A new production component method for natural gas development planning

Based on an analysis of the limitations of conventional production component methods for natural gas development planning,this study proposes a new one that uses life cycle models for the trend fitting and prediction of production.In this new method,the annual production of old and new wells is predicted by year first and then is summed up to yield the production for the planning period.It shows that the changes in the production of old wells in old blocks can be fitted and predicted using the vapor pressure model(VPM),with precision of 80%e95%,which is 6.6%e13.2%higher than that of other life cycle models.Furthermore,a new production prediction process and method for new wells have been established based on this life cycle model to predict the production of medium-to-shallow gas reservoirs in western Sichuan Basin,with predication error of production rate in 2021 and 2022 being 6%and 3%respectively.The new method can be used to guide the medium-and long-term planning or annual scheme preparation for gas development.It is also applicable to planning for large single gas blocks that require continuous infill drilling and adjustment to improve gas recovery.

Effects of Milling Methods on Rice Flour Properties and Rice Product Quality:A Review

High-quality rice flour is the foundation for the production of various rice-based products.Milling is an essential step in obtaining rice flour,during which significant changes occur in the physicochemical and quality characteristics of the flour.Although rice flour obtained through mainstream wet milling methods exhibits superior quality,low production efficiency and wastewater discharge limit the development of the industry.Dry milling,on the other hand,conserves water resources,but adversely affects flour performance due to excessive heat generation.As an emerging powder-making technique,semi-dry milling offers a promising solution by enhancing flour quality and reducing environmental impact.This is achieved by minimizing soaking time through hot air treatment while reducing mechanical energy consumption to reach saturated water absorption levels.However,continuous production remains a challenge.This comprehensive review summarizes the effects of various milling technologies on rice flour properties and product qualities.It also discusses key control indicators and technical considerations for rice flour processing equipment and processes.

Evaluation of the Shallow Gas Hydrate Production Based on the Radial Drilling-Heat Injection-Back Fill Method

It has been evidenced that shallow gas hydrate resources are abundant in deep oceans worldwide.Their geological back-ground,occurrence,and other characteristics differ significantly from deep-seated hydrates.Because of the high risk of well construction and low production efficiency,they are difficult to be recovered by using conventional oil production methods.As a result,this paper proposes an alternative design based on a combination of radial drilling,heat injection,and backfilling methods.Multi-branch holes are used to penetrate shallow gas hydrate reservoirs to expand the depressurization area,and heat injection is utilized as a supplement to improve gas production.Geotechnical information collected from an investigation site close to the offshore production well in the South China Sea is used to assess the essential components of this plan,including well construction stability and gas production behavior.It demonstrates that the hydraulic fracturing of the 60mbsf overburden layer can be prevented by regulating the drilling fluid densities.However,the traditional well structure is unstable,and the suction anchor is advised for better mechanical performance.The gas produc-tion rate can be significantly increased by combining hot water injection and depressurization methods.Additionally,the suitable produc-tion equipment already in use is discussed.

The Estimation Methods for Agricultural Surplus Labor Based on Stochastic Frontier Production Function

The existing calculation methods for the number of agricultural surplus labor have a common flaw,that is,they can not reflect the impact of technical efficiency changes in agricultural production on the surplus labor. Based on the basic principle of stochastic frontier production function,this paper calculates the agricultural production technical efficiency of various provinces,and selects the province with the highest technical efficiency to assume that its agricultural labor is fully utilized,and there is no agricultural surplus labor. With the ratio of agricultural labor number to agricultural output value in this province as a reference,this paper calculates the number of agricultural surplus labor in other provinces. This calculation method makes up for the shortcomings of the existing calculation methods; it reflects the relationship between the number of agricultural surplus labor and production technical efficiency.

Unveiling the chemistry behind the electrolytic production of hydrogen peroxide by oxygenated carbon

Oxygenated carbon materials exhibit outstanding electrocatalytic performance in the production of hydrogen peroxide(H2O2)through a two-electron oxygen reduction reaction.The nature of the active functional group and underlying reaction mechanism,however,remain unclear.Here,a comprehensive workflow was established to identify the active sites from the numerous possible structures.The common hydroxyl group at the notched edge demonstrates a key role in the two-electron process.The local chemical environment weakens the binding of OOH intermediate to substrate while enhancing interaction with solution,thereby promoting the H_(2)O_(2)production.With increasing pH,the intramolecular hydrogen bond between OOH intermediate and hydroxyl decreases,facilitating OOH desorption.Furthermore,the rise in selectivity with increasing potential stems from the suppression of the four-electron process.The active site was further validated through experiments.Guided by theoretical understanding,optimal performance was achieved with high selectivity(>95%)and current density(2.06 mA/cm^(2))in experiment.

