闭合复位经皮克氏针∝形固定治疗儿童肱骨近端骨折

目的探讨闭合复位经皮克氏针∝形固定治疗儿童移位肱骨近端骨折的临床疗效。方法回顾性分析自2016-06-2018-06采用闭合复位经皮克氏针∝形固定治疗的16例儿童移位肱骨近端骨折。术后采用肩关节功能ConstantMurley评分标准评定疗效。结果 16例均获得随访,随访时间平均12.3(6~19)个月。所有患儿骨折均愈合良好,骨折愈合时间平均8(6~10)周。术后6个月采用肩关节功能Constant-Murley评分标准评定疗效:优9例,良6例,可1例。结论闭合复位经皮克氏针∝形固定治疗儿童移位肱骨近端骨折具有创伤小、不损伤骨骺、固定稳定、术后功能恢复快等优点。

Simulation and experimental validation of three-dimensional dendrite growth

A three-dimensional （3-D） modified cellular automaton （MCA） method was developed for simulating the dendrite morphology of cubic system alloys. Two-dimensional （2-D） equations of growth velocities of the dendrite tip, interface curvature and anisotropy of the surface energy were extended to 3-D system in the model. Therefore, the model was able to describe the morphology evolution of 3-D dendrites. Then, the model was applied to simulate the mechanism of spacing adjustment for 3-D columnar dendrite growth, and the competitive growth of columnar dendrites with different preferred growth orientations under constant temperature gradient and pulling velocity. Directional solidification experiments of NH4Cl-H2O transparent alloy were performed. It was found that the simulated results compared well with the experimental results. Therefore, the model was reliable for simulating the 3-D dendrite growth of cubic system alloys.

Computer Simulation of Compensation Method for Infrared Focal Plane Array

A major motivation for this work is to investigate a method of computer simulation for compensating fixed pattern noise of the infrared focal plane arrays. A mathematical model of the output signal of focal plane array was established; a compensating algorithm utilizing reference source was derived and simulating programs were designed. The images of compensating process verify the influence of nonuniformity of responsibility and offset on fixed pattern noise. The result show that simulating method of investigating compensation technology for focal plane arrays is feasible, the generated images and methods can be used to the study of image recognition.

Macrosegregation and thermosolutal convection-related freckle formation in directionally solidified Sn−Ni peritectic alloy in crucibles with different diameters

Different from other alloys,the observation in this work on the dendritic mushy zone shows that the freckles are formed in two different regions before and after peritectic reaction in directional solidification of Sn−Ni peritectic alloys.In addition,the experimental results demonstrate that the dendritic morphology is influenced by the temperature gradient zone melting and Gibbs−Thomson effects.A new Rayleigh number(Ra_(P))is proposed in consideration of both effects and peritectic reaction.The prediction of Ra_(P) confirms the freckle formation in two regions during peritectic solidification.Besides,heavier thermosolutal convection in samples with larger diameter is also demonstrated.

Synthesis, in-situ coating and characterization of scorodite with high leaching stability

To improve stability of scorodite,a method of simultaneous synthesis and in-situ coating of scorodite was proposed.Scorodite particles with polyhedral and raspberry-like morphologies were synthesized in an Fe(Ⅱ).As(Ⅴ).H2O system at 90℃and pH 1.5 by blowing oxygen gas into the system.When the initial Fe/As molar ratio exceeded 1:1,a coating of sulfate-containing iron(hydr)oxides formed on the surfaces of scorodite particles during synthesis.To evaluate the leaching stability of synthesized scorodite samples,toxicity characteristic leaching procedure(TCLP)tests were conducted at pH 4.93 for 60 h,and long-term leaching tests were conducted for 30.40 d within a pH range of 5.40.10.88.The leaching results indicated that the release of arsenic from scorodite was noticeably postponed by the coating,and the average arsenic concentrations in the leaching solutions were as low as 0.12 mg/L in the TCLP tests and lower than 0.5 mg/L in the long-term leaching tests.

