单绕组双速电动机的一种新接法

提出了单绕组双速电动机的一种新接法——△△/△接法,适用于远速比双速电动机,能使双速下气隙磁密比合理,从低速档(2p_2极)变极切换到高速档(2p_1极)不需切断三相电源可使升速平稳和避免过大的电流冲击,且这种绕组每个线圈有相同的线规、匝数和跨距,是极普通的双层绕组,生产上极为方便。文中给出了 △△/△接法、 6/16极双速绕组作为实例。

Optimal Order-of-Addition Experiments under a Prior Constraint

The order-of-addition experiments are widely used in many fields,including food and industrial production,but the relative research under prior constraints is limited.The purpose of this paper is to select an optimal sequence under the restriction that component i is added before component j,while it is unachievable to compare all sequences when the number of components m is large.To achieve this,a constrained PWO model is first provided,and then the D-optimal designs for order-of addition experiments with minimal-points via the modified threshold accepting algorithm is established.The effectiveness of the proposed method is demonstrated through a job scheduling problem with a prior constraint for teaching cases.

Research on Verification Method of Motor Startups in Nuclear Power Plants Based on Topology Recognition

There are many motors in operation or on standby in nuclear power plants,and the startup of group motors will have a great impact on the voltage of the emergency bus.At present,there is no special or inexpensive software to solve this problem,and the experience of engineers is not accurate enough.Therefore,this paper developed a method and system for the startup calculation of group motors in nuclear power plants and proposed an automatic generation method of circuit topology in nuclear power plants.Each component in the topology was given its unique number,and the component class could be constructed according to its type and upper and lower connections.The subordination and topology relationship of switches,buses,and motors could be quickly generated by the program according to the component class,and the simplified direct power flow algorithm was used to calculate the power flow for the startup of group motors according to the above relationship.Then,whether the bus voltage is in the safe range and whether the voltage exceeds the limit during the startup of the group motor could be judged.The practical example was used to verify the effectiveness of the method.Compared with other professional software,the method has high efficiency and low cost.

Fast algorithm for constructing neighbor-joining phylogenetic trees

To improve the performance of Saitou and Nei＇s algorithm （SN） and Studier and Keppler＇s improved algorithm （SK） for constructing neighbor-joining phylogenetic trees and reduce the time complexity of the computation, a fast algorithm is proposed. The proposed algorithm includes three techniques. First, a linear array A[N] is introduced to store the sum of every row of the distance matrix （the same as SK）, which can eliminate many repeated computations. Secondly, the value of A [i] is computed only once at the beginning of the algorithm, and is updated by three elements in the iteration. Thirdly, a very compact formula for the sum of all the branch lengths of operational taxonomic units （OTUs） i and j is designed, and the correctness of the formula is proved. The experimental results show that the proposed algorithm is from tens to hundreds times faster than SN and roughly two times faster than SK when N increases, constructing a tree with 2 000 OTUs in 3 min on a current desktop computer. To earn the time with the cost of the space and reduce the computations in the innermost loop are the basic solutions for algorithms with many loops.

Reproduction and biological characteristic of Chouioia cunea

Chouioia cunea Yang is a natural enemy for many kinds of crop and forest pests, particularly for Hyphantria cunea Drary, which is an international quarantine pest. The experiment of rearing Chouioia cunea with Tussah (Silkworm) pupa were carried out by 搕hree-cut method?and inoculating method. The results showed that three-cut method is effective way for breed-ing Chouioia cunea, with a parasitical rate of 95%. The biological characteristics and the life cycle of Chouioia cunea were ob-served and described and more hosts of Chouioia cunea were found. 揟hree-cut method?as a new technique of rearing Chouioia cunea has been put into practice.

Agroinoculation as a Simple Way to Deliver a Tobacco Mosaic Virus- Based Expression Vector

烟草花叶病毒(TMV)表达载体30B是一个目前广泛应用的植物病毒表达载体,但用其生产外源蛋白时,必须先将它体外转录成RNA,才能被用来接种宿主植物。由于RNA体外转录费用昂贵、操作复杂,因此限制了30B表达载体的进一步应用。针对这一不足,我们用农杆菌接种法(agroinoculation)接种该病毒载体,即将30B cDNA置于花椰菜花叶病毒(CaMV)的35S启动子和终止子之间,再将整个表达框架插入到农杆菌T-DNA的左边界和右边界之内,构建成质粒p35S-30B,将转入该质粒的农杆菌注射到植物的叶片中,30B cDNA随T-DNA进入植物细胞后,被转录成可自我复制的RNA形式,进而发生系统侵染。为了检测此接种方式的可行性,绿色荧光蛋白(GFP)报告基因被克隆到p35S-30B中,构建成p35S-30B∶∶GFP,用含有该质粒的农杆菌进行注射操作。证实该病毒载体可通过简便的农杆菌接种法侵染Nicotiana benthamiana,在被接种植物的系统叶中,GFP的表达量可占植物总可溶蛋白的5.2％。

Integrated identification method of rheological model of sandstone in Sanmenxia bauxite

