Dongguan City, located in the Pearl River Delta economic zone of China, is famous for its rapid developing township-enterprises in the past 30 years. A total of 759 composite soil samples, including 606 surface soil s...Dongguan City, located in the Pearl River Delta economic zone of China, is famous for its rapid developing township-enterprises in the past 30 years. A total of 759 composite soil samples, including 606 surface soil samples and 153 deep soil samples, have been collected in the city. These samples have been analyzed for 13elements(Al, As, Cu, Cd, Co, Cr, Fe, Hg, Mn, Ni, Pb, Si,and Zn) and other parameters(p H values and organic matter) to evaluate the influence of anthropic activities on the soil environmental quality and to identify the spatial distribution of heavy metals and their possible sources. The results indicate that the average concentrations of heavy metals in soil were significantly lower than the threshold of the second grade of the Soil Environment Quality Standard in China(GB15618-1995) and the soil environmental quality in this area is comparatively good. But in comparison with local soil geochemical baseline values, As,Cd, Cu, Hg, Pb, and Zn have accumulated remarkably.Specifically, the average concentrations of As, Cd, Cu, and Hg in the small part samples of the west plain and central areas are higher than the national second-grade quality standard, indicating some level of contamination. Multivariate and geostatistical methods have been applied to differentiate the influences of natural processes and human activities on the concentration of heavy metals in surface soils in the study area. Cluster and factor analyses result in the grouping of Al, As, Cr, Cu, Fe, Ni, and Si into factor F1; Co, Mn, Pb, and Zn into F2; and Cd and Hg into F3.The spatial pattern of the three factors may be well demonstrated by geostatistical analysis. It is shown that the first factor could be considered as a natural source controlled by parent material. The second factor could be referred to as ‘‘industrial and traffic pollution sources' '. The source of the third factor is mainly controlled by long-term anthropic activities, including agricultural activities, fossil fuel consumption, and atmospheric deposition.展开更多
The experiential adjustment process in an experiment on the ion source of the neutral beam injector system for the HT-7 Tokamak is reported in this paper. With regard to the data obtained in the same condition, in arr...The experiential adjustment process in an experiment on the ion source of the neutral beam injector system for the HT-7 Tokamak is reported in this paper. With regard to the data obtained in the same condition, in arranging the arc current intensities of every shot with a decay rank, the distributions of the arc current intensity correspond to the power laws, and the distribution obtained in the condition with the cryo-pump corresponds to the double Pareto distribution. Using the similar study method, the distributions of the arc duration are close to the power laws too. These power law distributions are formed rather naturally instead of being the results of purposeful seeking.展开更多
In order to analyze the maximum power density error with different heat flux distribution parameter values for double ellipsoidal heat source model, a general expression of double ellipsoidal heat source model was der...In order to analyze the maximum power density error with different heat flux distribution parameter values for double ellipsoidal heat source model, a general expression of double ellipsoidal heat source model was derived .front Goldak double ellipsoidal heat source model, and the error of maximum power density was analyzed under this foundation. The calculation error of thermal cycling parameters caused by the maximum power density error was compared quantitatively by numerical simulation. The results show that for guarantee the accuracy of welding numerical simulation, it is better to introduce an error correction coefficient into the Goldak double ellipsoidal heat source model expression. And, heat flux distribution parameter should get higher value for the higher power density welding methods.展开更多
Magnitude and distance of major potential source are needed in order to determine duration time of artificial ground motion and to determine the type of response spectrum (near field or far field) when using the seism...Magnitude and distance of major potential source are needed in order to determine duration time of artificial ground motion and to determine the type of response spectrum (near field or far field) when using the seismic intensity zonation map. The magnitude probabilistic distribution function of seismic belt and the magnitude and space joint distribution function for given intensity of the site in a potential Source are provided. Then the basicformula of calculating expected magnitude and expected distance are developed. Several examples for calculating expected magnitude and expected distance in northern China are discussed. These results show that expected magnitude and expected distance are related not only to geometry of potential source and magnitude but also to the intensity of the site with certain exceeding probability.展开更多
The hydrodynamic analysis of a new semi-small waterplane area twin hull （SWATH） suitable for various applications such as small and medium size passenger ferries is presented. This may be an attractive crossover con...The hydrodynamic analysis of a new semi-small waterplane area twin hull （SWATH） suitable for various applications such as small and medium size passenger ferries is presented. This may be an attractive crossover configuration resulting from the merging of two classical shapes： a conventional SWATH and a fast catamaran. The final hull design exhibits a wedge-like waterline shape with the maximum beam at the stem; the hull ends with a very narrow entrance angle, has a prominent bulbous bow typical of SWATH vessels, and features full stern to arrange waterjet propellers. Our analysis aims to perform a preliminary assessment of the hydrodynamic performance of a hull with such a complex shape both in terms of resistance of the hull in calm water and seakeeping capability in regular head waves and compare the performance with that of a conventional SWATH. The analysis is performed using a boundary element method that was preliminarily validated on a conventional SWATH vessel.展开更多
