Circulation Pattern Controls of Summer Temperature Anomalies in Southern Africa

This study investigates the relationship between circulation patterns and austral summer temperature anomalies in southern Africa. The results show that the formation of continental lows tends to increase the thickness of the lower atmosphere. Further, the distinct variabilities of high and low pressure under the circulation types, influence air mass advection from the adjacent oceans, as well as atmospheric stability over land. Stronger anticyclonic circulation at the western branch of the Mascarene high-pressure system enhances the low-level cold air advection by southeast winds,decreases the thickness, and lowers the temperature over a majority of the land in southern Africa. Conversely, a weaker Mascarene High, coupled with enhanced cyclonic activity in the southwest Indian Ocean increases low-level warm air advection and increases temperature anomalies over vast regions in southern Africa. The ridging of a closed South Atlantic anticyclone at the southern coast of southern Africa results in colder temperatures near the tip of southern Africa due to enhanced low-level cold air advection by southeast winds. However, when the ridge is weak and westerly winds dominate the southern coast of southern Africa, these areas experience temperature increases. The northward track of the Southern Hemisphere mid-latitude cyclone, which can be linked to the negative Southern Annular Mode, reduces the temperature in the southwestern part of southern Africa. Also, during the analysis period, El Ni?o was associated with temperature increases over the central parts of southern Africa;while the positive Indian Ocean dipole was linked to a temperature increase over the northeastern, northwestern, and southwestern parts of southern Africa.

Advanced Functional Electromagnetic Shielding Materials:A Review Based on Micro‑Nano Structure Interface Control of Biomass Cell Walls

Research efforts on electromagnetic interference(EMI)shielding materials have begun to converge on green and sustainable biomass materials.These materials offer numerous advantages such as being lightweight,porous,and hierarchical.Due to their porous nature,interfacial compatibility,and electrical conductivity,biomass materials hold significant potential as EMI shielding materials.Despite concerted efforts on the EMI shielding of biomass materials have been reported,this research area is still relatively new compared to traditional EMI shielding materials.In particular,a more comprehensive study and summary of the factors influencing biomass EMI shielding materials including the pore structure adjustment,preparation process,and micro-control would be valuable.The preparation methods and characteristics of wood,bamboo,cellulose and lignin in EMI shielding field are critically discussed in this paper,and similar biomass EMI materials are summarized and analyzed.The composite methods and fillers of various biomass materials were reviewed.this paper also highlights the mechanism of EMI shielding as well as existing prospects and challenges for development trends in this field.

Passive activity enhances residual control ability in patients with complete spinal cord injury

Patients with complete spinal cord injury retain the potential for volitional muscle activity in muscles located below the spinal injury level.However,because of prolonged inactivity,initial attempts to activate these muscles may not effectively engage any of the remaining neurons in the descending pathway.A previous study unexpectedly found that a brief clinical round of passive activity significantly increased volitional muscle activation,as measured by surface electromyography.In this study,we further explored the effect of passive activity on surface electromyographic signals during volitional control tasks among individuals with complete spinal cord injury.Eleven patients with chronic complete thoracic spinal cord injury were recruited.Surface electromyography data from eight major leg muscles were acquired and compared before and after the passive activity protocol.The results indicated that the passive activity led to an increased number of activated volitional muscles and an increased frequency of activation.Although the cumulative root mean square of surface electromyography amplitude for volitional control of movement showed a slight increase after passive activity,the difference was not statistically significant.These findings suggest that brief passive activity may enhance the ability to initiate volitional muscle activity during surface electromyography tasks and underscore the potential of passive activity for improving residual motor control among patients with motor complete spinal cord injury.

A matrix metalloproteinase-responsive hydrogel system controls angiogenic peptide release for repair of cerebral ischemia/reperfusion injury

