∑-△调制技术在频率合成器中应用的研究

本文讨论了一种利用∑－△面调制技术以抑制小数分频锁相环相位杂散的新方法，分析了它的工作原理，给出了∑－△面调制小数分频器的数字模型及相位噪声表达式，对模型进行了计算机仿真，其结果与理论值吻合。

A 16bit 96kHz Chopper-Stabilized Sigma-Delta ADC

A 16bit sigma-delta audio analog-to-digital converter is developed.It consists of an analog modulator and a digital decimator.A standard 2-order single-loop architecture is employed in the modulator.Chopper stabilization is applied to the first integrator to eliminate the 1/f noise.A low-power,area-efficient decimator is used,which includes a poly-phase comb-filter and a wave-digital-filter.The converter achieves a 92dB dynamic range over the 96kHz audio band.This single chip occupies 2.68mm2 in a 0.18μm six-metal CMOS process and dissipates only 15.5mW power.

Application of genetic algorithm in quasi-static fiber grating wavelength demodulation technology

A modified genetic algorithm （GA） has been proposed, which was used to wavelength demodulation in quasi-static fiber grating sensing system. The modification method of GA has been introduced and the relevant mathematical model has been established. The objective function and individual fitness evaluation strategy interrelated with GA are also established. The influence of population size, chromosome size, generations, crossover probability and mutation probability on the GA has been analyzed, and the optimal parameters of modified GA have been obtained. The simulations and experirnents, show that the modified GA can be applied to quasi-static fiber grating sensing system, and the wavelength demodulation preci- sion is equal to or less than 3 pm.

A Survey: Several Technologies of Non-Orthogonal Transmission for 5G

One key advantage of 4G OFDM system is the relatively simple receiver implementation due to the orthogonal resource allocation.However,from sum-capacity and spectral efficiency points of view,orthogonal systems are never the achieving schemes.With the rapid development of mobile communication systems,a novel concept of non-orthogonal transmission for 5G mobile communications has attracted researches all around the world.In this trend,many new multiple access schemes and waveform modulation technologies were proposed.In this paper,some promising ones of them were discussed which include Non-orthogonal Multiple Access(NOMA),Sparse Code Multiple Access(SCMA),Multi-user Shared Access(MUSA),Pattern Division Multiple Access(PDMA)and some main new waveforms including Filter-bank based Multicarrier(FBMC),Universal Filtered Multi-Carrier(UFMC),Generalized Frequency Division Multiplexing(GFDM).By analyzing and comparing features of these technologies,a research direction of guiding on future 5G multiple access and waveform are given.

UNI-SPEC:An Instruction Set Description Language

Microprocessor development emphasizes hardware and software co design. Hw/Sw co design is a modern technique aimed at shortening the time to market in designing the real time and embedded systems. Key feature of this approach is simultaneous development of the program tools and the target processor to match software application. An effective co design flow must therefore support automatic software toolkits generation, without loss of optimizing efficiency. This has resulted in a paradigm shift towards a language based design methodology for microprocessor optimization and exploration. This paper proposes a formal grammar, UNI SPEC, which supports the automatic generation of assemblers, to describe the translation rules from assembly to binary. Based on UNI SPEC, it implements two typical applications, i.e., automatically generating the assembler and the test suites.

RELAY ASSISTED TRANSMISSSION WITH BIT-INTERLEAVED CODED MODULATION

We investigate an adaptive cooperative protocol in a Two-Hop-Relay (THR) wireless system that combines the following: (1) adaptive relaying based on repetition coding; (2) single or two transmit antennas and one receive antenna configurations for all nodes, each using high order constellation; (3) Bit-Interleaved Coded Modulation (BICM). We focus on a simple decoded relaying (i.e. no error correcting at a relay node) and simple signal quality thresholds for relaying. Then the impact of the two simple thresholds on the system performance is studied. Our results suggest that compared with the traditional scheme for direct transmission, the proposed scheme can increase average throughput in high spectral efficiency region with low implementa-tion-cost at the relay.

Progress of heat-hazard treatment in deep mines

Based on the urgency of thermal hazard control in deep coal mines,we studied the status of deep thermal damage and cooling technology both at home and abroad,summarized the causes of deep thermal hazard,analysed and compared the control technologies for deep thermal hazards.The results show that the causes of deep thermal damage can be attributed to three aspects,i.e.,climate,geological and mining factors,of which the geological factors are deemed the major reasons for thermal hazards.As well,we compared a number of cooling technologies of domestic and overseas provenance,such as central air conditioning cooling technology,ice cooling technology and water cooling technology,with one other cooling technology,i.e.,the HEMS cooling technology,which has a large and important effect with its unique＂pure air＂cooling technology,realizes the utilizing of heat resources from underground to the ground.This technology makes use of heat obtained underground;thus the technology can promote low-carbon environmental economic development in coal mines,in order to achieve low- carbon coal production in China.