Efficacy of Spinal Pia Mater Incision and Laminoplasty Combined with Internal Fixation for Old Spinal Cord Injury

Objective To evaluate the clinical efficacy of incising spinal pia mater to relieve pressure and unilateral open-door laminoplasty with internal screw fixation for treatment of the dated spinal cord injury. Methods From March, 2009 to July, 2010, 16 cases with chronic cervical cord injury underwent spinal dura mater incision and unilateral open-door laminoplasty with internal screw fixation. Nerve functions of preand postoperation were evaluated by Frankel classification and the Japanese Orthopaedic Association (JOA) scale. The improvement rate of JOA score at the indicated time was recorded. Results Postoperative Frankel classification rating of 16 patients improved obviously. JOA scores at the 1st month, 3rd month, 6th month, and 12th month after surgery were 7.9±2.3, 8.5±1.6, 8.9±2.1, and 12.4±2.5, respectively, and significantly increased compared with that prior to surgery (5.5±0.6). At the end of follow-up period, JOA score was significantly higher than that of pre-treatment (P<0.05). The recovery was relatively rapid during the first 3 months following the surgery, then entered a platform period. Conclusion It is effective for patients with dated spinal cord injury to undergo spinal decompression and laminoplasty.

An Existence Result of the Elliptic Equation Δu+K(x)e^(2u)=0

This paper considers the existence problem of an elliptic equation, which is equivalent to solving the so called prescribing conformal Gaussian curvature problem on the hyperbolic disc H^2. An existence result is proved. In particular, K（x） is allowed to be unbounded above.

Embankment deformation analyzed by elastoplastic damage model coupling consolidation theory

The deformation, of embankment has serious influences on neighboring structure and infrastructure. A trial embankment is reanalyzed by elastoplastic damage model coupling Blot＇ s consolidation theory. With the increase in time of loading, the damage accumulation becomes larger. Under the centre and toe of embankment, damage becomes serious. Under the centre of embankment, vertical damage values are bigger than horizontal ones. Under the toe of embankment, horizontal damage values are bigger than vertical ones.

Molecular Dynamics Study of Icosahedral Clusters in Ni-Zr Amorphous Alloys

Formation of icosahedral dusters in rapidly solidified binary amorphous NixZr100-x （x = 15, 33.3, 50, 66.7, 85） is studied by using molecular dynamics simulation methods. A large number of icosahedral dusters with 13 atoms （Ih13） were observed in NixZr100-x alloys, and most of them, even those in Zr-rich alloys, are found to be Ni-centred. Studies on the structures of Ni33.3Z66.7 obtained at different cooling rates demonstrate that most of iscosahedral dusters enhanced by decreasing cooling rates are also Ni-centred, The essentials of Ni atoms preferring to be the core of icosahedral clusters are illustrated with the criterion of energy minimization and the equilibrium interatomic distances between different atoms.

Research on stability design of a bar-reinforced spherical bulkhead

In this paper, the stability of a concave spherical stem bulkhead under the pumping load when still lying at the slipway is analyzed. The stability of the spherical stem bulkhead with different shell thickness and reinforcing forms is discussed. According to the results of stability analysis, the optimization design of the spherical stem bulkhead stability is performed. On the basis of considering the machining technical requirements of the bulkhead, a rational design of the spherical stem bulkhead structure is obtained. This paper has a certain value to the design of submarine's spherical stem bulkhead.

320×240 Pixels CMOS Digital Image Sensor with Wide Dynamic Range

A 320×240 CMOS image sensor is demonstrated,which is implemented by a standard 0.6 μm 2P2M CMOS process.For reducing the chip area,each 2×2-pixel block shares a sample/hold circuit,analog-to-digital converter and 1-b memory.The 2×2 pixel pitch has an area of 40 μm×40 μm and the fill factor is about 16%.While operating at a low frame rate,the sensor dissipates a very low power by power-management circuit making pixel-level comparators in an idle state.A digital correlated double sampling,which eliminates fixed pattern noise,improves SNR of the sensor, and multiple sampling operations make the sensor have a wide dynamic range.