Vascular endothelial growth factor and its mimic peptide KLTWQELYQLKYKGI(QK)are widely used as the most potent angiogenic factors for the treatment of multiple ischemic diseases.However,conventional topical drug delivery often results in a burst release of the drug,leading to transient retention(inefficacy)and undesirable diffusion(toxicity)in vivo.Therefore,a drug delivery system that responds to changes in the microenvironment of tissue regeneration and controls vascular endothelial growth factor release is crucial to improve the treatment of ischemic stroke.Matrix metalloproteinase-2(MMP-2)is gradually upregulated after cerebral ischemia.Herein,vascular endothelial growth factor mimic peptide QK was self-assembled with MMP-2-cleaved peptide PLGLAG(TIMP)and customizable peptide amphiphilic(PA)molecules to construct nanofiber hydrogel PA-TIMP-QK.PA-TIMP-QK was found to control the delivery of QK by MMP-2 upregulation after cerebral ischemia/reperfusion and had a similar biological activity with vascular endothelial growth factor in vitro.The results indicated that PA-TIMP-QK promoted neuronal survival,restored local blood circulation,reduced blood-brain barrier permeability,and restored motor function.These findings suggest that the self-assembling nanofiber hydrogel PA-TIMP-QK may provide an intelligent drug delivery system that responds to the microenvironment and promotes regeneration and repair after cerebral ischemia/reperfusion injury.

Construction and Application of Soil Erosion Control and Circular Agriculture Mode in Hilly Red Soil of Southern China

[Objective] The paper was to construct soil erosion control and circular agriculture mode in hilly red soil of southern China, and analyze its application effort. [Method] The cause of soil erosion in hilly red soil of southern China and the reason for long-term treatment without remarkable effort were analyzed. On this basis, the key technology, economic benefit, ecological service function and carbon sequestration sink enhancement effect of various modes were further analyzed. [Result] The basic idea for comprehensive control of hilly soil erosion in southern China was as follows: the control of soil erosion was combined with modern agricultural production, in order to build "fruit(tea)-grass-livestock-methane" circular agriculture mode with comprehensive control of soil erosion; application effect analysis showed that the establishment of circular agriculture mode in southern hilly area to control soil erosion had remarkable effect, which could simultaneously meet the coordinated development of ecological, economic and social benefits. [Conclusion] This study established an effective mode suitable for soil erosion control and agricultural protection development in southern red soil mountain, which could drive the sustainable development of ecological restoration of mountainous area and rural agricultural economy.

Geological Controls on the CBM Productivity of No.15 Coal Seam of Carboniferous–Permian Taiyuan Formation in Southern Qinshui Basin and Prediction for CBM High-yield Potential Regions

Coalbed methane(CBM) resources in No.15 coal seam of Taiyuan Formation account for 55% of the total CBM resources in southern Qinshui Basin(SQB), and have a great production potential. This study aims at investigating the CBM production in No.15 coal seam and its influence factors. Based on a series of laboratory experiments and latest exploration and development data from local coal mines and CBM companies, the spatial characteristics of gas production of No.15 coal seam were analyzed and then the influences of seven factors on the gas productivity of this coal seam were discussed, including coal thickness, burial depth, gas content, ratio of critical desorption pressure to original coal reservoir pressure(RCPOP), porosity, permeability, and hydrogeological condition. The influences of hydrological condition on CBM production were analyzed based on the discussions of four aspects: hydrogeochemistry, roof lithology and its distribution, hydrodynamic field of groundwater, and recharge rate of groundwater. Finally, a three-level analytic hierarchy process(AHP) evaluation model was proposed for predicting the CBM potentials of the No.15 coal seam in the SQB. The best prospective target area for CBM production of the No.15 coal seam is predicted to be in the districts of Panzhuang, Chengzhuang and south of Hudi.

Phytoplankton communities and its controlling factors in summer and autumn in the southern Yellow Sea, China

The phytoplankton water samples were collected in two multidisciplinary investigations which were carried out during summer（June） and autumn（November to December） of 2011. Phytoplankton species composition and abundance data were accomplished by Uterm？hl method. The phytoplankton community was dominated by diatoms and dinoflagellates in the southern Yellow Sea（YS） in summer and autumn. In summer, Paralia sulcata and Prorocentrum dentatum were the predominated species, the cell abundance ranged from 0.074 to 107.733×103 cells/L with an average of 9.057×103 cells/L. Two phytoplankton high abundance appeared in northwest part of the survey area and the Changjiang River Estuary, respectively. In autumn, Par. sulcata became the predominant species, and the phytoplankton cell abundance ranged from 1.035×103 to 8.985×103 cells/L, the average was 3.263×103 cells/L. The phytoplankton abundance in surface layer presented the homogeneous distributions. Canonical Correspondence Analysis（CCA） method was applied for discovering the relationship between environmental factors and the common found phytoplankton species. The responses of phytoplankton to nutrients were varied between summer and autumn. The abundance of most predominant species, Par. sulcata was strongly correlated to temperature and salinity in autumn, but not the case in summer.