Clock-Control Sequence Encryption Scheme and Simulation in the PCM/PPK Telemetry System

PCM/PPK telemetry system is a multi-nary pulse modulation system.It is commonly used to transmit high-accuracy time information and some express signals.To the issue of security that telemetry data is transmitted in the open space,a data encryption scheme in the PCM/PPK telemetry system is proposed.In this scheme,the PCM data of signal source are encrypted by stream cipher in which key streams are generated with clock control LSFR.The scheme can save system resource in the dual-modulation compound telemetry system.A backward key synchronization scheme is also proposed,which has the property of strong real-time and easy to implement.A simplified simulation model of PCM/PPK remote system is established based on the actual framework of telemetry system,and the model is simple and easy to simulate.The error performance of the system is analyzed in theory and tested by computer simulation.Also the security of the system is analyzed.The simulation and analysis results show that the encryption scheme can ensure the security of the telemetry data and does not cause error-diffusion.

AN ITERATIVE RELIABILITY-BASED DECODING FOR LDPC CODED MODULATION SYSTEM

In this paper, A Belief Propagation concatenated Orderd-Statistic Decoder (BP-OSD) based on accumulated Log-Likelihood Ratio (LLR) is proposed for medium and short lengths Low Density Parity-Check (LDPC) codes coded Bit-Interleaved Coded Modulation (BICM) systems. The accumulated soft output values delivered by every BP iteration are used as reliability values of Soft-Input Soft-Output OSD (SISO-OSD) decoder and the soft output of SISO-OSD is used as a priori probabilities of the demodulator for the next iteration. Simulation results show that this improved algorithm achieves noticeable performance gain with only modest increase in computation complexity.

Control Strategies for PM Synchronous Machine Controlled Rectifier Intended for Heavy-Duty Vehicle

In order to charge batteries and supply all the electrical devices like wheel-motors used in a heavy-duty hybrid electric vehicle, a solution consists in using an assembly permanent magnet generator driven by a diesel engine and a three-phase insulated gate bipolar transistor/diodes bridge controlled rectifier connected to the battery. In this work, hysteresis current control strategies combined with a judicious current sensing mode for the assembly permanent magnet synchronous machine-controlled rectifier are investigated. Main issues first concern the different kinds of transistors switching modes allowed by the proposed current sensing mode when the machine operates either as a generator or as a motor. Second, the modulated hysteresis method is presented, which merges the performances of robustness and dynamic of the classical hysteresis method and imposes the switching frequency alike pulsewidth modulation techniques. A test bench at reduced power permits to test the switching modes as well as classical and modulated hysteresis methods for both motor and generator operating modes and to validate the simulation predictions. The digital signal processor algorithm elaborated for the control strategy is flexible and adaptable to all kinds of transistor switchings and machine operating modes.

Algorithm implementation of high-speed laser g yro signal demodulation filter

Based on the characteristics of field-programmable gate array(FPGA) such as multi-task,high-speed,parallelity,etc,a filtering algorithm is presented to filter the output signal of laser gyr o with high-speed and high accuracy.The filter is composed of basic logic cell s,multipliers an d memory inside FPGA.By using an multiplication decomposition method and design ing reliable time-sequence,the filter is realized,which is easy to be transpl anted and of low cost.Furthermore,all the signal demodulation algorithms of t he laser gyr oscope can be integrated in only one FPGA,which reduces the cost and complexity of the system.

Error analysis and correction of high-accuracy modulation domain measurement

Modulation domain measurement can be u sed to analyze the frequency,phase,and time intervals which transiently change with time.During the implementation of modulation domain analyzer,meas urement errors can be introduced in multiple parts.Aiming at a typical implementation of modul ation domain analyzer,this paper analyzes the inherent error between channe l s,temperature drift error in time-to-digital converter(TDC),random err or,time-base error and their influence on the modulation domain measurement.It also gives a correction sche me and comparison of the measurement results.The frequency resolution can be im proved from 10 to 12 bit/s after correction.

A novel M-ary modulation technique based on optimal chirp signal design

A novel M-ary chirp modulation technique based on an optimal chirp signal design is proposed in this paper to offer higher data rate for an indoor wireless chirp spread spectrum communication system. Both linear chirp signals and combined chirp signals are used in this system to reduce the effect of the cross correlation, and simplify the complexity of the system. The optimal scheme of de- signing both linear chirp signals and combined chirp signals is discussed to minimize the value of the cross correlation and obtain a better system performance. Simulation results show that, compared with the binary orthogonal chirp modulation technique, the M-ary chirp modulation technique based on an optimal chirp signal set has a higher data rate with a reasonable bit-error rate （BER） perform- ance under both additive white gaussian noise （AWGN） channel and indoor wireless channel.