An enhanced cell-killing effect at the penetra- tion depths around the Bragg peak of a β-delayed particle decay 9C-ion beam has been observed in our preceding ra- diobiological experiments in comparison with a therap...An enhanced cell-killing effect at the penetra- tion depths around the Bragg peak of a β-delayed particle decay 9C-ion beam has been observed in our preceding ra- diobiological experiments in comparison with a therapeutic 12C beam under the same conditions, and RBE values of the 9C beam were revealed to be higher than those of the comparative 12C beam by a factor of up to 2. This study is aimed at investigating the biophysical mechanisms underlying the important experimental phenomenon. First of all, a model for calculating the stopping probability density of the experimentally applied 9C beam is worked out, where all determinants such as the initial momentum spread of the 9C beam, the fluence attenuation with penetration depth due to the projectile-target nuclear reaction and the energy strag- gling effect are taken into account. On the basis of the calcu- lated 9C-ion stopping distribution, it has been found that the area corresponding to the enhanced cell-killing effect of the 9C beam appears at the stopping region of the incident 9C ions. The stopping 9C-ion density in depth, then, is derived from the calculated probability density. Moreover, taking entrance dose 1 Gy for the 9C beam as an example, the aver- age stopping 9C-ion numbers per cell at various depths are deduced. Meanwhile, the mean lethal damage events induced by the 9C and comparative 12C beams at the depths with al- most equal dose-averaged LETs are derived from the meas- ured cell surviving fractions at these depths for the 9C and 12C beams. Under the condition of the same absorbed doses, there are indeed good agreements between the average stop- ping 9C-ion number pre cell and the difference of the mean lethal damage events between the 9C and 12C beams at the depths of similar dose-averaged LETs. It can be inferred that if a 9C ion comes to rest in a cell, the cell would undergo dy- ing. In view of the decay property of 9C nuclide, clustered damage would be caused in the cell by the emitted low-energy particles. Therefore, the results achieved in this work can be taken as indirect evidence supporting that damage cluster is more efficient in leading to cell lethality.展开更多
Based on advantages of technology of distributive fiber-optic temperature sensing and specific to its applications in monitoring mine conflagration, the corresponding Processes such as connection arrangement, signal t...Based on advantages of technology of distributive fiber-optic temperature sensing and specific to its applications in monitoring mine conflagration, the corresponding Processes such as connection arrangement, signal transmission and monitoring were illustrated. As applied in Sitai Coal Mine of Datong Coal Mine Group Co., this method is effective and accurate and could provide reliable gist for monitoring spontaneous combustion in gob area of mines.展开更多
基金supported by the China Geological Survey Project (1212010511216)Environmental Protection Special Foundation of Guangdong Provincial (Guangdong Environment [2014]126)
文摘Dongguan City, located in the Pearl River Delta economic zone of China, is famous for its rapid developing township-enterprises in the past 30 years. A total of 759 composite soil samples, including 606 surface soil samples and 153 deep soil samples, have been collected in the city. These samples have been analyzed for 13elements(Al, As, Cu, Cd, Co, Cr, Fe, Hg, Mn, Ni, Pb, Si,and Zn) and other parameters(p H values and organic matter) to evaluate the influence of anthropic activities on the soil environmental quality and to identify the spatial distribution of heavy metals and their possible sources. The results indicate that the average concentrations of heavy metals in soil were significantly lower than the threshold of the second grade of the Soil Environment Quality Standard in China(GB15618-1995) and the soil environmental quality in this area is comparatively good. But in comparison with local soil geochemical baseline values, As,Cd, Cu, Hg, Pb, and Zn have accumulated remarkably.Specifically, the average concentrations of As, Cd, Cu, and Hg in the small part samples of the west plain and central areas are higher than the national second-grade quality standard, indicating some level of contamination. Multivariate and geostatistical methods have been applied to differentiate the influences of natural processes and human activities on the concentration of heavy metals in surface soils in the study area. Cluster and factor analyses result in the grouping of Al, As, Cr, Cu, Fe, Ni, and Si into factor F1; Co, Mn, Pb, and Zn into F2; and Cd and Hg into F3.The spatial pattern of the three factors may be well demonstrated by geostatistical analysis. It is shown that the first factor could be considered as a natural source controlled by parent material. The second factor could be referred to as ‘‘industrial and traffic pollution sources' '. The source of the third factor is mainly controlled by long-term anthropic activities, including agricultural activities, fossil fuel consumption, and atmospheric deposition.
