Analysis of response time probability distribution of workflows

An evaluation approach for the response time probability distribution of workflows based on the fluid stochastic Petri net formalism is presented. Firstly, some problems about stochastic workflow net modeling are discussed. Then how to convert a stochastic workflow net model into a fluid stochastic Petri net model is described. The response time distribution can be obtained directly upon the transient state solution of the fluid stochastic Petri net model. In the proposed approach, there are not any restrictions on the structure of workflow models, and the processing times of workflow tasks can be modeled by using arbitrary probability distributions. Large workflow models can be efficiently tackled by recursively using a net reduction technique.

Fork-Join program response time on multiprocessors with exchangeable join

The Fork-Join program consisting of K parallel tasks is a useful model for a large number of computing applications. When the parallel processor has multi-channels, later tasks may finish execution earlier than their earlier tasks and may join with tasks from other programs. This phenomenon is called exchangeable join (EJ), which introduces correlation to the task’s service time. In this work, we investigate the response time of multiprocessor systems with EJ with a new approach. We analyze two aspects of this kind of systems: exchangeable join (EJ) and the capacity constraint (CC). We prove that the system response time can be effectively reduced by EJ, while the reduced amount is constrained by the capacity of the multiprocessor. An upper bound model is constructed based on this analysis and a quick estimation algorithm is proposed. The approximation formula is verified by extensive simulation results, which show that the relative error of approximation is less than 5%.

Finite Difference Solution of Response Time Delay of Magneto-rhelological Damper

Magneto-rhelological（MR） dampers are devices that employ rheological fluids to modify their mechanical properties. Their mechanical simplicity, high dynamic range, lower power requirements, large force capacity, robustness and safe maimer of operation in cases of failure have made them attractive devices for semi-active real-time control in civil, aerospace and automotive applications. Time response characteristic is one of the most important technical performances of MR dampers, and response time directly affects the control frequency, application range and the actual effect of MR dampers. In this study, one kind of finite difference solution for predicting the response time ofmagneto-rheological dampers from ＂off-state＂ to ＂on-state＂ is put forward. A laminar flow model is used to describe the flow in the MR valve, and a bi-viscous fluid flow model is utilized to describe the relationship of shear stress and shear rate of MR fluid. An explicit difference format is used to diseretize the Novior-Stoks equation, and stability condition of this algorithm is built by Von-Neumann stability criterion. The pressure gradient along the flow duct is solved by a dichotomy algorithm with iteration, and the changing curve of the damping force versus time of MR damper is obtained as well. According to the abovementioned numerical algorithm, the damping forces versus time curves from ＂off-state＂ to ＂on-state＂ of a cylindrical piston type MR damper are computed. Moreover, the MR damper is installed in a material test system（MTS）, the magnetic field in the wire circles of the MR damper is ＂triggered＂ when the MR damper is imposed to do a constant speed motion, and the damping force curves are recorded. The comparison between numerical results and experimental results indicates that this finite difference algorithm can be used to estimate the response time delay of MR dampers.

Time history of seismic earth pressure response from gravity retaining wall based on energy dissipation

The seismic design of gravity retaining walls is based mostly on the pseudo static method.The seismic earth pressure is assumed to be a constant without considering the wave traveling effect when the seismic wave propagates through the slope.However,under continuous ground motion,the actual earth pressure on the retaining wall varies with time.The present seismic earth pressure calculation method yields results that differ significantly from the actual scenario.Considering this,a slip surface curve was assumed in this study.It is more suitable for engineering practice.In addition,a theoretical calculation model based on energy dissipation was established.The time history of seismic earth pressure response under continuous ground motion was calculated using the equilibrium equation between the external power and the internal energy dissipation power of the sliding soil wedge.It can more effectively reflect the stress scenario of a retaining wall under seismic conditions.To verify the applicability of the proposed approach,a large-scale shaking table test was conducted,and the time history of the seismic earth pressure response obtained from the experiment was compared with the calculation results.The results show that the proposed approach is applicable to the calculation of the time history of seismic earth pressure response of gravity retaining walls.This lays the foundation for the seismic design of retaining structures by using dynamic time history.

