Lateral earth pressure of granular backfills on retaining walls with expanded polystyrene geofoam inclusions under limited surcharge loading

Existing studies have focused on the behavior of the retaining wall equipped with expanded polystyrene(EPS)geofoam inclusions under semi-infinite surcharge loading rather than limited surcharge loading.In this paper,the failure mode and the earth pressure acting on the rigid retaining wall with EPS geofoam inclusions and granular backfills(henceforth referred to as EPS-wall),under limited surcharge loading are investigated through two-and three-dimensional model tests.The testing results show that different from the sliding of almost all the backfill in the EPS-wall under semi-infinite surcharge loading,only an approximately triangular backfill slides in the wall under limited surcharge loading.The distribution of the lateral earth pressure on the EPS-wall under limited surcharge loading is non-linear,and the distribution changes from the increase of the wall depth to the decrease with the increase of the limited surcharge loading.An approach based on the force equilibrium of a differential element is developed to predict the lateral earth pressure behind the EPS-wall subjected to limited surcharge loading,and its performance was fully validated by the three-dimensional model tests.

Key Factors to Consider When Introducing a New Vaccine in Low-Income Settings: Lessons from Malawi Expanded Program on Immunization

Introduction: As new vaccines become available, countries must assess the relevance to introduce them into their vaccination schedules. Malawi has recently introduced several new vaccines and plans to introduce more. This study was conducted to identify key factors that need to be considered when deciding to introduce a new vaccine and current challenges faced by low and middle income countries using Malawi as an example. Methodology: The study employed a desk review approach, examining published literature from various sources such as PubMed, Medline, and Google Scholar. Policy documents from organizations like the World Health Organization, GAVI the Alliance, and the Ministry of Health for Malawi were also included. A total of 99 articles and documents on new vaccine introduction, challenges of immunization, policy documents in immunization and health systems strengthening were included. The review focused on addressing five key areas critical to new vaccine introduction namely: the need for a vaccine, availability of the vaccine, safety and effectiveness of the vaccine, demand for the vaccine, and the prudent use of public or private funds. Results: Malawi considered the burden of cervical cancer and the significance of malaria in the country when introducing the HPV and malaria vaccines. The country opted for vaccines that can be handled by the cold chain capacity and available human resources. Despite that malaria vaccine and Typhoid Conjugate Vaccine trials were done in country, there are limited vaccine safety and efficacy trials conducted in Malawi, leading to a reliance on WHO-prequalified vaccines. Demand for newly introduced vaccines varied, with high demand for Oral Cholera Vaccine during a cholera outbreak, while demand for COVID-19 vaccines decreased over time. Although cost-effectiveness studies were limited in the country, 2 studies indicated that Typhoid Conjugate Vaccine and malaria vaccine would be cost effective. All these have been implemented despite having challenges like lack of accurate surveillance data, inadequate cold chain capacity, limited safety and efficacy vaccine clinical trials, political influence, and limited funding. Conclusion: Despite several challenges Malawi set a good example of the careful considerations required before introducing a new vaccine. The process involves data review, priority setting, precise planning, and consultation with stakeholders. Low-income countries should invest in vaccine safety, efficacy, and cost-effectiveness trials.

Compression properties of cost-efficient porous expanded clay reinforced AA7075 syntactic foams fabricated by industrial-oriented die casting technology

In today’s manufacturing industries,hard competition between rival firms makes it compulsory for researchers to design lighter and cheaper machine components due to the megatrends of cost-effectiveness and anti-pollution.At this point,aluminum syntactic foams(ASFs)are new-generation engineering composites and come into the upfront as a problem-solver.Owing to their features like low density,sufficient elongation,and perfect energy absorption ability,these advanced foams have been considerably seductive for many industrial sectors nowadays.In this study,an industrial-oriented automatic die casting technology was used for the first time to manufacture the combination of AA7075/porous expanded clay(PEC).Micro evaluations(optical and FESEM)reveal that there is a homogenous particle distribution in the foam samples,and inspections are compatible with the other ASF studies.Additionally,T6 aging heat treatment was operated on one half of the produced foams to explore the probable impact of aging on the compressive responses.Attained results show that PEC particles can be an alternative to expensive hollow spheres used in the previous works.Besides,a favorable relationship is ascertained between the aging treatment and mechanical properties such as compression strength and plateau strength.