Simulation for the Controlling Factors of Structural Deformation in the Southern Margin of the Junggar Basin

According to the differences of structural deformation characteristics, the southern margin of the Junggar basin can be divided into two segments from east to west. Arcnate thrust-and-fold belts that protrude to the north are developed in the eastern segment. There are three rows of en echelon thrust-and-fold belts in the western segment. Thrust and fold structures of basement-involved styles are developed in the first row, and decollement fold structures are formed from the second row to the third row. In order to study the factors controlling the deformation of structures, sand-box experiments have been devised to simulate the evolution of plane and profile deformation. The planar simulation results indicate that the orthogonal compression coming from Bogeda Mountain and the oblique compression with an angle of 75° between the stress and the boundary originating from North Tianshan were responsible for the deformation differences between the eastern part and the western part. The Miquan-Uriimqi fault in the basement is the pre-existing condition for generating fragments from east to west. The profile simulation results show that the main factors controlling the deformation in the eastern part are related to the decollement of Jurassic coal beds alone, while those controlling the deformation in the western segment are related to both the Jurassic coal beds and the Eogene clay beds. The total amount of shortening from the Yaomoshan anticline to the Gumudi anticline in the eastern part is -19.57 km as estimated from the simulation results, and the shortening rate is about 36.46%; that from the Qingshuihe anticline to the Anjihai anticline in the western part is -22.01 km as estimated by the simulation results, with a shortening rate of about 32.48%. These estimated values obtained from the model results are very close to the values calculated by means of the balanced cross section.

Temporal variation of soil carbon stock and its controlling factors over the last two decades on the southern Song-nen Plain,Heilongjiang Province

Against the current background of global climate change, the study of variations in the soil carbon pool and its controlling factors may aid in the evaluation of soil＇s role in the mitigation or enhancement of greenhouse gas. This paper studies spatial and temporal variation in the soil carbon pool and their controlling factors in the southern Song-nen Plain in Heilongjiang Province, using soil data collected over two distinct periods by the Multi-purpose Regional Geochemical Survey in 2005-2007, and another soil survey conducted in 1982-1990. The study area is a carbon source of 1479 t/km2 and in the past 20 years, from the 1980s until 2005, the practical carbon emission from the soil was 0.12 Gt. Temperature, which has been found to be linearly correlated to soil organic carbon, is the domi- nant climatologic factor controlling soil organic carbon contents. Our study shows that in the relevant area and time period the potential loss of soil organic carbon caused by rising temperatures was 0.10 Gt, the potential soil carbon emission resulting from land-use change was 0.09 Gt, and the combined potential loss of soil carbon （0.19 Gt） caused by warming and land-use change is comparable to that of fossil fuel combustion （0.21 Gt）. Due to the time delay in soil carbon pool variation, there is still 0.07 Gt in the potential emission caused by warming and land-use change that will be gradually released in the future.

Coalbed Methane Enrichment Regularity and Major Control Factors in the Xishanyao Formation in the Western Part of the Southern Junggar Basin

There are abundant coal and coalbed methane(CBM)resources in the Xishanyao Formation in the western region of the southern Junggar Basin,and the prospects for CBM exploration and development are promising.To promote the exploration and development of the CBM resources of the Xishanyao Formation in this area,we studied previous coalfield survey data and CBM geological exploration data.Then,we analyzed the relationships between the gas content and methane concentration vs.coal seam thickness,burial depth,coal reservoir physical characteristics,hydrogeological conditions,and roof and floor lithology.In addition,we briefly discuss the main factors influencing CBM accumulation.First,we found that the coal strata of the Xishanyao Formation in the study area are relatively simple in structure,and the coal seam has a large thickness and burial depth,as well as moderately good roof and floor conditions.The hydrogeological conditions and coal reservoir physical characteristics are also conducive to the enrichment and a high yield of CBM.We believe that the preservation of CBM resources in the study area is mainly controlled by the structure,burial depth,and hydrogeological conditions.Furthermore,on the basis of the above results,the coal seam of the Xishanyao Formation in the synclinal shaft and buried at depths of 700-1000 m should be the first considered for development.