The simulation of temperature dependence of responsivity and response time for 6H-SiC UV photodetector

In this paper the temperature dependence of responsivity and response time for 6H-SiC ultraviolet （UV） photodetector is simulated based on numerical model in the range from 300 K to 900 K. The simulation results show that the responsivity and the response time of device are less sensitive to temperature and this kind of UV photodetector has excellent temperature stability. Also the effects of device structure and bias voltage on the responsivity and the response time are presented. The thicker the drift region is, the higher the responsivity and the longer the response time are. So the thickness of drift region has to be carefully designed to make trade-off between responsivity and response time.

The Response Time Analysis of Digital Broadcasting System

Digital broadcasting system has become a high-light of research on computer application. To respond to the changes of the playbill in the broadcasting system in real time, the response time of the system must be studied. There is scarcely the research on this area currently. The influence factors in the response time are analyzed; the model on the response time of the system service is built; how the influence factors affect the response time of the system service is validated; and four improvement measures are proposed to minimize the response time of system service.

Strong-field response time and its implications on attosecond measurement

To measure and control the electron motion in atoms and molecules by the strong laser field on the attosecond time scale is one of the research frontiers of atomic and molecular photophysics. It involves many new phenomena and processes and raises a series of questions of concepts, theories, and methods. Recent studies show that the Coulomb potential can cause the ionization time lag(about 100 attoseconds) between instants of the field maximum and the ionization-rate maximum. This lag can be understood as the response time of the electronic wave function to the strong-field-induced ionization event. It has a profound influence on the subsequent ultrafast dynamics of the ionized electron and can significantly change the time–frequency properties of electron trajectory(an important theoretical tool for attosecond measurement). Here, the research progress of response time and its implications on attosecond measurement are briefly introduced.

An Improved Text-Based and Image-Based CAPTCHA Based on Solving and Response Time

CAPTCHA is an acronym that stands for Completely Automated Public Turing Test to tell Computers and Humans Apart(CAPTCHA),it is a good example of an authentication system that can be used to determine the true identity of any user.It serves as a security measure to prevent an attack caused by web bots(automatic programs)during an online transaction.It can come as text-based or image-based depending on the project and the programmer.The usability and robustness,as well as level of security,provided each of the varies and call for the development of an improved system.Hence,this paper studied and improved two different CAPTCHA systems(the text-based CAPTCHA and image-based CAPTCHA).The textbased and image-based CAPTCHAwere designed using JavaScript.Response time and solving time are the two metrics used to determine the effectiveness and efficiency of the two CAPTCHA systems.The inclusion of response time and solving time improved the shortfall of the usability and robustness of the existing system.The developed system was tested using 200 students from the Federal College of Animal Health and Production Technology.The results of each of the participants,for the two CAPTCHAs,were extracted from the database and subjected to analysis using SPSS.The result shows that textbased CAPTCHAhas the lowest average solving time(21.3333 s)with a 47.8%success rate while image-based CAPTCHA has the highest average solving time was 23.5138 s with a 52.8%success rate.The average response time for the image-based CAPTCHA was 2.1855 s with a 37.9%success rate lower than the text-based CAPTCHA response time(3.5561 s)with a 62.1%success rate.This indicates that the text-based CAPTCHA is more effective in terms of usability tests while image-based CAPTCHA is more efficient in terms of system responsiveness and recommended for potential users.

Response time of variable transparency glass and its application to welding goggles

The behavior of variable transparency glass is studied, and the response time analyzed and measured aimed at applications to welding goggles. Detection apparatus for goggle testing is involved in the design and development. Charac-teristics of the apparatus are discussed based on experiments. The definition of nominal response time and effective response time are presented based on the analysis and calculation with experimental data.