Rapid diagnostic method for transplutonium isotope production in high flux reactors

Transplutonium isotopes are scarce and need to be produced by irradiation in high flux reactors.However,their production is inefficient,and optimization studies are necessary.This study analyzes the physical nature of transplutonium isotope produc-tion using ^(252)Cf,^(244)Cm,^(242)Cm,and ^(238)Pu as examples.Traditional methods based on the Monte Carlo burnup calculation have the limitations of many calculations and cannot analyze the individual energy intervals in detail;thus,they cannot sup-port the refined evaluation,screening,and optimization of the irradiation schemes.After understanding the physical nature and simplifying the complexity of the production process,we propose a rapid diagnostic method for evaluating radiation schemes based on the concepts“single energy interval value(SEIV)”and“energy spectrum total value(ESTV)”.The rapid diagnostic method not only avoids tedious burnup calculations,but also provides a direction for optimization.The optimal irradiation schemes for producing ^(252)Cf,^(244)Cm,^(242)Cm,and ^(238)Pu are determined based on a rapid diagnostic method.Optimal irradiation schemes can significantly improve production efficiency.Compared with the initial scheme,the optimal scheme improved the production efficiency of ^(238)Pu by 7.41 times;^(242)Cm,11.98 times;^(244)Cm,65.20 times;and ^(252)Cf,15.08 times.Thus,a refined analysis of transplutonium isotope production is conducted and provides a theoretical basis for improving production efficiency.

A systematic machine learning method for reservoir identification and production prediction

Reservoir identification and production prediction are two of the most important tasks in petroleum exploration and development.Machine learning(ML)methods are used for petroleum-related studies,but have not been applied to reservoir identification and production prediction based on reservoir identification.Production forecasting studies are typically based on overall reservoir thickness and lack accuracy when reservoirs contain a water or dry layer without oil production.In this paper,a systematic ML method was developed using classification models for reservoir identification,and regression models for production prediction.The production models are based on the reservoir identification results.To realize the reservoir identification,seven optimized ML methods were used:four typical single ML methods and three ensemble ML methods.These methods classify the reservoir into five types of layers:water,dry and three levels of oil(I oil layer,II oil layer,III oil layer).The validation and test results of these seven optimized ML methods suggest the three ensemble methods perform better than the four single ML methods in reservoir identification.The XGBoost produced the model with the highest accuracy;up to 99%.The effective thickness of I and II oil layers determined during the reservoir identification was fed into the models for predicting production.Effective thickness considers the distribution of the water and the oil resulting in a more reasonable production prediction compared to predictions based on the overall reservoir thickness.To validate the superiority of the ML methods,reference models using overall reservoir thickness were built for comparison.The models based on effective thickness outperformed the reference models in every evaluation metric.The prediction accuracy of the ML models using effective thickness were 10%higher than that of reference model.Without the personal error or data distortion existing in traditional methods,this novel system realizes rapid analysis of data while reducing the time required to resolve reservoir classification and production prediction challenges.The ML models using the effective thickness obtained from reservoir identification were more accurate when predicting oil production compared to previous studies which use overall reservoir thickness.

Hu Foods and Production Methods in Qimin Yaoshu( Important Arts for the People's Welfare)

Qimin Yaoshu( Important Arts for the People's Welfare) made a detailed record of the diet and its production methods in the middle and lower reaches of the Yellow River during the Wei Dynasty.Hu foods are important parts in the book.Hu foods recorded in Important Arts for the People's Welfare mainly include cheese products,cake products,and dish products.These contents not only reflect the exchange of diet culture between different nationalities in the middle and lower reaches of the Yellow River during this period,but also reflect the breadth and depth of ethnic exchanges and integration in this period.

Geographical Indication Characteristics,Unique Production Methods and Industrial Development Measures of Zhuanbu Strawberry

This article describes the geographical indication characteristics of Zhuanbu strawberry,a special product of Yinan County,Shandong Province,a national geographical indication agricultural product,including specific production area,unique production environment,rich human history and unique product quality,summarizes the unique production method of Zhuanbu strawberry from selection of production area and varieties,production management,timely harvesting and other aspects,and puts forward corresponding industrial development measures,in order to maintain the brand of Zhuanbu strawberry to the greatest extent and further improve the brand awareness and market competitiveness of Zhuanbu strawberry.

