基于ΣΔ调制的频率合成器及其性能

ΣΔ模数变换器使用内部１位量化器就能提供较高分辨率的输出。将ΣΔ调制技术应用于频率合成器中，能较好地提高频率合成器的频率覆盖范围、相位噪声及频率分辨率。定量地分析了ΣΔ调制频率合成器的性能，给出了实现方法。

分数频率合成器中数字∑_△调制器的设计

本文介绍了分数频率合成器中,数字∑△调制器设计应考虑的因素,描述了四种不同结构的数字∑△调制器,最后对其中一种结构进行设计并用FPGA来实现。

Regarding the Regulatory Sandbox Route and Mechanism for Governance of Artificial Intelligence

The main challenge in AI governance today is striking a balance between controlling AI dangers and fostering AI innovation.Regulators in a number of nations have progressively extended the regulatory sandbox,which was first implemented in the banking sector,to AI governance in an effort to reduce the conflict between regulation and innovation.The AI regulatory sandbox is a new and feasible route for AI governance in China that not only helps to manage the risks of technology application but also prevents inhibiting AI innovation.It keeps inventors'trial-and-error tolerance space inside the regulatory purview while offering a controlled setting for the development and testing of novel AI that hasn't yet been put on the market.By providing full-cycle governance of AI with the principles of agility and inclusive prudence,the regulatory sandbox offers an alternative to the conventional top-down hard regulation,expost regulation,and tight regulation.However,the current system also has inherent limitations and practical obstacles that need to be overcome by a more rational and effective approach.To achieve its positive impact on AI governance,the AI regulatory sandbox system should build and improve the access and exit mechanism,the coordination mechanism between the sandbox and personal information protection,and the mechanisms of exemption,disclosure,and communication.

基于FPGA的小数频率合成器

文章介绍了采用ΣΔ调制技术的小数频率合成器。为了提高分频信号的质量和减少小数分频器的小数杂散,采用了三阶单环ΣΔ调制技术。本文还提出了采用这种原理的具体电路实现方式。

Microstructure and mechanical properties of TiN/TiAlN multilayer coatings deposited by arc ion plating with separate targets

TiN/TiAlN multilayer coatings were prepared by arc ion plating with separate targets. In order to decrease the unfavorable macroparticles, a straight magnetized filter was used for the low melting aluminium target. The results show that the output plasmas of titanium target without filter and aluminium target with filter reach the substrate with the same order of magnitude. Meanwhile, the number of macropartieles in TiN/TiAlN multilayer coatings deposited with separate targets is only 1/10-1/3 of that deposited with alloy target reported in literature. Al atom addition may lead to the decrease of peak at （200） lattice plane and strengthening of peak at （111） and （220） lattice planes. The measured hardness of TiN/TiAlN multilayer coatings accords with the mixture principle and the maximum hardness is HV2495. The adhesion strength reaches 75 N.

A 5mW 1.8V Low Over-Sampling Ratio ΣΔ Modulator with 81dB Dynamic Range

This work demonstrates that the ΣΔ modulator with a low oversampling ratio is a viable option for the high-resolution digitization in a low-voltage environment.Low power dissipation is achieved by designing a low-OSR modulator based on differential cascade architecture,while large signal swing maintained to achieve a high dynamic range in the low-voltage environment.Operating from a voltage supply of 1.8V,the sixth-order cascade modulator at a sampling frequency of 4-MHz with an OSR of 24 achieves a dynamic range of 81dB for a 80-kHz test signal,while dissipating only 5mW.

ANALYSIS OF UN-COINCIDE COORDINATE ERROR IN SINGLE-AXIS ROTATING FIBER OPTIC STRAP-DOWN INERTIAL NAVIGATION SYSTEM

The un-coincide coordinate error in the single-axis rotating fiber optic strap-down inertial navigation system（SINS） is analyzed. Firstly, a rotating modulation technology is presented for SINS. The method provides the enhanced property of SINS when using the same-leveled inertial measurement units. Then, the rotating struc- ture modification is derived and augmented to resolve the un-modulated error-accumulated problem. As the insuf- ficient machine processing, the horizontal and the vertical errors on the machine surface are inevitable, and the in- volved coordinates are difficult to get the exact coincident. So, two major kinds of coordinate situation are stud- ied. The equivalent error models on gyro and acceleration outputs are built for each situation, and the impact is analyzed for compensation. The part of attitude and position error models caused by the built angle-rate error is established to calculate the un-eoincident impact. Considering these conditions of different gyro accuracy and mo- tion states simultaneously, numerical simulations are implemented. Results indicate that the SINS modulation ac- curacy is seriously affected by the combined factors on gyro accuracy and motion conditions.

Pulse Quick Charger of Electric Vehicle

In order to improve the charging efficiency of lead acid battery, shorten the charging time and avoid the battery polarization, a new charging method was put forward. Based on the analyzed results of charging characteristic of lead acid battery, a pulse quick charger is designed to adjust the charging current pulse’s amplitude and pulse width automatically stage by stage according to the measured battery voltage and feedback current. Compared with other kinds of quick chargers, it has such characteristics as shorter charging time, higher charging efficiency and lower temperature increasing during the charging process. As a result, the battery polarization is reduced efficiently.