The Application of Information Systems to Improve Ambulance Response Times in the UK

Emergency ambulance services in the UK are tasked with providing pre-hospital patient care and clinical services with a target response time between call connect to on-scene attendance.In 2017,NHS England introduced four new response time categories based on patient needs.The most challenging is to be on-scene for a life-threatening situation within seven minutes of the call being connected when such calls are random in terms of time and place throughout a large territory.Recent evidence indicates emergency ambulance services regularly fall short of achieving the target ambulance response times set by the National Health Service(NHS).To achieve these targets,they need to undertake transformational change and apply statistical,operations research and artificial intelligence techniques in the form of five separate modules covering demand forecasting,plus locate,allocate,dispatch,monitoring and re-deployment of resources.These modules should be linked in real-time employing a data warehouse to minimise computational data and generate accurate,meaningful and timely decisions ensuring patients receive an appropriate and timely response.A simulation covering a limited geographical area,time and operational data concluded that this form of integration of the five modules provides accurate and timely data upon which to make decisions that effectively improve ambulance response times.

Response Analysis of Tension-Based Tension Leg Platform Under Irregular Waves

Tension Leg Platform（TLP） is a hybrid structure used as oil drilling and production facility within water depths of 1200 m. The extension of this TLP concept to deeper waters is a challenge and warrants for some innovative design concepts. In this paper, a relatively new concept of TLP which is christened as Tension-Based Tension Leg Platform（TBTLP） and patented by Srinivasan（1998） has been chosen for study. Response analysis of TLP with one tension base under irregular waves for three different sea states has been performed using hydrodynamic tool ANSYS？ AQWA？. Results are reported in terms of RAOs, response spectrums for surge, heave and pitch degrees of freedom from which spectral statistics have been obtained. The statistics of TBTLP have been compared with TLPs（without tension base） for two different water depths to highlight the features of the new concept. The effect of viscous damping and loading effects on the RAOs are also investigated.

Transient impact responses of laminated composite cylindrical shells

The generalized ray method(GRM) has been successfully used to study the transient elastic wave transmitting in the beams,planar trusses,space frames and infinite layered media.In this letter,the GRM is extended to investigate the early short time transient responses of laminated composite cylindrical shells under impact load.By using the Laplace transformation and referring to the boundary conditions,the ray groups transmitting in the finite laminated cylindrical shells under the shock load are obtained and the transient response related to each ray group can be derived via FFT algorithm.From the numerical results,it is shown that the early short time transient accelerations of the laminated composite cylindrical shell under impact loads are very large.But the short time transient shear strain and displacement are very small.

Global qualitative analysis of new Monod type chemostat model with delayed growth response and pulsed input in polluted environment

In this paper, we consider a new Monod type chemostat model with time delay and impulsive input concentration of the nutrient in a polluted environment. Using the discrete dynamical system determined by the stroboscopic map, we obtain a ＂microorganism-extinction＂ periodic solution. Further, we establish the sufficient conditions for the global attractivity of the microorganism-extinction periodic solution. Using new computational techniques for impulsive and delayed differential equation, we prove that the system is permanent under appropriate conditions. Our results show that time delay is ＂profitless＂.

Oscillation in Response and Recovery Properties of SnO_2 Gas Sensor

Six kinds of Sn(OH)_4 precipitates were prepared by the chemical precipitation method (liquid-phase),of which the pH values are 3.0 (sample 1),4.5 (sample 2),6.0 (sample 3),7.5 (sample 4),9.0 (sample 5) and 10.5 (sample 6),respectively. After washed and dried,the Sn(OH)_4 precipitates were first calcined into tin oxide powder.Six kinds of gas sensors were made from the obtained SnO_2 powders.The XRD patterns of all the samples were recorded.The sensing properties of all samples to C_2H_5OH and H_2 gases were measured in different gas concentrations and temperatures,including the sensitivities of all samples,their response and recovery properties.The recovery properties of all samples to C_2H_5OH exhibit the sinusoidal oscillation character.

