation Methods In Vitro on Resistance to Chrysanthemum White Rust

[Objective] This research aimed at exploring an effective way for inoculation and identification of chrysanthemum white rust under controlled conditions. [Method] By combining the observation methods with the naked eye and under optical microscope, we had established the identification standards for chrysanthemum white rust with six classifications and optimized artificial inoculation methods in vitro. [Result] The results showed that bottled cuttings identification method and petri dished leaves identification method both can be used for identification in vitro of chrysanthemum white rust, bottled cuttings identification method had shown better effects than petri dished leaves identification method, and was supposed to be best artificial inoculation and identification method in vitro. [Conclusion] This research had provided a scientific method for safe and effective researches on chrysanthemum white rust, in order to control the occurrence and diffusion of this quarantine disease.