Development of a Lightning Warning System

A lightning warning system （LWS） which can predict the possibility of lightning strike and the position of lightning discharge was developed. The LWS uses the electric field intensity at the ground as a parameter to warn the possibility of lightning strikes. A planar shutter type electric field mill （EFM） with a rotating vane is studied to measure the electric field. From a calibration experiment, the sensitivity of the EFM was adjusted to 0.15 V/kV/m, and this covers the ranges from 200 V/m to 20 kV/m. Magnetic field waveform is detected by a crossed loop coil and an integral amplifier. Frequency bandwidth of the circuit ranges from 5 kHz to 1.2 MHz. The polarity of lightning discharges is discriminated by electric field component. After fixing the polarity, we can calculate the direction and distance of lightning discharge by the peak and the zero cross time of the detected magnetic field waveform.

Electro-spark epitaxial deposition of NiCoCrAlYTa alloy on directionally solidified nickel-based superalloy

An 8 mm-high NiCoCrAlYTa coating was epitaxially built-up on a directionally solidified (DS) Ni-based superalloy blade tip by electro-spark deposition.Epitaxial morphologies of the coating and its microstructural characteristics were investigated by means of SEM,XRD and TEM etc.It is observed that the fine column-like dendrites originated from the γ'-particles or γ'-clusters of the DS substrate and are un-continuously coarsened.The β-phase particles precipitate and grow eutectically with the γ-phase.The orientation of fine column dendrites depends on electro-spark deposition processing parameters and the microstructure can be characterized with superfine γ and β phases.

Study on structural and compositional transitions of coal ash by using NMR

Structural and compositional transitions of Datong coal ash and its CaCO3 additional effects were carefully exam- ined at a temperature range of 300 to 1 600℃ by using XRD and solid state NMR. The quantitative estimation of amorphous structures of ashes can be successfully obtained through the analyses of solid state NMR spectra. Viscosity of molten ash and its changes with CaCO3 addition were also evaluated up to 1 700 ℃ by using a rotary type viscometer. Glasses with poor crystalline and amorphous phase were continuously formed through the eutectic reaction of silica above fusing temperature （FT〉1 500 ℃） that caused broadening and shift of 29Si and 27A1 peaks in NMR results. With the additional amount of CaCO3 increasing, the peaks shifted to downfield obviously; the fraction of Si（OA1）0（OSi）4 decreased, while that of Si（OA1）l（OSi）l at 84.3 x 10-6 increased apparently. These transitions indicated the destruction of large alumina-silicate framework into small segments by the addition of Ca ion.

Combined fracture dislocation of the navicular bone along with cuboid, cuneiform and longitudinal split fracture of the lateral malleolus： a rare combination of fractures

Fracture dislocation of the navicular bone~ fracture of the cuboid, cuneiform, and longitudinal split fracture of the lateral malleolus is a rare combination of fractures. This is a high velocity injury fracture and can be caused by forcible plantar flexion and inversion of the foot at the time of impact onto the ground. Here we reported such a case in a 35-year-old male patient who was treated by open reduction and fixation with a partially threaded screw and two K-wires for the navicular bone,and two interfragmentary screws with a one third tubular plate for the lateral malleolus. K-wires were removed 6 weeks after surgery followed by partial weight bearing. After 6 months, the patient can walk normally with minimal pain and swelling of the foot.

Mallet finger deformities treated by buried purse-string suture

Objective： To investigate the efficacy of buried purse-string suture in the treatment of mallet finger deformities. Methods： From February 2009 to February 2010, 12 patients with closed non-fracture mallet fingers were treated by buried purse-string suture. The rupture tendons were sutured by purse-string suture with an atraumatic needle, and the knots were buried under subcutaneous tissue. External fixator was used at the extension position of the finger every night within three weeks after operation. Results： All patients were followed up for 6-12 months, mean 7 months. According to the Patel＇s evaluation criteria, 2 cases （17%） obtained excellent results, 7 good （58%）, 2 fair （17%） and 1 poor （8%）. The overall rate of the cases with excellent and good outcomes was 75%. Conclusion： Buried purse-string suture is an easy and effective way to treat mallet finger deformities, with no serious postoperative complications or no need for reoperation.