Optimization of Channel Structure of Alkaline Water Electrolyzer by Using an Expanded Mesh as a Bipolar Plate

Alkaline water electrolysis(AWE)is the most mature technology for hydrogen production by water electrolysis.Alkaline water electrolyzer consists of multiple electrolysis cells,and a single cell consists of a diaphragm,electrodes,bipolar plates and end plates,etc.The existing industrial bipolar plate channel is concave-convex structure,which is manufactured by complicated and high-cost mold punching.This structure still results in uneven electrolyte flow and low current density in the electrolytic cell,further increasing in energy consumption and cost of AWE.Thereby,in this article,the electrochemical and flow model is firstly constructed,based on the existing industrial concave and convex flow channel structure of bipolar plate,to study the current density,electrolyte flow and bubble distribution in the electrolysis cell.The reliability of the model was verified by comparison with experimental data in literature.Among which,the electrochemical current density affects the bubble yield,on the other hand,the generated bubbles cover the electrode surface,affecting the active specific surface area and ohmic resistance,which in turn affects the electrochemical reaction.The result indicates that the flow velocity near the bottom of the concave ball approaches zero,while the flow velocity on the convex ball surface is significantly higher.Additionally,vortices are observed within the flow channel structure,leading to an uneven distribution of electrolyte.Next,modelling is used to optimize the bipolar plate structure of AWE by simulating the electrochemistry and fluid flow performances of four kinds of structures,namely,concave and convex,rhombus,wedge and expanded mesh,in the bipolar plate of alkaline water electrolyzer.The results show that the expanded mesh channel structure has the largest current density of 3330 A/m^(2)and electrolyte flow velocity of 0.507 m/s in the electrolytic cell.Under the same current density,the electrolytic cell with the expanded mesh runner structure has the smallest potential and energy consumption.This work provides a useful guide for the comprehensive understanding and optimization of channel structures,and a theoretical basis for the design of large-scale electrolyzer.

Study of Rice Husks and Expanded Polystyrene Composites for Construction Applications

In the current context of environmental challenges, this study focuses on developing innovative and eco-friendly composites using rice husk and recycled expanded polystyrene. This dual-responsibility approach valorizes a by-product like rice husk, often considered waste, and reuses polystyrene, a plastic waste, thereby contributing to CO2 emission reduction and effective waste management. The manufacturing process involves dissolving recycled polystyrene into a solvent to create a binder, which is then mixed with rice husk and cold-compacted into composite materials. The study examines the impact of two particle sizes (fine and coarse) and different proportions of recycled polystyrene binder. The results show significant variations in the mechanical characteristics of the composites, with Modulus of Rupture (MOR) values varying from 2.41 to 3.47 MPa, Modulus of Elasticity (MOE) ranging from 223.41 to 1497.2 MPa, and Stiffness Coefficient (K) from 5.04 to 33.96 N/mm. These characteristics demonstrate that these composites are appropriate for various construction applications, including interior decoration, panel claddings, and potentially for furniture and door manufacturing when combined with appropriate coatings. This study not only highlights the recycling of agricultural and plastic waste but also provides a localized approach to addressing global climate change challenges through the adoption of sustainable building materials.