Efficient production optimization for naturally fractured reservoir using EDFM

Naturally fractured reservoirs make important contributions to global oil and gas reserves and production.The modeling and simulation of naturally fractured reservoirs are different from conventional reservoirs as the existence of natural fractures.To address the development optimization problem of naturally fractured reservoirs,we propose an optimization workflow by coupling the optimization methods with the embedded discrete fracture model(EDFM).Firstly,the effective and superior performance of the workflow is verified based on the conceptual model.The stochastic simplex approximate gradient(StoSAG)algorithm,the ensemble optimization(EnOpt)algorithm,and the particle swarm optimization(PSO)algorithm are implemented for the production optimization of naturally fractured reservoirs based on the improved versions of the Egg model and the PUNQ-S3 model.The results of the two cases demonstrate the effectiveness of this optimization workflow by finding the optimal well controls which yield the maximum net present value(NPV).Compared to the initial well control guess,the final NPV obtained from the production optimization of fractured reservoirs based on all three optimization algorithms is significantly enhanced.Compared with the optimization results of the PSO algorithm,StoSAG and EnOpt have significant advantages in terms of final NPV and computational efficiency.The results also show that fractures have a significant impact on reservoir production.The economic efficiency of fractured reservoir development can be significantly improved by the optimization workflow.

Uncertain Multidisciplinary Design Optimization on Next Generation Subsea Production System by Using Surrogate Model and Interval Method

The innovative Next Generation Subsea Production System(NextGen SPS)concept is a newly proposed petroleum development solution in ultra-deep water areas.The definition of NextGen SPS involves several disciplines,which makes the design process difficult.In this paper,the definition of NextGen SPS is modeled as an uncertain multidisciplinary design optimization(MDO)problem.The deterministic optimization model is formulated,and three concerning disciplines—cost calculation,hydrodynamic analysis and global performance analysis are presented.Surrogate model technique is applied in the latter two disciplines.Collaborative optimization(CO)architecture is utilized to organize the concerning disciplines.A deterministic CO framework with two disciplinelevel optimizations is proposed firstly.Then the uncertainties of design parameters and surrogate models are incorporated by using interval method,and uncertain CO frameworks with triple loop and double loop optimization structure are established respectively.The optimization results illustrate that,although the deterministic MDO result achieves higher reduction in objective function than the uncertain MDO result,the latter is more reliable than the former.

An improved data space inversion method to predict reservoir state fields via observed production data

A data-space inversion(DSI)method has been recently proposed and successfully applied to the history matching and production prediction of reservoirs.Based on Bayesian theory,DSI can directly and effectively obtain good posterior flow predictions without inversion of geological parameters of reservoir model.This paper presents an improved DSI method to fast predict reservoir state fields(e.g.saturation and pressure profiles)via observed production data.Firstly,a large number of production curves and state data are generated by reservoir model simulation to expand the data space of original DSI.Then,efficient history matching only on the observed production data is carried out via the original DSI to obtain related parameters which reflects the weight of the real reservoir model relative to prior reservoir models.Finally,those parameters are used to predict the oil saturation and pressure profiles of the real reservoir model by combining large amounts of state data of prior reservoir models.Two examples including conventional heterogeneous and unconventional fractured reservoir are implemented to test the performances of predicting saturation and pressure profiles of this improved DSI method.Besides,this method is also tested in a real field and the obtained results show the high computational efficiency and high accuracy of the practical application of this method.

Lateral bearing characteristics of subsea wellhead assembly in the hydrate trial production engineering

Conductor and suction anchor are the key equipment providing bearing capacity in the field of deep-water drilling or offshore engineering,which have the advantages of high operation efficiency and short construction period.In order to drill a horizontal well in the shallow hydrate reservoir in the deep water,the suction anchor wellhead assembly is employed to undertake the main vertical bearing capacity in the second round of hydrate trial production project,so as to reduce the conductor running depth and heighten the kick-off point position.However,the deformation law of the deep-water suction anchor wellhead assembly under the moving load of the riser is not clear,and it is necessary to understand the lateral bearing characteristics to guide the design of its structural scheme.Based on 3D solid finite element method,the solid finite element model of the suction anchor wellhead assembly is established.In the model,the seabed soil is divided into seven layers,the contact between the wellhead assembly and the soil is simulated,and the vertical load and bending moment are applied to the wellhead node to simulate the riser movement when working in the deep water.The lateral bearing stability of conventional wellhead assembly and suction anchor wellhead assembly under the influence of wellhead load is discussed.The analysis results show that the bending moment is the main factor affecting the lateral deformation of the wellhead string;the anti-bending performance from increasing the outer conductor diameter is better than that from increasing the conductor wall thickness;for the subsea wellhead,the suction anchor obviously improves the lateral bearing capacity and reduces the lateral deformation.The conduct of the suction anchor wellhead assembly still needs to be lowered to a certain depth that below the maximum disturbed depth to ensure the lateral bearing stability,Thus,a method for the minimum conductor running depth for the suction anchor wellhead assembly is developed.The field implementations show that compared with the first round of hydrate trial production project,the conductor running depth is increased by 9.42 m,and there is no risk of wellhead overturning during the trial production.The method for determining the minimum conductor running depth in this paper is feasible and will still play an important role in the subsequent hydrate exploration and development.