Role of CuO-ZnO Heterojunctions in Gas Sensing Response of CuO-ZnO Thick Films

The CuO-doped ZnO thick films were prepared by the screen printing technique. The CuO doped ZnO composite materials were obtained by mixing AR grade （99.9% pure） Zinc Oxide powder mechanochemically in acetone medium with various weight percentages of Copper Chloride （CulCI2.2H20） powder （1, 3, 5, 7 and 9wt.%）. The prepared materials were sintered at 1,000 ℃ for 12 h in air ambience and ball milled to ensure sufficiently fine particle size. The films were characterized by different techniques with respect to their surface morphology and compositional property by means of SEM （scanning electron microscope） and EDXA （energy dispersive x-ray analysis）. The surface morphology of the films was studied by SEM and it shows the films are porous in nature and petal-shaped grains of sizes varies from 220 nm to 250 nm were observed. The final composition of each film was determined by the EDXA analysis. The gas response of undoped ZnO and CuO doped ZnO films was studied for different gases such as CO, C12, NH3, Ethanol, H2S and LPG at operating temperature ranging from 50 ℃ to 400 ℃. The 7wt.% CuO-doped ZnO film shows good response to H2S gas （100 ppm） at 250 ℃.

Tunable magneto optic modulation based on magnetically responsive nanostructured magnetic fluid

Magnetic fluid is a kind of functional composite material with nanosized structure and unique optical properties. The tunable magneto-optic modulation of magnetic fluid under external magnetic field, achieved by adjusting the polarization direction of incident light, is investigated theoretically and experimentally in this work. The corresponding modulation depth and response time are obtained. The accompanying mechanisms are clarified by using the theory of dichroism of magtietic fluid and the aggregation/disintegration processes of magnetic particles within magnetic fluid when the external magnetic field turns on/off.

Slowed driving-reaction time following concussion-symptom resolution

Background:Concussed patients have impaired reaction time(RT)and cognition following injury that may linger and impair driving performance.Limited research has used direct methods to assess driving-RT post-concussion.Our study compared driving RT during simulated scenarios between concussed and control individuals and examined driving-RT’s relationship with traditional computerized neurocognitive testing(CNT)domains.Methods:We employed a cross-sectional study among 14 concussed(15.9±9.8 days post-concussion,mean±SD)individuals and 14 healthy controls matched for age,sex,and driving experience.Participants completed a driving simulator and CNT(CNS Vital Signs)assessment within 48 h of symptom resolution.A driving-RT composite(ms)was derived from 3 simulated driving scenarios:stoplight(green to yellow),evasion(avoiding approaching vehicle),and pedestrian(person running in front of vehicle).The CNT domains included verbal and visual memory;CNT-RT(simple-,complex-,Stroop-RT individually);simple and complex attention;motor,psychomotor,and processing speed;executive function;and cognitive flexibility.Independent t tests and Hedge d effect sizes assessed driving-RT differences between groups,Pearson correlations(r)examined driving RT and CNT domain relationships among cohorts separately,and p values were controlled for false discovery rate via Benjamini-Hochberg procedures(a=0.05).Results:Concussed participants demonstrated slower driving-RT composite scores than controls(mean difference=292.86 ms;95%confidence interval(95%CI):70.18515.54;p=0.023;d=0.992).Evasion-RT(p=0.054;d=0.806),pedestrian-RT(p=0.258;d=0.312),and stoplight-RT(p=0.292;d=0.585)outcomes were not statistically significant after false-discovery rate corrections but demonstrated medium to large effect sizes for concussed deficits.Among concussed individuals,driving-RT outcomes did not significantly correlate with CNT domains(r-range:0.51 to 0.55;p>0.05).No correlations existed between driving-RT outcomes and CNT domains among control participants either(r-range:0.52 to 0.72;p>0.05).Conclusion:Slowed driving-RT composite scores and large effect sizes among concussed individuals when asymptomatic signify lingering impairment and raise driving-safety concerns.Driving-RT and CNT-RT measures correlated moderately but not statistically,which indicates that CNT-RT is not an optimal surrogate for driving RT.