Induced pluripotent stem cell-related approaches to generate dopaminergic neurons for Parkinson's disease

The progressive loss of dopaminergic neurons in affected patient brains is one of the pathological features of Parkinson's disease,the second most common human neurodegenerative disease.Although the detailed pathogenesis accounting for dopaminergic neuron degeneration in Parkinson's disease is still unclear,the advancement of stem cell approaches has shown promise for Parkinson's disease research and therapy.The induced pluripotent stem cells have been commonly used to generate dopaminergic neurons,which has provided valuable insights to improve our understanding of Parkinson's disease pathogenesis and contributed to anti-Parkinson's disease therapies.The current review discusses the practical approaches and potential applications of induced pluripotent stem cell techniques for generating and differentiating dopaminergic neurons from induced pluripotent stem cells.The benefits of induced pluripotent stem cell-based research are highlighted.Various dopaminergic neuron differentiation protocols from induced pluripotent stem cells are compared.The emerging three-dimension-based brain organoid models compared with conventional two-dimensional cell culture are evaluated.Finally,limitations,challenges,and future directions of induced pluripotent stem cell–based approaches are analyzed and proposed,which will be significant to the future application of induced pluripotent stem cell-related techniques for Parkinson's disease.

Enhancing perianal disease management with integrated physical and psychological approaches

This article provides a comprehensive analysis of the study by Hou et al,focusing on the complex interplay between psychological and physical factors in the postoperative recovery(POR)of patients with perianal diseases.The study sheds light on how illness perception,anxiety,and depression significantly influence recovery outcomes.Hou et al developed a predictive model that demonstrated high accuracy in identifying patients at risk of poor recovery.The article explores the critical role of pre-operative psychological assessment,highlighting the need for mental health support and personalized recovery plans in enhancing POR quality.A multidisciplinary approach,integrating mental health professionals with surgeons,anesthesiologists,and other specialists,is emphasized to ensure comprehensive care for patients.The study’s findings serve as a call to integrate psychological care into surgical practice to optimize outcomes for patients with perianal diseases.

A novel approach for synthesis of expanded graphite and its enhanced lithium storage properties

Relying on the great success in portable and smart devices,lithium ion batteries(LIBs)have been considered as one of the leading technologies in electric vehicles(EVs)and stationary energy storage systems(ESSs).With the rapid development of EVs and ESSs,the technology upgrading of LIBs is highly demanded.As expected,it requires LIBs with improved power and energy densities[1].

Expanded Endoscopic Endonasal Approach (EEEA) for Clival Chordomas

Objective: To evaluate the role of expanded endoscopic endonasal approach in removal of clival chordomas. Patients & Methods: Nine patients with clival chordomas were operated upon in Cairo University hospital from September 2015 to September 2018 using the EEEA a recurrent case and seven new cases were involved in these study and ten operations were done. All patients had preoperative neurological and radiological examination. The study was focusing on the approach, efficacy of tumor removal, reconstruction of the base and complications related to this approach. Results: Nine patients were operated in this study in which ten operations were done. It included six males (66.6%) and three females (33.3%) with age ranging from 4 years to 63 years with average age 40.7 years. Headache and diplopia were the most common symptoms found in six patients (66.6%). Brainstem affection was found in two patients (22.2%). Lower cranial nerves affection was found in two patients (22.2%). One case developed CSF leakage postoperatively (11.1%). Two patients underwent tracheostomy. We achieve total removal in four patients (44.4%), near total removal in one patient (11.1%) and subtotal tumor resection in four patients (44.4%). Conclusion: EEEA for clival chordomas is safe and effective approach regarding the results of the incidence of complications, and the percentage of tumor resection.

Chyle leak following root of mesentery dissection in pancreaticoduodenectomy with inferior infracolic superior mesenteric artery first approach