LOCAL SALINE APPROXIMATION METHODS FOR SINGULAR PRODUCT INTEGRATION

The purpose of this paper is to propose and study local spline approximation methods for singular product integration,for which;i)the precision degree is the highest possible using splint approximation; ii) the nodes fan be assumed equal to arbitrary points,where the integrand function f is known; iii) the number of the requested evaluations of f at the nodes is low,iv) a satisfactory convergence theory can be proved.

Efficient Frontier via Production Functions and Mechanization

This study attempts to reconcile data envelopment analysis (DEA) with the production function approach in economics. We examine not only the inputs of capital and labor, but also the ranges of these inputs in production process steps, and endogenously derive a Leontief production function. The Leontief production functions shift northeasterly owing to mechanization, which is the replacement of labor inputs by capital inputs in some steps. Consequently, we describe the efficient frontier as the convex hull of the Leontief production functions. Furthermore, we consider the possibility of efficient production below the efficient frontier.

Research Progress on Detection Methods of Melamine and Cyanuric Acid Residue in Dairy Products and Feedstuff

[Objective] More accurate, rapid and sensitive method of melamine and cyanuricacid residue in dairy products and feedstuff were re- viewed. [ Method] Physicochemical properties, metabolism, uses, harm and detection methods of melamine and cyanuric acid were analyzed and described. [ Result] Melamine and cyanuric acid, when used alone, were slightly toxic, but long -term intake could lead to animal reproductive and urinary system damage. [ Condusion] Establishing a more sensitive, fast and easy to popularize detection method for elarnine and cyanuricacid res- idue in dairy products and feedstuff was necessary.

The Interaction Effects of the Parameters on Optimization Design in Paper Production Waste Usage on Alkali-Activated Slag with Taguchi Method

The paper investigates the second-order interactions of parameters in an alkali-activated mixture of paper production waste(PPW)and blast furnace slag(BFS)in Taguchi method.The PPW including lime mud(LM)and paper sludge(PS).This paper provides the experimental models to assess the compressive and flexural strength of them at 7-day and 28-day.The results have shown that the second-order interactions between PPW and alkali-activated activator exists in each experimental model,and the significant interactions affect the selection of optimal compositions.Compared with the interactions between the PPW themselves,the interactions between PPW and alkali-activated parameters are the main significant factors affecting its physical properties.In each experimental model,the maximum compressive strength was 47.41 MPa in 7-day and 65.64 MPa in 28-day.Compared with the confirmatory experiments,the deviation of prediction calculated by experimental models was 3.08%and 0.56%,respectively.The maximum flexural strength was 5.74 MPa in 7-day and 5.96 MPa in 28-day;compared with the confirmatory experiments,the deviation of prediction calculated by experimental models was 5.40%and 0.17%.Considering the influence of circular materials,30%of PPW should be a suitable ratio to replace BFS as the raw material of alkali-activated slag(AAS).

Bacterial Groups Concerned with Maturing Process in Manure Production Analyzed by a Method Based on Restriction Fragment Length Polymorphism Analysis

Composting is a biological aerobic decomposition process consisted from different phases. Although the Japanese Standards for manure recommended that it took at least 6 months to complete the maturing phase, there was no reliable ground. In order to find out shortening method of the maturing phase, the microorganisms concerned with a progress of the maturing was determined by using the most probable number method (MPN) and PCR-RFLP of the 16S rDNA, which was found effective to provide numbers and taxonomy of polymyxin B resistant bacterial groups in the former paper [1]. Compared to the numbers after thermophilic phase, those of Actinobacteria, δ-proteobacteria, and the other gram negative bacteria increased to 50 times, 20 times, and 105 times, respectively, after maturing phase, while those of Bacillus spp., and α and β-proteobacteria decreased to 1/10, and 1/105 after maturing phase. Numbers of the other Fumicutes, and γ-proteobacteria remained in the same revel. Actinobacteria, δ-proteobacteria, and the other gram negative bacteria might be concerned with a progress of the maturing phase, because these bacterial groups were detected and enumerated due to their proliferation ability. Although number of Acitinobacteria might be underestimated because of a PCR bias, the method was found effective for the purpose to monitor bacteria actively proliferated in culture medium.