Based on the uniaxial compression creep experiments conducted on bauxite sandstone obtained from Sanmenxia,typical creep experiment curves were obtained.From the characteristics of strain component of creep curves,the creep strain is composed of instantaneous elastic strain,ε（me）,instantaneous plastic strain,ε（mp）,viscoelastic strain,ε（ce）,and viscoplastic strain,ε（cp）.Based on the characteristics of instantaneous plastic strain,a new element of instantaneous plastic rheology was introduced,instantaneous plastic modulus was defined,and the modified Burgers model was established.Then identification of direct screening method in this model was completed.According to the mechanical properties of rheological elements,one- and three-dimensional creep equations in different stress levels were obtained.One-dimensional model parameters were identified by the method of least squares,and in the process of computation,Gauss-Newton iteration method was applied.Finally,by fitting the experimental curves,the correctness of direct method model was verified,then the examination of posterior exclusive method of the model was accomplished.The results showed that in the improved Burgers models,the rheological characteristics of sandstone are embodied properly,microscopic analysis of creep curves is also achieved,and the correctness of comprehensive identification method of rheological model is verified.

Architecture design of GPS software receiver and implementation of its acquisition algorithm with fine frequency estimation

The design of a global positioning system （GPS） software receiver is introduced. This design uses the concept of software radio, and it consists of the following parts： front-end, acquisition, tracking, synchronization, navigation solution and some assisting modules. In the acquisition module, the acquisition algorithm based on circular correlation is utilized. The input data and the local code are converted into the frequency domain by means of the fast Fourier transform （FFT）. After performing circular correlation, the initial phase of the C/A code can be obtained and the cartier frequency can be found in 1 kHz frequency resolution, which is too coarse to use for the tracking loop. In order to improve the frequency resolution, the fine frequency estimation through a phase relationship is then achieved, by which, the frequency resolution is improved dramatically. Experiments show that the inaccuracy of the carrier frequency can be estimated within a few hertz by the fine frequency estimation method, and the fine frequency attained can be directly used for the tracking loop.

THREE-DIMENSIONAL TRAJECTORY OPTIMIZATION WITH DIRECT METHOD

The principle of direct method used in optimal control problem is introduced. Details of applying this method to flight trajectory generation are presented including calculation of velocity and controls histories. And capabilities of flight and propulsion systems are considered also. Combined with digital terrain map technique, the direct method is applied to the three dimensional trajectory optimization for low altitude penetration, and simplex algorithm is used to solve the parameters in optimization. For the small number of parameters, the trajectory can be optimized in real time on board.

Direct computing methods for turn flows in traffic assignment

Two methods based on a slight modification of the regular traffic assignmentalgorithms are proposed to directly compute turn flows instead of estimating them from link flows orobtaining them by expanding the networks. The first one is designed on the path-turn incidencerelationship, and it is similar to the computational procedure of link flows. It applies to thetraffic assignment algorithms that can provide detailed path structures. The second utilizes thelink-turn incidence relationship and the conservation of flow on links, a law deriving from thisrelationship. It is actually an improved version of Dial's logit assignment algorithm. The proposedapproaches can avoid the shortcomings both of the estimation methods, e. g. Furness's model andFrator's model, and of the network-expanding method in precision, stability and computation scale.Finally, they are validated by numerical examples.

The Mechanism of Eliminating Harmonic Resonance with Controllers and Application to the Power Systems

The phenomenon of anti-symmetrical bifurcation of periodic solutionsoccurring near an integral manifold is the intrinsic cause resulting in harmonic resonanceover-voltage in power systems. Due to this discovery, the principle of eliminating resonance byusing anti-bifurcation technique is presented, which makes that the theoretical bases of verymeasure to eliminate resonance are unified firstly from a point of view of basic theory. Ourdiscussion models depend on a class of nonlinear control model. Using the direct Lyapunov method, acomplete theoretical proof is given in accordance with the measure of eliminating resonance byconnecting nonlinear resistor in series to the neutral point of P. T., and the feedback control lawbeing applied. It comprises the action of parameters of resistor to eliminate resonance and theactual process of eliminating resonance, i.e., to go against bifurcation process which forces thebig harmonic solutions to retreat to the integral manifold gradually and disappear eventually, whichby using the nonlinear controllers. This makes it sure that the intrinsic cause of resonance iseliminated thoroughly. The obtained theory results and computing results are better than thepresented results.

PATH DEPENDENCE OF J-INTEGRAL IN WELDED JOINT WITH AN OVERMATCHING WELD

By elastic-plastic finite deformation finite element analysis (FEA), the conservation of J-integral is investigated in detail for a welded joint with an overmatchingweld in plane stress case. It is indicated that J-integral is path dependent under various conditions at least in the cases studied in this paper. Meanwhile, the above conclusions are verified by the hybrid method results in which combined Moire interferometry with FEA.