BACKGROUND The root of mesentery dissection is one of the critical maneuvers,especially in borderline resectable pancreatic head cancer.Intra-abdominal chyle leak(CL)including chylous ascites may ensue in up to 10%of patients after pancreatic resections.Globally recognized superior mesenteric artery(SMA)first approaches are invariably performed.The mesenteric dissection through the inferior infracolic approach has been discussed in this study emphasizing its post-operative impact on CL which is the cornerstone of this study.AIM To assess incidence,risk factors,clinical impact of CL following root of mesentery dissection,and the different treatment modalities.METHODS This is a retrospective study incorporating the patients who underwent dissection of the root of mesentery with inferior infracolic SMA first approach pancreat-oduodenectomy for the ventral body and uncinate mass of pancreas in the Department of Gastrointestinal and General Surgery of Kathmandu Medical College and Teaching Hospital from January 1,2021 to February 28,2024.Intraop-erative findings and postoperative outcomes were analyzed.RESULTS In three years,ten patients underwent root of mesentery dissection with inferior infracolic SMA first approach pancreatoduodenectomy.The mean age was 67.6 years with a male-to-female ratio of 4:5.CL was seen in four patients.With virtue of CL,Clavien-Dindo grade Ⅱ or higher morbidity was observed in four patients.Two patients had a hospital stay of more than 20 days with the former having a delayed gastric emptying and the latter with long-term total parenteral nutrition requirement.The mean operative time was 330 minutes.Curative resection was achieved in 100%of the patients.The mean duration of the intensive care unit and hospital stay were 2.55±1.45 days and 15.7±5.32 days,respectively.CONCLUSION Root of mesentery dissection with lymphadenectomy and vascular resection correlated with occurrence of CL.After complete curative resection,these were managed with total parenteral nutrition without adversely impacting outcome.

基于SCI-EXPANDED的世界大豆研究动态分析

基于Web of Science平台的SCI—EXPANDED数据库，采用文献计量学方法，以世界和中国发表于1995—2013年的大豆相关研究论文为检索对象，分析了不同国家、机构、作者和期刊的论文数目及引用频次、学科分布和论文语种等情况。借助CiteSpaceⅢ信息可视化软件绘制大豆研究的科学知识图谱，直观地展示和分析了大豆研究的知识基础和前沿领域。结果表明：1995—2013年SCI—EXPANDED数据库共收录17576篇大豆相关研究论文，发文的36190位作者来自122个国家的5879个机构。论文数目呈波动增长态势，美国、巴西、中国、日本和韩国大豆相关研究论文数目居前5位；美国农业部所属机构、艾奥瓦州立大学和伊利诺伊大学等机构的论文质量较高。发表大豆相关论文数目位居世界前5位的作者为美国科学家Hartman G L、Shoemaker R C、Boerma H R、Nelson R L和加拿大科学家Cober E R。载文量排名前5位的期刊分别是Crop Science、Journal of Agricultural and Food Chemistry、Journal of the American Oil Chemists Society、Agronomy Journal和Pesquisa Agropecuaria Brasileira。论文主要集中在植物学、农艺学、食品科学和技术、农业一跨学科、应用化学、生物化学和和分子生物学等学科。大豆分子生物学、植物保护、遗传育种、加工和品质、转基因技术、豆粕饲料和生物柴油研究是世界大豆研究的前沿领域。中国大豆研究的整体规模和水平均已位于世界前列，但在国际高影响力刊物上发表的论文数量还不多，国际影响力有待进一步提升。

基于SCI-EXPANDED的植物蛋白质组学文献计量分析

[目的]从文献计量角度分析1999～2012年植物蛋白质组学研究状况。[方法]以SCI-EXPANDED数据库为检索对象,根据不同国家、机构和作者的发文量,文献被引频次和载文期刊的分布情况等方面分析1999～2012年国际和国内的植物蛋白质组学研究热点。[结果]近5年关于植物蛋白质组学的文献发表量激增,美国在该领域具有绝对的领先优势,我国近年来的研究产出增长迅速。亚细胞蛋白质组学、植物响应胁迫蛋白质组学、翻译后修饰蛋白质组学和蛋白质相互作用等多个方面的基础研究是国际上近几年的研究热点;植物响应胁迫蛋白质组学、亚细胞蛋白质组学以及翻译后修饰蛋白质组学则是我国近几年的热点研究方向。[结论]近年来我国在植物蛋白质组学研究领域发展较快,但与国际领先水平相比,还有一定差距。

Antimicrobial Expanded Polytetrafluoroethylene Film Prepared by 3-ray Radiation Induced Grafting of Poly（acrylic acid）