A High-Performance Silicon Electro-Optic Phase Modulator with a Triple MOS Capacitor

We propose and analyze a novel Si-based electro-optic modulator with an improved metal-oxide-semiconductor （MOS） capacitor configuration integrated into silicon-on-insulator （SOl）. Three gate-oxide layers embedded in the silicon waveguide constitute a triple MOS capacitor structure, which boosts the modulation efficiency compared with a single MOS capacitor. The simulation results demonstrate that the Vπ Lπ product is 2. 4V · cm. The rise time and fall time of the proposed device are calculated to be 80 and 40ps from the transient response curve, respectively,indicating a bandwidth of 8GHz. The phase shift efficiency and bandwidth can be enhanced by rib width scaling.

A Novel Digital Transceiver for CT0 Standard

This paper introduces a novel digital transceiver for the cordless telephone zero （CT0） standard,which uses a digital modulation and demodulation technique to handle the signal instead of the traditional analog meth-od. In the transmitter,a fractional-N phase locked loop （PLL） is utilized to realize the continuous phase frequency shift key （CPFSK） modulation,and a 2 Ts raised cosine （2RC） shaping technique is used to reduce the occupied bandwidth. In the receiver,a novel digital method is proposed to demodulate the 2RC CPFSK signal. This chip is fabricated using an SMIC 0.35μm mixed signal CMOS process with a die size of 2mm × 2mm. With an external low noise amplifier （LNA）,the sensitivity of the chip is better than -103dBm.

10Gb/s EML Module Based on Identical Epitaxial Layer Scheme

A 10Gb/s transmitter module containing an electroabsorption modulator monolithically integrated with a distributed feedback (DFB) semiconductor laser is fabricated using the identical epitaxial layer scheme.Gain-coupling mechanism is employed to improve the single mode yield of the DFB laser,while inductively coupled plasma dry etching technique is utilized to reduce the modulator capacitance.The integrated device exhibits a threshold current as low as 12mA and an extinction ratio over 15dB at -2V bias.The small signal modulation bandwidth is measured to be over 10GHz.The transmission experiment at 10Gb/s indicates a power penalty less than 1dB at a bit-error-rate of 10 -12 after transmission through 35km single mode fiber.

Synthesis Scheme for Low Power Designs Under Timing Constraints

To minimize the power consumption with resources operating at multiple voltages a time-constrained algorithm is presented.The input to the scheme is an unscheduled data flow graph (DFG),and timing or resource constraints.Partitioning is considered with scheduling in the proposed algorithm as multiple voltage design can lead to an increase in interconnection complexity at layout level.That is,in the proposed algorithm power consumption is first reduced by the scheduling step,and then the partitioning step takes over to decrease the interconnection complexity.The time-constrained algorithm has time complexity of O(n 2),where n is the number of nodes in the DFG.Experiments with a number of DSP benchmarks show that the proposed algorithm achieves the power reduction under timing constraints by an average of 46 5%.

Three-stage Transformation of Chlorophyll Transient Fluorescence Pattern Under Sustained Dehydration and the Discovery of Critical Water Content in Seaweeds

The chlorophyll fluorescence kinetics of marine red alga Grateloupia turutunt Yamada, green alga Ulva pertusa Kjellm and brown alga Laminaria japonica Aresch during natural sustained dehydration were monitored and investigated. The pulse amplified modulation (PAM) system was used to analyze the distinct fluorescence parameters during thallus dehydration. Results proved that the fluorescence kinetics of different seaweed all showed three patterns of transformation with sustained water loss. These were: 1) peak kinetic pattern (at the early stage of dehydration fluorescence enhanced and quenched subsequently, representing a normal physiological state). 2) plateau kinetic pattern (with sustained water loss fluorescence enhanced continuously but quenching became slower, finally reaching its maximum). 3) Platform kinetic pattern (fluorescence fell and the shape of kinetic curve was similar to plateau kinetic pattern). A critical water content (CWC) could be found and defined as the percentage of water content just prior to the fluorescence drop and to be a significant physiological index for evaluation of plant drought tolerance. Once thallus water content became lower than this value the normal peak pattern can not be recovered even through rehydration, indicating an irreversible damage to the thylakoid membrane. The CWC value corresponding to different marine species were varied and negatively correlated with their desiccation tolerance, for example. Laminaria japonica had the highest CWC value (around 90%) and the lowest dehydration tolerance of the three. In addition, a fluorescence 'burst' was found only in red algae during rehydration. The different fluorescence parameters F-o, F-v and F-v, F-m were measured and compared during water loss. Both F-o and F-v increased in the first stage of dehydration but F-v/F-m. kept almost constant. So the immediate response of in vivo chlorophyll fluorescence to dehydration was an enhancement. Later with sustained dehydration F-o increased continuously while F-v decreased and tended to become smaller and smaller. The major changes in fluorescence (including fluorescence drop during dehydration and the burst during rehydration) were all attributed to the change in F-o instead of F-v This significance of F-o indicates that it is necessary to do more research on F-o as well as on its relationship with the state of thylakoid membrane.