基金Meg-science Engineering Project of the Chinese Academy of Sciences
文摘The experiential adjustment process in an experiment on the ion source of the neutral beam injector system for the HT-7 Tokamak is reported in this paper. With regard to the data obtained in the same condition, in arranging the arc current intensities of every shot with a decay rank, the distributions of the arc current intensity correspond to the power laws, and the distribution obtained in the condition with the cryo-pump corresponds to the double Pareto distribution. Using the similar study method, the distributions of the arc duration are close to the power laws too. These power law distributions are formed rather naturally instead of being the results of purposeful seeking.
文摘In order to analyze the maximum power density error with different heat flux distribution parameter values for double ellipsoidal heat source model, a general expression of double ellipsoidal heat source model was derived .front Goldak double ellipsoidal heat source model, and the error of maximum power density was analyzed under this foundation. The calculation error of thermal cycling parameters caused by the maximum power density error was compared quantitatively by numerical simulation. The results show that for guarantee the accuracy of welding numerical simulation, it is better to introduce an error correction coefficient into the Goldak double ellipsoidal heat source model expression. And, heat flux distribution parameter should get higher value for the higher power density welding methods.
文摘Magnitude and distance of major potential source are needed in order to determine duration time of artificial ground motion and to determine the type of response spectrum (near field or far field) when using the seismic intensity zonation map. The magnitude probabilistic distribution function of seismic belt and the magnitude and space joint distribution function for given intensity of the site in a potential Source are provided. Then the basicformula of calculating expected magnitude and expected distance are developed. Several examples for calculating expected magnitude and expected distance in northern China are discussed. These results show that expected magnitude and expected distance are related not only to geometry of potential source and magnitude but also to the intensity of the site with certain exceeding probability.
文摘The hydrodynamic analysis of a new semi-small waterplane area twin hull （SWATH） suitable for various applications such as small and medium size passenger ferries is presented. This may be an attractive crossover configuration resulting from the merging of two classical shapes： a conventional SWATH and a fast catamaran. The final hull design exhibits a wedge-like waterline shape with the maximum beam at the stem; the hull ends with a very narrow entrance angle, has a prominent bulbous bow typical of SWATH vessels, and features full stern to arrange waterjet propellers. Our analysis aims to perform a preliminary assessment of the hydrodynamic performance of a hull with such a complex shape both in terms of resistance of the hull in calm water and seakeeping capability in regular head waves and compare the performance with that of a conventional SWATH. The analysis is performed using a boundary element method that was preliminarily validated on a conventional SWATH vessel.
基金supported by the Century Program of the Chinese Academy of Sciencesthe National Natural Science Foundation of China(Grant No.10205021)
文摘An enhanced cell-killing effect at the penetra- tion depths around the Bragg peak of a β-delayed particle decay 9C-ion beam has been observed in our preceding ra- diobiological experiments in comparison with a therapeutic 12C beam under the same conditions, and RBE values of the 9C beam were revealed to be higher than those of the comparative 12C beam by a factor of up to 2. This study is aimed at investigating the biophysical mechanisms underlying the important experimental phenomenon. First of all, a model for calculating the stopping probability density of the experimentally applied 9C beam is worked out, where all determinants such as the initial momentum spread of the 9C beam, the fluence attenuation with penetration depth due to the projectile-target nuclear reaction and the energy strag- gling effect are taken into account. On the basis of the calcu- lated 9C-ion stopping distribution, it has been found that the area corresponding to the enhanced cell-killing effect of the 9C beam appears at the stopping region of the incident 9C ions. The stopping 9C-ion density in depth, then, is derived from the calculated probability density. Moreover, taking entrance dose 1 Gy for the 9C beam as an example, the aver- age stopping 9C-ion numbers per cell at various depths are deduced. Meanwhile, the mean lethal damage events induced by the 9C and comparative 12C beams at the depths with al- most equal dose-averaged LETs are derived from the meas- ured cell surviving fractions at these depths for the 9C and 12C beams. Under the condition of the same absorbed doses, there are indeed good agreements between the average stop- ping 9C-ion number pre cell and the difference of the mean lethal damage events between the 9C and 12C beams at the depths of similar dose-averaged LETs. It can be inferred that if a 9C ion comes to rest in a cell, the cell would undergo dy- ing. In view of the decay property of 9C nuclide, clustered damage would be caused in the cell by the emitted low-energy particles. Therefore, the results achieved in this work can be taken as indirect evidence supporting that damage cluster is more efficient in leading to cell lethality.
基金Supported by the National Natural Science Foundation of China （50375026,50375028）
文摘Based on advantages of technology of distributive fiber-optic temperature sensing and specific to its applications in monitoring mine conflagration, the corresponding Processes such as connection arrangement, signal transmission and monitoring were illustrated. As applied in Sitai Coal Mine of Datong Coal Mine Group Co., this method is effective and accurate and could provide reliable gist for monitoring spontaneous combustion in gob area of mines.