Controlling factors of marine shale gas differential enrichment in southern China

Based on the exploration and development practice of marine shale gas in Fuling, Weiyuan, Changning, Luzhou and Southeast Chongqing in southern China, combined with experiments and analysis, six factors controlling differential enrichment of marine shale gas are summarized as follows:(1) The more appropriate thermal evolution and the higher the abundance of organic matter, the higher the adsorption and total gas content of shale will be.(2) Kerogen pyrolysis and liquid hydrocarbon cracking provide most of the marine shale gas.(3) The specific surface area and pore volume of organic matter rich shale increased first and then decreased with the increase of thermal evolution degree of organic shale. At Ro between 2.23% and 3.33%, the shale reservoirs are mainly oil-wet, which is conducive to the enrichment of shale gas.(4) The thicker the roof and floor, the higher the shale gas content. The longer the last tectonic uplift time and the greater the uplift amplitude, the greater the loss of shale gas will be.(5) The buried depth and dip angle of the stratum have different controlling and coupling effects on shale gas in different tectonic positions, resulting in two differential enrichment models of shale gas.(6) The effective and comprehensive matching of source, reservoir and preservation conditions determines the quality of shale gas accumulation. Good match of effective gas generating amount and time, moderate pore evolution and good preservation conditions in space and time is essential for the enrichment of shale gas.

Differential Hydrocarbon Accumulation Controlled by Structural Styles along the Southern and Northern Tianshan Thrust Belt

The Kuqa and the Southern Junggar foreland thrust belts, which lie to the southern and northern Tianshan, respectively, were formed under a strong compressional tectonic setting. Due to the differential propagation and deformation under the control of the décollement horizon, the structural deformation styles differ in the Kuqa and Southern Junggar thrust belts. Imbricated stacking is developed in the Kuqa thrust belt, forming a piggyback imbricated pattern of faulted anticline and fault-block structural assemblage dominated by salt structures. In contrast, wedge-shaped thrusts are developed in Southern Junggar, mainly forming vertical laminated patterns of multi-wedge-structure stacks strongly influenced by the décollement horizons. The different deformation patterns and structural styles of the north and south of Tian Shan control the contrasting characteristics of hydrocarbon accumulation in the foreland thrust belts of the Kuqa and the Southern Junggar thrust belts, including the variance in the hydrocarbon trap types, pathway systems and hydrocarbon-bearing horizons. Proven by the hydrocarbon accumulation research and exploration achievements, recent exploration targets should focus on sub-salt piggyback imbricated structural patterns in the Kuqa and the deep laminated patterns in the Southern Junggar thrust belt.

The Control Effect of Prevention and Control Technology Combination against Southern Rice Black-Streaked Dwarf Disease

Objective] This study aimed to explore a better prevention and control technology combination against southern rice black-streaked dwarf disease. [Method] The control effects of seed dressing, antiviral agents and fly net along with 25%pymetrozine against southern rice black streaked dwarf disease were determined. [Result] When the seeds were dressed with 60% imidacloprid （FS, 2 g a.i./kg）, and the rice seedlings were sprayed once with 25% pymetrozine （WP, 360 g/hm2） 10 d before the transplanting and sprayed twice with 30% Dufulin （WP, 800×） at three-leaf stage and 7 d after the transplanting respectively, the control efficiency reached 88.05%. When fly net and pesticides were applied simultaneously, the fly net was lifted and 25% pymetrozine （WP） was spayed once on the rice seedlings at six-leaf stage and the seedlings were hardened for 3 d and sprayed once with 25%pymetrozine （WP） 10 d after the transplanting, the control efficiency reached 80.50%. [Conclusion] Seed dressing or applying antiviral agents alone can not better control diseases. The southern rice black-streaked dwarf disease can be better con-trol ed by seed dressing, along with spraying of planthopper-kil ing agents at two-leaf stage, 3 d before the transplanting and 7 d after the transplanting, respectively. If condition al ow, fly net can be instal ed to achieve better control effect.