DIGITAL PWM OF AC-AC MATRIX CONVERTER BASED ON OUTPUT-VOLTAGE ERROR FUNCTION

Based on the output-voltage error function, a novel time discrete modulation technique is proposed for matrix converters （MCs） and time-discrete difference equations of a MC circuit are derived. Switch states of MC are obtained when the output voltage error function is minimized, thus the optimum combination of switch states is derived for the closed-loop control of MC. Meanwhile, advantages of the least calculation workload, the simple process, and the convenient for implementation are brought while switch states are described as space vectors in the α-β coordination system. Simulation and experimental results demonstrate the validity of the time-discrete modulation technique and the feasibility of the control approach.

Ridge Waveguide Electro-Optic Polymer Modulator with a New Kind of Corona Poled Crosslinkable Polyurethane

A polymer electro optic modulator has been fabricated with the functional layer acting as a kind of corona poled crosslinkable polyurethane. The three optical layers, namely waveguide, photolithography and oxygen are fabricated by spin coating. With the Reactive Ion Etching method, the ridge of the waveguide is constructed. With light at 1 31μm being fiber coupled to waveguide, the mode and the modulation properties of these devices are demonstrated in a micron control system.

Soft-switching PWM boost full-bridge converter

This paper proposes a family of PWM modulation strategies for boostfull-bridge (FB) converters. The modulation strategies can be classified into two kinds according tothe turn-on sequence of the diagonal switches. The concept of leading switches and lagging switchesis introduced to realize soft-switching. According to the soft-switching realized by the leadingswitches and the lagging switches, two kinds of soft-switching techniques for PWM boost FBconverters yield: zero-current-switching (ZCS) and zero-current and zero-voltage-switching (ZCZVS).Simulation results verify the analysis.

Research on a Novel Inverter Based on DC/DC Converter Topology

The conventional inverters have the shortcomings of straightway conduction in transistors and the difficulty of realizing soft swit￣ching. A novel inverter based on the DC/DC converter topology is presented. The inverter is comprised of a combined Buck/Boost DC/DC converter and a bridge circuit. The front stage converter is controlled to output variable DC voltage and the bridge circuit is used to convert the DC voltage to AC output. The energy feedback technology and one circle control scheme are used t...

Effects of Different Curing Techniques on Material and Aroma of Flue-cured Tobacco

[Objective] The aim was to compare the effects of three-phase technique, quality and aromatic-flavor improvement technique and Zimbabwe technique on to-bacco quality to select a suitable technique in tobacco production. [Method] Tobacco leaves in down, middle and upper parts of a tobacco variety KRK26 were col ected to analyze raw tobacco quality characters. [Result] With quality and aromatic-flavor improvement technique, the proportions of high-quality and middle/high quality tobac-cos improved by 4.68% and 1.97% and average price enhanced by 1.15 yuan/kg, increasing by 10.33%, 9.07% and 3.12 yuan/kg, compared with three-phase tech-nique. It is proved that the technique would better improve tobacco fragrance and quality and coordinate tobacco fragrance, taste and throat-irritation. [Conclusion] Quality and aromatic-flavor improvement technique provides references for tobacco production.

A Kind of PWM Pneumatic Servo Control System——Modulation Methods and Dynamic Responses

Vibrations or dither's are features of the PWM servo control system in their steady outputs. On the grounds of analyses and experiments of a PWM pneumatic servo control system, the paper puts forward four varieties of PWM modulation methods, and concludes on the relationship between dithers and the different methods, and then discusses the influence of friction to the dithers. Results from experiments regarding the dynamic and static responses on the given system support the theories presented.

Effect of Different Flue-curing Techniques on the Taste and Aroma Substances of Tobacco Leaves

[Objective]This study aimed to optimize the conditions for curing tobacco leaf, so as to improve its flavor and quality. [Method] Leaves of Yuanyan 87 were col ected and cured by three different techniques （moderate-intensity conditions throughout the curing course; high-intensity conditions at leaf yel owing and wilting stages, moderate-intensity conditions at leaf drying and vein drying stages; high-in-tensity conditions throughout the curing course）, and then the contents of 48 aroma substances and taste indices of the finished tobacco leaves were measured. [Result] The contents of 28 aroma substances in the tobacco leaves cured under high-inten-sity conditions throughout the course were higher and the taste indices of these to-bacco leaves were better, compared with those flue-cured by the other two tech-niques. The contents of the other 20 aroma substances were not significantly af-fected by the curing techniques. The second best technique was high-intensity con-ditions at leaf yel owing and wilting stages and moderate-intensity conditions at leaf drying and vein drying stages. Curing tobacco leaves at moderate-intensity condi-tions throughout the course was the worst one. [Conclusion] Compared with the oth-er two methods, the contents of aroma substances and taste indices of the tobacco leaves cured under high-intensive conditions throughout the course were the best.