The simultaneous γ-ray-radiation-induced grafting polymerization of acrylic acid on ex- panded polytetrafluoroethylene （ePTFE） film was investigated. It was found that the degree of grafting （DG） of poly（acrylic acid） （PAA） can be controlled by the monomer concentration, absorbed dose, and dose rate under an optimal inhibitor concentration of [Fe2＋]=18 mmol/L. SEM observation showed that the macroporous structure in ePTFE films would be covered gradually with the increase of the DG of PAA. The prepared ePTFE-g-PAA film was im- mersed in a neutral silver nitrate solution to fabricate an ePTFE-g-PAA/Ag hybrid film after the addition of NaBH4 as a reduction agent of Ag＋ to Ag atom. SEM, XRD, and XPS results proved that Ag nanoparticles with a size of several tens of nanometers to 100 nanometers were in situ immobilized on ePTFE film. The loading capacity of Ag nanoparticles could be tuned by the DG of PAA, and determined by thermal gravimetric analysis. The quart- titative antibacterial activity of the obtained ePTFE-g-PAA/Ag hybrid films was measured using counting plate method. It can kill all the Escherichia coli in the suspension in 1 h. Moreover, this excellent antibacterial activity can last at least for 4 h. This work provides a facile and practical way to make ePTFE meet the demanding antimicrobial requirement in more and more practical application areas.

Preparation of Expanded Graphite-based Composites by One Step Impregnation

A new method for preparing expanded graphite-based composites （EGCs） was developed.The obtained samples were characterized by scanning electron microscopy （SEM）,transmission electron microscope （TEM） and nitrogen adsorption.The experimental results indicated that the EGCs was not simply mechanical mixture of EG and activated carbon,instead the activated carbon was coated on the surface of interior and external pores of the EG in the form of thin carbon layer.The thickness of the activated carbon layer was nearly one hundred nanometers by calculation.It was shown that the higher the impregnation ratio and the activation temperature were,the easier the porosity development would be.And the BET surface area and the total pore volume were as high as 1978 m2/g and 0.9917 cm3/g respectively at 350℃ with an impregnation ratio of 0.9.

Formation of NiFe_2O_4/Expanded Graphite Nanocomposites with Superior Lithium Storage Properties

A Ni Fe_2O_4/expanded graphite(Ni Fe_2O_4/EG)nanocomposite was prepared via a simple and inexpensive synthesis method. Its lithium storage properties were studied with the goal of applying it as an anode in a lithium-ion battery. The obtained nanocomposite exhibited a good cycle performance, with a capacity of 601 m Ah g^(-1)at a current of 1 A g^(-1)after 800 cycles. This good performance may beattributed to the enhanced electrical conductivity and layered structure of the EG. Its high mechanical strength could postpone the disintegration of the nanocomposite structure,efficiently accommodate volume changes in the Ni Fe_2O_4-based anodes, and alleviate aggregation of Ni Fe_2O_4 nanoparticles.

Stability of expanded granular sludge bed process for terylene artificial silk printing and dyeing wastewater treatment

Terylene artificial silk printing and dyeing wastewater(TPD wastewater), containing averaged 710 mg/L terephthalic acid(TA) as the main carbon source and the character pollutant, was subjected to expanded granular sludge bed(EGSB) process. The stability of the EGSB process was firstly conducted by laboratory experiment. TA ionization was the predominated factor influencing the acid-base balance of the system. High concentration of TA in wastewater resulted in sufficient buffering capacity to neutralize the volatile fatty acids(VFA) generated from substrate degradation and provided strong base for anaerobic system to resist the pH decrease below 6.5. VFA and UFA caused almost no inhibition on the anaerobic process and biogas production except that pH was below 6.35 and VFA was at its maximum value. Along with the granulating of the activated sludge, the efficiency of organic removal and production rate of biogas increased gradually and became more stable. After start-up, the efficiency of COD removal increased to 57%—64%, pH stabilized in a range of 7.99—8.04, and production rate of biogas was relatively high and stable. Sludge granulating, suitable influent of pH and loading were responsible for the EGSB stability. The variation of VFA concentration only resulted in neglectable rebound of pH, and the inhibition from VFA could be ignored in EGSB. The EGSB reactor was stable for TPD wastewater treatment.