Geological characteristics and high production control factors of shale gas reservoirs in Silurian Longmaxi Formation, southern Sichuan Basin, SW China

Marine shale gas resources have great potential in the south of the Sichuan Basin in China.At present,the high-quality shale gas resources at depth of 2000–3500 m are under effective development,and strategic breakthroughs have been made in deeper shale gas resources at depth of 3500–4500 m.To promote the effective production of shale gas in this area,this study examines key factors controlling high shale gas production and presents the next exploration direction in the southern Sichuan Basin based on summarizing the geological understandings from the Lower Silurian Longmaxi Formation shale gas exploration combined with the latest results of geological evaluation.The results show that:(1)The relative sea depth in marine shelf sedimentary environment controls the development and distribution of reservoirs.In the relatively deep water area in deep-water shelf,grade-I reservoirs with a larger continuous thickness develop.The relative depth of sea in marine shelf sedimentary environment can be determined by redox conditions.The research shows that the uranium to thorium mass ratio greater than 1.25 indicates relatively deep water in anoxic reduction environment,and the uranium to thorium mass ratio of 0.75–1.25 indicates semi-deep water in weak reduction and weak oxidation environment,and the uranium to thorium mass ratio less than 0.75 indicates relatively shallow water in strong oxidation environment.(2)The propped fractures in shale reservoirs subject to fracturing treatment are generally 10–12 m high,if grade-I reservoirs are more than 10 m in continuous thickness,then all the propped section would be high-quality reserves;in this case,the longer the continuous thickness of penetrated grade-I reservoirs,the higher the production will be.(3)The shale gas reservoirs at 3500–4500 m depth in southern Sichuan are characterized by high formation pressure,high pressure coefficient,well preserved pores,good pore structure and high proportion of free gas,making them the most favorable new field for shale gas exploration;and the pressure coefficient greater than 1.2 is a necessary condition for shale gas wells to obtain high production.(4)High production wells in the deep shale gas reservoirs are those in areas where Long11-Long13 sub-beds are more than 10 m thick,with 1500 m long horizontal section,grade-I reservoirs penetration rate of over 90%,and fractured by dense cutting+high intensity sand injection+large displacement+large liquid volume.(5)The relatively deep-water area in the deep-water shelf and the area at depth of 3500–4500 m well overlap in the southern Sichuan,and the overlapping area is the most favorable shale gas exploration and development zones in the southern Sichuan in the future.With advancement in theory and technology,annual shale gas production in the southern Sichuan is expected to reach 450×108 m3.

Community capacity for sustainable community—based dengue prevention and control:study of a sub—district in Southern Thailand

Objective:To assess the level of community capacity for dengue prevention and control and to study household environments and larval indices in southern Thailand.Methods:A crosssectional survey was designed for the study,enrolling two communities with higher dengue incidence rate than the standard over the past five years.Data gathering was conducted by the dengue leader group(DLG),including 15 leaders and 15 non-leaders trained by the research team.The dengue community capacity assessment tool(DCCAT) for leaders(115 items.14 domains) and non-leaders(83 items,11 domains).Participants were selected by the DLG based on their communities’ dengue risk.In the low-dengue incidence(LDI) community,32 leaders and 177 non-leaders were selected;while in the high-dengue incidence(HDI) community,31 leaders and 199 non-leaders were chosen.Results:The leaders from the LDI and the HDI communities demonstrated high levels of dengue community-capacity(360.47±58.82,416.22±57.72). Non-leaders in the LDI community demonstrated a moderate level of dengue community capacity competence(205.90±60.76),while the non-leaders in the HDI community had a high level (254.78±50.34).Conclusions:These initial levels of dengue community capacity serves as a baseline for diagnosing each community.For a community that needed to improve its capacity, the DCCAT is essential tool to conduct a pre-post intervention assessment or a serial assessment. A participatory approach is taken to enable local communities to carry out anti-dengue efforts on their own,rather than have intervention by an outsider.

Function of controlled release fertilizer in maintaining high agronomic use efficiency and minimizing environmental pollution in rice field of southern China

Development and use of controlled release fertilizer (CRF) in southern China, potential advantages of CRF in increasing rice yield and nutrient use efficiency were introduced, as well as its role of minimizing rice field’s environmental contamination was discussed. Meanwhile, some suggestions were proposed.