Direct Tunneling Effect in Metal-Semiconductor Contacts Simulated with Monte Carlo Method

Considering the tunneling effect and the Schottky effect,the metal semiconductor contact is simulated by using self consistent ensemble Monte Carlo method.Under different biases or at different barrier heights,the investigation into the tunneling current indicates that the tunneling effect is of great importance under reverse biases.The Schottky barrier diode current due to Schottky effect is in agreement with the theoretical one.The barrier lowering is found a profound effect on the current transport at the metal semiconductor interface.

Fatigue behavior of AZ31B magnesium alloy electron beam welded joint based on infrared thermography

Fatigue behavior of AZ31B magnesium alloy electron beam welded joint undergoing cyclic loading was investigated by infrared thermography. Temperature evolution throughout a fatigue process was presented and the mechanism of heat generationwas discussed. Fatigue limit of the welded joint was predicted and the fatigue damage was also assessed based ontheevolution of the temperatureand hotspot zone on the specimen surfaceduring fatigue tests. The presented results show that infrared thermography can not onlyquicklypredict the fatigue behavior of the welded joint, but also qualitatively identify the evolution of fatigue damage in real time. It is found that the predicted fatigue limit agrees well with the conventionalS-Nexperimental results. The evolution of the temperatureand hotspot zone on the specimen surface can be an effectivefatigue damage indicatorfor effectiveevaluationof magnesium alloy electron beam welded joint.

Evaluation of the Economic Loss Caused by Zhouqu Debris Flow

[Objective] The aim of this study was to evaluate the economic loss caused by Zhouqu debris flow. [Method] After the large debris flows happened on August 7, 2010 in Zhouqu, Gansu Province, we collected data at the first time after the disaster, and then built an assessment model to estimate the potential economic losses. [Result] The total loss reached 16.57×10^2 million Yuan, in which indirect economic loss was up to 2.42×10^2 million yaun while the actual direct economic loss was around 14.15×10^2 million Yuan. [Conclusion] The proportional coefficient method is a rapid and efficient method for evaluating the indirect loss caused by disasters.

N-S EQUATION CALCULATIONS ON MULTI-ELEMENT AIRFOILS WITH ZONAL PATCHED GRIDS

For a complex flow about multi-element airfoils a mixed grid method is set up. C-type grids are produced on each element′s body and in their wakes at first, O-type grids are given in the outmost area, and H-type grids are used in middle additional areas. An algebra method is used to produce the initial grids in each area. And the girds are optimized by elliptical differential equation method. Then C-O-H zonal patched grids around multi-element airfoils are produced automatically and efficiently. A time accurate finite-volume integration method is used to solve the compressible laminar and turbulent Navier-Stokes (N-S) equations on the grids. Computational results prove the method to be effective.

Determination of energy coupling to material in laser welding by a novel “sandwich” method

A mathematical energy coupling model was developed to analyze the light transmission in the keyhole and energy distribution on the keyhole wall.The main characteristics of the model include：1） a prototype of the keyhole and the inverse Bremsstrahlung absorption coefficient in the keyhole plasma are obtained from the experiments;2） instead of using a parallel incident beam,a focused laser beam with real Gaussian intensity distribution is implemented;3） both Fresnel absorption and inverse Bremsstrahlung absorption during multiple reflections are considered.The calculation results show that the distribution of absorbed laser intensity by the keyhole wall is not uniform.The maximum laser energy is absorbed by the bottom of the keyhole,although no rays irradiate directly onto the bottom.According to analysis of beam focusing characteristics,the location of the focal plane plays a more important role in the laser energy absorption by the front wall than by the rear wall.

SOLSM Channel Estimation for W CDMA

Estimation of Rayleigh fading channels using time multiplexed pilot symbols in W CDMA (FDD) is considered. Method of interpolation on a second order curve using the instantaneous channel estimation of two contiguous slots based on least square method (SOLSM) is presented. It is demonstrated by computer simulations that the channel distortion on data symbols in a slot can be estimated effectively compared to the method using simple linear interpolation, and the performance of the Rake combiner is improved effectively especially in fast moving cases.

EXPERIMENTAL STUDIES ON J-DOMINANCE IN HETEROGENEOUS WELDED JOINTS BY MOIRE INTERFEROMETRY

Moire interferometry method is introduced to study the feasibilities of J integral as a plastic singularity parameter at the tip of the notch in the welded joints. The results show that J dominance in most studied cases is not validated in v and u displacement fields. Therefore, it can be concluded that J-integral as controlling parameter used to estimate the safety of welded structures is not always valid.

Determination of interfacial adhesive properties for polymeric film by blister test

The interfacial adhesive properties ofpolypropylene/stainless steel were studied by the blister test. The polypropylene film with a squared free-standing window was pressured by oil from one side of film. The corresponding deformation field was observed by a digital speckle correlation method. The experimental results show that the squared film deforms and debonds from stainless steel with the increase of pressure. The debonding of the squared film in initiates from the center of edge and extends to the comer, and then the deformation of film evolves from square to circle shape. The interfacial adhesive energy of polypropylene/stainless steel is （22.60±1.55） J/m2, which is in agreement with that measured by film with a circular window.