Accurate Understanding of China's Income, Consumption and Investment

This study elaborates on the differences between resident disposable income in the flow of fimds table and in the household survey; between household consumption in expenditure- based GDP and in the household survey; and between gross fixed capital formation in expenditure-based GDP and total fixed asset investment in the whole country as shown in investment statistics, from the point of view of their basic concepts and purposes, scope of specifications, data sources, calculation methods and data presentation. We show that the household survey somewhat underestimates household income and consumption, while investment statistics somewhat overestimate total investment in fixed assets. This does not, however, directly affect the accurate understanding of such major economic structures as the structure of the distribution of Chinese nationals＇ disposable income among households, enterprises and government, the structure of final demand, etc.

Biomechanical principle of arcus plantaris and its clinical application

To analyze the principle mechanism of the arcus plantaris and its clinical application. Methods: The states of forces sustained by the arcus plantaris were analyzed and calculated according to the mechanism of the quadratic parabolic arch. Results: The aponeurosis plantaris corresponded to the pull rod of the arcus plantaris. The medial and lateral longitudinal arches formed by the pedal bones were stable with the rod, but unstable without the rod. In the latter condition, on loading, the force sustained by the parabolic arch became a force sustained by a simple beam, and the arcus plantaris tended to disappear and to be flattened. Clinically, 240 feet with talipes equinus were treated with triple arthrodesis. In 34 out of the reexamined 156 feet, the aponeurosis plantaris was cut in addition to the triple arthrodesis and was immobilized with cast for 3 months. One or two years later, their arcus plantaris disappeared, pain developed when walking, and some of them walked with the midtarsal joint against the ground. Then, the triple arthrodesis and shortening of the aponeurosis plantaris were applied on 18 cases, and osteotomy of the calcaneus and reconstruction of the aponeurosis plantaris were made on 10 cases and satisfactory effects were obtained. Conclusions: In order to achieve satisfactory therapeutic effects of the triple arthrodesis, we should reestablish the arcus plantaris and accurately treat the aponeurosis plantaris for the balance of the surrounding muscle force.

Current Research and Development on Deformation and Fixation of Bended Wood and Wood-based Composites

There are many advantages of bended wood, such as good-looking shape, simple process and low cost. The product, however, is easy to get recovery, which is urgent to be dealt with. This paper concludes the features of deformation and recovery of bended wood and wood-based composites and summarizes four treating methods to keep dimensional stability. Compared to bended solid wood, some elementary perspectives on the research of bended wood-based composites are presented. The purpose of this paper is to suggest： 1） to investigate the optimum heating time and temperature that bended wood and wood-based composites need from the formation of deformation to the recovery and to the permanent fixation, according to its changes of dimensional stability such as curvature radius; 2） to measure the composites comprised of wood and adhesives on the changes of stress relaxation, dynamic viscoelasticity and crystallization field; 3） to quantitatively analyze changes of the major components in wood cell wall polymers as well as the composites under heat/steam treatment and untreated conditions. It will be helpful for subsequent research to clarify on the mechanisms of permanent fixation of bended wood and also contribute to that of wood-based composites.

Morphological evolution of the solid-liquid interface near grain boundaries during directional solidification

Morphological evolution of the solid-liquid interface near grain boundaries has been studied during directional solidification of succinonitrile-based transparent alloys (SCN-0.9wt%DCB). Experimental results show that the grain boundary provides the starting point of morphological instability of the solid-liquid interface. The initial perturbation near the grain boundary is significantly larger than other perturbations on the interface. The initial shape of the interface and the competition between the thermal direction and preferred crystalline orientations determine the subsequent growth pattern selections. The temporal variations of the curvature radius of cell/ridge tips near the grain boundary have also been studied when the instability occurs. This process is divided into three parts. As the pulling velocity increases, dendrites at the grain boundary grow in two different directions to form a bicrystal microstructure. Side branches on either side of the dendrite exhibit different growth patterns.