Recent Progress in Reinforcement Learning and Adaptive Dynamic Programming for Advanced Control Applications

Reinforcement learning(RL) has roots in dynamic programming and it is called adaptive/approximate dynamic programming(ADP) within the control community. This paper reviews recent developments in ADP along with RL and its applications to various advanced control fields. First, the background of the development of ADP is described, emphasizing the significance of regulation and tracking control problems. Some effective offline and online algorithms for ADP/adaptive critic control are displayed, where the main results towards discrete-time systems and continuous-time systems are surveyed, respectively.Then, the research progress on adaptive critic control based on the event-triggered framework and under uncertain environment is discussed, respectively, where event-based design, robust stabilization, and game design are reviewed. Moreover, the extensions of ADP for addressing control problems under complex environment attract enormous attention. The ADP architecture is revisited under the perspective of data-driven and RL frameworks,showing how they promote ADP formulation significantly.Finally, several typical control applications with respect to RL and ADP are summarized, particularly in the fields of wastewater treatment processes and power systems, followed by some general prospects for future research. Overall, the comprehensive survey on ADP and RL for advanced control applications has d emonstrated its remarkable potential within the artificial intelligence era. In addition, it also plays a vital role in promoting environmental protection and industrial intelligence.

Geophysical Features of the Ore-Controlling Fault in the Chang'an Gold Deposit, Southern Yunnan Province

The Ailao Mountain is one of the most important metallogenic belts ofpolymetallic deposits in the Sanjiang region, southwestern China. Located in the southern segment of this metallogenic belt, the newly-discovered Chang＇an gold deposit is large in scale （Fig. 1A）, and has attracted much attention among geologists. The ore-hosted rocks in the district include the Late Ordovician Xiangyang Fm. sandstone and clastic rocks and the Early Silurian Kanglang Fm. dolomite. Affected by the multistage tectonic activities, stocks and dykes of lamprophyre, dolerite, syenite porphyry and orthoclasite are widely exposed, and the orebodies are in symbiosis with or crosscut the dyke rocks.

Analysis of the Ore-Controlling Structure of Ductile Shear Zone Type Gold Deposit in Southern Beishan Area, Gansu, Northwest China

The ductile shear zone-type gold deposit is a kind that both the ore-forming mechanism and ore-controlling factors are closely related to the ductile shear zone and its evolution. Ductile shear zone develops in Beishan area, Gansu of Northwest China, and develops especially well in the south belt. The controls of the ductile shear zone on gold deposits are as follows. （1） The regional distribution of gold deposits （and gold spots） is controlled by the ductile shear zone. （2） The ductile-brittle shear zone is formed in the evolution process of ductile shear zone and both are only ore-bearing structures and control the shape, attitude, scale, and distribution of mineralization zones and ore-bodies. （3） Compresso-shear ductile deformation results in that the main kind of gold mineralization is altered mylonite type and the main alteralization is metasomatic. （4） Ore-bearing fracture systems are mainly P-type ones, some D-type and R-type ones, but only individual R＇-type and T-type ones. （5） Dynamic differen- tiation and dynamic metamorphic hydrothermal solution resulting from ductile deformation is one of the sources of ore-forming fluid of gold mineralization, and this is identical with that ore-forming materials are mainly from metamorphic rocks, and ore-forming fluid is mainly composed of metamorphic water, and with the fluid inclusion and geo-chemical characteristics of the deposit. （6） There is a negative correlation between the gold abundance and susceptibility anlsotropy （P） of the altered mylonlte samples from the deposit, which shows that the gold mineralization is slightly later than the structural deformation. All above further expound the ore-forming model of the ductile shear zone type of gold deposits.

Occurrence Regularity and Ecological Control Technology of Diseases of Hedgerow Commonly Used in Greening in Five Cities of Southern Jiangsu

The disease types, symptom characteristics, pathogenesis and ecological control technology of hedgerow commonly used in landscape greening in Nanjing, Zhenjiang, Changzhou, Wuxi and Suzhou were systematically studied. The results showed that there were 10 kinds of common diseases of flowers and shrubs in landscape greening in five cities of southern Jiangsu. Among them, 8 were caused by deuteromycotina and 2 were caused by subphylum basidiomycetes. It was pointed out that the disease regularity was directly related to the pathogenic bacteria, temperature and humidity, microclimate and hedgerow growth. For the first time, the ecological control method of hedgerow disease which focused on ecological health maintenance was put forward.