Fabrication, property characterization and thermal performance of composite phase change material plates based on tetradecanol-myristic acid binary eutectic mixture/expanded perlite and expanded vermiculite for building application

A binary eutectic mixture composed of tetradecanol(TD)and myristic acid(MA)was maximally absorbed into the microstructures of expanded perlite(EP)and expanded vermiculite(EVMT),respectively,through a self-made vacuum adsorption roller to prepare phase change material(PCM)particle(PCP).Then EP and EVMT-based composite PCM plates were respectively fabricated through a mold pressing method.The thermal property,chemical stability,microstructure and durability were characterized by differential scanning calorimeter(DSC),Fourier transform infrared spectroscope(FT-IR),scanning electron microscope(SEM)and thermal cycling tests,respectively.The results show that both PCPs have high latent heats with 110 J/g for EP-based PCP and more than 130 J/g for EVMT-based PCP,compact microstructure without PCM leakage,stable chemical property and good durability.The research results have proved the feasibility for the vacuum adsorption roller used in the composite PCM fabrication.Results of thermal storage performance experiment indicate that the fabricated PCM plates have better thermal inertia than common building materials,and the thermal storage performance of PCM plates has nonlinearly changed with outside air velocity and temperature increase.Therefore,PCM plates show a significant potential for the practical application of building thermal storage.

Study of Turbulent Flow of Film Cooling Holes with Lateral Expanded Exits

Hot wire measurements and flow visualization are presented for studying the turbulent flow field over a flat gas turbine film cooling blade with lateral expanded holes. Three mass flux ratios of jet to free stream, M = 0.5, 0.89, 1.5, are tested. The streamwise velocity, the turbulent intensities and the Reynolds shear stress are measured. The effect of the lateral expanded holes on the improvement of the turbulent flow field for film cooling of gas turbines can be analyzed from the measured spatial di...

Native Expanding <i>Merremia boisiana</i>Is Not More Allelopathic than Its Non-Expanding Congener <i>M. vitifolia</i>in the Expanded Range in Hainan

Exotic invaders may possess novel biochemical weapons that native plants do not have, and these novel biochemical weapons may be more allelopathic than those from native plants to other native competitors. During range expansion, native species also encounter many new plant competitors. Thus, allelochemicals from native expanding species may also be more novel and allelopathic than those from non-expanding species to other plant competitors in the expanded range. We test this hypothesis using the native expanding Merremia boisiana and its non-expanding congener M. vitifolia in year 2012 inthe expanded range inHainan. In petridish bioassays, we found that aqueous extracts of M. boisiana leaves were often less inhibitory or more stimulatory to seed germination and seedling growth of five vegetable species than those of M. vitifolia leaves. In pot culture, we also found that aqueous leaf extracts of the two congeners could both inhibit the growth of a naturally co-occurring plant Paederia scanden, but their effects did not differ from each other. These results indicate that while allelopathy may contribute to the competitive ability of M. boisiana, it may not act as a novel weapon explaining its success in the expanded range in Hainan.

Hydration Heat Effect of Cement Pastes Modified with Hydroxypropyl Methyl Cellulose Ether and Expanded Perlite

Hydration heat effect of cement pastes and mechanism of hydroxypropyl methyl cellulose ether （HPMC） and expanded perlite in cement pastes were studied by means of hydration exothermic rate, hydration heat amount, FTIR and TG-DTG. The results show that HPMC can significantly delay the hydration induction period and acceleration period of cement pastes. As mixing amount increased, hydration induction period of cement pastes enlarged and accelerated period gradually went back. At the same time, the amount of hydration heat gradually decreased. Expanded perlite had worse delay effects and less change of hydration heat amount of cement pastes than HPMC. HPMC changed the structure of C-S-H during cement hydration. The more amount of HPMC, the more obvious effect. However, EXP had little influence on the structure of C-S-H. At the same age, the content of Ca （OH）2 in cement pastes gradually decreased as the mixing amount increase of HPMC and expanded perlite, and had better delay effect than that single-doped with HPMC or expanded perlite when HPMC and expanded nerlite were both dooed in cement pastes.