Changes in brain activation patterns according to cross-training effect in serial reaction time task An functional MRI study

Cross-training is a phenomenon related to motor learning, where motor performance of the untrained limb shows improvement in strength and skill execution following unilateral training of the homologous contralateral limb. We used functional MRI to investigate whether motor performance of the untrained limb could be improved using a serial reaction time task according to motor sequential learning of the trained limb, and whether these skill acquisitions led to changes in brain activation patterns. We recruited 20 right-handed healthy subjects, who were randomly allocated into training and control groups. The training group was trained in performance of a serial reaction time task using their non-dominant left hand, 40 minutes per day, for 10 days, over a period of 2 weeks. The control group did not receive training. Measurements of response time and percentile of response accuracy were performed twice during pre- and post-training, while brain functional MRI was scanned during performance of the serial reaction time task using the untrained right hand. In the training group, prominent changes in response time and percentile of response accuracy were observed in both the untrained right hand and the trained left hand between pre- and post-training. The control group showed no significant changes in the untrained hand between pre- and post-training. In the training group, the activated volume of the cortical areas related to motor function （i.e., primary motor cortex, premotor area, posterior parietal cortex） showed a gradual decrease, and enhanced cerebellar activation of the vermis and the newly activated ipsilateral dentate nucleus were observed during performance of the serial reaction time task using the untrained right hand, accompanied by the cross-motor learning effect. However, no significant changes were observed in the control group. Our findings indicate that motor skills learned over the 2-week training using the trained limb were transferred to the opposite homologous limb, and motor skill acquisition of the untrained limb led to changes in brain activation patterns in the cerebral cortex and cerebellum.

The Real-Time Arc Protection Circuit for ECRH on HL-2A Tokamak

In 2005 year, SWIP carded through a general engineering and physics experiment of ECRH on HL-2A tokamak. The ECRH protection system is studied and set up to insure the security of ECRH system, and the work is normal. The main protection object of all ECRH system is the gyrotron, and the arc protection for it is more important in the protection system.

Treat to target in Crohn’s disease:A practical guide for clinicians

A treat-to-target(T2T)approach applies the principles of early intervention and tight disease control to optimise long-term outcomes in Crohn's disease.The Selecting Therapeutic Targets in Inflammatory Bowel Disease(STRIDE)-II guidelines specify short,intermediate,and long-term treatment goals,documenting specific treatment targets to be achieved at each of these timepoints.Scheduled appraisal of Crohn’s disease activity against pre-defined treatment targets at these timepoints remains central to determining whether current therapy should be continued or modified.Consensus treatment targets in Crohn’s disease comprise combination clinical and patient-reported outcome remission,in conjunction with biomarker normalisation and endoscopic healing.Although the STRIDE-II guidelines endorse the pursuit of endoscopic healing,clinicians must consider that this may not always be appropriate,acceptable,or achievable in all patients.This underscores the need to engage patients at the outset in an effort to personalise care and individualise treatment targets.The use of non-invasive biomarkers such as faecal calprotectin in conjunction with cross-sectional imaging techniques,particularly intestinal ultrasound,holds great promise;as do emerging treatment targets such as transmural healing.Two randomised clinical trials,namely,CALM and STARDUST,have evaluated the efficacy of a T2T approach in achieving endoscopic endpoints in patients with Crohn’s disease.Findings from these studies reflect that patient subgroups and Crohn’s disease characteristics likely to benefit most from a T2T approach,remain to be clarified.Moreover,outside of clinical trials,data pertaining to the real-world effectiveness of a T2T approach remains scare,highlighting the need for pragmatic real-world studies.Despite the obvious promise of a T2T approach,a lack of guidance to support its integration into real-world clinical practice has the potential to limit its uptake.This highlights the need to describe strategies,processes,and models of care capable of supporting the integration and execution of a T2T approach in real-world clinical practice.Hence,this review seeks to examine the current and emerging literature to provide clinicians with practical guidance on how to incorporate the principles of T2T into routine clinical practice for the management of Crohn’s disease.