The intensity calculation of the gas absorption line by multi-line Voigt fitting

Adopted the distribution feedback type （DFB） laser to measure the coal mine gas methane, according to the methane located 1.6 μm nearby 2v3 with a R9 direct absorption spectrum, attraction wire intensity of each line was calculated through the multi-line Voigt fitting. The experimental result indicates that in the obtained four attraction recover of wire, the maximum deviation is 2.7%, and the minimum deviation is 0.02%, other results are all in experimental error scope. This research method may apply in the spectrum survey methane gas density, it has characteristics including high precision, strong selectivity, fast response and so on.

Pulsed digital holography for recording ultra-fast events

In this paper,spatially angular multiplexing technique in pulsed digital holography and an optical system based on this technique are introduced.Optical simulation and calculating analysis show that the designed system can be employed to record ultra-fast events of a time resolution in nanosecond.

Power-line Modem over the Low Voltage Grid Using Direct Sequence Spread Spectrum Techniques

Power-line networks are designed to deliver electricity. They reach most of the domiciles and other buildings nowadays, so most of the people have access to it. On the other hand the backbone for the communications networks is not available in all countries especially the developing ones. A high cost and changing the design for the networks may be needed to construct this backbone. If data can be transmitted over the power-line networks, a recognized cost and time save can be achieved. In Egypt, the infrastructure is not always available for constructing a communications network backbone due to the already designed buildings before the need for these backbones. In this paper, we overcome this problem by designing a reliable Power-line Modem that operates safely on the low voltage grid. The modem is based on the Direct Sequence Spread Spectrum technique. It uses the mains zero crossing as an efficient way for the synchronization between the transmitter and the receiver. The Modem takes into account the problems of the Power-line including noise, attenuation and impedance dismatching.

A NOVEL AERONAUTICAL STATIC INVERTER WITH HIGH FREQUENCY PULSE DC LINK

A new combined soft switching technique and a novel topology of aeronautical static inverter with high frequency pulse dc link are proposed in this paper, namely an electrical isolated converter can realize soft switching of two stage cascade converters. It lays technical foundation for high power density, high efficiency and low cost aeronautical static inverter. The operation and design approach of this topology are carefully analyzed and studied. The validity of this topology is verified by simulation and test.

Magnetic sensitivity technology based on microwave modulation of solid state spin system NV center

In view of the low resolution and accuracy of traditional magnetometer,a method of microwave frequency modulation technology based on nitrogen-vacancy(NV)center in diamond for magnetic detection was proposed.The magnetometer studied can reduce the frequency noise of system and improve the magnetic sensitivity by microwave frequency modulation.Firstly,ESR spectra by sweeping the microwave frequency was obtained.Further,the microwave frequency modulated was gained through the mixed high-frequency sinusoidal modulation signal generated by signal generator.In addition,the frequency through the lock-in amplifier was locked,and the signal which was proportional to the first derivative of the spectrum was obtained.The experimental results show that the sensitivity of magnetic field detection can reach 17.628 nT/Hz based on microwave frequency modulation technology.The method realizes high resolution and sensitivity for magnetic field detection.

Employer Branding Management As A Strategic and Organizational Control Tool

The issue of employer branding has always had an intrinsic interdisciplinary content, since it builds a bridge for cross-fertilization between different disciplines （strategic marketing, strategic management, and human resources management）. This paper presents employer branding as an approach based on effective strategic organizational resources and a precise employer branding management process. In this paper, the target is to define a possible frame in order to interpret employer branding techniques as control and regulation mechanisms. Control in organizations has long been a topic of interest for researchers and practitioners, alike who generally recognize that control mechanisms are needed to ensure that organizations may achieve their goals. It has been carried out a field work on the Italian Aeronautical Meta district, that generates annual revenues equal to EUR 8.7 billion and employees 36,300 people, of whom approximately 10% are employed in the space sector. Through this field work, the intention aim is to understand if and how employer branding may create, enforce, and set up internal and shared meaning and values. In particular, stemming from the empirical research＇s evidences, this paper tries to conceptualize employer branding as a factor to persuade and influence the way that organizational actors enact in a socially constructed context. In this effort, the aim is to understand how managers may affect meanings, values goals, and opinions through an effective action on employer branding that can play a crucial role in affecting sense-making processes, meanings, interpretations of the symbolic environment. The paper therefore opens up to new horizons, since it embraces a new application for employer branding, considering it as a modern control system and proposing an innovative approach in managerial control, founded on organizational identity as a key concept in an organizational citizenship＇s perspective

Signal processing circuit of laser gyro based on FPGA and DSP

This is a paper about laser gyro sign a l processing circuit which is designed based on field-programmable gate array(FPGA) and digital signal processor(DSP).Through a pre-amplifier circuit,FPGA and DSP,a weak current signal is converted and transferred,then sent to the computer to display the final results.Through the laser gyro performance te sting,the obtained results coincide with those of the existing methods.Thus th e d esigned circuit realizes the function of laser gyro signal processing.